SENSORS AND ACTUATORS A-PHYSICAL
·
2024
·
IF 4.1
Chengxu Lin,Chenyu Li,Rui Liu,Xuning Zhang,Xingyue Liu,Bo Sun,Tielin Shi,Zhiyong Liu,Guanglan Liao
The perovskite scintillators have been extensively studied recently for their merits of tunable emission spectra and simple preparation processes. However, the practical applications of perovskite scintillator-based X-ray image sensor are still impeded by inadequate radioluminescence, poor environmental stability, and low imaging resolution. Herein, we demonstrate a scalable co-firing method to fabricate high-quality lead-free Cs 3 Cu 2 I 5 perovskite scintillator and an Indium (In)-doping strategy is introduced to enhance its radioluminescence performance at the same time. The In-doped Cs 3 Cu 2 I 5 obtains a high PLQY of 77.9% and a relative light output of 53372 ph/MeV, which are 0.34 and 1.08 times higher than those of the undoped counterpart, respectively. The X-ray detection limit of the In:Cs 3 Cu 2 I 5 can reach 150.55 nGy air /s, 36.53 times lower than the requirement for X-ray medical diagnosis. The synthesized scintillator also shows superior stability under continuous high dose X-ray irradiation of 6800 μGy air /s for 120 minutes, maintaining 95% of its initial radioluminescence intensity. Furthermore, a large-area (300 cm 2 ) flexible perovskite scintillator film is prepared, which owns a much competitive resolution of 10 lp/mm and less distortion in X-ray imaging. This work provides a practical path for the wide application of perovskite scintillator in the field of X-ray detection and imaging in near future.
研究领域:
材料科学
·
医学影像
·
放射学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry C
·
2023
·Vol. 11
·期 25
·8524-8532
·
IF 6.4
Luojia Huang,Hangtao Ye,Weidong Xiang,Hongbin Fan,Xiaojuan Liang
Zero-dimensional lead-free metal halides Cs3Cu2X5 (X = Cl, Br, and I) have attracted much attention in recent years due to their unique structure, photoelectric properties and environment-friendly nature; unfortunately they are sensitive to humidity. Herein, Cs3Cu2I5 nanocrystals (NCs) were successfully precipitated in situ within glass using the methods of melt quenching and heat treatment (Cs3Cu2I5 glass ceramic). The optical characterization and morphological characterization provide evidence for the successful in situ precipitation of the Cs3Cu2I5 glass ceramic, and the photoluminescence quantum yield (PLQY) is as high as 63.3%. The water stability of Cs3Cu2I5 NCs is greatly improved due to the inorganic glass matrix, and the fluorescence intensity remains largely unchanged for 30 days. The Cs3Cu2I5 glass ceramic endows Cs3Cu2I5 NCs with a wider range of application areas. Finally, by constructing an X-ray imaging system using Cs3Cu2I5 glass ceramics, springs in opaque samples were observed to be visible, demonstrating the great potential of Cs3Cu2I5 glass ceramics with long-term stability for X-ray detection imaging.
研究领域:
材料科学
·
光学工程
·
医学影像
✓ 已验证
产品关联
DOI
高影响因子
Materials Chemistry Frontiers
·
2021
·Vol. 5
·期 16
·6152-6159
·
IF 6.482
Xudong Hu,Yuelei Li,Ye Wu,Weiwei Chen,Haibo Zeng,Xiaoming Li
Copper halide Cs3Cu2X5 (X = Cl, Br, I) nanocrystals (NCs) have become a research hotspot in recent years. Compared with perovskite NCs, they have a large Stokes shift with a self-absorption-free effect and convenient solution processability, which endows them with potential applications in high-resolution flexible X-ray imaging and ultraviolet detection. However, the synthesis of Cs3Cu2I5 NCs is limited to the hot-injection method, which needs tedious operation procedures. Here, a one-pot fabrication strategy was designed based on the principle of chemical potential and thermodynamic equilibrium to achieve the mass production of Cs3Cu2I5 NCs. With the assistance of I−, Cs3Cu2I5 NCs were successfully fabricated with a reaction yield of about 70%, with the emission peak located at 445 nm and a high photoluminescence quantum yield (PLQY) of 72.6%. By scaling up the initial reaction volume tenfold, we successfully demonstrated mass production. Furthermore, Cs3Cu2Br5 and Cs3Cu2Cl5 NCs were also fabricated using this approach, indicating the versatility of this method. This strategy effectively optimizes the experimental process and cost, providing convenience for subsequent research based on this kind of material, such as optical electronic devices, ion-doping studies and so on.
研究领域:
材料科学
·
纳米技术
·
光电技术
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2022
·Vol. 28
·期 46
·e202200877
·
IF 5.02
Junfeng Qu,Shuhong Xu,Yiping Cui,Chunlei Wang
Graphical Cd-doped Cs 3 Cu 2 I 5 was synthesized by room-temperature grinding. [CuI 4 ] and [CdI 4 ] tetrahedrons act as photoluminescent centers separately, resulting in the emission colour manipulated by not only Cd feeding amount but also excitation wavelength. The as-prepared Cd-doped Cs 3 Cu 2 I 5 was made into anti-counterfeiting ink and printed on paper. The pattern shows different colours when the excitation wavelength increases from 310 nm to 330 nm. With the development of intellectual properties, concern about advanced anti-counterfeiting is accumulating, which conventional single-modal luminescence can no longer satisfy. As one of rapidly developing 0D materials, copper-based perovskite shows great potential to realize multiple luminescent centers for complex emissions. In this work, Cd was doped into Cs 3 Cu 2 I 5 and showed resultant emission at 560 nm which surprisingly showed a red-shifted excitation peak from that of intrinsic self-trapped emission, resulting in excitation-wavelength dependent emission. When the excitation wavelength increased from 290 nm to 330 nm, the emission of Cd-doped Cs 3 Cu 2 I 5 changed from deep blue to cold white and finally yellow. Afterwards, Cd-doped Cs 3 Cu 2 I 5 was mixed with polystyrene to prepare anti-counterfeiting ink for silk-screen printing. Meanwhile, Cd-doped Cs 3 Cu 2 I 5 maintains outstanding stability after doping, no matter under ambient, continuous UV radiation or high-temperature environment. The intensity can be almost totally recovered after heating-and-cooling cycles. This study lays groundwork for future research into multiple luminescent center manipulation in 0D materials.
研究领域:
材料科学
·
光电子学
·
纳米技术
·
防伪技术
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2023
·
IF 13.1
Tao Chen,Xin Li,Yong Wang,Feng Lin,Ruliang Liu,Wenhua Zhang,Jie Yang,Rongfei Wang,Xiaoming Wen,Bin Meng,Xuhui Xu,Chong Wang
Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging, yet the issues of the poor chemical stability of hybrid halide perovskite, the high poisonousness of lead halides and the relatively low detectivity of the lead-free halide perovskites which seriously restrain its commercialization. Here, we developed a solution inverse temperature crystal growth (ITCG) method to bring-up high quality Cs 3 Cu 2 I 5 crystals with large size of centimeter order, in which the oleic acid (OA) is introduced as an antioxidative ligand to inhibit the oxidation of cuprous ions effieiently, as well as to decelerate the crystallization rate remarkalby. Based on these fine crystals, the vapor deposition technique is empolyed to prepare high quality Cs 3 Cu 2 I 5 films for efficient X-ray imaging. Smooth surface morphology, high light yields and short decay time endow the Cs 3 Cu 2 I 5 films with strong radioluminescence, high resolution (12 lp/mm), low detection limits (53 nGy air /s) and desirable stability. Subsequently, the Cs 3 Cu 2 I 5 films have been applied to the practical radiography which exhibit superior X-ray imaging performance. Our work provides a paradigm to fabricate nonpoisonous and chemically stable inorganic halide perovskite for X-ray imaging.
研究领域:
材料科学
·
放射学
·
晶体生长
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
Advanced Optical Materials
·
2024
·
IF 8
Panyi Wang,Mengmeng Meng,Man Nie,Xiaoyu Hu,Peiqing Cai,Muzhi Cai,Lei Lei,Laurent Calvez,Xianghua Zhang,Shiqing Xu
The development of all-inorganic lead-free Cs 3 Cu 2 I 5 perovskite materials has garnered significant attention due to their non-toxic nature and unique optoelectronic properties, particularly in the field of X-ray detection. However, the stability of perovskites remains a major concern for their optical applications. In this study, a highly stable Cs 3 Cu 2 I 5 -in-glass composite (Cs 3 Cu 2 I 5 @Borosilicate) is fabricated by spark plasma sintering (SPS), a rapid and low-temperature sintering process. The Cs 3 Cu 2 I 5 @Borosilicate composite exhibits strong photoluminescence even after prolonged immersion in various polar solvents, whereas Cs 3 Cu 2 I 5 perovskite loses its photoluminescence within seconds. Moreover, the Cs 3 Cu 2 I 5 @Borosilicate composite demonstrates robust radio-luminescence under X-ray irradiation, and its potential as a scintillator material is validated through prototype X-ray imaging with a high spatial resolution (≈7 lp mm −1 ). This innovative composite material holds immense potential for scintillation applications and represents a promising approach for encapsulating perovskites in a transparent amorphous medium.
研究领域:
材料科学
·
光电技术
·
放射学
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2023
·
IF 3.6
Min Ye,Fangyuan Lin,Lingou Yang,Jingwen Jin,Xuelian Liu,Yiru Wang,Xi Chen
In this study, a kind of lead-free Cu(I) halide perovskites , Cs 3 Cu 2 I 5 , is synthesized and applied for temperature sensing. A composite thin film combining Cs 3 Cu 2 I 5 with polymethyl methacrylate (PMMA) is developed for optical temperature sensing under different environmental conditions. The Cs 3 Cu 2 I 5 -PMMA films immersed in aqueous solutions exhibit stable sensing ability for at least 24 h, and show fully reversible sensing responses for the temperature change in the range from 30 °C to 80 °C with a temperature sensitivity up to 2.3% K −1 . The sensing performance and stability of the Cs 3 Cu 2 I 5 -PMMA film show that it can be a type of temperature sensing materials with great potential. This work opens up a new use of lead-free copper-based halide perovskites and provides a new temperature sensing material.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
Laser & Photonics Reviews
·
2026
·
IF 9.7
Wei Zhou,Xingchen Zhang,Xiaoxiao Zhuang,Ziheng Ruan,Wenjuan Zhu,Bing Chen
Low-dimensional Cu(I)-based metal halides are attractive luminescent materials for optoelectronics and radiation detection, but achieving precise control over their multimodal emission and scintillation performance remains challenging. Here, the acetate anion is introduced into zero-dimensional Cs 3 Cu 2 I 5 to engineer excitation-wavelength-dependent emission and scintillation. The acetate-doped Cs 3 Cu 2 I 5 crystals show dual-band photoluminescence, switching from blue to green emission with increasing excitation wavelength. Spectroscopic analyses and theoretical calculations suggest that this behavior is most plausibly associated with the coexistence of host self-trapped excitons (STEs) and dopant-induced extrinsic STEs. Acetate doping also increases the radioluminescence output and improves the scintillation response of Cs 3 Cu 2 I 5 crystals, affording a high light yield of 57 600 photons MeV −1 , a low detection limit of 166.6 nGy air s −1 , and a high spatial resolution of 18 lp mm −1 in flexible scintillator films. This work establishes organic-anion doping as an effective route to modulate the excited-state landscape and scintillation behavior of full inorganic Cu(I)-based halides and expands their opportunities in light-emitting devices and high-energy radiation detection.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Wanqiu Yang,Zhicheng Wang,Xudong Hu,Yingjun Chai,Gaoyu Liu,Shengli Zhang,Haibo Zeng,Xiaoming Li
Scintillator films with high light output and low cross-talk are essential for highly sensitive and high-resolution X-ray imaging applications. However, only specific scintillators prepared with high-cost method or pixelated template meet these demands. Solution processed strategies possess the merit of low-cost while scintillator particles are usually in chaos with severe light scattering, especially for thick films up to hundreds of microns, resulting in poor imaging sensitivity and resolution. Herein, we demonstrate that low-symmetrical zero-dimensional Cs 3 Cu 2 I 5 scintillator can grow longitudinally with spray-coating strategy with the assistance of crystal facet inhibitor. The additive, triallyl isocyanurate, exhibits preferred crystal face binding ability, inducing oriented growth and well-defined columnar structure with large thickness more than one hundred microns. The final scintillator films show higher luminescence polarity and light output, contributing to remarkable improvement in light yield and imaging resolution of 71% and 81% compared with the control sample, respectively. Besides, the added monomer crosslinks under annealing and provide robust protection, leading to excellent radiation hardness and storage stability under ambient environment. By virtue of the negligible afterglow, artifact-free X-ray imaging at a frame rate of 3840 fps is fulfilled, indicating the promising prospects of this strategy for application in low-cost, high-performance fast X-ray imaging.
研究领域:
材料科学
·
医学影像
·
光学
✓ 已验证
产品关联
DOI
高影响因子
Photonics Research
·
2024
·Vol. 12
·期 2
·369-376
·
IF 6.6
Rui Liu,Zhiyong Liu,Chengxu Lin,Guangda Niu,Xuning Zhang,Bo Sun,Tielin Shi,Guanglan Liao,Guanglan Liao
Scintillators are widely utilized in high-energy radiation detection in view of their high light yield and short fluorescence decay time. However, constrained by their current shortcomings, such as complex fabrication procedures, high temperature, and difficulty in the large scale, it is difficult to meet the increasing demand for cost-effective, flexible, and environment-friendly X-ray detection using traditional scintillators. Perovskite-related cesium copper halide scintillators have recently received multitudinous research due to their tunable emission wavelength, high photoluminescence quantum yield (PLQY), and excellent optical properties. Herein, we demonstrated a facile solution-synthesis route for indium-doped all-inorganic cesium copper iodide (Cs3Cu2I5) powders and a high scintillation yield flexible film utilizing indium-doped Cs3Cu2I5 powders. The large area flexible films achieved a PLQY as high as 90.2% by appropriately adjusting the indium doping concentration, much higher than the undoped one (73.9%). Moreover, benefiting from low self-absorption and high PLQY, the Cs3Cu2I5:In films exhibited ultralow detection limit of 56.2 nGy/s, high spatial resolution up to 11.3 lp/mm, and marvelous relative light output with strong stability, facilitating that Cs3Cu2I5:In films are excellent candidates for X-ray medical radiography. Our work provides an effective strategy for developing environment-friendly, low-cost, and efficient scintillator films, showing great potential in the application of high-performance X-ray imaging.
研究领域:
材料科学
·
医学影像
·
放射学
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Yuanzhi Tang,Hao Ling,Sixian Chen,Le Xu,Jian Zhang,Tao Wang,Haibin Sun,Xue Guo,Yurun Feng,Qiangqiang Hu,Zhitai Jia
All-inorganic lead-free Cs 3 Cu 2 I 5 crystals exhibit remarkable structural stability and have shown significant potential for applications in scintillators and luminescent materials. In this study, Cs 3 Cu 2 I 5 single crystal at the centimeter scale has been successfully grown with the hydroiodic acid (HI) solution by the bottom seeded solution growth (BSSG) method. The X-ray diffraction (XRD) and TG-DSC results have confirmed its excellent environmental stability. The crystal has shown prominent UV absorption peaks at 270 nm and 352 nm, with a bandgap of 2.49 eV. The as-grown crystal exhibits blue luminescence under ultraviolet irradiation, with the main PL spectral peak positioned at 452 nm and corresponding CIE color coordinates of (0.15, 0.11). Overall, the growth of large-size Cs 3 Cu 2 I 5 crystals, coupled with their optical properties, suggests potential applications in the field of luminescent materials.
✓ 已验证
产品关联
DOI
高影响因子
Energy & Environmental Materials
·
2024
·
IF 13
Shasha Gao,Yongchao Cheng,Lu Chen,Sheng Huang
In this study, a framework for predicting the gas-sensitive properties of gas-sensitive materials by combining machine learning and density functional theory (DFT) has been proposed. The framework rapidly predicts the gas response of materials by establishing relationships between multisource physical parameters and gas-sensitive properties. In order to prove its effectiveness, the perovskite Cs 3 Cu 2 I 5 has been selected as the representative material. The physical parameters before and after the adsorption of various gases have been calculated using DFT, and then a machine learning model has been trained based on these parameters. Previous studies have shown that a single physical parameter alone is not enough to accurately predict the gas sensitivity of materials. Therefore, a variety of physical parameters have been selected for machine learning, and the final machine learning model achieved 92% accuracy in predicting gas sensitivity. It is important to note that although there have been no previous reports on the response of Cs 3 Cu 2 I 5 to hydrogen sulfide, the resulting model predicts the gas response of H 2 S; it is subsequently confirmed experimentally. This method not only enhances the understanding of the gas sensing mechanism, but also has a universal nature, making it suitable for the development of various new gas-sensitive materials.
研究领域:
材料科学
·
计算化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）