CARBON
·
2023
·
IF 10.9
Lu Han,Dehui Wang,Mengdie Li,Yang Zhong,Kanghong Liao,Yingbo Shi,Wenjing Jie
As the development of neuromorphic computing , it is meaningful to explore the synaptic memristors based on organic materials owing to their advantages in low cost, good mechanical flexibility and strong biocompatibility. In this work, organic pentacene thin films have been deposited on different substrates by the thermal evaporation method. The prepared thin films on SiO 2 /Si substrates demonstrate the co-existence of digital and analog resistive switching (RS) behaviors as well as a series of synaptic plasticity. To characterize the flexibility of the organic thin films, lateral memristors have been fabricated on polyethylene terephthalate (PET) substrates and demonstrate comparable RS behaviors when the bending radius is decreased to 1.26 cm or after 1000 bending. Furthermore, vertical memristors with Pt/pentacene/indium tin oxide (ITO) structure have been constructed when the organic thin films are deposited on ITO/PET substrates, exhibiting bipolar RS behaviors with low SET voltage of 0.65 V. The vertical synaptic memristors can be used to simulate the “learning-forgetting” experience of human brain. More importantly, an artificial neural network (ANN) can be simulated based on the vertical synaptic memristors, demonstrating 93.8 % recognition accuracy for hand-written digit image. This study suggests potential applications of the organic pentacene thin films for neuromorphic computing.
研究领域:
材料科学
·
微电子学
·
生物电子学
·
纳米科技
·
神经工程
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Peng Hou,Ke Chen,Xudong Wang,Xiaofei Hu,Bing Li,Ming Liu,Xiao (Matthew) Hu,Yujie Song
The rapid development of high-performance materials has garnered considerable attention in addressing electromagnetic pollution . The construction of core-shell heterostructures is an effective approach for regulating the electromagnetic parameters of absorbers. However, these heterostructures usually lack a direct channel for charge transport between the core phase and the adhesive shell phase. Herein, Fe 2 AlB 2 @FeAl-layered double hydroxides with core-shell heterostructures were prepared using a top-down approach. The tightly connected FeAl-LDHs nanosheets to the Fe 2 AlB 2 parent phase improved electronic transport. Compared with raw Fe 2 AlB 2 , the spherical absorber with an embroidered structure demonstrated stronger reflection loss (-15.6 dB for Fe 2 AlB 2 , −58.6 dB for Fe 2 AlB 2 @FeAl-LDHs) and a broader effective absorption bandwidth (2.2 GHz for Fe 2 AlB 2 , 3.6 GHz for Fe 2 AlB 2 @FeAl-LDHs) due to the enhanced dielectric and magnetic losses. This study presents a practical method for designing new controllable core-shell heterostructures for electromagnetic wave-absorbing materials.
研究领域:
材料科学
·
电磁学
·
纳米材料
·
功能材料
·
复合材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
·
2012
·Vol. 50
·期 24
·4995-4999
·
IF 3.919
Zhihai Hao,Hou Chen,Delong Liu,Lijun Fan
Sn(0)-mediated single electron transfer-living radical polymerization (SET-LRP) of acrylonitrile (AN) with carbon tetrachloride (CCl 4 ) as initiator and hexamethylenetetramine (HMTA) as ligand in N, N -dimethylformamide (DMF) was studied. The polymerization obeyed first order kinetic. The molecular weight of polyacrylonitrile (PAN) increased linearly with monomer conversion and PAN exhibited narrow molecular weight distributions. Increasing the content of Sn(0) resulted in an increase in the molecular weight and the molecular weight distribution. Effects of ligand and initiator were also investigated. The block copolymer PAN- b -polymethyl methacrylate with molecular weight at 126,130 and polydispersity at 1.36 was successfully obtained. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012
研究领域:
高分子化学
·
聚合反应
·
功能高分子
·
材料化学
·
有机合成
✓ 已验证
DOI
高影响因子
Solar RRL
·
2023
·Vol. 8
·期 4
·2300926
·
IF 7.9
Qiuju Liu,Yang Liu,Hu Liu,Qingyong Tian,Bin Fan,Hua Bai
Room-temperature-processed (RTP) electron-transport layer (ETL) is a prerequisite for fabricating fully RTP perovskite solar cells (PSCs). Herein, an RTP-Zn 2 SnO 4 (ZSO) ETL is deposited for achieving RTP-PSCs by magnetron sputtering using ZnO and SnO 2 targets. The ZSO ETL exhibits great electrical properties, better band alignment, and yields increased grain size of the perovskite grown on it, thus facilitating electron extraction from the perovskite layer to the ETL. As a result, a champion power conversion efficiency of 21.06% is achieved in the ZSO-based device, which is the highest value for RTP-PSCs. The ZSO-based PSCs also exhibit high device stability. Moreover, the efficiency of a large-area perovskite module based on ZSO ETL reaches 17.79%.
研究领域:
材料科学
·
光伏技术
·
纳米材料
·
半导体物理
·
能源材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 59
·34658-34670
·
IF 3.049
Xiangyu Wang,Yu Xie,Jun Ma,Ping Ning
The two-stage removal process of tetracycline (TC) in aqueous solutions using a novel photocatalyst based on nano-zero-valent iron (NZVI), g-C3N4 and expanded graphite by carbon layer (EGC) is reported for the first time. The composite (NZVI/g-C3N4@EGC) exhibits remarkable adsorption, reduction ability and visible light activity over the reaction course. Compared with pristine g-C3N4 (25.9%) and pure NZVI (45.9%), NZVI/g-C3N4@EGC achieves high degradation efficiency of TC (98.5%) due to the formation of a heterogeneous photo-Fenton system. This study shows that synergistic effects are achieved in the reaction system, including maintaining the reduction ability of NZVI and enhancing the photocatalytic activity of g-C3N4 by facilitating the separation of photogenerated electrons (e−) and holes (h+). TC removal involved a two-stage process of adsorption–reduction and photo-degradation. The quencher experiments determined that holes (h+) and superoxide radicals (˙O2−) are the major reactive species in the degradation of TC. The degradation pathways of TC were proposed based on the analysis of the intermediates. In addition, NZVI/g-C3N4@EGC revealed a high stability in a five-cycle test and good magnetic properties for facile separation from aqueous solutions. From an application viewpoint, NZVI/g-C3N4@EGC has favorable prospects in the direction of the photocatalytic degradation of antibiotic wastewater.
研究领域:
环境化学
·
材料科学
·
光催化
·
水污染治理
·
纳米复合材料
·
抗生素降解
✓ 已验证
DOI
高影响因子
Frontiers of Optoelectronics
·
2019
·Vol. 11
·期 4
·348-359
·
IF 0
Liu Jikang,Li Junli,Tu Guoli
The electron transport layer (ETL) plays a crucial role on the electron injection and extraction, resulting in balanced charge transporting and reducing the interfacial energy barrier. The interface compatibility and electrical contact via employing appropriate buffer layer at the surface of hydrophobic organic active layer and hydrophilic inorganic electrode are also essential for charge collections. Herein, an ether chain functionalized fullerene derivatives [6,6]-phenyl-C 61 -butyricacid-(3,5-bis(2-(2-ethoxyethoxy)-ethoxy)-phenyl)-methyl ester (C 60 -2EPM) was developed to modify zinc oxide (ZnO) in inverted structure organic solar cells (OSCs). The composited ZnO/C 60 -2EPM interface layer can help to overcome the low interface compatibility between ZnO and organic active layer. By introducing the C 60 -2EPM layer, the composited fullerene derivatives tune energy alignment and accelerated the electronic transfer, leading to increased photocurrent and power conversion efficiency (PCE) in the inverted OSCs. The PCE based on PTB7-Th: PC 71 BM was enhance from 8.11% on bare ZnO to 8.38% and 8.65% with increasing concentrations of 2.0 and 4.0 mg/mL, respectively. The fullerene derivatives C 60 -2EPM was also used as a third compound in P3HT:PC 61 BM blend to form ternary system, the devices with addition of C 60 -2EPM exhibited better values than the control device.
研究领域:
材料科学
·
光电化学
✓ 已验证
产品关联
DOI
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Yanhua Zhang,Yuhang Mei,Xinglong Gao,Yumei Xiao,Zijun Tang,Xing Xiang,Jiadong Deng
The lithium dendrite problem of Li 7 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) solid electrolyte restricts the practical application and development of all-solid-state lithium batteries (ASSLBs). Herein, a LiPON interlayer with Li + conductive and electron non-conductive dynamic properties is constructed at the Li/LLZTO interface. Results show that the electronic conductivity of solid electrolyte after LiPON modification decreased by nearly three orders of magnitude, indicating that it has good ability to hinder electron conduction . The interlayer enhances the wettability between the Li metal anode and LLZTO, resulting in a decrease of battery resistance from 3400 Ω to 700 Ω. The critical current density of the ASSLBs increase from 0.1 mA cm −2 to 1.2 mA cm −2 at room temperature, and the battery cycle number increase from 31 h to over 1000 h. XPS deep etching results show that the LiPON/LLZTO interface has good electrochemical stability. The Kelvin probe force microscope displays a sharp increase in potential within the LiPON interlayer, indicating its successful hindrance of electron conduction to the solid electrolyte. The effective inhibition of lithium dendrites growth is due to LiPON can promote the Li + transmission from LLZTO solid electrolyte to Li anode, and also hinder the electron conduction to LLZTO to form lithium dendrites.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态电池
·
界面工程
✓ 已验证
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 73
·46461-46471
·
IF 3.108
Shui Jiang,Jun Wang,Yubing Sun
Chinese pecans (Carya cathayensis) continuously deteriorate during storage because of their high fatty acid contents. In this study, an electronic nose (E-nose) was introduced to characterize Chinese pecans with different storage times. Chemometric methods (principal component analysis (PCA), partial least squares regression (PLSR), and back propagation neural networks (BPNNs)) were employed to analyze E-nose data. For qualitative analysis, PCA could visualize the discrimination between different pecans based on the E-nose data. For quantitative analysis, the results indicated that BPNN models performed better both in predicting storage times and fatty acid contents than the PLSR models. In addition, a multi-target BPNN regression model was built to simultaneously predict the contents of the six main fatty acids, and the results (R2 > 0.95 in calibration sets and R2 > 0.88 in validation sets) were satisfactory. This study provides a potentially viable method for determining the storage times and fatty acid profiles of nut products.
研究领域:
食品科学
·
分析化学
·
农产品贮藏
·
营养化学
·
食品安全
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2022
·
IF 7.336
Heli Yu,Mingzhu Bi,Cuijuan Zhang,Tianjie Zhang,Xiaoning Zhang,Hongtao Liu,Jianli Mi,Xiangqian Shen,Shanshan Yao
Construction of high sulfur loading electrode is one of the effective ways to achieve high specific energy density lithium/sulfur batteries. Therefore, the optimization of polymeric binders has been considered as effective strategy to improve the volume changes of sulfur electrodes during charge/discharge processes. In this work, an effective route for the preparation of three dimensional polymeric binder (PAA-PANI) via multiple hydrogen bonds was developed and fabricated through in situ polymerization between polyacrylic acid (PAA) and polyaniline (PANI), which possess bifunctional effects on high sulfur loading cathodes in lithium/sulfur batteries. The carboxyl polar groups of PAA could effectively adsorb polysulfides and the conductive PANI enhance the electronic conductivity of the sulfur electrode. The three dimensional polymeric binder of PAA-PANI has enhanced the active material adhesion, mechanical properties and electronic conductivity, which decreased overpotential polarization, improved the lithium ions diffusion coefficient, and reduced the self-discharge. More importantly, the PAA-PANI functional binder could alleviate the expansion of high sulfur loading electrode. Taking advantages of PAA-PANI binder, the carbon nanotubes modified sulfur electrode (CNTs@S; sulfur content: 84.3 wt%) with PAA-PANI binder exhibits an initial discharge capacity of 906 mAh g –1 at 2.56 mA cm –2 (0.3 C) under a sulfur loading of 5.1 mg cm –2 . Even at higher current density of 8.54 mA cm –2 (1 C), the PAA-PANI binder electrode delivers a high capacity of 846 mAh g –1 . Moreover, with an extremely high areal sulfur loading of 17 mg cm –2 , the cathode shows an areal specific capacity of 16.7 mAh cm –2 .
研究领域:
电化学
·
能源材料
·
高能电池
·
功能高分子
·
界面化学
·
储能技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2016
·
IF 6.333
Qianlong Zhou,Chunyang Jia,Xingke Ye,Zhonghua Tang,Zhongquan Wan
At present, the topic of building high-performance, miniaturized and mechanically flexible energy storage modules which can be directly integrated into textile based wearable electronics is a hotspot in the wearable technology field. In this paper, we reported a highly flexible fiber-shaped electrode fabricated through a one-step convenient hydrothermal process. The prepared graphene hydrogels/multi-walled carbon nanotubes-cotton thread derived from natural cotton thread is electrochemically active and mechanically strong. Fiber-shaped supercapacitor based on the prepared fiber electrodes and polyvinyl alcohol-H 3 PO 4 gel electrolyte exhibits good capacitive performance (97.73 μF cm −1 at scan rate of 2 mV s −1 ), long cycle life (95.51% capacitance retention after 8000 charge-discharge cycles) and considerable stability (90.75% capacitance retention after 500 continuous bending cycles). Due to its good mechanical and electrochemical properties , the graphene hydrogels/multi-walled carbon nanotubes-cotton thread based all-solid fiber-shaped supercapacitor can be directly knitted into fabrics and maintain its original capacitive performance. Such a low-cost textile thread based versatile energy storage device may hold great potential for future wearable electronics applications.
研究领域:
材料科学
·
纳米技术
·
柔性电子学
·
能源存储
·
纺织工程
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR CATALYSIS B-ENZYMATIC
·
2014
·
IF 2.745
Teng Zhang,Xiao-Ling Xu,Yi-Ning Jin,Jian Wu,Zhi-Kang Xu
Carbon nanotubes are widely applied in electronics, which offers great potential for enhancing the activity of redox enzyme. In this work, polyimide (PI) was blended with multiwalled carbon nanotubes (MWCNTs) and then electrospun into nanofibers for the immobilization of horseradish peroxidase (HRP), a redox enzyme. SEM and TEM were used to characterize the surface morphology of the PI/MWCNTs nanofibers and to analyze the protruding parts induced by the blending of MWCNT. The results indicate that, compared to the virgin PI nanofibers, the blending of MWCNTs increases the retention activity of immobilized HRP from 2.38% to 12.50%. Circular dichroism and UV–vis molecular absorption spectrometry were used to explore the interactions between HRP and MWCNTs . It seems that MWCNTs increase the enzyme activity by the facilitation of electron transfer among the catalytic intermediates “HRP I”, “HRP II” and MWCNTs.
研究领域:
生物化学
·
纳米生物技术
·
酶工程
·
生物材料
·
分析化学
✓ 已验证
DOI
高影响因子
Small
·
2021
·Vol. 18
·期 5
·2104460
·
IF 13.281
Yanan Huang,Jianguo Si,Shuai Lin,Hongyan Lv,Wenhai Song,Ranran Zhang,Xuan Luo,Wenjian Lu,Xuebin Zhu,Yuping Sun
3D anisotropic functional properties (such as magnetic, electrical, thermal, and optical properties, etc.) in a single material are not only beneficial to the multipurpose of a material, but also helpful to enrich the regulatory dimensionality of functional materials. Herein, a colossal 3D electrical anisotropy of layered MAB-phase MoAlB single crystal is introduced and dissected. Using high-temperature metal-solution method, high-quality MoAlB single crystals are obtained and a surprisingly strong out-of-plane ( σ a / σ b = 1.43 × 10 5 , at 2 K) and in-plane ( σ a / σ c = 12.12, at 2 K) electrical anisotropies are first observed. After a series of experimental and theoretical investigations, it is demonstrated that the 3D anisotropic crystal structure and chemical bond of MoAlB result in its 3D anisotropic phonon vibration and electronic structure, influence the corresponding electron-electron as well as electron-phonon interactions, and finally give rise to its colossal 3D anisotropy of electrical conductivity. This work experimentally and theoretically proves MoAlB single crystal possessing the 3D anisotropies of crystal structure, chemical bond, phonon vibration, electronic structure, and electrical transport, but also provides a promising platform for the future design of functionalized electronic devices as well as synthesis of new and large-sized in-plane anisotropic 2D material (MoBene).
研究领域:
凝聚态物理
·
材料科学
·
功能材料
·
晶体化学
·
纳米电子学
·
低维材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）