Solar RRL
·
2021
·Vol. 6
·期 4
·2100798
·
IF 8.582
Manjing Wang,Sanlong Wang,Qixing Zhang,Sanjiang Pan,Ying Zhao,Xiaodan Zhang
Finding a cost-effective semiconductor with commercial performance for photoelectrochemical (PEC) water splitting remains challenging. Sb 2 Se 3 , as a low-cost semiconductor, has excellent photo/electric properties for PEC water splitting. Via adjusting the Sb/Se ratio in the precursor ink, the Sb 2 Se 3 with favorable crystallographic orientation can be effectively controlled. The ink with an atomic ratio of Sb/Se = 1:3 induces the growth of a compact Sb 2 Se 3 film with a preferred orientation, resulting in rapid charge transport and high photocurrent. After depositing TiO 2 and Pt in turn, the photocathode with a structure of FTO/Au/Sb 2 Se 3 /TiO 2 /Pt exhibits a photocurrent density of 11.3 mA cm −2 at 0 V RHE . An unassisted solar water splitting device integrating the Sb 2 Se 3 -based photocathode with an inorganic perovskite photovoltaic cell achieves a solar-to-hydrogen efficiency of 2.45%. The efficient Sb 2 Se 3 -based photocathode shows promising potential for solar fuel production.
研究领域:
材料科学
·
物理化学
·
能源化学
·
半导体光电化学
·
可再生能源
✓ 已验证
DOI
高影响因子
Advanced Materials Interfaces
·
2018
·Vol. 6
·期 3
·1801663
·
IF 4.834
Wentian Huang,Qingwei Zhou,Shaoqiang Su,Jing Li,Xubin Lu,Xingsen Gao,Xin Wang,Mingliang Jin,Guofu Zhou,Zhang Zhang,Junming Liu
Loading 2D layered transition metal dichalcogenides (TMDs) on p-type silicon photocathode is suitable for hydrogen production in solar-driven photoelectrochemical (PEC) water splitting. Similarly, various nanostructured TMDs exposing more active sites are widely explored for improving the PEC performances of composite photoelectrodes. Here, defect engineering using a controllable argon ion beam bombardment is presented on ReS 2 /Si photocathode. The atomic vacancy defects are introduced on the 2D ReS 2 to realize high-density active sites, which significantly enhance the solar-driven hydrogen evolution reaction performance of ReS 2 /Si photocathode. The highest photocurrent density of 18.5 mA cm −2 (at 0 V vs reversible hydrogen electrode) is achieved, under a simulated sun irradiation.
研究领域:
材料科学
·
光催化
·
能源化学
·
半导体器件
·
纳米科技
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Zhengjian Li,Sian Chen,Liting Cui,Haining Wang,Shanfu Lu,Yan Xiang
The acidic-alkaline interface of a bipolar membrane fuel cell (BPMFC) is the place to generate water, which significantly affect the output performance of BPMFC by regulating the water distribution due to the ion conductivity and oxygen reduction reaction (ORR) kinetics in cathode. To investigate the influence of water diffusivity ( D w ) on the water distribution, four alkaline polymer electrolytes with different D w is selected as anion exchange membrane or alkaline electrolyte ionomer to assemble BPMFCs. A combined experimental and simulated study reveals the positive correlation relationship of D w to the water distribution and performance of BPMFC. By increasing the D w of the alkaline polymer electrolytes, the interfacial-generated water amount can be increased and promptly transport to the cathode, thereby satisfying the ion conductivity and increasing the ORR kinetics, and breakthrough the peak power density of the BPMFC with 1.06 W cm −2 without humidification .
研究领域:
电化学
·
能源材料
·
燃料电池
·
高分子科学
·
界面科学
✓ 已验证
DOI
高影响因子
Small
·
2023
·Vol. 19
·期 40
·2303227
·
IF 13.3
YuanZhe Wu,Quan Zong,Chaofeng Liu,Yanling Zhuang,Daiwen Tao,Jiangying Wang,Jingji Zhang,Qilong Zhang,Guozhong Cao
Vanadyl phosphate (VOPO 4 ·2H 2 O) has been regarded as one of the most promising cathode materials for aqueous Zn-ion batteries due to its distinct layered structure. However, VOPO 4 ·2H 2 O has not yet demonstrated the exceptional Zn ion storage performance owing to the structural deterioration during repeated charging/discharging process and poor intrinsic conductivity. In this work, 2D sodium vanadyl phosphate (NaVOPO 4 ·0.83H 2 O, denoted as NaVOP) is designed as a cathode material for Zn-ion batteries, in which sodium ions are preinserted into the interlayer, replacing part of water. Benefiting from the in situ surface oxidization, improved electronic conductivity, and increased hydrophobicity, the NaVOP electrode exhibits a high discharge capacity of 187 mAh g −1 at 0.1 A g −1 after activation, excellent rate capability and enhanced cycling performance with 85% capacity retention after 1500 cycles at 1 A g −1 . The energy storage mechanism of the NaVOP nanoflakes based on the rapid Zn 2+ and H + intercalation pseudocapacitance are investigated via multiple ex situ characterizations.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机化学
·
纳米材料
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Chao Yang,Jun Yang,Ge Song,Limin Zang,Qifan Liu,Jianhui Qiu,Xue Yang,Chun Wang
Oil/water separation has recently attracted a great deal of attention for research due to the frequent occurrence of an oil spill as well as the increase of industrial and household oily wastewater. Therefore, the purpose of this study is to demonstrate underwater superoleophobic crosslinked phosphorylated poly(vinyl alcohol) hydrogel coated stainless steel mesh (CL-PPVA@SSM), which was fabricated using a simple dip-coating method and aldol reaction on the mesh substrate. The as-prepared CL-PPVA@SSM is capable of separating oil from a variety of different oil/water mixtures with high separation efficiency up to 99.2%, excellent recyclability and fast water permeate flux of 467.7 L m –2 h –1 , which makes it suitable for the separation of oil-water mixtures from oil-water emulsions. Also, in the oil-water separation process, the CL-PPVA@SSM is capable to remove organic dye from the water. The CL-PPVA@SSM exhibits stability under various harsh conditions such as mechanical abrasion. Importantly, the CL-PPVA@SSM shows a massive potential to separate kitchen waste oil/water mixtures due to the underwater superoleophobic property as required for the recycling of kitchen waste oil. Therefore, this method has been met with a promising application prospect of practical application.
研究领域:
材料科学
·
环境工程
·
高分子化学
·
表面工程
·
化学工程
·
纳米技术
·
水处理技术
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2016
·Vol. 4
·期 25
·9816-9821
·
IF 8.262
Li Cheng,Qing Chang,Yu Chang,Nannan Zhang,Changyuan Tao,Zhaona Wang,Xing Fan
Hierarchical forest-like photoelectrodes were prepared by assembling nano-ZnO on an array of micro-metal dendrites, aiming to demonstrate the idea of highly efficient photon-harvesting inside a biomimetic dendrite structure. Via a facile aqueous electrochemical deposition process, the metal dendrites were deposited on both flat and wire substrates with different alignments, showing wide adaptability. A strong, broadband anti-reflection effect was observed, owing to the diffuse reflection inside the microdendrites. By increasing the dendrite height, the overall reflectivity of the metal electrode can be reduced from 75% to 45%, which could be further reduced to 12% after combining with acicular-leaf-like ZnO nanoarrays. Its applications in light-driven water splitting were successfully demonstrated. Taking advantage of the forest-like photoelectrode, we have artificially constructed an efficient photo-electrochemical system similar to plants in a forest, with photons harvested by the crown-like photoanodes in the sunshine, and synthetic reactions driven by the root-like electrode in the shadow.
研究领域:
材料科学
·
纳米科技
·
光电化学
·
可再生能源
·
仿生学
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·Vol. 47
·期 33
·14916-14929
·
IF 7.139
Hongzhi Wang,Chunxiao Wang,Weiguo Zhang,Suwei Yao
Developing non-noble metal catalysts with excellent electrocatalytic performance and stability is of great significance to hydrogen production by water electrolysis, but there are still problems of low activity, complex preparation and high cost. Herein, we fabricated a novel Ni 3 S 2 /Ni(OH) 2 dual-functional electrocatalyst by a one-step fast electrodeposition on nickel foam (NF). While maintaining the electrocatalytic performance of Ni 3 S 2 , the existence of heterostructure and Ni(OH) 2 co-catalyst function greatly improves the overall water splitting performance of Ni 3 S 2 /Ni(OH) 2 –NF. Hence, It shows a low overpotential of 66 mV at 10 mA cm −2 for HER and 249 mV at 20 mA cm −2 for OER. The dual-functional electrocatalyst needs only 1.58 V at 20 mA cm −2 when assembled two-electrode electrolytic cell. Impressively, the electrocatalyst also shows outstanding catalytic stability for about 800 h when 20 and 50 mA cm −2 constant current was applied, respectively which demonstrates a potential electrocatalyst for overall water splitting.
研究领域:
材料科学
·
电化学
·
能源催化
·
纳米材料
·
可持续能源
·
功能材料
·
界面化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）