Small
·
2023
·Vol. 20
·期 9
·2306758
·
IF 13.3
Chen Li,Ke Liu,Dequan Jiang,Huacai Yan,En Chen,Yingying Ma,Haoming Cheng,Ting Wen,Binbin Yue,Yonggang Wang
Polymorphic phase transition is an essential phenomenon in condensed matter that the physical properties of materials may undergo significant changes due to the structural transformation. Phase transition has thus become an important means and dimension for regulating material properties. Herein, this study demonstrates the pressure-induced multi-transition of both structure and physical properties in violet phosphorus, a novel phosphorus allotrope. Under compression, violet phosphorus undergoes sequential polymorphic phase transitions. Concomitant with the first phase transition, violet phosphorus exhibits emergent insulator–metal transition, superconductivity, and dramatic switching from positive to negative photoconductivity. Remarkably, the resistance of violet phosphorus shows a sudden drop of around 10 7 along with the phase transition. In addition, piezochromism from translucent red to opaque black and suppression of photoluminescence are observed upon compression. Of particular interest is that the sample irreversibly transforms into black phosphorus with a pronounced discrepancy in physical properties from the pristine violet phosphorus after decompression. The abundant polymorphic transitions and property changes in violet phosphorus have significant implications for designing novel pressure-responsive electronic/optoelectronic devices and exploring concealed polymorphic transition materials.
研究领域:
凝聚态物理
·
材料科学
·
高压物理
·
半导体物理
·
光学材料
·
相变动力学
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2020
·
IF 3.107
Yayu Guo,Huilan Guan,Wenxiu Peng,Xuelei Li,Yue Ma,Dawei Song,Hongzhou Zhang,Chunliang Li,Lianqi Zhang
Li 7 P 3 S 11 (70Li 2 S·30P 2 S 5 ) sulfide is a promising electrolyte candidate for all-solid-state lithium batteries (ASSLBs) owing to its high ionic conducivity and wide electrochemical stability window. However, the sensitivity to moisture and the poor interfacial compatibility with electrodes limit the conventional application of Li 7 P 3 S 11 . Herein, we present a substitution strategy to produce a O-incorporated 70Li 2 S·(30-x)P 2 S 5 ·xP 2 O 5 (mol%) sulfide electrolyte to address above issues. The elaborately designed electrolyte is prepared via wet vibration ball milling technique with P 2 O 5 substitution content of 1, 3 and 5. As a result, the 70Li 2 S·27P 2 S 5 ·3P 2 O 5 electrolyte displays the highest ionic conductivity of 2.61× 10 −3 S cm −1 which outperforms than that of pristine Li 7 P 3 S 11 (ionic conductivity of 1.35 × 10 −3 S cm −1 ) and the assembled LiCoO 2 @LiNbO 3 /70Li 2 S·27P 2 S 5 ·3P 2 O 5 /Li-In ASSLB exhibits the superior capacity retention of 93.2% after 100 cycles at 0.5C. The reason for the developed electrochemical performance lies in the substitution of the non-bridging sulfur atom with bridging oxygen atom, from which the interaction between electrolyte and lithium ions is weakened, thereby the rapid transfer of lithium ions is facilitated. Furthermore, Raman and XRD results indicate that the adverse interfacial reactions are suppressed through P 2 O 5 substitution. This work suggests that P 2 O 5 substitution is an effective strategy for sulfide electrolyte toward high energy all-solid-state lithium batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
电池技术
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 91
·74251-74255
·
IF 3.84
Juan-Ye Wang,Hong-Dan Peng,Jia-Mei Yang,Jing-Hui Yan,Ge-Bo Pan
We develop a facile approach for the one-step growth of ultralong and high-quality NiOEP nanowires in a large area, through a solvent-induced self-assembly method without using any structure directing agents. The size of the nanowires can be controlled by changing the composites of solvent mixtures. Being assembled in visible-light sensors, these nanowires exhibit a fast, reversible, and stable response. The highest Ion/Ioff ratio and photoresponsivity of photodiodes could reach 681 and 10.1 mA W−1, respectively, which could be attributed to the perfect single crystal quality, large surface to volume ratio, and fewer recombination barriers within the nanostructures. The facile fabrication and good photoresponse make NiOEP nanowires promising in optoelectronic applications.
研究领域:
材料科学
·
纳米科技
·
光电子学
·
物理化学
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2024
·Vol. 141
·期 44
·e56156
·
IF 2.7
Hao Sun,Qinghua Yang,Detao Kong,Yanrui Li,Yaolong He,NengHui Zhang,Hongjiu Hu
Polyethylene oxide (PEO)-based solid polymer electrolytes are regarded as promising electrolyte materials because of their safety and flexibility. However, low ionic conductivity at ambient temperature and poor mechanical properties have been a hindrance to its development. In this work, we thermally compressed the PEO-based electrolytes and explored the ionic conductivity, mechanical performance, free volume, and thermal properties of the electrolyte under different thermal pre-compressing strains (TPC-strains). The results show that TPC-strain can significantly improve the ionic conductivity, in-plane strength, stiffness, and cell specific capacity as well as the mechanical integrity of solid polymer electrolytes within the battery environment. However, it also results in a reduction in the modulus and stiffness of the SPEs in the through-plane. In particular, applying a TPC-strain of 10%–20% to the SPEs by thermal compressing may be a suitable option, which can increase the ionic conductivity of the through-plane to a factor of 3.4 compared with the uncompressed electrolyte, and increase the in-plane strength by up to 141%, resulting in better mechanical integrity during charging/discharging processes. At the same time, the compression modulus can be maintained at 80% or higher.
研究领域:
材料科学
·
电化学
·
高分子物理
·
能源存储
·
固态离子学
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2017
·Vol. 52
·期 19
·11569-11579
·
IF 2.599
Lan Jin-Le,Ma Wenqiang,Deng Chengjie,Ren Guang-Kun,Lin Yuan-Hua,Yang Xiaoping
A series of K-doped Bi 1− x
K
x
CuSeO (0 ≤ x ≤ 0.10) compounds were prepared by combustion synthesis combined with spark plasma sintering method. Phase composition and microstructure analysis indicate almost single BiCuSeO phase in low doping level, while phase separation appears in heavy doping level. The thermoelectric properties of the Bi 1− x
K
x
CuSeO compounds have been measured in the temperature range of 323–823 K. The electrical conductivity is greatly enhanced by almost three times from 8.70 to 26.2 S/cm at 323 K by the substitution of Bi with K due to the large decrease of the activation energy. The overall thermal conductivity decreases significantly due to the strong point defect scattering by K doping and possibly enhanced interface scattering on the secondary phase. The maximum ZT reaches 0.6 at 823 K for the sample of x = 0.02, which is about 50% higher than that of the pristine sample. Our work offers a fast and more efficient approach for the fabrication of BiCuSeO-based materials.
研究领域:
材料科学
·
无机非金属材料
·
热电材料
·
固态化学
·
纳米复合材料
✓ 已验证
DOI
高影响因子
CARBON
·
2022
·
IF 11.307
Xu Zhao,Jizhen Zhang,Ke Lv,Na Kong,Yanqiu Shao,Jinlong Tao
Mechanically strong and electrically conducting fibers, particularly those with high specific capacitances, are promising fiber-shaped electrodes for fiber- and textile-based energy storage devices like fiber-shaped supercapacitors (FSCs). However, a high loading of fillers or bridging agents is commonly required to fabricate fiber electrodes with good mechanical strength , which compromises electrical conductivity and energy storage performance. Herein, an easily scalable wet-spinning strategy is reported to fabricate multifunctional Ti 3 C 2 T x MXene/carbon nanotubes (MXene/CNT) hybrid fibers from a harmonious mixture of MXene and CNT in water and using acetic acid as a coagulation bath . The hybrid fiber achieved high strength (61 ± 7 MPa), good conductivity (1142.08 ± 40.04 S cm −1 ) and excellent energy storage performance (∼295 F g −1 at 5 mV s −1 ) at a very low CNT content of ∼1 wt%. When CNT loading increased to ∼9 wt%, the maximum strain at broken reached 161 ± 19 MPa and conductivity further increased to 1715 ± 22 S cm −1 . The excellent mechanical performance allows hybrid fibers to be knitted into textiles for energy storage textiles. The assembled FSCs exhibit energy and power densities of ∼6.08 mW h cm −3 and ∼6440 mW cm −3 , respectively. The excellent performance of MXene/CNT fiber and good feasibility for scalable production will open up new opportunities for the development of wearable and textile-based devices in the near future.
研究领域:
材料科学
·
纳米科技
·
能源存储
·
纺织电子学
·
高分子物理
✓ 已验证
DOI
高影响因子
JOURNAL OF NON-CRYSTALLINE SOLIDS
·
2019
·
IF 2.6
Ang Qiao,Haizheng Tao,Yuanzheng Yue
Amorphous conductors with high ionic conductivity are a promising candidate as electrolytes in all-solid state batteries. In this work, we prepared amorphous Ag 3 PS 4 conductor via a chemo-mechanical milling process, and then characterized its structure and electrochemical properties . The results show that Ag + conductivity of the amorphous Ag 3 PS 4 was remarkably enhanced by three orders of magnitude compared to its crystalline counterpart. Furthermore, the amorphous sample exhibits lower activation energy ( E a ) for ionic conductivity as a function of temperature. Structural characterizations indicate that the tetrahedral [PS 4 ] units were retained in amorphous Ag 3 PS 4 , but the Ag + ions became more liberated than those in the crystalline state, leading to the enhanced migration of Ag + ions, thereby, the ionic conductivity in amorphous Ag 3 PS 4 is drastically increased. This work provides insight into the crucial role of the disorder in raising the ionic conductivity of amorphized chalcogenide materials containing mobile ions.
研究领域:
材料科学
·
固体化学
·
能源材料
·
电化学
·
无机非金属材料
·
固态电池
·
离子传导
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2020
·
IF 7.216
Jingguang Yi,Dan Zhou,Yuhao Liang,Hong Liu,Haifang Ni,Li-Zhen Fan
All-solid-state lithium batteries (ASSLBs) employing sulfide electrolyte and lithium (Li) anode have received increasing attention due to the intrinsic safety and high energy density. However, the thick electrolyte layer and lithium dendrites formed at the electrolyte/Li anode interface hinder the realization of high-performance ASSLBs . Herein, a novel membrane consisting of Li 6 PS 5 Cl (LPSCl), poly(ethylene oxide) (PEO) and Li-salt (LiTFSI) was prepared as sulfide-based composite solid electrolyte (LPSCl-PEO3-LiTFSI) (LPSCl:PEO = 97:3 wt/wt; EO:Li = 8:1 mol/mol), which delivers high ionic conductivity (1.1 × 10 −3 S cm −1 ) and wide electrochemical window (4.9 V vs. Li + /Li) at 25 °C. In addition, an ex-situ artificial solid electrolyte interphase (SEI) film enriched with LiF and Li 3 N was designed as a protective layer on Li anode (Li(SEI)) to suppress the growth of lithium dendrites. Benefiting from the synergy of sulfide-based composite solid electrolyte and ex-situ artificial SEI, cells of S-CNTs/LPSCl-PEO3-LiTFSI/Li(SEI) and Al 2 O 3 @LiNi 0.5 Co 0.3 Mn 0.2 O 2 /LPSCl-PEO3-LiTFSI/Li(SEI) are assembled and both exhibit high initial discharge capacity of 1221.1 mAh g −1 (135.8 mAh g −1 ) and enhanced cycling stability with 81.6% capacity retention over 200 cycles at 0.05 C (89.2% over 100 cycles at 0.1 C). This work provides a new insight into the synergy of composite solid electrolyte and artificial SEI for achieving high-performance ASSLBs .
研究领域:
材料科学
·
电化学
·
能源存储
·
固态电池
·
界面工程
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2017
·
IF 2.354
Yan Sun,Wenning Yan,Li An,Bingbin Wu,Kaifu Zhong,Ruizhi Yang
A super solid electrolyte of Ba-substituted Li 10 GeP 2 S 12 is designed and fabricated to achieve high electrochemical stability. Among the Ba-substituted Li 10 GeP 2 S 12 solid electrolytes, the composition of Li 9.4 Ba 0.3 GeP 2 S 12 exhibits the highest ionic conductivity of 7.04 × 10 − 4 S cm − 1 with an activation energy of 28.27 kJ mol − 1 at 25 °C. The electrochemical window of Li 9.4 Ba 0.3 GeP 2 S 12 is between 0 and 6 V (vs. Li), which is higher than the typical 5 V window of Li 10 GeP 2 S 12 . As compared with Li 10 GeP 2 S 12 , Li 9.4 Ba 0.3 GeP 2 S 12 demonstrates a significantly reduced polarization and a better cycle stability though its ionic conductivity is slightly lower than that of the former. The electrochemical stability of Ba-substituted Li 10 GeP 2 S 12 can be attributed to the structural stability resulting from the stable interaction between Ba 2 + and S 2 − in the structure.
研究领域:
材料科学
·
固态离子学
·
电化学
·
能源材料
·
无机固体化学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 39
·19231-19240
·
IF 9.931
Minjie Xuan,Weidong Xiao,Hongjie Xu,Yonglong Shen,Zhenzhen Li,Shijie Zhang,Zhuo Wang,Guosheng Shao
The development of a solid electrolyte with superb Li+ conductivity is the key to enabling safe and high-performance all-solid lithium ion batteries which are free of the safety issues associated with flammable organic liquid electrolyte. Systematic experimental work has been carried out as a follow up to our recent theoretical prediction that superb ionic conductivity could be achieved through the tuning of the lattice chemistry in the cubic argyrodite Li6PS5Cl. Remarkable enhancement of the ionic conductivity has been achieved through the combined effect of excess Li and substitution of S with Te. This leads to an alloy, Li6.25PTe0.125S5.125Cl0.75, having the superb Li+ conductivity of 4.5 mS cm−1 at 25 °C, together with a low activation energy of 0.16 eV to safeguard adequate ionic conductivity at low temperature. This current work conclusively affirms the theoretical outcome that the superb ionic conductivity is attributed to weakened bonding, an enlarged unit cell, and a softened lattice, making it easier for the long-distance diffusion of Li+. In addition, this new class of solid electrolyte based on cubic chalcogenide is electrochemically compatible with the Li anode over a large potential window up to 7 V, which is highly desirable for high performance solid lithium ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
固体离子学
·
无机化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2018
·
IF 6.578
Xinming Du,Zhe Wang,Wenchang Liu,Jingmei Xu,Zhaoyu Chen,Chunmei Wang
A series of phenolphthalein-based poly (arylene ether ketone) (PEK) copolymer are synthesized to prepare anion exchange membranes (AEMs). The ion group 1-vinyl imidazole is introduced on the unit of phenolphthalein-based as a hydrophilic segment and cross-linking agent. The structure of resulting membranes was investigated by 1 H NMR and FT-IR. The well-defined microphase-separated structures were verified by TEM and SAXS profiles. The cross-linked membrane of ImPEK-0.4 exhibits high hydroxide conductivity (0.0836 S/cm, at 80 °C), excellent mechanical performance (69.6 MPa) and the maximum swelling ratio is only 7.95% at 80 °C. Furthermore, the excellent alkaline stability is demonstrated by immersing the prepared membrane in 1 M NaOH at 40 °C for 400 h. The ionic conductivity is still high to 0.0381 S/cm for ImPEK-0.4. These results indicate that combining phase separation architecture and crosslinking may possess potential applications for alkaline fuel cells (AFCs).
研究领域:
高分子材料科学
·
电化学能源材料
·
燃料电池技术
·
膜分离工程
·
聚合物化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS CHEMISTRY
·
2011
·Vol. 21
·期 18
·6736-6741
·
IF 5.101
Xiwei Zhang,Jiansheng Jie,Zhi Wang,Chunyan Wu,Li Wang,Qiang Peng,Yongqiang Yu,Peng Jiang,Chao Xie
Single-crystal p-type ZnSe nanowires (NWs) with zinc blende structure and [21–1] growth direction were synthesized by using bismuth (Bi) as dopant via a thermal co-evaporation method. The ZnSe : Bi NWs showed evident p-type conductivity with hole concentration up to 4.1 × 1018 cm−3 after the acceptor activation. Negative photoconductivity was first investigated in the p-ZnSe NWs, i.e., the conductivity of the NWs under light was dramatically lower than that in the dark. Surface effects arising from oxygen absorption and photo-desorption were suggested to be responsible for this. By using Al as the Schottky gate, high-performance nano-metal-semiconductor field-effect transistors (nanoMESFETs) were constructed, and measurements on the Al/p-ZnSe NW Schottky diode also revealed the bias-dependent photoresponse. It is expected that the p-type ZnSe : Bi NWs will have great potential in nano-optoelectronic applications.
研究领域:
材料科学
·
半导体物理
·
纳米技术
·
光电子学
·
凝聚态物理
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）