CHEMICAL ENGINEERING JOURNAL
·
2017
·
IF 6.216
Zhanjian Liu,Huaiyuan Wang,Xiguang Zhang,Chijia Wang,Chongjiang Lv,Yanji Zhu
In this work, a novel bistratal gas layer structure has been used to enhance the long-term durability of a superhydrophobic surface. The design of this bistratal structure takes inspiration from the wings of the insect Notonecta glauca and a spider web. It is comprised of an underlying semi-interpenetrating array structure and a superficial microfiber network structure. On modification with 1 H ,1 H ,2 H ,2 H -perfluorooctyltriethoxysilane (POTS), the prepared surface demonstrates an excellent superhydrophobicity with a water contact angle (WCA) of 168 ± 1.4° and a sliding angle (SA) of 4 ± 0.5°. The underlying semi-interpenetrating array structure can capture more gas to form a stable underlying gas layer, which enhances its anti-static pressure capability. When the superhydrophobic surface was impacted by a high-pressure water column (250 kPa), the superficial micro fibers network structure acted as a buffer layer to disperse the impact force that spread over the network. The prepared surface with bistratal gas layer structure was thus able to high speed water jetting (22.4 m s −1 ), which is three times the speed of the heavy rain (7–9 m s −1 ) and four times that reported for polysiloxane/multiwalled carbon nanotubes (POS/MWCNTs) surfaces (5.4 m s −1 ). Furthermore, the superhydrophobic surface designed by this method was also shown to possess self-healing and hot-water-repellent (100 °C) capability. These features demonstrate the practical potential of superhydrophobic surfaces with a bistratal gas layer structure.
研究领域:
材料科学
·
表面工程
·
纳米技术
·
仿生学
·
物理化学
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2020
·
IF 4.551
Junjie Zhou,Hao Liu,Yichao Lin,Chen Zhou,Aisheng Huang
A well-shaped Ce (IV)-based metal organic framework (Ce-BDC) is prepared under solvothermal method. The influence of synthesis time, temperature and the amount of acetic acid (HAc) as a modulator is studied to develop a new strategy for the synthesis of well-shaped Ce-based MOF. The relationship between the synthesis parameters and morphology as well as crystallinity of Ce-BDC is investigated by XRD and SEM. Furthermore, the obtained well-shaped Ce-BDC shows a CO 2 uptake capacity of 2.28 mmol g −1 at 0 °C and 1.0 bar. Meanwhile, the breakthrough curve behaviors of Ce-BDC are investigated for a CO 2 /CH 4 and CO 2 /N 2 mixture gas . It is found that the Ce-based MOF adsorbs CO 2 under ambient temperature and pressure, but completely excludes CH 4 and N 2 , suggesting that it is a promising adsorbent for efficient separation of CO 2 from natural gas.
研究领域:
材料科学
·
无机化学
·
多孔材料
·
气体分离
·
环境催化
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2015
·
IF 2.999
Chuanying Wang,Xianhua Cheng
β-NaYF 4 :Yb 3+ /Er 3+ microcrystals codoped with Cr 3+ ions were prepared for the first time via a facile hydrothermal method . The influence of doping concentration of Cr 3+ ions on growth and upconversion (UC) luminescence properties of β-NaYF 4 :Yb 3+ /Er 3+ microcrystals were investigated in detail. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectra and photoluminescence (PL) spectra were used for characterization. The results demonstrated that the morphology and size of β-NaYF 4 :Yb 3+ /Er 3+ microcrystals were influenced by doping concentration of Cr 3+ ions, the possible mechanism was proposed. The UC intensity of β-NaYF 4 :Yb 3+ /Er 3+ microcrystals was significantly enhanced by doping of Cr 3+ ions. In contrast to β-NaYF 4 :Yb 3+ /Er 3+ microcrystals without doping of Cr 3+ ions, the green and red emission intensities of the microcrystals codoped with 15 mol% Cr 3+ ions were enhanced by 16 and 7 times, respectively. The enhancement of the UC intensities should be ascribed to the distortion of local symmetry around Er 3+ ions, the UC mechanism was discussed. This work will be helpful for improving the UC intensity of other lanthanide-doped UC nano- and micro-crystals.
研究领域:
材料科学
·
无机化学
·
光功能材料
·
纳米医学
·
生物成像
·
分子影像学
·
光学材料
✓ 已验证
DOI
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2011
·Vol. 13
·期 20
·9232-9237
·
IF 3.454
Jingjie Cui,Dehui Sun,Weijia Zhou,Hong Liu,Peiguang Hu,Na Ren,Haiming Qin,Zhen Huang,Jianjian Lin,Houyi Ma
Two kinds of TiO2 nanobelts were prepared from commercial P-25 powders via an alkaline hydrothermal method with and without an acid etching process. The uncauterized nanobelts (TNs) exhibited a smooth surface, and mixed phases of anatase and TiO2 (B), whereas the cauterized ones (CTNs) displayed a rough surface and a pure anatase structure. TNs and CTNs were then deposited onto a glassy carbon electrode (GCE) surface with a conductive adhesive (CA), and the resulting chemically modified electrodes exhibited electrocatalytic activities in the oxidation of nucleobases in a 0.1 M phosphate buffer solution (PBS) at pH 7.4. For guanine and adenine, well-defined oxidation peaks were observed in voltammetric measurements at about +0.62 and +0.89 V, respectively, at a potential sweep rate of 100 mV s−1, whereas for cytosine, uracil and thymine, the voltammetric features were not obvious. The average surface coverages (Γ) of guanine and adenine on the CTNs/CA/GCE electrode were estimated to be 4.75 × 10−10 and 7.44 × 10−10 mol cm−2, respectively, which were about twice those at the TNs/CA/GCE electrode. The enhanced activity of the CTN-based electrode towards purine nucleobase oxidation was ascribed to the large specific surface area and anatase structures with enhanced (001) facets of the CTN that facilitated adsorption of the analytes onto the electrode surface and charge transport through the electrode surface layer.
研究领域:
分析化学
·
纳米材料科学
·
电化学
·
生物传感
·
分子生物学
·
生物医学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2017
·Vol. 28
·期 17
·12747-12754
·
IF 2.019
Huang Feng,Yan Aihua,Sui Yanwei,Wei Fuxiang,Qi Jiqiu,Meng Qingkun,He Yezeng
Ni 3 S 4 @MoS 2 nanosheets grown on the carbon fiber paper (Ni 3 S 4 @MoS 2 /CFP) were successfully prepared via a facile one-step hydrothermal technique. Serving as a supercapacitor electrode, the obtaining Ni 3 S 4 @MoS 2 /CFP exhibits a remarkable specific capacitance of 1296 F/g, high rate capability of 57.8%, and excellent cycling stability of 96.2% retention after 5000 cycles. The superior electrochemical properties of Ni 3 S 4 @MoS 2 /CFP nanocomposite is attributed to the synergistic effects of the layeredNi 3 S 4 , MoS 2 and the conductive CFP.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
复合材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2020
·Vol. 31
·期 4
·2887-2894
·
IF 2.22
Liu Yuan,Gu Yi-Jing,Deng Jia-Li,Luo Gui-Yang,Wu Fu-Zhong,Mai Yi,Dai Xin-Yi,Li Jun-Qi
A series of LiFe 1− x Mn x PO 4 /C composites were successfully synthesized through a simple hydrothermal method. The effects of doped Mn on their micro-structures and electrochemical performances were investigated. The XRD results indicate that Mn doping cannot change the olivine lattice type of LiFePO 4 . Appropriate Mn doping can reduce the particle size of LiFePO 4 . The electrochemical performance data show that the electrochemical performances of the composite materials are enhanced at first and then decrease as the doping amount of Mn increases. Both the CV and EIS results illustrate that a small amount of doped Mn will reduce the electrode polarization and electrochemical impedance of the samples and simultaneously improve the electrochemical performance. Among all the samples, the LiFe 0.98 Mn 0.02 PO 4 /C sample has a desirable electrochemical performance, with its specific discharge capacity reaching 156.0 mAh g −1 at a rate of 0.1 C. Even at a high rate of 5 C, it can still reach 110.0 mAh g −1 . All the results indicate that an appropriate amount of doped Mn has an emphatic effect on the electrochemical performance of LiFePO 4 /C.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机化学
·
纳米材料
·
固态化学
✓ 已验证
DOI
高影响因子
CHINESE CHEMICAL LETTERS
·
2016
·Vol. 28
·期 1
·49-54
·
IF 1.947
Qi-Feng Li,Chao Wang,Xiao-Zheng Lan
Latent heat storage performance of a layered perovskite-type compound, 1-C 14 H 29 NH 3 ) 2 ZnCl 4 (C 14 Zn), embedded in a series of silica gel (SG) with pore sizes of d = 15–200 nm is investigated using differential scanning calorimetry (DSC), and powder X-ray diffractions (XRD). C 14 Zn in the nanopores of silica gel shows size-dependent phase transition temperature, enthalpy change and supercooling. They have a stable transition temperature and heat capacity at each size in a short-term thermal cycling. Similar X-ray diffraction patterns are observed for the nano-sized and the bulk C 14 Zn. The encapsulation of a phase change material in nanopores is a new way of tuning its thermal energy storage properties for a wider range of temperature regulation.
研究领域:
材料科学
·
热力学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
ADVANCED POWDER TECHNOLOGY
·
2019
·Vol. 30
·期 9
·1920-1931
·
IF 3.25
Ting Wang,Bing–rui Li,Li–guang Wu,Yu–bing Yin,Bo–qiong Jiang,Ju–qing Lou
La 3+ - or Yb 3+ -doped TiO 2 supported on the surface of reduced graphene oxide were fabricated by adsorbed-layer nanoreactor synthesis (ANS) coupling with a solvothermal treatment to extend photocatalysis application in the advanced treatment of simulated wastewater with high salt concentration. Results showed that La 3+ or Yb 3+ could distribute in the TiO 2 lattice, only in ANS preparation with graphene oxide as the carrier, to replace Ti 4+ during the solvothermal treatment, thus introducing TiO 2 mixed-crystal and heterojunction structures in the catalysts. La 3+ or Yb 3+ caused lattice distortion structures and anionic vacancies in the TiO 2 lattice. The anionic vacancies (oxygen vacancies) might generate Ti 3+ in catalysts, thus enhancing visible-light response, due to impurity levels introduced by La 3+ or Yb 3+ . As the strong adsorption capability of the catalyst for phenol was not interfered by salt ions in the simulated wastewater, the catalysts could efficiently degrade phenol. The highest removal rate of phenol was approximately 90%.
研究领域:
环境科学
·
材料化学
·
光催化
·
水处理
·
纳米材料
·
表面化学
·
环境功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2018
·
IF 3.779
Pan Liu,Jiguang Liu,Jiahui Liu,Xia Dong,Rui Wang
Using nitrogen, the morphological evolution of iron oxide/alkoxide particles was investigated by altering the reaction temperature in a one-pot solvothermal synthesis , resulting in a series of particles with different shapes, such as smooth sheet-like, rough sheet-like and cubic particles. The particle shape began to transform at 180 °C due to the altered crystallization and compositions, accompanied by the evolution of the magnetic properties without post-calcination. Based on the above research, large flower-like particles could be prepared by a two-step heating process. In virtue of the structural and morphological advantages, the flower-like particles were applied in fabricating a superwetting surface.
研究领域:
材料化学
·
纳米科技
·
表面科学
·
功能材料
·
物理化学
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2024
·
IF 4.8
Guojun Lv,Xuyang Zou,Yan Chen,Qing Zhang,Xubin Zhang,Fumin Wang
The successful one-pot synthesis of MCM-41/MFI composite is mainly concentrated on the trivalent heteroatom of Al 3+ and Fe 3+ , however there are almost no reports about the one-pot synthesis of Ti-MCM-41/MFI composite. In this work, we reported the one-pot synthesis of Ti-MCM-41/MFI composite with a temperature-gradient hydrothermal strategy using hexadecyl trimethylammonium bromide CTAB and silicalite-1 seed as structure directing agents as well as ammonia solution as alkali source, and its application as heterogeneous catalyst in the cyclohexene epoxidation reactions. The impact of Si/Ti molar ratio and ammonia dosage as well as CTAB amount on the formation and property of Ti-MCM-41/MFI composite were systematically investigated. In addition, a possible partial transformation mechanism of Ti-MCM-41/MFI composite sample was proposed. The synthesized Ti-HMZ-50-N3.77-Se0.05 sample with ordered mesoporous structure and high content of framework titanium active centers revealed the eminent cyclohexene epoxidation performance, achieving a 32.51 % of cyclohexene conversion and a 61.27 % selectivity of cyclohexene oxide within 5 h of reaction.
研究领域:
催化化学
·
材料化学
·
纳米材料
·
多相催化
·
绿色化学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2017
·Vol. 44
·期 6
·5842-5847
·
IF 2.986
Lirong Yang,Chunmei Wang,Zhigang Liu,Xiaoyu Liu,Yang Song,Xiaoxin Feng,Baoqiang Zhang
Anatase TiO 2 coatings prepared by solvothermal process in a neutral ethanol solution of isopropyl titanate at 160 °C have been grown on slag wool fibers (SWF) which were modified by hexadecyltrimethylammonium bromide (CTAB) in advance. X-ray diffraction patterns confirmed the coatings are of a nanocrystalline anatase structure, and scanning electron microscopy observations and energy-dispersive X-ray spectrum revealed a continuous coverage of TiO 2 formed on the fiber surfaces. The photocatalytic activity of the samples was tested by the photocatalytic degradation of methylene blue (MB) solution. The results show that CTAB modified slag wool fibers (CMSWF) are not a suitable adsorbent for MB due to their weaker negative surface charges. Anatase TiO 2 coated CMSWF display higher photocatalyst activity than anatase TiO 2 coated SWF without CTAB modification, and Anatase TiO 2 coated CMSWF are relatively stable under UV-light irradiation.
研究领域:
材料科学
·
环境功能材料
·
表面改性
·
光催化
·
纳米涂层
✓ 已验证
DOI
高影响因子
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
·
2011
·Vol. 110
·期 3
·1437-1442
·
IF 1.752
Lan X. Z.,Pei H. R.,Yan X.,Liu W. B.
Phase behavior of dodecane–tetradecane ( n -C 12 H 26 –C 14 H 30 , n -C 12 –C 14 ) binary system in bulk and confined in SBA-15 (pore diameters 8 nm; 15.9 nm) has been investigated by differential scanning calorimetry and transmission electron microscopy. The bulk system possesses some special phases relating to the rotator phase in normal alkanes. Dodecane–tetradecane mixtures confined in SBA-15 (8 nm) are a system miscible both in solid and liquid states with a phase diagram of a smooth curve. Dodecane–tetradecane system confined in SBA-15 (15.9 nm) exhibits not only solid–liquid (s–l) in all compositions but solid–solid transition in mole fractions of tetradecane 0.1–0.6, which forms a phase diagram of “loop line” shape. Melting temperatures of n -C 12 –C 14 /SBA-15 (8 nm) are lower than those of n -C 12 –C 14 /SBA-15 (15.9 nm) in all mole fractions. The evolution of the phase diagram of n -C 12 –C 14 confined in 8 nm, 15.9 nm pore sizes of SBA-15 and in bulk, respectively, shows a dramatic effect of confinement on phase behavior of normal alkane mixtures. The s–l phase boundary lines of n -C 12 –C 14 /SBA-15 (8, 15.9 nm) are fitted as \( T_{\text{m,r}}^{x} \) being [ \( xT_{{\text{m} ,r}}^{A} + \left( {1 - x} \right)T_{\text{m,r}}^{B} - D \) ], where D is a polynomial ∑ a
i
x
i , i = 1, 2,···, n ( A = C 14 , B = C 12 ).
研究领域:
物理化学
·
材料科学
·
纳米限域效应
·
热分析
·
软物质物理
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）