MATERIALS RESEARCH BULLETIN
·
2022
·
IF 5.6
Lei Han,Xi Yuan,Zitong Wang,Jie Hua,Jin Wang,Jinju Zheng,Jialong Zhao
Mn-doped two-dimensional lead halide perovskites nanoplatelets (NPLs) possess promising application in solid state lighting. The Mn:L 2 [CsPbBr 3 ]PbBr 4 NPLs with corporation of Cd 2+ were prepared via a hot injection method. The photoluminescence (PL) properties the NPLs with different Mn/Pb/Cd molar ratio from 0.5/1/0 to 5/1/3 were investigated by steady-state and time-resolved PL spectroscopy, indicating that the doping efficiency of Mn 2+ can be boosted by adding Cd 2+ to the NPLs. After thermal annealing, the PL quantum yield of Mn 2+ ions reached up to 75%, which is Cd 2+ content dependent. The temperature-dependent PL spectra demonstrated that the thermal activation energies of the NPLs could be increased by incorporating Cd 2+ , meaning that the nonradiative defect/trap states were effectively suppressed. These experimental results suggested the PL properties of Mn:L 2 [CsPbBr 3 ]PbBr 4 NPLs were optimized by adding Cd 2+ ions.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING & TECHNOLOGY
·
2015
·Vol. 38
·期 2
·291-296
·
IF 2.442
Chen Zhou,Yexin Zhang,Lingjun Hu,Hongfeng Yin,Wei Guo Wang
Mn-doped La 0.8 Sr 0.2 CoO 3 perovskite oxides (La 0.8 Sr 0.2 Co 1– x Mn x O 3 ; x = 0, 0.1, 0.3, 0.5) were synthesized by a modified sol-gel method. The phase-pure oxides were obtained. CoO and carbonates were formed on the surface of La 0.8 Sr 0.2 CoO 3 . With increasing doping content, these impurities were reduced while the stability of the perovskite structure was improved. The valence state of B-site ions and the amount of absorbed oxygen were influenced by Mn doping. The catalytic activity of the perovskite catalysts was investigated for CO oxidation and simultaneous removal of CO, C 3 H 8 , and NO. For CO and NO removal, La 0.8 Sr 0.2 Co 0.9 Mn 0.1 O 3 exhibited the best performance. For C 3 H 8 removal, the reactivity was promoted linearly with the doping content. The structure-activity relationship is also discussed.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Yihao Liu,Nian Ran,Riyue Ge,Jianjun Liu,Wenxian Li,Yingying Chen,Lingyan Feng,Renchao Che
Transition metal phosphides (TMP) show great potential to alternative noble metal based electrocatalysts for oxygen evolution reaction (OER) electrolysis but the still unsatisfactory catalytic activity hinders its practical application. Therefore, it is of much significance to rationally design TMP electrocatalysts for achieving high-efficiency OER. Here, we design Mn-doped cobalt phosphide (Mn-CoP) porous nanosheets for highly active OER through the in-situ metal acetate hydroxide transformation and subsequent phosphidation treatment. Benefiting from synergistic effects of the porous structure, high density of active sites and improved charge-transfer capability, the optimized Mn-CoP serving as a pre-catalyst shows an impressive alkaline OER performance with a low overpotential of 288 mV at the current density of 10 mA cm −2 and high stability. Post-electrolysis characterizations show the conversion from Mn-CoP to vertical Mn-CoOOH hexagonal nanosheets during OER, in which the transformed Mn-CoOOH not only provide extra active sites, but serve as the highly active species. Density functional theory (DFT) calculations reveal that Mn doping can increase the gap states near the Fermi level of active O sites, endowing facilitated deprotonation of OH* to O* and reducing the energy barrier of rate-determining step. This protocol provides a novel insight for the construction of highly efficient TMP water oxidation electrocatalysts.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Jinyan Cao,Jianjun Li,Wei Chu,Wanglai Cen
Manganese-doped bismuth oxychloride (Mn-BiOCl) photocatalysts were facilely synthesized for the photodegradation of metronidazole (MTZ), and the as-prepared Mn-BiOCl was systematically characterized. The results show that the introduction of Mn 2+ to BiOCl increases its MTZ removal efficiency through increasing its specific surface area, broadening its light absorption region, and facilitating photoinduced carrier separation. The enhancement of the optical properties is ascribed to the generation of an intermediate Mn 3p-O 2d energy level in the forbidden gap of Mn-BiOCl based on the density functional theory calculations. Mn-BiOCl also exhibited favorable stability and recyclability after four cycles. Moreover, the results of the quenching experiments indicate that superoxide radicals (O 2 − ), hydroxyl radicals (OH ) and holes ( h + ) participated in MTZ degradation over Mn-BiOCl, and the electron spin resonance (ESR) test demonstrated that more OH was generated in the Mn-BiOCl process than the BiOCl process. This was explained by the H 2 O adsorption energy and bond parameter on the photocatalyst’s surface. Finally, the photodegradation pathway of MTZ was elaborated based on the intermediate analysis, and a mechanism for the promotion of MTZ photodegradation through Mn-doping BiOCl was proposed.
✓ 已验证
DOI
高影响因子
Energy Material Advances
·
2022
·
IF 0
Renjie He,Sheng Lei,Mengchuang Liu,Mingsheng Qin,Wei Zhong,Shijie Cheng,Jia Xie
Microspinel LiMn2O4 (LMO) is a widely used cathode material in power lithium-ion batteries. However, inevitable Mn dissolution and dynamic phase instability will cause the degradation of microspinel LMO during cycling. Here, a low-tortuosity LMO (LMO-LT) electrode is fabricated by an ice-templating method, which exhibits enhanced dynamic phase stability, alleviated Mn dissolution, and rare particle microcracks during cycling. It is shown that the low-tortuosity electrode enables fast lithium-ion diffusion and thus small concentration polarization, leading to uniform electrochemical reaction within microregions of the LMO-LT electrode. Furthermore, the fast lithium-ion transport kinetics and even mesoscopic scale reactions of the LMO-LT electrode effectively alleviate irreversible phase transition and Mn dissolution as well as suppress crack generation in LMO particles. As a result, the full cell [negative-to-positive capacity ratio (N/P) = 1.1] with thick LMO-LT cathode (13 mg cm−2) and Li4Ti5O12 anode sustains 80.0% capacity over 200 cycles. The LMO-LT electrode further delivers 78.9% capacity of that at 0.1 C at the high rate of 5 C. This work provides an important strategy to enhance dynamic phase stability and suppress Mn dissolution at the mesoscopic scale, promoting the development of high-performance LMO electrodes.
✓ 已验证
DOI
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Shengfeng Yang,Qingchao Xiao,Bin Li,Tao Zhou,Qihong Cen,Zewei Liu,Yue Zhou
Heavy metal contamination, particularly by lead and cadmium, poses a significant environmental challenge. Indiscriminate disposal of crop residues exacerbates environmental concerns. In this study, broad bean straw was utilized to produce biochar (BC), and further modifications were made using FeCl 3 -6 H 2 O and KMnO 4 to obtain Iron-Manganese Modified Biochar (FMBC) for remediating cadmium and lead-contaminated soil. Results show that both BC and FMBC increased soil pH, available phosphorus, and potassium compared to the control groups. Adding 5 % BC led to a notable reduction of 60.98 % in available cadmium and 51.63 % in available lead. Simultaneously, FMBC decreased active cadmium and lead by 57.51–73.73 % and 52.25–69.87 %, respectively. Furthermore, FMBC decreased the content of cadmium and lead in the unstable state while increasing content in the residual state, demonstrating its ability to reduce accumulation in plant tissues. FMBC adsorption mechanisms primarily involve surface complexation and co-precipitation, where oxygen-containing functional groups form stable complexes with free cadmium and lead ions. In conclusion, FMBC proved to be an effective, environmentally friendly soil remediation agent with strong adsorption capabilities and a prolonged shelf-life. This provides a promising solution to alleviate the pollution of heavy metals such as cadmium and lead in soil.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Zhongjun Zhao,Yiran Sun,Yihao Pan,Jing Liu,Jingkai Zhou,Mei Ma,Xiaozhong Wu,Xiangyan Shen,Jin Zhou,Pengfei Zhou
Layered Mn-based cathode (K x MnO 2 ) has attracted wide attention for potassium ion batteries (PIBs) because of its high specific capacity and energy density. However, the structure and capacity of K x MnO 2 cathode are constantly degraded during the cycling due to the strong Jahn-Teller effect of Mn 3+ and huge ionic radius of K + . In this work, lithium ion and interlayer water were introduced into Mn layer and K layer in order to suppress the Jahn-Teller effect and expand interlayer spacing, respectively, thus obtaining new types of K 0.4 Mn 1-x Li x O 2 ·0.33H 2 O cathode materials. The interlayer spacing of the K 0.4 MnO 2 increased from 6.34 to 6.93 Å after the interlayer water insertion. X-ray photoelectron spectroscopy studies demonstrated that proper lithium doping can effectively control the ratio of Mn 3+ /Mn 4+ and inhibit the Jahn-Teller effect. In-situ X-ray diffraction exhibited that lithium doping can inhibit the irreversible phase transition and improve the structural stability of materials during cycling. As a result, the optimal K 0.4 Mn 0.9 Li 0.1 O 2 ·0.33H 2 O not only delivered a higher capacity retention of 84.04 % compared to the value of 28.09 % for K 0.4 MnO 2 ·0.33H 2 O, but also maintained a greatly enhanced rate capability. This study provides a new opportunity for designing layered manganese-based cathode materials with high performance for PIBs.
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2021
·
IF 7.086
Jingyu Ren,Yanzhong Zhen,Jian Wang,Jie Li
In this study, caffeic acid (CA) was degraded by electrical discharge plasma combined with Mn doped CoOOH catalyst. Doping of Mn significantly improve the catalytic activity of CoOOH. CA degradation efficiency was 75.6% with dielectric barrier discharge treatment for 10 min, and it reached 97% using CoOOH as the catalyst at the same treatment time. CA was 100% degraded with only 8 min using Mn/CoOOH as the catalyst. The introduction of Mn into the lattice of CoOOH induced the formation of oxygen vacancy , causing part of coordinate number of Co decreased from 6 to 5, and thus produces unsaturated Co to be the Lewis acid sites. Lewis acid sites (unsaturated Co) could coordinate with O 3 and H 2 O 2 and break their chemical bonds to form O and –OH. Assisting in the conversion of O 3 to ·OH was the main role of H 2 O 2 in the catalytic process. The degradation products and pathway of CA were studied by three-dimensional fluorescence, liquid chromatograph-mass spectrometer and density functional theory calculations.
✓ 已验证
DOI
高影响因子
Journal of Superconductivity and Novel Magnetism
·
2024
·Vol. 37
·期 4
·667-675
·
IF 1.6
Wu Diandian,Liu Xiansong,Han Yuyan,Feng Shuangjiu,Lv Qingrong
A sample of Y 2.85 Ca 0.15 Sn 0.08 Ti 0.05 Mn 0.07 Fe 4.8 O 12 doped with four different ions was prepared using the solid method and a subsequent procedure. X-ray diffraction (XRD), energy-dispersive X-ray (EDX), and scanning electron microscope (SEM) were used to analyze the sample’s structural features, elemental distribution, and surface morphology. The study used the B-H magnetic characteristic analyzer and superconducting quantum interferometer magnetic performance measurement system to analyze the magnetic properties of Y 2.85 Ca 0.15 Sn 0.08 Ti 0.05 Mn 0.07 Fe 4.8 O 12 . The correlation becomes more surprising as the frequency increases, indicating a decrease in permeability when the magnetic field H reaches 200 A/m. Ion substitution leads to changes in magnetic crystal anisotropy, affecting permeability as the external magnetic field strength increases. We analyze the correlation between saturation magnetization and temperature in the 520–540 K range and explain the variation of saturation magnetization with temperature. The study shows that saturation magnetization decreases as temperature increases. This result suggests that saturation magnetization decreases as temperature increases. The increased super-exchange effect due to Ti and Mn occupying the (d) sites is much stronger than the reduced effect caused by Sn occupying the (a) sites. Therefore, the saturation magnetization of the Y 2.85 Ca 0.15 Sn 0.08 Ti 0.05 Mn 0.07 Fe 4.8 O 12 sample is higher than that of the undoped sample. The Curie temperature (Tc) of the Y 2.85 Ca 0.15 Sn 0.08 Ti 0.05 Mn 0.07 Fe 4.8 O 12 sample is lower than that of the undoped sample.
✓ 已验证
DOI
高影响因子
IONICS
·
2024
·Vol. 30
·期 4
·2287-2298
·
IF 2.4
Lin Jie,Ding Yihong,Jin Huile,Zeng Tianbiao
The development of inexpensive, highly effective and durable electrocatalysts for hydrogen production via water electrolysis is of paramount importance. Transition metal oxides, owing to their simplicity in preparation and cost-effectiveness, have been widely investigated, particularly cobalt, nickel, and manganese oxides. Inspired by the synergies of the ternary cathode materials of lithium-ion batteries (LiNi x Mn y Co 1- x - y O 2 , NMC), a simple and feasible method was used to prepare a graphite plate as the support, and Ni and Mn were co-doped with Co 3 O 4 as an efficient water decomposition catalyst. Experimental studies indicated that the 10% Ni and 10% Mn co-doped Co 3 O 4 (Co 2.4 Ni 0.3 Mn 0.3 O 4 , CNM-811) exhibited the lowest overpotential in the oxygen evolution reaction (OER), with CNM-811 achieving an overpotential of 338 mV at 30 mA cm −2 in NaOH aqueous solution, the Tafel slope is 79.71 mV dec −1 . In the hydrogen evolution reaction (HER), an overpotential of 190 mV was attained at 10 mA cm −2 . In overall water splitting, a cell voltage of 2.048 V was achieved at 100 mA cm −2 , which was superior to many analogous catalysts reported today.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Yuyao Zhang,Tianyi Gao,Jiameng Yu,Yining Zhang,Yue Zhang,Shaojie Chen,Ning Xue,Xinshui Zhang,Qiong Yuan,Luyao Wang,Wei Liu
As a promising solid electrolyte, the NASICON-type Na3Zr2Si2PO12 holds excellent application in solid-state sodium-ion batteries, which are an alternative to lithium batteries. However, its insufficient conductivity is one of the key factors impeding its applications. Herein, we report Mn2+-doped Na3Zr2Si2PO12, demonstrating enhanced ionic conductivity and electrochemical properties. We systematically investigate the effect of doping content on the ionic conductivity. The results show that Na3.4Zr1.8Mn0.2Si2PO12 has an extremely high room-temperature ionic conductivity of 3.3 mS cm–1, which is 4 times that of undoped Na3Zr2Si2PO12. According to the Meyer–Nedle rule, it can be known that as the activation energy decreases, the ionic conductivity shows a gradually increasing trend. Additionally, the Na symmetric batteries using Mn2+-doped Na3Zr2Si2PO12 exhibit improved cycling performance. The quasi-solid-state sodium–metal battery using Na3V2(PO4)3 achieves a high discharge specific capacity of 91.3 mAh g–1 at 0.1C, with a high capacity retention of 92.2% after 260 cycles, far surpassing the counterpart based on undoped Na3Zr2Si2PO12. This work provides an effective strategy for enhancing the performance of Na3Zr2Si2PO12 for its application in sodium–metal batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DIAMOND AND RELATED MATERIALS
·
2024
·
IF 4.3
Shiyuan Zhu,Peng Liu,Qiongyu Zhou,Qianjun Deng,Yuanyuan Li,Jiacheng Wang,Zuo He,Changchun Tian,Xiaofen Wang
Zn coating is a typical anti-corrosion coating for carbon steel. Considering the sacrificial nature of Zn coating, it is essential to enhance the corrosion resistance for the long-term performance in the practical application. In this work, two-dimensional carbon nanoplatelets (2D-CNs) with nanometer thickness (∼100 nm) and ultra-large lateral size (10–40 μm) and Mn element have been successfully co-deposited with Zn onto low carbon steel by a simple electrodeposition method. Results show that the Zn-Mn/2D-CNs composite coating is composed of Zn phase, ZnMn 3 phase and a small number of 2D-CNs. The Zn-Mn/2D-CNs composite coating exhibits a modified surface quality with ultrafine grains and smaller roughness (Ra = 176 nm, Rq = 131 nm) when compared with that of Zn coatings (Ra = 798 nm, Rq = 684 nm). Besides, the inert 2D-CNs within the composite coating can act as the corrosion barriers. Therefore, the Zn-Mn/2D-CNs composite coating has excellent anti-corrosion performance, owning the lowest corrosion current densities i corr (9.2 μA cm −2 ) and maximum coating resistance R coat (1.2 kΩ·cm −2 ) and charge transfer resistance R ct (3.5 kΩ·cm −2 ), associated with its modified microstructure, Mn element with passivation property, and 2D-CNs barriers. These results demonstrate the desirable potentiality of inert 2D carbon materials in the electrodeposition of Zn-based coating for improving the corrosion resistance.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）