Catalysts
·
2024
·Vol. 14
·期 12
·859
·
IF 3.8
Lingji Zhang,Mengke Shi,Shuo Zhang,Feng Yue,Cairong Yang,Yang Meng,Wen Li,Cong Li,Mario Berrettoni,Silvia Zamponi,Yongpeng Ma,Hongzhong Zhang
In response to growing concerns about the greenhouse effect, the direct conversion of atmospheric CO2has become a pivotal research focus. This research utilizes hydrothermal synthesis to develop Bi2WO6/MXene(Ti3C2Tx), which efficiently reduces CO2directly at the gas–solid interface through photothermal synergy, without requiring additional sacrificial agents or alkaline absorption solutions. The results indicate that the CO formation rate is about 216.9 μmol·g−1h−1. Notably, this system demonstrates exceptional selectivity for reducing CO2to CO. The outstanding photothermal catalytic efficiency is attributed to the introduction of MXene, which serves as an efficient and economical co-catalyst. The integration of MXene improves the composite material’s specific surface area and pore structure, enhances its CO2adsorption capacity, and results in the Bi2WO6/MXene hybrid having a shorter charge transfer distance and a larger interface contact area. This ensures superior charge transfer capabilities, ultimately leading to a significant enhancement in the catalytic efficiency of the composite. This study presents a straightforward and highly selective method for capturing and converting atmospheric CO2, offering fresh insights for developing efficient photothermal catalytic materials.
研究领域:
材料科学
·
环境科学
·
化学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Weimin Chen,Daotong Zhang,Kai Yang,Min Luo,Pei Yang,Xiaoyan Zhou
Traditional porous carbon (PC)-based supercapacitors (SCs) are generally stiff and heavy owing to their rigid components and bulky additives, such as binders, conducting materials, and current collectors. Herein, a porous (574.5 m 2 g −1 ), conductive (83.1 S cm −1 ), and flexible MXene (Ti 3 C 2 T x )/cellulose nanofiber (CNF)/PC hybrid film is prepared by strong interfacial interactions among its components via a facile vacuum-filtration method. Three-dimensional PC provides abundant micropores for charge storage and considerable amount of meso/macropores for fast diffusion of ions. Two-dimensional Ti 3 C 2 T x offers a significantly high conductivity of 2.6 × 10 3 S cm −1 and a good film-forming ability. A one-dimensional CNF ensures high mechanical properties with a tensile strength of 38.6 MPa for the hybrid film by binding the adjacent Ti 3 C 2 T x flakes and PC. Additionally, the presence of CNF and PC increases the interlayer distance between Ti 3 C 2 T x flakes, thereby providing more ion-accessible surface areas on Ti 3 C 2 T x and creating open gaps for fast ion transport. Benefiting from these electrochemically attractive properties, this film is further employed as a free-standing electrode to fabricate a high-performance quasi-solid-state SC, which demonstrates an ultrathin thickness of 0.2 mm, a high flexibility, a significantly high areal capacitance of 143 mF cm −2 at 0.1 mA cm −2 , and a large areal energy density of 2.4 μWh cm −2 at 17.5 μW cm −2 , with a high retention of ~50% even after increasing the power density by ~100 fold. This work will pave the way for developing free-standing MXene-based hybrid films that simultaneously possess excellent conductivity, good mechanical properties, and large charge storage capacity for flexible and high-performance SCs.
研究领域:
材料科学
·
能源存储
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Tao Yuan,Zhen Zhang,Qian Liu,Xiu-Tong Liu,Shao-Qu Tao,Chun-li Yao
In recent times, there has been significant interest in the utilization of cellulose nanofiber (CNF) films as the foundation for supercapacitors due to their three-dimensional structure, flexibility and eco-friendliness. An ultrasonic and vacuum filtration method was used to prepare a hybrid film consisting of MXene (Ti 3 C 2 T x ), CNF and liquid metal (LM). The combination of CNF and LM with MXene produces a porous structure with higher electrical conductivity, which facilitates the transportation of ions and electrons within the composition and confers the material with heightened electrochemical properties. The CNF/MXene/LM electrode has a significant area capacitance of 871.3 mF cm −2 at a current density of 5 mA cm −2 . The hybrid film demonstrates excellent stability, maintaining a high conductivity of 546.4 S∙cm −1 and retaining 96.9 % capacitance after 2000 cycles at a current density of 10 mA cm −2 . By utilizing the thin film as an electrode, a high-performance quasi-solid supercapacitor was fabricated, with a remarkably thin thickness of only 0.319 mm. Supercapacitors show exceptional electrical properties, including a surface-specific capacitance of 188.2 mF cm −2 at a current density of 5 mA cm −2 . This study indicates that flexible electrodes made from cellulose nanofiber have extensive potential in the realm of supercapacitors.
研究领域:
材料科学
·
能源存储
·
纳米技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Yan Zhang,Jin Yu,Jiayu Lu,Chenjie Zhu,Dongming Qi
Rapid growing of electronics has not only caused severe electromagnetic wave pollution, but also created a risk of fire and explosion. Therefore, developing ultralight, fire-resistant, high-performance electromagnetic interference (EMI) shielding materials are imperative but also challenging. Considering the outstanding metallic conductivity and high aspect ratio, 2D Ti 3 C 2 T x has been reported to be one of the most promising candidates for exhibiting excellent EMI shielding performance. Herein, we demonstrate a facile method to fabricate cellulose nanofiber (CNF)/ammonium polyphosphate (APP)/Ti 3 C 2 T x composite aerogels via a simple freeze-drying method. The resultant CNF/APP/Ti 3 C 2 T x composite aerogels exhibited excellent fire-resistance without obvious shrinkage when placed over the flame of an alcohol burner. Besides, the 8-mm-thick composite aerogel with 60% of Ti 3 C 2 T x showed an average EMI shielding effectiveness of 55 dB (specific EMI shielding effectiveness/thickness could be ~5729 dB cm 2 g −1 ) with an absorption-dominant mechanism. This performance is owing to the relative high electrical conductivity (12 S/m) and multiple reflections from the porous structure. These characteristics make the composite aerogel a much more competitive product for a high-performance EMI shielding material.
研究领域:
材料科学
·
电子工程
✓ 已验证
产品关联
DOI
高影响因子
Frontiers in Chemistry
·
2022
·
IF 5.545
Hu Yingzi,Xu Zhiliang,Pu Junmei,Hu Lanping,Zi You,Wang Mengke,Feng Xingmei,Huang Weichun
The bacterial accumulation at the margins of dental resin composites is a main cause of secondary caries, which may further lead to prosthodontic failure. In this regard, this study for the first time incorporated 2D MXene Ti3C2Tx nanosheets (NSs) into epoxy resin at different mass ratios (0, 0.5, 1.0, and 2.0 wt%) by solution blending and direct curing for dental applications. Compared to the pure resin, the as-fabricated MXene/resin composite not only exhibited improved mechanical and abrasive results but also displayed gradually improved antibacterial activity with MXene loading which was further enhanced by illumination in natural light due to the high photothermal efficiency of MXene. In addition, the cytotoxicity result demonstrated that the MXene-modified resin did not cause severe damage to normal cells. This novel MXene/resin nanocomposite could pave the way for new designs for high-performance, multifunctional nanocomposites to effectively protect dental health in daily life.
研究领域:
牙科材料
·
纳米材料科学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Hongwei Wang,Fang Wu,Zhiheng Wang,Yang Wang,Shufang Zhang,Haijun Luo,Zhiqin Zheng,Liang Fang
Chromium (VI) removal is crucial to the safety of water resources, but there is still a lack of effective and fast dislodge methods, especially the on-site rapid remediation and emergency removal technology . Herein, the monolayer (ML) Ti 3 C 2 T x nanosheets (NSs) were prepared to remove Cr (VI) from water. The solution sample of the two-dimensional (2D) Ti 3 C 2 T x NSs demonstrate ultrafast adsorption kinetics (the concentration decreasing from 300 to 3 mg L −1 in 10 min) and impressively high capacity (1483 mg g −1 ), which is several times higher than that of the most reported Cr (VI) adsorption by Ti 3 C 2 T x . The analysis of the adsorption kinetics and isotherm models indicates that the adsorption reaction is endothermic, with physical and chemical adsorption coexisting (mainly monolayer chemical adsorption). The joint study of the experimental analysis and theoretical calculation based on the density functional theory (DFT) demonstrates that the extraordinary removal performance of Cr (VI) is due to the synergetic effect of reduction reaction removal and electrostatic adsorption. It is found that the Cr (VI) is mainly reduced by the OH- terminals on Ti 3 C 2 , and the detoxified Cr (III) is anchored on the surface of Ti 3 C 2 T x through complexation reaction with O terminal. The advantages of ultrafast adsorption kinetics and extra-high adsorption capacity of the single-layered Ti 3 C 2 T x for Cr (VI) removal make it a remarkable candidate for rapid and urgent removal of Cr (VI) wastewater.
研究领域:
环境科学
·
材料科学
·
化学工程
·
水处理
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2021
·
IF 7.664
Min Sang,Shuai Liu,Wenwen Li,Sheng Wang,Jun Li,Ji Li,Shouhu Xuan,Xinglong Gong
Recently, multifunctional materials have attracted tremendous attention in intelligent equipment and human–computer interaction, requiring the integration of electrical conductivity, sensing property and heating management. Herein, conductive MXene is formulated and deposited on the PVDF film surface and followed by integrating PI tape to construct a multifunctional PVDF/MXene/PI wearable electronic. The PVDF/MXene/PI with sandwich structure shows ideal mechanical strength and tensile toughness. Based on the conductive MXene network, PVDF/MXene/PI composite possesses excellent mechanosensation ability, which can sensitively monitor different human movements. Besides, PVDF/MXene/PI composite presents prominent Joule heating capability and achieves a temperature of over 80 ℃ at 6.5 V voltage. Insulated high-temperature resistant PVDF and PI tape as protective layers ensure the stability and safety of PVDF/MXene/PI heater. Moreover, PVDF/MXene/PI composite exhibits outstanding electromagnetic interference shielding effectiveness of 40 dB. Finally, PVDF/MXene/PI multifunctional electronic with fascinating multi-functions shows potential applications in human thermotherapy, human–machine interaction and electromagnetic wave protection.
研究领域:
材料科学
·
生物医学工程
·
智能设备
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2020
·
IF 5.065
Ziyuan Zhou,Lei Li,Xiaoya Liu,Haoyong Lei,Wanjie Wang,Yanyu Yang,Jianfeng Wang,Yanxia Cao
Two-dimensional (2D) transition metal carbides and nitrides (MXenes) have spurred great attention in many applications due to their outstanding electronic or mechanical properties. The exfoliation into single and fewer layer nanosheets of MXene is a requisite step for performance study in many cases. Herein this study aims to propose a facile and convenient liquid phase exfoliation (LPE) method to fabricate fewer-layer MXene nanosheets in large scale. The Hansen solubility parameters (HSPs) and surface tension component ratio are estimated and further applied to detect a green low-boiling-point water/acetone cosolvent for the better exfoliation of MXene. It has been found that the exfoliation efficiency is improved efficiently by matching HSPs and surface tension component ratio of MXene to that of solvents. A high concentrated MXene dispersion up to 1.727 mg/ml in the optimum composition of the water/acetone mixture which is approximately 78 and 5 times higher than that in pure acetone and water, respectively. Detailed characterization of morphology and suspension stability of exfoliated MXene are implemented which exhibit that the high quality and more stable MXene nanosheets are obtained in the suitable cosolvent. In addition, the determined HSPs and surface tension component ratio of MXene here will make a contribution to finding other new efficient solvents for MXene conveniently in specific fields.
研究领域:
材料科学
·
纳米技术
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2022
·Vol. 57
·期 4
·2597-2609
·
IF 4.682
Zhai Wangyi,Cao Yuanming,Li Yifei,Zheng Min,Wang Zuoshan
The exploration of novel and multifunctional coatings through composite nanomaterials design is crucial for developing next-generation polyester fabrics. Herein, we report an efficient approach of self-assembling MoO 3– x QDs on MXene (Ti 3 C 2 T x ) to fabricate multifunctional polyester fabrics. In a typical preparation, MoO 3– x QDs with an average size of 5 nm were uniformly distributed on the surface of MXene nanoflakes upon UV light. Then, polyester fabrics were coated with MoO 3– x QDs/MXene by dipping. The results demonstrated that the coated fabric had a decreasing trend in the electrostatic half-period from more than 60 s (untreated fabric) to 0.15 s and had excellent washing fastness. In addition, a similar phenomenon was found in smoke suppression, with the coated fabric producing 36.16% less smoke. More importantly, the sterilization rate of the coated fabric had reached 99% to E. coli and S. aureus under sunlight owing to the strong response of MoO 3– x QDs/MXene. This work provides a novel and facile strategy to design multifunctional coatings.
研究领域:
材料科学
·
纺织工程
·
纳米技术
✓ 已验证
DOI
高影响因子
APPLIED CLAY SCIENCE
·
2021
·
IF 5.467
Guangyong Zeng,Ke Wei,Haiyan Zhang,Jun Zhang,Qingquan Lin,Xiaojie Cheng,Arijit Sengupta,Yu-Hsuan Chiao
The oily wastewater is one of the major waste streams generated due to industrialization. The membrane technology has prominent advantages in the field of oily wastewater treatment . In present investigation, halloysite nanotubes (Hal) and polydopamine (PDA) were utilized to synergistically modify MXene followed by the fabrication of a series of Hal@MXene-PDA two-dimensional (2D) composite membranes by vacuum filtration. Observing the morphology of the membrane and exploring the change in interlayer space by scanning electron microscope (SEM), atomic force microscope (AFM) and X-ray diffraction (XRD), it was confirmed that, the composite membrane was successfully modified. The results revealed that, the Hal@MXene-PDA composite membrane exhibits higher hydrophilicity compared to the virgin membrane. The pure water flux using the composite membrane was found to be 5036.2 L·m −2 ·h −1 ·bar −1 , and the rejections of petroleum ether and lubricating oil were evaluated as 99.8%. The modified membrane(M6) also shows good anti-fouling ability in the anti-fouling cycle test and hence can be considered as a potential candidate for oil-water separation.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2021
·
IF 7.46
Rongyang Liu,Li Jiang,Zizhen Yu,Xufeng Jing,Xiu Liang,Dan Wang,Bo Yang,Chengxing Lu,Wei Zhou,Shangzhong Jin
Recent years, two-dimensional transition metal carbonitrides, MXene, have emerged as SERS substrates due to their unique optical and electrical properties. In order to combine the advantages of metal nanoparticles and MXene for SERS substrates, this paper prepared an MXene (Ti 3 C 2 T x ) -Ag nanoparticles (NPs) hybrid biosensor through in-situ electrostatic self-assembly method, in which the citrate-coated Ag NPs are loaded on the negatively surface of Ti 3 C 2 T x flakes through positively charged PDDA polymer. The characterizations show that a large number of Ag NPs uniformly adsorb on both side of Ti 3 C 2 T x nanosheets. The prepared platform exhibits excellent SERS performance, long-term stability and good uniformity by detecting 4-MBA molecules. The electromagnetic field distribution was simulated to theoretically show the Raman enhancement mechanism of this platform. In order to explore the possible application of the sensor in clinical diagnosis and monitoring of biological environment, the platform was used for biomolecule detection. The detection limit of adenine molecules can be as low as 10 −8 M. For dopamine molecules with concentration ranging from 5 × 10 -6 M to 5 × 10 −8 M, the SERS results show a linear relationship between peak intensity and concentration of dopamine molecules. The biosensor was applied for serum detection. The results suggest that MXene-PDDA-Ag NPs hybrid platform could be used as a sensitive and uniform biosensor for label-free quantitative detection of bio-molecular based on SERS method, which could be applied in the field of biotechnology.
研究领域:
材料科学
·
生物技术
·
分析化学
✓ 已验证
DOI
高影响因子
FIBERS AND POLYMERS
·
2026
·
IF 3.1
Hu Shen,Xie Jinlin,Zhang Boxuan,Wang Weiye,Ran Xuqin,Yang Ming,Li Xinyu,Kobesy Osama,Wei Guoke,Qiu Hua,Gu Peng
The rapid development of smart wearable technology has driven innovation in the field of flexible strain sensors. Carbon nanotube (CNT) fibers have emerged as promising candidates for the fabrication of flexible strain sensors due to their exceptional flexibility, remarkably high specific surface area, outstanding mechanical properties, and excellent electrical conductivity. However, interstitial voids between CNT bundles constitute structural defects that impair both load-bearing capacity and electron transport efficiency. This limitation can be effectively mitigated by incorporating metal nanoparticles, which not only fill these voids but also enhance composite performance through their intrinsic low electrical resistance and exceptional chemical inertness. In this study, MXene was utilized as a reducing agent to directly reduce platinum particles from chloroplatinic acid and autonomously grow into the voids of carbon nanotube yarns without the need for additional reducing agents. This modification strategy resulted in substantial enhancements in both mechanical and electrical properties: The tensile strength of platinum-modified CNT yarns increased from 121.2 to 137.27 MPa (13.3% increase), while electrical conductivity demonstrated an 85.3% improvement from 6.18×10 4 S/m to 11.45×10 4 S/m. The prepared flexible and stretchable strain sensors exhibit a resistive change of 380%, a tensile strain range of 0–30%, a GF sensitivity of 23.8, a fast response time of 0.6 s, a recovery time of 0.8 s, and dynamic sensing stability under varying conditions. Significantly, the sensor enables multi-channel synchronous monitoring of biomechanical signals at major human joints, establishing a new design framework for CNT yarn-based elastic strain sensors.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）