MICROCHIMICA ACTA
·
2025
·Vol. 192
·期 3
·1-10
·
IF 5.3
Han Hongyu,Huang Yiqun,Miao Junjian,Lai Keqiang
Surface-enhanced Raman spectroscopy (SERS) was combined with stoichiometric analysis to synthesize a AuNPs@MIL-100 (Fe) SERS substrate. This high-performance, and low-cost metal–organic framework-based SERS nano sensor is capable of detecting malachite green (MG) residues in fish. The minimum detectable concentration of MG in standard solutions is 0.1 μg/L, while in fish samples, the detection range spanned from 0.003–0.088 μg/kg. The partial least squares regression (PLSR) and support vector machine regression (SVR) were applied to model the SERS data, enhancing both the precision and reliability of the detection. The results show that compared with the traditional linear regression and PLSR models, the prediction accuracy of the SVR model is an improvement with higher stability. MG standard solutions and three fish samples can be analysed directly or after simple extraction. This method can be used to detect trace harmful substances in different aquatic products. Graphical
研究领域:
食品安全
·
分析化学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Pengfei Zhu,Mengrong Geng,Shuang Qin,Heyang Cao,Zhenhong He,Xinhua Gao,Chuanyi Wang
The conversion of CO 2 into chemical products or fuels of great value always remains an outstanding challenge. Here, we report a heterojunction Fe@C/Ni 2 P composite catalyst obtained by preparing MIL-100(Fe) derived Fe@C confined Ni 2 P nanoparticles, which is applied to photothermal catalytic CO 2 hydrogenation with H 2 O. Without adding any sacrificial agents or co-catalysts, the optimal Fe@C/Ni 2 P sample shows higher yields for CO 2 -to-C 2 H 6 and CO 2 -to-CO yield of 5.83 μmol g −1 h −1 and 179.9 μmol g −1 h −1 than that of pristine Fe@C and Ni 2 P, respectively. The experimental results indicated that the obtained Fe@C/Ni 2 P can act as catalytic sites to adsorb, activate, and convert CO 2 under low-intensity LED light irradiation (420 nm) with a temperature of 200 ℃. The physical structure, photochemical properties and energy band structure of the Fe@C/Ni 2 P composite catalysts were investigated by XRD, XPS, FT-IR, TEM, BET, respectively. Furthermore, the reaction pathway of Fe@C/Ni 2 P photothermal catalytic CO 2 hydrogenation with H 2 O to C2 products and CO were systematically analyzed by in situ infrared spectroscopy (DRIFTS).
研究领域:
化学
·
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS CHEMISTRY
·
2012
·Vol. 22
·期 15
·7449-7455
·
IF 5.968
Shu-Hui Huo,Xiu-Ping Yan
The adsorption of malachite green from aqueous solution on a highly porous metal–organic framework MIL-100(Fe) was studied in view of the adsorption isotherm, thermodynamics, kinetics, and regeneration of the sorbent. The adsorption isotherms of malachite green on MIL-100(Fe) followed the Freundlich model, and MIL-100(Fe) possessed heterogeneous surface caused by the presence of different functional groups on the surface. The adsorption of malachite green on MIL-100(Fe) is controlled by an entropy effect rather than an enthalpy change, and obeyed a pseudo-second-order kinetics. Analysis of the intraparticle diffusion plots revealed that more than one process affected the adsorption, and film (boundary layer) diffusion controlled the adsorption rate at the beginning. Evidence from zeta potential and X-ray photoelectron spectroscopic data showed that the adsorption of malachite green was also driven by electrostatic attraction and the interaction between the Lewis base –N(CH3)2 in malachite green and the water molecule coordinated metal sites of MIL-100(Fe). MIL-100(Fe) gave much higher adsorption capacity for malachite green than other conventional adsorbents such as activated carbon and natural zeolite. The high adsorption capacity, good solvent stability, and excellent reusability make MIL-100(Fe) attractive for the removal of MG from aqueous solution.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Jun Liu,Hui Wang,Wen-Yao Zhu,Heng-Xue Xie,Xin Li,Wen-Juan Li,Ge Bai,Meng-Jie Chang,Xiao-Jiao Chai,Hui-Ling Du,Shi-Jie Song
We present a novel method to facilely prepare magnetically recoverable AgCl/Fe 3 O 4 @MIL-100(Fe) (ACFM) nanostructures for photocatalytic degradation of rhodamine B (RhB). The ACFM was directly prepared via a simple successive ionic layer adsorption and reaction (SILAR) deposition of MIL-100(Fe) on solvothermal synthesized Ag/Fe 3 O 4 nanoparticles , in which process Ag was completely oxidized into AgCl concurrent with the formation of MIL-100(Fe). The ACFM prepared with 15 SILAR cycles exhibits 92.9% efficiency towards photodegrading RhB within 30 min under visible light illumination, which is higher than that of the individual structure of AgCl/Fe 3 O 4 , Ag/Fe 3 O 4 @MIL-100(Fe) or Fe 3 O 4 @MIL-100(Fe). The remarkably enhanced photocatalytic performance is attributed to the abundant active sites and sufficient visible light response of MIL-100(Fe), as well as effective charge separation at the heterojunction interface between AgCl and MIL-100(Fe). Furthermore, the obtained ACFM can be quickly separated from the pollutant solution with a magnet and possesses good stability for recycling photocatalysis . In light of the study, the ACFM nanostructures are believed to be applied as promising photocatalysts for practical applications.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
ChemCatChem
·
2024
·
IF 3.8
Chengzhuo Yu,Jin Xu,Yarui Wang,Silong Wang,Li Xiong,Fanglan Geng,Zesen Shang,Huasheng Wu,Jitao Lv,Lixia Zhao,Yawei Wang
Graphical Untill now, reactive oxygen species (ROS) are difficult to generate in the natural light conditions, since most photocatalysts require external strong stimuli. We surprisingly found the ROS generation on MIL-100(Fe)/TiO 2 driven by mild natural light. The ROS generation patterns and mechanism of MIL-100(Fe)/TiO 2 was revealed by chemiluminescence (CL) and density functional theory (DFT). Reactive oxygen species (ROS), as one kind of the most highly oxidizing oxidants, are difficult to generate and utilize in the natural light conditions, since many materials require external strong stimuli for ROS release to be effective as pollutant degradation or biocide. In this work, we surprisingly found the ROS generation on MIL-100(Fe)/TiO 2 driven by mild natural light. Then ROS generation patterns and mechanism was revealed by chemiluminescence (CL) and density functional theory (DFT). Meanwhile, rhodamine B (RhB) can also be removed by MIL-100(Fe)/TiO 2 under natural light, which further evidence the ROS generation under the natural light. This work provides a new direction for spontaneously generating ROS releasing without external strong stimuli and has the broad potential applications in the field of pollutant degradation or antimicrobials under natural conditions.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
RENEWABLE ENERGY
·
2021
·
IF 8.001
Hui Li,Junchi Wang,Xiaoling Ma,Yangyang Wang,Guoning Li,Min Guo,Ping Cui,Wanpeng Lu,Shoujun Zhou,Mingzhi Yu
Solid catalyst loss is inevitable by using the traditional separation methods of centrifugation or filtration. To this end, the carbonized MIL−100(Fe) is used to support ammonium sulfate ((NH 4 ) 2 SO 4 ) for synthesizing magnetic solid acid on the purpose of biodiesel production . Influence of preparation factors of loading amount, activation temperature, and activation time on catalytic activity are initially evaluated. With that, the prepared catalyst (CIS) is comprehensively investigated to obtain the optimal esterification parameters for biodiesel production . Moreover, characterizations of TG, XRD, BET, SEM, EDS, FTIR, py−FTIR, VSM, XPS, and Hammett indicator are conducted to elucidate the structure−function relationship between physicochemical property and catalytic activity . Results indicated the CIS is a superparamagnetism material with the saturated magnetism of 22 emu/g, which could be easily recovered from mixture with external magnet. Furthermore, the maximum conversion of 95.68% is obtained with mild conditions: molar ratio of methanol/oleic acid of 8:1 and catalyst amount of 8 wt% at 70 °C for 2 h. Negligible impact is detected for CIS with presence of 5 wt% water content, even with 20 wt% water content, the conversion of 85.88% is still achieved.
研究领域:
化学工程
·
催化材料
·
可再生能源
✓ 已验证
产品关联
DOI
高影响因子
Journal of Composites Science
·
2025
·Vol. 9
·期 5
·250
·
IF 3.7
Waheed Rehman,Faiq Saeed,Samia Arain,Muhammad Usman,Bushra Maryam,Xianhua Liu
NiFe2O4and TiO2are widely studied for photoelectrochemical (PEC) applications due to their unique properties. Nitrogen-doped graphene (NG) and metal–organic frameworks (MOFs), such as MIL-100(Fe) (where MIL stands for Materials of Lavoisier Institute), are commonly incorporated to enhance PEC performance by offering a high surface area and facilitating efficient charge transport. Composite systems are commonly employed to overcome the limitations of individual PEC catalysts. In this study, a highly efficient NiFe2O4/NG@MIL-100(Fe)/TiO2photoanode was developed to enhance photoelectrochemical water-splitting performance. The composite was synthesized via a hydrothermal method with a two-step heating process. X-ray diffraction confirmed the expected crystal structures, with peak broadening in NiFe2O4indicating reduced crystallite size and increased lattice strain. X-ray photoelectron spectroscopy of the Ni 2p and Fe 2p regions validated the successful integration of NiFe2O4into the composite. Electrochemical analysis demonstrated excellent performance, with linear sweep voltammetry achieving a peak photocurrent density of 3.5 mA cm−2at 1.23 V (vs RHE). Electrochemical impedance spectroscopy revealed a reduced charge-transfer resistance of 50 Ω, indicating improved charge transport. Optical and electronic properties were evaluated using UV-Vis spectroscopy and Tauc plots, revealing a direct bandgap of 2.1 eV. The composite exhibited stable photocurrent under amperometric J-t testing for 2000 s, demonstrating its durability. These findings underscore the potential of NiFe2O4/NG@MIL-100(Fe)/TiO2as a promising material for renewable energy applications, particularly in photoelectrochemical water splitting.
研究领域:
材料科学
·
能源科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2015
·Vol. 44
·期 41
·18227-18236
·
IF 4.197
Ruowen Liang,Rui Chen,Fenfen Jing,Na Qin,Ling Wu
H3PMo12O40 molecules have been successfully encapsulated in the cavities of MIL-100(Fe) via a facile hydrothermal method (denoted as HPMo@MIL-100(Fe)). A series of characterization has corroborated the insertion of H3PMo12O40 within the cavities of MIL-100(Fe). The resulting HPMo@MIL-100(Fe) nanocomposites have exhibited much higher photoactivity than the original-MIL-100(Fe) toward the photocatalytic selective oxidation of benzylic alcohols and the reduction of Cr(VI) under visible light irradiation (λ ≥ 420 nm). The higher photoactivity of HPMo@MIL-100(Fe) can be attributed to the integrative effect of enhanced light absorption intensity and more efficient separation of photogenerated electron–hole pairs. The host porous structure of MIL-100(Fe) can achieve a uniform composition with H3PMo12O40, which is significantly important for producing highly reactive dispersed H3PMo12O40 molecules and enhancing the photocatalytic activity of HPMo@MIL-100(Fe) nanocomposites. And the immobilized H3PMo12O40 molecules are more convenient for recycling. Importantly, almost no Fe and Mo ions leach from the MIL-100(Fe) during the reaction, which verifies the photostability of the HPMo@MIL-100(Fe). In addition, possible photocatalytic redox reaction mechanisms have been investigated.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHROMATOGRAPHIA
·
2024
·
IF 1.2
Shao Xiaozhen,Xu Guangfu,Chen Jiaquan,Miao Pandeng,Yang Ke,Du Yingxiang,Yu Tao
Metal–organic frameworks (MOFs) have a wide range of applications in separation and analytical sciences due to their unique structures. MIL-100(Fe) was immobilized on the inner wall of the capillary column based on the immobilized cysteine (Cys)-triggered in situ growth (ICISG) strategy. By applying this column to capillary electrophoresis, a novel enantioselective separation system based on MIL-100(Fe) nanomaterial was established. By utilizing lactobionic acid (LA) as the chiral selector and optimizing the experimental conditions such as buffer pH, LA concentration and the methanol addition ratio, the CEC system demonstrated a significantly enhanced enantioseparation ability for six basic drugs. The modified capillary column was characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectroscope (EDS) and X-ray diffractometer. The experimental results showed that MIL-100(Fe) was successfully grown on the inner wall of the capillary column. In the present study, the repeatability of the coated column was investigated and the relative standard deviations (RSDs) of the resolution and the migration time for intra-day, inter-day and inter-column were within 8%, proving the good repeatability of the coated column.
研究领域:
分析化学
·
药物科学
✓ 已验证
产品关联
DOI
高影响因子
Biomedical Physics & Engineering Express
·
2024
·Vol. 10
·期 4
·045004
·
IF 1.3
Mingjia Feng,Yan Li,Yanfang Sun,Tianqi Liu,Khaydar E Yunusov,Guohua Jiang
The transdermal drug delivery based on microneedles (MNs) provides a suitable and painless self-administration for diabetic patients. In this work, the hydrogel-forming MNs were firstly fabricated using poly(vinyl alcohol) (PVA) and chitosan (CS) as matrix. A hypoglycemic drug, metformin (Met), had been loaded into MIL-100(Fe). Then, both of free Met and Met-loaded MIL-100(Fe) were integrated into hydrogel-forming MNs for regulation of blood glucose levels (BGLs) on diabetic rats. After penetrated into the skin, the free Met could be firstly released from MNs. Due to the absorption of interstitial fluid and subsequent release of loaded Met from MIL-100(Fe), leading to a sustainable and long-term drug release behaviors. A notable hypoglycemic effect and low risk of hypoglycemia could be obtained on diabetic rat models in vivo. The as-fabricated hydrogel-forming MNs expected to become a new type of transdermal drug delivery platform for transdermal delivery of high-dose drugs to form a long-term hypoglycemic effect.
研究领域:
药物递送
·
糖尿病治疗
·
材料科学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2024
·
IF 8.2
Guohui Wang,Qixin Zhang,Lailai Qin,Kaixuan Tan,Chunguang Li,Lianshun Li,Tinggui Yang,Xiaojuan Liu
A novel metal-organic framework (MOF) material, MIL-100(Fe)-DMA, was synthesized using the solvothermal method. The structure of the MOF was characterized using scanning electron microscopy-energy dispersive X-ray spectroscopy, N 2 adsorption–desorption isotherms, X-ray diffraction analysis, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and Mössbauer spectroscopy. Batch adsorption experiments were performed to investigate the effects of initial Sr 2+ and Cs + concentrations, adsorption time, pH, and coexisting cations on the adsorption performance of the material. The adsorption mechanism was further elucidated using adsorption kinetics and isotherm models. The results indicated that the adsorption of Sr 2+ and Cs + does not significantly affect the MOF material structure. As reaction time and initial ion concentration increased, the adsorption capacity of MIL-100(Fe)-DMA for Sr 2+ and Cs + increased rapidly and then gradually reached equilibrium. Optimal adsorption occurred under alkaline conditions, with maximum adsorption capacity observed at pH = 8. The adsorption process for Sr 2+ and Cs + was well described by the pseudo-second-order kinetic model, the Weber–Morris model, and the Langmuir adsorption isothermal model. The adsorption process was mainly identified as monolayer chemical adsorption, influenced by multiple factors. Characterization combined with density functional theory calculations revealed that the unsaturated carboxylic acid groups on the surface of the MOFs play a crucial role in the interaction with Sr 2+ and Cs + .
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Environmental Technology & Innovation
·
2022
·
IF 7.758
Zhen Jiao,Zhijia Miao,Heluan An,Qing Li,Xiangyuan Meng
Water eutrophication caused by phosphate emissions has become a serious environmental issue. In this study, we used the solvothermal method to prepare a novel Ce-doped MIL-100(Fe). Scanning electron microscope observations suggest that Ce-doped MIL-100(Fe) consisted of irregular polyhedrons in the size range of tens of micrometers. Spectroscopy results show that cerium atoms (Ce) were successfully doped into the MIL-100(Fe) frameworks. The specific surface area and pore size of the Ce-doped MIL-100(Fe) were 2.6 m 2 /g and 3.4 nm, respectively. Adsorptive kinetics indicated that the pseudo-second-order model with a high correlation coefficient of ( R 2 : 0.9950) fitted better than the pseudo first-order model with R 2 of 0.9436. The adsorptive isotherms showed that for these adsorption reactions, the Langmuir model matched much better than the Freundlich model for this adsorption. These facts suggest that adsorption is chemical sorption, which occurred on a homogeneous surface. The adsorption capacity of the Ce-doped MIL-100(Fe) was as high as 12.03 mg/g. The adsorption capacity of the Ce-doped MIL-100(Fe) depended strongly on the solution pH, ionic strength, and the coexisted ions. The study also found that the precipitation reaction and complexation interaction might be dominated in the adsorption. This study may contribute to the design of bimetal organic frameworks, and might add new insights into the removal of phosphate.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）