JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Chenglin Gong,Lin Lin,Yingzhen Wu,Yanan Zhang,Zhuohong Feng,Zhezhe Wang,Yantang Huang,Zhiqiang Zheng
In this paper, Cs 2 NaErCl 6 double perovskites microcrystals (MCs) co-doped with Yb 3+ and Bi 3+ are successfully synthesized by a simple “dissolving-drying” method. When excited at 379 nm, 808 nm and 980 nm, the MCs show strong red, green and yellow light, respectively, which can be well distinguished by the naked eyes. On this basis, two kinds of systems are designed with doped/undoped MCs for triple-mode fluorescent anti-counterfeiting and information encryption of numbers and characters. The results indicate that our MCs are not only beneficial to the application of fluorescent anti-counterfeiting, but also greatly improve the security of anti-counterfeiting. In addition, we evaluate the temperature sensing performance of these MCs by fluorescence intensity ratio technique. The samples show a high relative sensitivity as 3.8 %/K at 243 K. The results show that the samples have multi-functional applications in the fields of fluorescent anti-counterfeiting and temperature sensing, and this work will broaden the application fields of lead-free double perovskites in fluorescent anti-counterfeiting and temperature sensing.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2022
·
IF 5.436
Shuai Huang,Mengmeng Shang,Yu Yan,Peipei Dang,Jun Lin
Co-doping mixed-valence Eu2+/3+ in a single-phase phosphor is an efficient method to realize the emission color regulation, which holds great potential for anticounterfeiting and ratiometric temperature sensing. Here, the mixed-valence Eu-doped Sr1.95+xLi1–xSi1–xAlxO4F (0 ≤ x ≤ 0.25) phosphors were designed and prepared under a reducing atmosphere. The correlation of local phase structures and luminescence properties was discussed. Replacing Si4+–Li+ ion pairs with Al3+–Sr2+ ion pairs compresses the Sr sites occupied by Eu2+, and it stabilizes Eu3+ in a reducing atmosphere and leads to the coexistence of Eu2+ and Eu3+ in single-phase Sr1.95+xLi1–xSi1–xAlxO4F:0.05Eu (0 ≤ x ≤ 0.25) phosphors. Based on the wavelength-dependent luminescence color behaviors of Sr1.95+xLi1–xSi1–xAlxO4F:0.05Eu phosphors, the fluorescent anticounterfeit papers/patterns containing Sr1.95+xLi1–xSi1–xAlxO4F:0.05Eu phosphors were the same as ordinary paper under ambient conditions. However, the hidden colors or images can be read out with green-orange luminescence under 365/300 nm light excitation. Benefiting from the diverse thermal response emission behaviors of Eu2+ (530 nm) and Eu3+ (703 nm), Sr1.95+xLi1–xSi1–xAlxO4F:0.05Eu phosphors exhibit temperature sensing performances, with the maximum absolute and relative sensitivity being 0.0294 K–1 at 573 K and 0.83% K–1 at 348 K. More importantly, Sr1.95+xLi1–xSi1–xAlxO4F:0.05Eu phosphors showed excellent stability in humid, acid, and alkali environments, which contributed to applying mixed-valence Eu2+/3+-doped Sr1.95+xLi1–xSi1–xAlxO4F to the fields of multicolor anticounterfeiting and noncontact optical thermometry.
研究领域:
材料科学
·
光学
✓ 已验证
DOI
高影响因子
Materials Today
·
2025
·
IF 22
Xuan Ye,Ruipeng Zhang,Yahui Zhao,Shuai Wen,Tongtong Li,Zhaorui Zhang,Hongyun Qiu,Shaobo Ji
Thermoelectric (TE) materials have been extensively used in self-powered temperature sensing devices, especially flexible sensors that require low energy consumption. One of their important features is the flexibility that allows conformal contact with various subjects and tolerance to mechanical deformation. However, realizing both high TE conversion efficiency and excellent flexibility remains a significant challenge. Here, a general method was developed to produce stretchable high-performance TE composites and achieved asymmetric composite thermoelectric materials (ACTE) with high Seebeck coefficient (215 μV·K −1 for n-type, 175 μV·K −1 for p-type). The fully stretchable temperature sensors (FSTS) fabricated from ACTE exhibited good flexibility which could withstand 50 % uniaxial tensile strain and 30 % biaxial strain with low thicknesses (∼650 μm) that allowed for good contact on curved surfaces. The sensitivity of FSTS reached ∼145 μV·K −1 with 18 n/p ACTE pairs and ∼37 μV·K −1 with 2 pairs and could output stable signals regardless of flexural or tensile deformation. The FSTS was also fabricated into an array that could be worn as sensors or electronic skin with temperature sensing and mapping abilities. This work not only produced fully stretchable TE devices but also provided a general method for the fabrication of other high-performance stretchable composites and devices.
研究领域:
生物医学工程
·
柔性电子学
·
热电转换技术
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 63
·58113-58117
·
IF 3.289
Guangguang Huang,Chunlei Wang,Xiaojing Xu,Yiping Cui
We reported an optical ratiometric temperature sensor via dopant-dependent dual emissions in Ag&Mn:ZnInS QDs. For QDs, the Ag-related emission is around 485 nm arising from the radiative recombination of the captured electrons' anion vacancies with holes trapped at the Ag dopant level. The energy level of anion vacancies is just below the conduction band, which can attain thermal equilibrium easily without further energy level adjusting. Moreover, Mn-related emission is around 585 nm via the Mn2+ ligand-field transition from 4T1 to 6A1. Mn-related thermal equilibrium is effectively suppressed due to the large energy gap between the conduction band and 4T1 energy level. These features not only obtain the opportunity to use the photoluminescence temperature specificity of Ag and Mn for ratiometric temperature sensing, but also make the flash synthetic approach via a pot non-injection possible. This temperature sensor, designed with Ag&Mn:ZnInS QDs, exhibits good temperature sensitivity (∼0.227% °C−1) and high QY (20%).
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
Scientific Reports
·
2024
·Vol. 14
·期 1
·1-9
·
IF 3.8
Liu Yongtao,Duan Bin,Zhou Lin,Wu Yuxiang,Wang Fengyi,Ding Changchun,Hu Junshan
Here, this study reports single-band red upconversion emission in β-Ba 2 ScAlO 5 : Yb 3+ /Er 3+ phosphor by doping Mn 2+ . The optimum concentration of Mn 2+ ions in β-Ba 2 ScAlO 5 : Yb 3+ /Er 3+ phosphor was 0.20. The intensity of red and green emissions is increased by 27.4 and 19.3 times, respectively. Compared with the samples without Mn 2+ ions, the red-green integral strength ratio of β-Ba 2 ScAlO 5 : Yb 3+ /Er 3+ /Mn 2+ sample was significantly increased by 28.4 times, reaching 110.9. The UCL mechanism was explored by analyzing the down-conversion luminescence spectra, absorption spectra, UCL spectra, and upconversion fluorescence lifetime decay curves of Yb 3+ /Er 3+ /Mn 2+ co-doped β-Ba 2 ScAlO 5 . The enhancement of upconversion red light is achieved through energy transfer between defect bands and Er 3+ ions, as well as energy transfer between Mn 2+ ions and Er 3+ ions. In addition, the Mn 2+ doped β-Ba 2 ScAlO 5 : Yb 3+ /Er 3+ red UCL phosphors have great potential for ambient temperature sensing in the 298–523 K temperature range. The maximum sensitivity of β-Ba 2 ScAlO 5 : Yb 3+ /Er 3+ /Mn 2+ phosphor as a temperature sensor at 523 K is 0.0247 K −1 .
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
OPTICS EXPRESS
·
2017
·Vol. 25
·期 16
·19065-19076
·
IF 3.307
Qi Ding,Xiaosong Zhang,Lan Li,Xiabing Lou,Jianping Xu,Ping Zhou,Ming Yan
Quantum dots (QDs) exhibit not only wide tunability of luminescence but also complex optical properties because of the large degree of freedom in their structure and chemical composition. Quaternary ZnxAgInSe QDs with different Zn/Ag ratios were synthesized and examined as temperature sensors. The relationship among the luminescence energy, emission intensity, and full-width at half-maximum (FWHM) of the emission band at different temperatures was investigated. To understand the photoluminescence mechanism, time-resolved photoluminescence spectra were recorded. Moreover, the dependence of the luminescence peak energy and FWHM on temperature was investigated, and a small deviation from the actual temperature was observed, indicative of the use of ZnxAgInSe QDs as high sensitivity temperature sensors.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 47
·24612-24618
·
IF 3.708
Yangyang Li,Ben Q. Li
An optical-thermal experimental system, in which CdTe quantum dots (QDs) were used as thermal sensors, is developed for micro-electromechanical system (MEMS) temperature measurements in the high temperature range (>70 °C). Laboratory-prepared CdTe QDs with suitably controlled synthesis conditions show excellent temperature sensitivity. For orange emitting CdTe QDs, calibration from a type A micro-heater yields a linear relation between the spectral peak shift and the temperature over the temperature range of 27 °C to 170 °C, the last being the highest temperature of the heater achieved in our current optical-thermal experimental setup. This linear relation is consistent with the predictions for semiconductor quantum systems from the principle of thermo-quantum mechanics for the temperature above the Debye point. Analysis of the experimental data indicates that the orange emitting QDs possess a thermally-induced spectral-shift sensitivity of 0.34 nm °C−1, which is approximately about 2–3 times better than reported. The excellent repeatability and accuracy of the calibrated orange emitting CdTe QDs as thermal sensors are further demonstrated by applying them in monitoring electric thermal characteristics of type B MEMS structures. While calibration is for up to 170 °C, the temperature of up to 212 °C for the type B MEMS heater was measured with a satisfactory accuracy using the CdTe QDs, further demonstrating the stability of the thermal-spectral properties of the QDs. The existence of a unique “burnout” spectrum in the temperature dependent PL spectra also suggests that optical-thermally sensitive QDs can be applied in both monitoring the temperature development and diagnosing circuit breakout due to over-heating.
研究领域:
材料科学
·
光学工程
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
Materials Research Express
·
2018
·Vol. 5
·期 6
·066204
·
IF 1.151
Tao Pang,Zejun Huang
In this paper, a novel upconversion phosphor is reported. Based on XRD and EDS, it is confirmed that the phosphor is monoclinic Gd2Mo4O15:Yb3+, Ho3+ with P21/c space group. The non-radiation decay of 5I6 to 5I7 dominants the depopulation of 5I6, thus the phosphor produces the red upconversion emission with high emission intensity and good color quality, and shows the favorable temperature sensing property. When using non-continuous excitation mode, the temperature sensitivity is determined as 0.0452 K−1. Because the sensitivity is the same at any temperature, the new upconversion material may have greater potential for temperature sensing application than Er3+ doped upconverison materials.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
OPTICAL MATERIALS
·
2019
·
IF 2.687
Xiuna Tian,Hongjian Dou,Lingyuan Wu
Upconversion (UC) luminescent materials have received much attention due to their unique luminescent properties and potential applications in various fields. Yb 3+ /Tm 3+ codoped NaBiF 4 UC material has been successfully synthesized through a solvothermal method. With the excitation of 980 nm laser light, NaBiF 4 :Yb 3+ /Tm 3+ powder show strong UC luminescence. Especially, the near-infrared (NIR) UC emission band of NaBiF 4 :Yb 3+ /Tm 3+ centered at 800 nm is 49 times stronger than the blue emission band. The temperature-dependent UCL properties of NaBiF 4 :Yb 3+ /Tm 3+ were investigated systematically under 980 nm excitation. The results show that all the UC emission peaks of NaBiF 4 : Yb 3+ /Tm 3+ in the region from 300 to 900 nm decrease with the temperature increase except for the emission peak at 697 nm which is positively correlated with temperature. And the UC emissions of NaBiF 4 : Yb 3+ /Tm 3+ exhibits high temperature sensitivity between 303 and 443 K. Therefore, NaBiF 4 : Yb 3+ /Tm 3+ material with strong NIR UCL could be a potential candidate for sensitive temperature sensor .
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2022
·
IF 4.632
Mingze Zhang,Lin Lin,Zhuohong Feng,Zhezhe Wang,Yuanming Yang,Wenjun Ma,Jieyi Cai,Pan Lu,Siyi Jia,Zhiqiang Zheng
In this work, catena-[(μ-benzene-1,3,5-tricarboxylato)-(1,10-phenanthroline)-( N , N -dimethylformamide)-gadolinium(iii)- N,N -dimethylformamide solvate] (denoted as Gd-MOF) co-doped with Eu 3+ and Dy 3+ was successfully synthesized. The entire X-ray diffraction peaks of the sample match well with the Gd-MOF phase. A detailed characterization by inductively coupled plasma mass spectrometry (ICP-MS) shows that the actual concentration is basically consistent with the design concentration. The temperature sensing properties of Gd-MOF:Eu 3+ ,Dy 3+ were analyzed by temperature-dependent fluorescence spectra from 213 to 453 K. As temperature rises, the emission color of Gd-MOF:Eu 3+ ,Dy 3+ changes from yellow to red. The relative sensitivity reaches a maximum of 5.87%/K at 383 K in the Gd-MOF:1%Eu 3+ ,30%Dy 3+ sample. The high relative sensitivity of this MOF is due to the phonon-assisted energy transfer from Dy 3+ to Eu 3+ , which is proved via fluorescence decay curves and fluorescence spectra. The major route of this energy transfer is 4 F 9/2 (Dy 3+ ) → 5 D 1 (Eu 3+ ).
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
Microsystems & Nanoengineering
·
2023
·Vol. 9
·期 1
·1-13
·
IF 7.9
Luo Yunyun,Zhao Libo,Luo Guoxi,Dong Linxi,Xia Yong,Li Min,Li Ziping,Wang Kaifei,Maeda Ryutaro,Jiang Zhuangde
Flexible electronics have demonstrated various strategies to enhance the sensory ability for tactile perception and wearable physiological monitoring. Fibrous microstructures have attracted much interest because of their excellent mechanical properties and fabricability. Herein, a structurally robust fibrous mat was first fabricated by electrospinning, followed by a sequential process of functionalization utilizing ultrasonication treatment and in situ polymerization growth. Electrospun polyurethane (PU) microfibers were anchored with multi-walled carbon nanotubes (MWCNTs) to form conductive paths along each fiber by a scalable ultrasonic cavitation treatment in an MWCNT suspension. After, a layer of poly(3,4-ethylene dioxythiophene) (PEDOT) was grown on the surface of PU fibers decorated with MWCNTs to enhance the conductive conjunctions of MWCNTs. Due to the superior electromechanical behaviors and mechanical reinforcement of PEDOT, the PEDOT/MWCNT@PU mat-based device exhibits a wide working range (0–70 kPa), high sensitivity (1.6 kPa −1 ), and good mechanical robustness (over 18,000 cycles). The PEDOT/MWCNT@PU mat-based sensor also demonstrates a good linear response to different temperature variations because of the thermoelectricity of the PEDOT/MWCNT composite. This novel strategy for the fabrication of multifunctional fibrous mats provides a promising opportunity for future applications for high-performance wearable devices.
研究领域:
材料科学
·
柔性电子
·
传感器技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Yuanyuan Fan,Shun Li,Daobin Zhu,Keyu Guo,Rangrang Fan,Chunfeng Dong,Yongtao Liu,Yong Li,Junshan Hu
The thermal quenching effect of photoluminescent materials greatly limits their practical applications in bioimaging, sensing, radiation detection, and photovoltaic devices. In this paper, the upconversion luminescence (UCL) of Sc 2 W 3 O 12 :Er 3+ /Yb 3+ was significantly improved by doping Ba 2+ ions. The study identifies that the optimal doping concentration of Ba 2+ ions within the negative thermal expansion (NTE) phosphors Sc 2 W 3 O 12 : Er 3+ /Yb 3+ is 0.03 mol, the green and red light intensities of Sc 2 W 3 O 12 : Er 3+ /Yb 3+ /Ba 2+ phosphor were increased by 32.76 times and 23.06 times. When the temperature rises from 298 K to 523 K, the NTE effect causes an abnormally increased luminous intensity. Utilizing fluorescence intensity ratio (FIR) technology, the temperature sensing characteristics of the Sc 2 W 3 O 12 : 0.30 Yb 3+ , 0.02 Er 3+ , 0.03 Ba 2+ phosphor were further examined, achieving maximum relative and absolute sensitivities of 1.24 % K −1 and 1.97 % K −1 , respectively.
研究领域:
材料科学
·
无机化学
·
光子学
·
温度传感
·
功能材料
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）