Nano-Micro Letters
·
2019
·Vol. 11
·期 1
·1-14
·
IF 9.043
Luo Linqu,Song Jianjun,Song Longfei,Zhang Hongchao,Bi Yicheng,Liu Lei,Yin Longwei,Wang Fengyun,Wang Guoxiu
3D hierarchical conductive Sn quantum dots encapsulated in N,S co-doped carbon nanofibers sheathed within rGO scrolls (Sn/NS-CNFs@rGO) were prepared through an electrospinning process.
Flexible Sn/NS-CNFs@rGO electrode exhibits superior long-term cycling stability and high-rate capability in sodium-ion batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2018
·
IF 4.229
Zhaomin Wang,Lu Yu,Limin Chang,Limin Wang,Yong Cheng
Owing to its high capacity of 994 mAh g −1 , low cost, and environmental friendliness , tin (Sn) is considered as an advanced anode material for high-capacity lithium-ion batteries (LIBs). Here, a facile strategy to fabricate core-shell structured Sn@NC composites with one-step and large-scale production is introduced in a liquid-phase reaction under room temperature . When used as anode materials for LIBs, the optimal Sn@NC composite delivers a high reversible discharge capacity of 761.2 and 476 mAh g −1 at a current density of 200 and 1000 mA g −1 after 200 cycles, respectively. A high capacity of 328.3 mAh g −1 can also be obtained even at a current density of 2000 mA g −1 . The excellent cycling stability and rate performance of the composite can be ascribed to the synergistic effect of the nanometer size of Sn powder and porous structure of the carbon shell, both of which can effectively reduce the absolute volume change of electrode during the repeated charge-discharge cycles, and thus lead to excellent electrochemical performances at both rate capability and cycling life.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2018
·
IF 4.908
Wenzhi Li,Mingxue Su,Tingwei Zhang,Qiaozhi Ma,Wei Fan
Liquid fuel intermediates can be produced via aldol condensation reactions between furfural and acetone. It was found that potassium-promoted Lewis acid zeolite Sn-MFI performed superior catalytic performance for C C bond coupling by aldol condensation reactions of furfural with acetone. The presence of K in Sn-MFI catalyst improves the catalytic activity of the catalyst likely due to increased basicity. The product distribution of aldol condensation was also changed remarkably with the addition of K. Besides 4-(2-furyl)-3-buten-2-one (FAc), 1, 5-di-2-furanyl-1, 4-pentadien-3-one (F 2 Ac) was also formed in the existence of K compared with pure Sn-MFI. It was also found that the K-promoted Sn-MFI catalyst is more resistant to water and exhibits enhanced selectivity to F 2 Ac.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2023
·
IF 13.6
Ruixia Li,Minghui Shang,Taotao Zhe,Mingyan Li,Feier Bai,Zhihao Xu,Tong Bu,Fan Li,Li Wang
Developing electrode materials with excellent electrocatalytic properties for detecting pesticide residues plays a vital role in the safety of agricultural products and environmental applications. Herein, we designed a new electrochemical sensor on the basis of N-doped carbon hollow nanospheres modified with Sn/MoC Schottky junction (Sn/MoC@NC) for methyl parathion (MP) detection. The Sn/MoC@NC was prepared by self-assembled polymerization-anchoring strategy and high-temperature carbonization design. Sn/MoC Schottky junction and hollow nanosphere structure endow Sn/MoC@NC with a larger surface area, more active sites, and faster electron transfer , which is beneficial to enhancing its electrocatalytic performance. The structural characterizations and physicochemical properties of Sn/MoC@NC were explored through various microscopy, spectroscopic and electrochemical techniques. The experimental results confirmed that the calibration curve for current and MP concentration (0.05–10 μg/mL) was available under optimized conditions, and the sensitivity and detection limit were respectively determined to be 9.02 μA μM 1 cm 2 and 8.9 ng/mL. Furthermore, the constructed sensor displayed excellent selectivity , repeatability, and stability, which qualified it for use in detecting MP in grapes and tap water with satisfactory recovery. This work may provide some interesting prospects for constructing high-performance electrocatalysts for MP detection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Electronic Materials
·
2023
·
IF 4.7
Ge Cao,Yonghao Chen,Chengwei Jiang,Jiatong Xu,Wei Xue,He Zhang,Yanqing Tian
Tin (Sn) metallic material is one of the best-known metals and has been extensively studied due to its ease of processing, low melting point, and low cost. However, it is still challenging to synthesize high-processing performance and antioxidant Sn nanoparticles with tunable sizes. This research reported a facile, easy-to-scale-up polyol-mediated synthesis of Sn nanoparticles assisted by sodium citrates as a capping agent. The presence of citrate capping facilitated uniform nucleation of Sn nanoparticles and enhanced their antioxidant capacity and dispersion properties. These nanoparticles can remain stable against oxidation for more than 270 days in an ambient atmosphere, even under continuous heating at 200 °C for over 12 h. The citrate capping also inhibits interparticle agglomeration and allows the preparation of high-quality suspensions in water and many conventional organics. Moreover, efficient size tuning over a wide range (60 nm–1 μm) can be achieved simply by changing the Sn2+ precursor concentrations. The above-mentioned antioxidant capacity and processability allow them to combine with silver flakes in thermosetting epoxy resin as complementary conductive fillers effectively, creating conductive pathways among the silver flakes to obtain high-performance electrically conductive adhesives (ECAs). By adding Sn nanoparticles as complementary conductive fillers, the resistivity of the ECAs can be reduced to 1/6000 of that of the ECAs filled with only the same mass ratio of silver flakes, exhibiting its great potential in future electronics.
✓ 已验证
产品关联
DOI
高影响因子
SOLAR ENERGY MATERIALS AND SOLAR CELLS
·
2022
·
IF 7.305
Jiahui Lu,Nan Sheng,Chunyu Zhu
Phase change materials (PCMs) using metals/alloys have been concerned for medium temperature solar thermal storage and waste heat recovery. However, the PCMs may leak due to the solid-liquid phase change, which greatly limits the use of metallic PCMs. In this study, we report the synthesis of microencapsulated PCMs (MEPCMs) using metallic Sn as PCM core and a sol-gel coated SiO 2 as shell. The as-coated microcapsules are further undergone a high temperature heat treatment at oxygen/nitrogen atmosphere. Due to the self-repairing effect, the cracked microcapsules can be sealed and stabilized, thereby forming high stabilized MEPCMs over 100 cycles. The melting point and latent heat of the Sn@SiO 2 –O 2 microcapsules were around 233 °C and 56 J g -1 respectively, while the values were around 233 °C and 58 J g -1 for Sn@SiO 2 –N 2 microcapsules, similar to the theoretical values of metallic Sn. The successfully prepared Sn@SiO 2 MEPCMs could find wide applications in medium temperature thermal energy storage .
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Weiping Liao,Haoyi Lin,Jiaxing Zhang,Jiaqi Wang,Kaixuan Yang,Ting Su,Hongying Lü,Zhiguo Zhu
2,5-Furandicarboxylic acid (FDCA) is a potential substitute of petroleum-based terephthalic acid to manufacture polymer. The selective aerobic oxidation of renewable 5-hydroxymethylfurfural (HMF) to FDCA is a promising and appealing route for establishing sustainable and environmentally friendly chemical process. Au catalysts have exhibited exceptional catalytic performances for this highly anticipated chemical transformation, where the used support intensively impacts the catalytic productivity from the standpoint of metal-support and guest organic-support interactions. Herein, Sn-Beta zeolite was straightforward and rapidly synthesized via structural reconstruction without the auxiliary of any solvents, which was adopted as support for Au catalyst to construct bifunctional catalysts. As for Au/Sn-Beta sample, Lewis acid sites were related to Sn 4+ ions in the zeolite framework, while electronic properties and particle size of Au species were capable of being modulated by Au dosages. In addition, charge transfer from Au species to framework Sn 4+ ions resulted in the formation of Au δ+ species. Au/Sn-Beta catalyst with metal-Lewis acid cooperative active sites showed unique catalytic productivity of FDCA product in the aerobic oxidation of HMF to FDCA, whose catalytic performance was correlated with Lewis acid amounts as well as geometric and electronic effect of Au particle. Reaction mechanism analysis revealed the pathway and concrete step that Lewis acid site functioned. The aim is to provide some guidance for constructing a task-specific multifunctional supported catalyst from the view of support-enhanced effect for the catalytic conversion of biomass resource with multi-functional-groups.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2022
·Vol. 169
·期 6
·060507
·
IF 4.386
Zining Man,Hao Tian,Xingbao Zhu,Yu Wang,Yuanguo Wu,Xiangyu Wen,Zhe Lü
The solid-state batteries have received widespread attention due to their excellent stability and safety, however, the low ionic conductivity and weak interface contact always restricted its performance. In this work, we propose an in situ thermally cross-linked and solidified polymer electrolyte with polyethylene glycol diacrylate (PEGDA) as scaffold in which succinonitrile (SN) and lithium bis-trifluoromethanesulfonimide (LiTFSI) were further introduced to improve the ionic conductivity. Herein, the composite gel was served as not only solid-solid interface material but also solid-state electrolyte. Different with conventional polymer gels, the solvent evaporation could not happen for this composite material during the solidification process, and therefore resulting in good interface contact without inside bubbles. We further present the investigation on transport principle of Li+ in the solid-state electrolyte and the effect of molecular chain on ionic conductivity. The conductivity of the solid-state electrolyte can reach 1.76 × 10−4 S cm−1 at room temperature without any assistance of liquid electrolytes, which is attributed to the short molecular chain of PEGDA. Electrochemical window of the solid-state electrolyte can reach 5.2 V after cross-linking treatment. And the lithium-oxygen battery using this solid-state electrolyte can stably cycle for more than 1100 cycles with a current density of 200 mA g−1 and a limit capacity of 200 mAh g−1 at room temperature.
✓ 已验证
产品关联
DOI
高影响因子
Frontiers in Chemistry
·
2022
·
IF 5.545
Qian Ningkang,Ji Liang,Li Xiao,Huang Jingbo,Li Junjie,Wu Xingqiao,Yang Deren,Zhang Hui
Combining the core-shell structure with the optimization of surface composition and structure in the shell is a fantastic strategy to enhance the electrocatalytic performances. Here, we synthesized trimetallic Au@PtxSny core-shell nanoparticles (NPs) with tunable composition and structure of Pt-Sn alloyed shells. Impressively, the Au@PtSn core-shell NPs with hexagonal PtSn alloyed shells exhibited the highest mass activity and specific activity toward ethanol oxidation reaction (EOR) in alkaline electrolyte, which are 13.0 and 12.7 times higher than those of the commercial Pt/C. In addition, the Au@PtSn core-shell NPs displayed the best stability compared to commercial Pt/C, with only 44.8% loss vs. 86.8% loss in mass activity after 1,000 s due to the stronger anti-poisoning ability for reaction intermediates. The theory calculations reveal that the introduction of Au core and alloying Pt with Sn both endow Pt with an appropriate d-band center, and thus effectively boosting the EOR activity.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2022
·Vol. 169
·期 8
·082501
·
IF 4.386
Yinghai Zhao,Xiandong Yin,Pengjie Shen,Ning Li,Yanling Xu
In this work, the tinplate with 0.5 g·m−2 tin coating mass was prepared in order to improve the economic benefit for food packaging field. We studied this low Sn-coated steel surface state and developed a process combined Mo-Mn-Al-P coating based on its special structure. By Taguchi techniques optimization, this chromium-free multi-elements coating has excellent corrosion resistance and adhesion with organic coatings, would be a hopefully replacing traditional chromate passivation treatment on tinplate with low tin coating mass.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2021
·
IF 4.821
Yuxuan Qin,Chen Hang,Liping Huang,Haiyun Cheng,Junqing Hu,Wenyao Li,Jianghong Wu
In this study, Sn@C composite was fabricated from ZnSn(OH) 6 through a green thermal calcination method. For the first time, this composite was used as a modifier on glassy carbon electrode (GCE) to construct an electrochemical biosensor to detect acetaminophen (AC). The Sn@C sensor exhibited distinctly enhanced performance in electrochemical response to AC compared with bare GCE, GCE modified with Sn and GCE modified with graphene. The linear range is 0.2–100 μM and the limit of detection (LOD) is 0.020 μM based on DPV analysis. The excellent electrochemical behavior can be ascribed to the outstanding conductivity of metal Sn and carbon, and the strong adsorption of the carbon layer to AC. Most importantly, the chemical interaction between Sn and C through Sn-C bond facilitated the electron transfer process in the electrooxidation of AC. Finally, the Sn@C sensor was successfully applied in pharmaceutical samples and spiked serum samples to detect AC with satisfactory recoveries.
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2021
·
IF 7.086
Linfeng Zhang,Xianghui Wu,Jianding Li
To deal with the environmental pollution and energy crises, it is indispensable to find green and efficient means to overcome these challenges. Herein, the Sn-doped BiOI modified multi-shelled ZnO heterojunction composite with a high performance are designed and prepared. The results prove the formation of heterojunction structure in the composites and the morphology is shown as the multi-shelled microsphere. The performances of the composites are evaluated by different kinds of antibiotic degradation and H 2 -evolution under simulation sunlight irradiation. The measurements present that the Sn -BiOI/ZnO (SBZs) could completely remove ciprofloxacin (CIP) within 100 min, which is 4.18 times that of ZnO in kinetics. Typically, the degradation rate of CIP for SBZ6 is over 99.9%, which is more than 25% higher than that of pure ZnO microspheres. In addition, the rate of H 2 production could reach 3.08 mmol g −1 ∙ h −1 , which is 1.79 times of the pure ZnO microspheres. The boosted performance of the composites may originate from the enhanced electronic transmission efficiency and improved separation and recombination efficiency of electrons/holes. The charge transfer mode in the SBZs heterojunction composites is proposed and verified as the Z-scheme by the active species experimental and the possible electron transfer path analysis. Therefore, Sn -doped BiOI is introduced into multi-shelled ZnO microsphere to form contact heterojunction interfacial, which greatly improves the photocatalytic performances of the SBZs. Furthermore, this work supplies a strategy for designing and preparing highly active ZnO-based heterojunction composites, which could effectively address the challenges of environmental remediation and clean energy production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）