COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2021
·
IF 4.539
Yinchun Hu,Hui Yang,Renhu Wang,Menglan Duan
MOF-5 was prepared by hydrothermal method and Ag@MOF-5 nanoplates were obtained to improve the antibacterial activity and dispersion of Ag nanoparticles . MOF-5 and Ag@MOF-5 were characterized by scanning electron microscope (SEM), high-resolution transmission electron microscope and energy spectrum (HR-TEM&EDS), X-ray diffraction (XRD), infrared spectrum (FTIR) and thermal gravimetric analysis (TGA). MOF-5 was flaky crystals accumulated and complexed to form cube-like crystalline particles with the size of 20–50 micrometers, and it was destroyed in the process of loading nano-silver particles. Ag@MOF-5 nanoplates were nanoscale sheets, and 3–5 nm Ag nanoparticles were uniformly dispersed and loaded on nanoplates of MOF-5. The content of silver nanoparticles reached 13 wt% of Ag@MOF-5 total weight. The results of antibacterial experiment indicated that antibacterial ability of MOF-5 was limited, while Ag@MOF-5 showed good antibacterial ability to Escherichia coli and Staphylococcus aureus.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Xiaoqi Lyu,Hong Li,Huaizhong Xiang,Yibing Mu,Na Ji,Xuebin Lu,Xiaolei Fan,Xin Gao
Microwave (MW)-assisted process intensification of catalytic conversion of saccharides is a promising route for energy efficient production of value-added chemicals and fuels. This work presents the development of the MW-responsive catalysts (i.e., the acid functionalized spherical carbon superstructure, SCS) for converting fructose to 5-HMF effectively and efficiently under MW irradiation. Under a mild MW condition (at 70 °C, atmospheric pressure), the SCS catalyst (with surface sulfonic and carboxylic acid groups) achieved fructose conversion of ~ 97.8% and selectivity to 5-HMF of ~ 90.6% after 5 min reaction time with good recyclability, being significantly higher than that obtained by the system under the conventional heating. Importantly, the MW-assisted system showed very high energy efficiency coefficient of 1.01 mmol kJ −1 L −1 compared to that (0.09 mmol kJ −1 L −1 ) of the conventional thermal catalysis. The mechanism of process intensification of the system developed may be attributed to the combination of the dipole polarization of the MW-responsive sulfonic groups and the selective heating of the MW-absorbing SCS support under the MW condition.
✓ 已验证
产品关联
DOI
高影响因子
Energy Technology
·
2017
·Vol. 5
·期 11
·2046-2054
·
IF 2.789
Zhongwei Wang,Hu Li,Chengjiang Fang,Wenfeng Zhao,Tingting Yang,Song Yang
A series of organic–inorganic acidic hybrids in uniform nanospheres were prepared by self-assembly of phosphotungstic acid (HPW) and pyridine (PY) or triethylamine (TEA) without using a template and surfactant. The prepared samples were characterized by XRD, TEM, FTIR, and N 2 adsorption–desorption isotherms, and their surface acidity was determined by titration. Particularly, PY-PW-1 showed a predominant catalytic performance in the near complete etherification of 5-hydromethylfurfural (HMF) to 5-ethoxymethylfurfural (EMF) with a high yield of 90 % at 80 °C in 24 h, which might be ascribed to its relatively high acidity and smaller particle size. This kinetic study elucidated the superior activity of PY-PW-1 in the HMF-to-EMF conversion. Fructose could also be directly converted to EMF in a moderate yield of 55 % at an elevated temperature of 120 °C by a cascade reaction process. In addition, PY-PW-1 could be reused five times with no evident loss of its catalytic activity. Importantly, the downstream product of EMF (i.e., ethyl levulinate) in an excellent yield of 93 % could also be achieved from HMF by further increasing the reaction temperature to 140 °C.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2019
·Vol. 24
·期 18
·3369
·
IF 3.06
Gongsen Chen,Juyuan Luo,Mengru Cai,Liuying Qin,Yibo Wang,Lili Gao,Pingqing Huang,Yingchao Yu,Yangming Ding,Xiaoxv Dong,Xingbin Yin,Jian Ni
Oridonin (ORI) is a natural active ingredient with strong anticancer activity. But its clinical use is restricted due to its poor water solubility, short half-life, and low bioavailability. The aim of this study is to utilize the metal organic framework material MOF-5 to load ORI in order to improve its release characteristics and bioavailability. Herein, MOF-5 was synthesized by the solvothermal method and direct addition method, and characterized by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectrometer (FTIR), Thermogravimetric Analysis (TG), Brunauer–Emmett–Teller (BET), and Dynamic Light Scattering (DLS), respectively. MOF-5 prepared by the optimal synthesis method was selected for drug-loading and in vitro release experiments. HepG2 cells were model cells. MTT assay, 4′,6-diamidino-2-phenylindole (DAPI) staining and Annexin V/PI assay were used to detect the biological safety of blank carriers and the anticancer activity of drug-loaded materials. The results showed that nano-MOF-5 prepared by the direct addition method had complete structure, uniform size and good biocompatibility, and was suitable as an ORI carrier. The drug loading of[email protected]was 52.86% ± 0.59%. The sustained release effect was reliable, and the cumulative release rate was about 87% in 60 h.[email protected]had significant cytotoxicity (IC50:22.99 μg/mL) and apoptosis effect on HepG2 cells.[email protected]is hopeful to become a new anticancer sustained release preparation. MOF-5 has significant potential as a drug carrier material.Keywords:MOF-5;Oridonin;Antitumor;HepG2 cells;sustained release
✓ 已验证
DOI
PubMed
高影响因子
Molecular Catalysis
·
2023
·
IF 4.6
Xuan Gao,Zhihui Li,Dongsheng Zhang,Baoquan Zhang,Yanji Wang
Efficient and safe conversion of 5-hydroxymethylfurfural (HMF) to 5-hydroxymethyl-2-furancarbonitrile (HMFC) with hydroxylamine zinc chloride salt (ZnCl 2 ·2NH 2 OH) obtained from a novel method was developed. Without a catalyst, free NH 2 OH could react with HMF to produce HMFC with a yield of 41% at 55 °C. ZnCl 2 was an appropriate catalyst that increased HMFC yield to 64%. However, the reaction has a potential explosion safety hazard and a low effective utilization rate of NH 2 OH due to the easy decomposition property of free NH 2 OH. To address these issues, ZnCl 2 ·2NH 2 OH was prepared to serve as a hydroxylamine stabilizer, catalyst, and nitrogen source in the synthesis of HMFC. Therefore, NH 2 OH could be slowly released to participate in the reaction, slowing the invalid decomposition and increasing the utilization rate of elemental N. Under optimal conditions of n(HMF): n(NH 2 OH) = 1:1.5, 100 °C for 20 min with acetonitrile as solvent, the yield of HMFC was 100%. A plausible reaction mechanism for HMFC synthesis was also proposed.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2022
·
IF 12.92
Jiang Zhang,Zijian Wang,Mugeng Chen,Yifeng Zhu,Yongmei Liu,Heyong He,Yong Cao,Xinhe Bao
Deoxygenative upgrading of 5-hydromethylfurfural (HMF) into valuable chemicals has attracted intensive research interest in recent years, with product selectivity control remaining an important topic. Herein, TiO 2 supported gold catalysts coated with a thin N-doped porous carbon (NPC) layer were developed via a polydopamine-coating-carbonization strategy and utilized for pathway-specific conversion of HMF into 5-methylfurfural (5-MF) with the use of renewable formic acid (FA) as the deoxygenation reagent. The as-fabricated Au/TiO 2 @NPC exhibited excellent catalytic performance with a high yield of 5-MF (>95%). The catalytic behavior of Au@NPC-based catalysts was shown to be correlated with the suitable combination of highly dispersed Au nanoparticles and favorable interfacial interactions in the Au@NPC core-shell hetero-nanoarchitectures, thereby facilitating the preferential esterification of HMF with FA and suppressing unproductive FA dehydrogenation , which promoted the selective formylation/decarboxylation of hydroxy-methyl group in HMF in a pathway-specific manner. The present NPC/metal interfacial engineering strategy may provide a potential guide for the rational design of advanced catalysts for a wide variety of heterogeneous catalysis processes in terms of the conversion of biomass source.
✓ 已验证
产品关联
DOI
高影响因子
Biomass Conversion and Biorefinery
·
2022
·Vol. 13
·期 18
·16887-16898
·
IF 4.05
Wang Fei,Lai Jinhua,Liu Zixuan,Wen Sha,Liu Xianxiang
Spinel copper–manganese oxide catalysts were prepared via the co-precipitation method to be used for the catalytic selective oxidation of 5-hydroxymethylfurfural (HMF) into 2,5-furandicarboxylic acid (FDCA). Morphological characterization revealed that the primary particles of the as-synthesized catalysts were irregular nanoparticles aggregated with each other. The effects of reaction conditions such as time, temperature, and the dosage of oxidant on the catalytic activity were investigated. The experimental results show that the CuMn 2 O 4 showed superior catalytic performance in HMF selective oxidation reaction. In the presence of acetonitrile and tert-butyl hydroperoxide as oxidant, the catalytic reaction can achieve complete conversion of HMF, and the FDCA selectivity reached to 96.4%. The catalyst exhibited good recyclability and recoverability in a three-run recycling test. Mechanism studies reveal that Mn 3+ has a significant influence on the catalytic oxidation and the synergistic interaction between Mn and Cu can facilitate the mobility of oxygen thus improving the catalytic activity. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Fengjiao Lai,Feng Yan,Pengju Wang,Shubin Wang,Shun Li,Zuotai Zhang
The design of stable heteropolyacid (HPA) catalysts with strong Brønsted acidity and mild Lewis acidity is crucial for the efficient conversion of renewable biomass to value-added chemicals. Firstly, a novel strategy was proposed to synthesize the Ce-based HPA of H 5 CeW 12 O 40 . Secondly, the H 5 CeW 12 O 40 was combined with ChCl to form a series of temperature-responsive HPA catalysts (Ch n H 5-n CeW 12 O 40 , n = 1–5), which allowed the catalysts to be applied as soluble catalysts at a temperature >80 °C and be easily separated as an insoluble catalyst at a temperature <80 °C. In the H 2 O/DMSO/MIBK biphasic system, one-pot production of 5-hydroxymethylfurfural (5-HMF) from cellulose was achieved with an excellent yield of 67.5% over ChH 4 CeW 12 O 40 catalysis at 140 °C for 6 h, and other carbohydrates were converted, including fructose (83.1%), glucose (74.2%), sucrose (75.8%), cellobiose (70.2%) and starch (68.7%). Such high efficiency was attributed to the homogeneous catalysis at high temperature, the strong Brønsted acidity of [H 5-n CeW 12 O 40 ] n− , and the appropriate Lewis acidity from Ce(III). Moreover, the temperature-responsive property and the high stability were beneficial for recycling without significant structural change and activity loss.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2019
·
IF 3.206
Mengling Lin,Yingjie Guo,Zhiyong Liang,Xuesong Zhao,Jianan Chen,Yilin Wang
Biothiols, generally including glutathione (GSH), cysteine (CySH), and homocysteine (HcySH), are important biomarkers and closely related to many diseases. In this work, a simple method for the spectrophotometric determination of the three biothiols was developed. The proposed method was based on the fact that Fe 3+ could oxidize 3, 3′, 5, 5′-tetramethylbenzidine (TMB) to oxidized TMB (ox-TMB) and induce a blue color solution corresponding to an absorption peak centered at 652 nm. However, the introduction of a biothiol compound could cause the reduction of ox-TMB which resulted in a blue color fading and a decrease of the absorbance. Based on this finding, we developed a method for the determination of biothiols with the help of UV–vis spectroscopy, and the influence of different factors including pH, temperature, and incubation time was studied when glutathione worked as an example. The detection limits for GSH, CySH, and HcySH were 1.04, 0.82, and 2.09 μM, respectively. More importantly, the suggested method was successfully applied for the determination of GSH in human serum samples with the recovery of 97%–112%. This method is simple, fast and without the use of complicated nanomaterials .
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 56
·32848-32853
·
IF 3.049
Yan Huang,Pilan Zhang,Hualei Hu,Danxin Hu,Jie Yang,Yexin Zhang,Chunlin Chen,Yong Yang,Jian Zhang,Lei Wang
A group of CuAPO-5 molecular sieves with trace Cu were successfully synthesized via an ionothermal method and used for fructose dehydration to 5-hydroxymethylfurfural (HMF) in [BMIM]Br ionic liquid. The 0.06-CuAPO-5 sample displayed excellent performance and a HMF yield of 93.8% was obtained, which could be ascribed to the balance between acid strength and mass transfer efficiency. This work demonstrates that the ionothermal synthesized CuAPO-5 molecular sieve was also a good candidate for the efficient production of HMF.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FUEL
·
2016
·
IF 3.611
Junmei Wang,Zehui Zhang,Shiwei Jin,Xizhou Shen
Catalytic conversion of carbohydrates into valuable chemical and liquid fuels has received considerable attention in recent years. In this study, sulfonic acid-functionalized ordered mesoporous carbon (OMC-SO 3 H) was prepared and well characterized by physical techniques such as TEM, nitrogen physisorption measurements and XRD. The as-prepared OMC-SO 3 H was then used for the acid-catalyzed conversion of fructose based carbohydrates into 5-hydroxylmethylfurfan (HMF) or 5-ethoxymethylfurfural (EMF). Due to the high surface area and high acidity, the OMC-SO 3 H catalyst showed a comparable catalytic performance as the homogeneous catalysts. The dehydration of fructose over the OMC-SO 3 H catalyst produced a high HMF yield of 89.4% in DMSO at 120 °C within 30 min. The one-pot transformation of fructose carbohydrates were also smoothly performed, affording EMF yields of 55.7%, 53.6% and 26.8% from fructose, iuline and sucrose after 24 h at 140 °C, respectively. Furthermore, the OMC-SO 3 H catalyst can be reused and no apparent loss of the activity was observed.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Dongsheng Jiang,Yuzhe Li,Chao Zhang,Ruifang Wang,Jinpeng Zhu,Wen Chen,Yusi Che,Jilin He
Bayan Obo tailings are rich in niobium and other valuable elements; however, the phase evolution of niobium-bearing slag within these tailings remains poorly understood. This knowledge gap significantly impedes comprehensive utilization of these strategic resources. In this study, a CaO-SiO 2 -Nb 2 O 5 -5%Na 2 O-5%Al 2 O 3 -3%CaF 2 slag system was investigated to examine the phase equilibrium types, compositional characteristics, and distributional evolution under varying w (CaO)/ w (SiO 2 ) ratios and w (Nb 2 O 5 ) contents, using high-temperature equilibrium experiments. Following a 24-hour high-temperature equilibrium treatment at 1473 K under an argon atmosphere, a range of compounds including 13CaO·8SiO 2 ·Nb 2 O 5 ·CaF 2 , 2CaO·4SiO 2 ·Na 2 O·Al 2 O 3 , CaO·Nb 2 O 5 ·NaF, 2CaO·Nb 2 O 5 , and CaO·SiO 2 were identified. An increase in Nb 2 O 5 content coupled with a reduction in the w (CaO)/ w (SiO 2 ) ratio favored the formation of CaO·Nb 2 O 5 ·NaF (pyrochlore phase) and 2CaO·Nb 2 O 5 . These two phases exhibited high Nb concentrations, with the CaO·Nb 2 O 5 ·NaF (pyrochlore) phase containing up to approximately 70% Nb. The optimal smelting conditions for niobium enrichment in the pyrochlore phase were identified within the range of w (CaO)/ w (SiO 2 ) = 0.74∼0.80 and w (Nb 2 O 5 ) = 13.61%∼16.11%.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）