International Journal of Electrochemical Science
·
2023
·Vol. 11
·期 8
·6466-6476
·
IF 1.5
Changling Yan,Jin Li,Tingting Meng,Xun Liu,Ruixing Zhang,Yujuan Chen,Gongke Wang
A simple and reliable method was proposed for rapid detecting ciprofloxacin, based on molecularly imprinted technology. The molecularly imprinted ciprofloxacin hydrochloride (CPX) sensor was prepared by electropolymerization of pyrrole (Py) and o-phenylenediamine (o-PD) on the pencil graphite electrode (PGE). The performance of the sensor was characterized by square wave voltammetry (SWV) using potassium ferricyanide as molecular probe. Under optimal conditions, the sensor displayed high selectivity and stability towards CPX. A linear relationship between the change in current (Δi) and the logarithm of CPX concentrations from 1×10 −9 to 1×10 −3 mol/L was obtained with a detection limit of 7.58×10 −11 mol/L (S/N=3). Furthermore, the MIP sensor was applied for the analysis of real tablet samples with high accuracies.
研究领域:
分析化学
·
药物分析
·
电化学传感
·
分子印迹技术
·
药物残留检测
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Huayong Luo,Xueyang Zeng,Peng Liao,Hongwei Rong,Tian C. Zhang,Z. Jason Zhang,Xiangchao Meng
Currently, there is a growing trend in employing natural biomaterials (e.g., alginate) to prepare a novel bead adsorbent for phosphorus (P) elimination. However, the utilization of alginate beads to remove and recover P from effluents possesses limitations associated with its physical characteristics such as a dense gel layer, poor mechanical strength and low stability. To overcome the limitations and improve the adsorption performances, we synthesized a novel alginate-derived bead constituted of PNIPAM network interpenetrated in alginate-Zr 4+ network (PNIPAM/SA-Zr) decorated with polyethylene glycol as a pore-forming agent, and then investigated its ability to remove and recover P from effluents. The morphology, functional groups, surface area, and mechanical strength of the beads were evaluated by SEM, FTIR , BET, and swelling analysis. The adsorption of P was investigated by varying various factors. The adsorption kinetics , isotherms, and thermodynamics were studied. Particularly, the P-loaded beads exhibited a faster desorption rate under thermal stimulus, and remained good desorption efficiency and reusability within five consecutive cycles. Zeta-potential and XPS results revealed that the adsorption mechanisms were related to electrostatic interactions, ligand exchange, and the formation of inner-sphere complexes. The beads possessed favorable fixed-bed column operation performances for P removal and recovery from real wastewater.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Energy Materials
·
2021
·Vol. 1
·期 2
·N
·
IF 0
Chen Yang,Nannan Gao,Xilong Wang,Jiajia Lu,Lijuan Cao,Yadong Li,Han-Pu Liang
Seawater splitting powered by solar or wind sources is a significant renewable energy storage technology for the production of green hydrogen energy. However, both the chlorine evolution reaction and chloride corrosion are intractable issues in seawater splitting. Here, a porous electrode based on a phosphate-intercalated NiFe (oxy)hydroxide shell coated on a nickel molybdate (NiMoO4) micropillar core (denoted as P-NiFe@NiMoO4) is synthesized through an electrochemical oxidation strategy. During the electrochemical oxidation process, the etching of MoO2 promotes the reconstruction of NiFe (oxy)hydroxide and the formation of porous structures in an alkaline solution. The optimized P-NiFe@NiMoO4 electrocatalysts afford a low overpotential of 258 mV at a current density of 100 mA/cm2 in alkaline seawater. By pairing the anode with a cathode of as-synthesized P-NiMoO, the electrolyzer presents a low voltage of 1.63 V at 100 mA/cm2 in alkaline seawater with excellent stability. Moreover, the remarkable stability of the anode seems to be attributed to the in-situ phosphate formed during the electrochemical oxidation process to passivate chloride corrosion.
研究领域:
电化学
·
能源材料
·
纳米催化
·
可再生能源
·
腐蚀科学
·
功能材料
·
电催化
✓ 已验证
DOI
International Journal of Minerals Metallurgy and Materials
·
2024
·Vol. 31
·期 3
·574-584
·
IF 5.6
Huo Xiangtao,Chai Rongxia,Gou Lizheng,Zhang Mei,Guo Min
The coagulation process is a widely applied technology in water and wastewater treatment. Novel composite polyferric magnesium–silicate–sulfate (PFMS) coagulants were synthesized using Na 2 SiO 3 ·9H 2 O, Fe 2 (SO 4 ) 3 , and MgSO 4 as raw materials in this paper. The effects of aging time, Fe:Si:Mg, and OH:M molar ratios (M represents the metal ions) on the coagulation performance of the as-prepared PFMS were systematically investigated to obtain optimum coagulants. The results showed that PFMS coagulant exhibited good coagulation properties in the treatment of simulated humic acid–kaolin surface water and reactive dye wastewater. When the molar ratio was controlled at Fe:Si:Mg = 2:2:1 and OH:M = 0.32, the obtained PFMS presented excellent stability and a high coagulation efficiency. The removal efficiency of ultraviolet UV 254 was 99.81%, and the residual turbidity of the surface water reached 0.56 NTU at a dosage of 30 mg·L −1 . After standing the coagulant for 120 d in the laboratory, the removal efficiency of UV 254 and residual turbidity of the surface water were 88.12% and 0.68 NTU, respectively, which accord with the surface water treatment requirements. In addition, the coagulation performance in the treatment of reactive dye wastewater was greatly improved by combining the advantages of magnesium and iron salts. Compared with polyferric silicate–sulfate (PFS) and polymagnesium silicate–sulfate (PMS), the PFMS coagulant played a better decolorization role within the pH range of 7–13.
研究领域:
环境工程
·
水处理技术
·
化学合成
·
废水管理
·
材料科学
✓ 已验证
DOI
高影响因子
DESALINATION
·
2023
·
IF 9.9
Xudong Bu,Yurong Zhang,Haiqing Guo,Sheng Wang,Xueyan Du
The ion removal capacity of carbon based capacitive deionization (CDI) is limited by the double-layer mechanism. Replacing one electrode of the conventional carbon-based symmetric CDI with a battery-like ion insertion material to obtain hybrid capacitive deionization (HCDI) can significantly improve the adsorption capacity . Various ion insertion materials have been adopted for HCDI, however, how to optimize the performance of the HCDI system by matching the two electrodes with different ions removal mechanism remains challenging. In this work, a HCDI desalination cell was demonstrated by using NaTi 2 (PO 4 ) 3 /reduced graphene oxide composites (NTP-rGO-700) as the cathode and activated carbon (AC) as the anode. Based on the mass balance strategy of electrodes and the electrochemical behavior of hybrid capacitors with different AC:NTP-rGO-700 mass ratios, the HCDI desalination cell was assembled with the optimal AC:NTP-rGO-700 mass ratio of 2:1. At an operating voltage of 1.6 V and a current density of 125 mA·g −1 , the specific adsorption capacity (SAC) of the HCDI cell can reach 51 mg·g −1 with an average salt adsorption rate (ASAR) of 2 mg·g −1 ·min −1 , and the energy consumption (E m ) is 136.53 kJ·mol −1 . This work provides an efficient approach for developing high performance HCDI cell.
研究领域:
环境科学
·
电化学
·
材料科学
·
水处理技术
·
能源存储
✓ 已验证
DOI
高影响因子
CHINESE CHEMICAL LETTERS
·
2024
·Vol. 36
·期 4
·109730
·
IF 9.4
Hongyuan Sha,Dongling Yang,Yanran Shang,Zujian Wang,Rongbing Su,Chao He,Xiaoming Yang,Xifa Long
Sulfates are always promising short-wave ultraviolet (UV) nonlinear optical (NLO) candidates, if their birefringence could be greatly improved. Here, in terms of the insufficient birefringence , the unity of heteroleptic tetrahedral groups and triangular ones was proposed and implemented. Thus, a new semi-organic crystal, [C(NH 2 ) 3 ]S 3 O 6 (G 2 S 3 O 6 ), was obtained, which is composed of [S 3 O 6 ] 2− and [C(NH 2 ) 3 ] + groups. It exhibits excellent optical properties with a short absorption cutoff edge of 218 nm, a strong NLO response of 1.4 × KH 2 PO 4 , and more especially, a large birefringence of 0.097@546 nm. This birefringence leap makes the G 2 S 3 O 6 crystal achieve a phase-matching behavior under a 532 nm laser. Thus, the synergy of [S 3 O 6 ] 2− and [C(NH 2 ) 3 ] + groups results in excellent optical performances. This finding opens a new horizon for exploring novel UV NLO crystals.
研究领域:
材料科学
·
光学工程
·
无机化学
·
晶体化学
·
非线性光学
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Yuxing Sun,Lei Zhao,Juan Yang,Xiang Wang,Huanjun Peng,Jingdong Peng
Light absorption range, recycling stability and charge transfer efficiency are key to the performance of photocatalytic material. Based on these targets, a Al doped TiO 2 catalyst was synthesized by the evaporation-induced process, after processed by NaBH 4 reduction, the black TiO 2 doped with Al was finally prepared. Uv-vis DRS, EPR and XPS analyses confirm the expanded light absorption window (300 nm - 1000 nm) and the introduction of abundant oxygen vacancy after the reduction process. The final product BTiO 2 /Al-0.5 has a degradation rate of about 84 % over the tetracycline hydrochloride within 60 minutes, the reaction rate constant (k) is 10.6 times higher than the unreduced sample. The dramatic change of photocatalytic ability can be assigned to the broadened visible light absorption , increased charge separation efficiency, narrowed band gap and defect-enriched oxygen vacancy . This work offers insights into the fabrication of TiO 2 catalyst and the introduction of oxygen defect.
研究领域:
材料科学
·
光催化
·
环境功能材料
·
纳米材料
·
表面化学
·
半导体催化
✓ 已验证
DOI
高影响因子
Analytical Methods
·
2017
·Vol. 9
·期 35
·5140-5148
·
IF 1.9
Guangran Ma,Min Yang,Fugang Xu,Li Wang
In this study, a polyoxometalate (POM) and graphene oxide (GO) were hydrothermally treated to form a novel three-dimensional (3D) macroporous hybrid 3D-mp-rGO–POM for nitrite sensing. Scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, Raman spectroscopy and electrochemical methods were used to characterize the hybrid. The 3D porous rGO not only obviously enhances the conductivity and largely increases the active surface area, but also greatly facilitates the mass transport and efficiently decreases the leaching of the POM from the modified electrode. The synergistic interaction between the POM and 3D porous rGO endows 3D-mp-rGO–POM with a highly stable and efficient electrocatalytic activity towards the oxidation of nitrite. A nonenzymatic sensor for nitrite based on this hybrid shows two linear response ranges of 0.5 μM to 221 μM and 0.221 mM to 15.221 mM, with a detection limit of 0.2 μM (S/N = 3), which displays higher sensitivity, higher stability, a wider linear range and a lower detection limit than sensors based on POMs or 2D-rGO supported POM hybrids. Interference from H2O2 was effectively avoided by monitoring the oxidation current of nitrite instead of its reduction current. The 3D-mp-rGO–POM hybrid with facile preparation, high stability and good catalytic activity may have promising applications in catalysis, sensors, and so on.
研究领域:
分析化学
·
电化学传感
·
纳米材料
·
环境监测
·
食品安全
·
生物传感
·
催化化学
✓ 已验证
DOI
高影响因子
FIBERS AND POLYMERS
·
2023
·Vol. 24
·期 8
·2743-2750
·
IF 2.5
Fu Sida,Li Haidong,Jiang Yue,Zhao Yan,Xu Zhiguang
In this study, superamphiphilic fabrics with under-oil superhydrophilic property have been prepared using trimesoyl chloride (TMC), tetrakis(hydroxymethyl) phosphonium chloride (THPC), and urea as coating materials. Owing to the unique under-oil superhydrophilicity, the coated fabric is able to absorb water droplets dispersed in oil, and oil stains on the coated fabric (dry) can be easily cleaned off just by rinsing with water (without the use of detergent), showing strong anti-oil-fouling ability. The coating is durable enough to withstand at least 50 cycles of home laundering, 1000 cycles of Martindale abrasions, as well as acid/base etching for 12 h without losing its under-oil superhydrophilic property. Meanwhile, the coated fabric exhibits excellent flame-retardant properties, with an oxygen limiting index (LOI) of 39.5% and a char length of 8.5 cm in vertical flame test. This multi-functional coating may find wide applications in functional textiles, water recovery, and flame-retardant field.
研究领域:
功能纺织品
·
表面工程
·
阻燃材料
·
油水分离
·
材料科学
✓ 已验证
DOI
高影响因子
Frontiers of Environmental Science & Engineering
·
2023
·Vol. 18
·期 3
·1-10
·
IF 6.4
Zhang Yuyao,Jia Litao,Zhao Jin,Liu Xuming,Dong Shuyu,Liu Chuanyang,Cui Yuanyuan
The feasibility of simultaneous water recovery, salt separation and effective descaling of hypersaline brine was investigated by diisopropylamine (DIPA)-based directional solvent extraction (DSE), using diluted/concentrated seawater with initial saline concentration range of 12–237 g/L at extraction temperatures of 5 and 15 °C, respectively. The water recovery shows an obvious boundary at saline concentration of 115 g/L under dual effect of specific water extraction efficiency and extraction cycles. High Cl − ion concentration in product water is in sharp contrast to the nearly complete removal of SO 4 2− and hardness ions, indicating that DIPA-based DSE process indeed achieved efficient separation and purification of Cl − ion from hypersaline brines. Especially, the radical precipitation of Mg 2+ and Ca 2+ ions in form of Mg(OH) 2 and CaCO 3 demonstrates effective descaling potential, although it leads to more DIPA residues in dewatered raffinate than product water. Moreover, an exponential correlation between the Cl − removal efficiency and specific water extraction efficiency further reveals the intrinsic relationship of water extraction process and transfer of Cl − ion to the product water. Overall, the study provides a novel approach for integrating the water recovery and separation of Cl − ion from ultra-high-salinity brines with radical precipitation of Mg 2+ and Ca 2+ ions in one step.
研究领域:
化学工程
·
环境科学
·
分离技术
·
水处理
·
海水淡化
✓ 已验证
DOI
高影响因子
OPTICS AND LASER TECHNOLOGY
·
2016
·
IF 1.879
Rong Chen,Ying Tian,Bingpeng Li,Feifei Huang,Caizhi Wang,Xufeng Jing,Junjie Zhang,Shiqing Xu
Nd 3+ /Ho 3+ co-doped silicate-germanate glass has been synthesized by high temperature melt-quenching method. Near infrared emission centered at 2 µm has been successfully obtained by incorporating Nd 3+ and Ho 3+ in present glass. The Judd-Ofelt intensity parameters Ω t (t=2, 4, 6), and radiative properties of Ho 3+ were calculated and discussed by using the Judd-Ofelt theory. The energy transfer processes and luminescence properties of Nd 3+ /Ho 3+ co-doped glasses were analyzed pumped by a conventional 808 nm laser diode . Desirable spectroscopic characteristics indicates that Nd 3+ /Ho 3+ co-doped silicate-germanate glass might be a good alternative matrix for 2 µm band mid-infrared laser.
研究领域:
光学材料
·
无机非金属材料
·
光子学
·
激光技术
·
固体物理
✓ 已验证
DOI
高影响因子
Inorganic Chemistry Frontiers
·
2023
·Vol. 10
·期 16
·4711-4718
·
IF 7
Jingjing Zhang,Ruqing Wei,Daqing Yang,Ying Wang,Bingbing Zhang
Nonlinear optical (NLO) materials have been applied in many high technology fields. In this work, the first-principles high-throughput screening pipeline (FHSP) has been used for searching NLO materials from the silicate system. 253 silicates collected in the Inorganic Crystal Structural Database (ICSD) have been successfully calculated. Among them, 8 crystals were screened out after two-step evaluation. Finally, 3 compounds were selected for synthesis after comprehensive investigation. The SHG intensities tested using the Kurtz–Perry method of KNbSi2O7, PbZnSiO4, and Na2TiSiO5 are 6.7, 2.9, and 2.8 times that of KDP, respectively. Their UV absorption edges are 243 nm, 276 nm, and 280 nm, respectively. This work provides a full view of silicates as NLO materials and obtains excellent candidates for the next step of development.
研究领域:
材料科学
·
计算化学
·
晶体学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）