CARBON
·
2023
·
IF 10.9
Jie Li,Jie Sheng,Ziyue Yang,Zhaoyuan Liu,Yunzhong Wu,Changsheng Xing,Jiaxu Shuang,Bin Liu,Tong Zhang,Zhaoyu Chen,Lidong Wang,Weidong Fei
Graphene is the strongest material ever identified. However, the fabrication of graphene-based bulk materials from graphene powders presents a significant challenge. Here, a new strategy to fabricate high performance graphene based bulk materials by introducing silicon nanoparticle is proposed. Consequently, ultra-high compressive strength and high flexural strength are achieved, measuring as high as 1102 MPa and 455 MPa, respectively. The compressive strength at the microscale even reaches a remarkable 5.17 GPa. The superior strength of the bulk material is primarily attributed to the Y-type carbon structure and Si-C bonds. The Y-type carbon structures in graphene, produced by the self-propagating high-temperature synthesis (SHS) method, and the Si-C covalent bonds formed at the interface between graphene and SiC contribute to a tight linkage of graphene sheets , thereby preventing slippage of graphene sheets. In addition, the microstructure evolution process of Si-SHS-graphene bulk material is clarified. With the introduction of silicon nanoparticles, the oxidation resistance of graphene based bulk materials is substantially improved, the weight loss is around 6% after oxidized at 1000 °C. This study carries extensive implications for understanding the impact of Y-type carbon structures and the effect of Si-C bonds in graphene-based bulk materials.
✓ 已验证
DOI
高影响因子
Medicinal Chemistry
·
2017
·Vol. 13
·期 8
·753-760
·
IF 2.331
Guo Ping,Xie Zixin,Zhang Huan,Zhang Zaikui,Han Chao,Cheng Donghua,Lin Dan,Zhang Yuan,Wang Xuebao,Guo Xin,Ye Faqing
Background: Thienopyrimidinone is a newly designed, selective fibroblast growth factor receptor 1 (FGFR1) inhibitor with an excellent anticancer effect. Objective: The goal of the present study was to design and synthesize better FGFR1 inhibitors through modifications of the lead
compound thienopyrimidinone. Methods: In the present study, a series of C-2 substituted derivatives of thienopyrimidinone, namely L1-L16, were synthesized, and their inhibitory effects on FGFR1 were evaluated. The anti-proliferative activities of these compounds were assessed by MTT assay.
Results: Among the novel derivatives, L11 was found to exert remarkable FGFR1 inhibitory activity (79.93% at 10 μM) and anti-proliferative activity, with IC50 values of 2.1, 2.5, and 3.5 µM in the FGFR1-overexpressing cell lines, H460, HT-1197, and B16F10, respectively.
Conclusion: Our newly synthesized thienopyrimidinone derivatives may be candidate FGFR1 inhibitors for future development as novel anticancer agents.
✓ 已验证
DOI
PubMed
高影响因子
MOLECULES
·
2020
·Vol. 25
·期 12
·2826
·
IF 3.267
Jun Mei,Feng Liu,Shiyuan Fang,Weiqing Lan,Jing Xie
The effects of modified atmosphere packaging (MAP) in combination with superchilling (−1.3 °C) on the physicochemical properties, flavor retention, and organoleptic evaluation of turbot samples were investigated during 27 days storage. Results showed that high-CO2packaging (70% or 60% CO2) combined with superchilling could reduce the productions of off-flavor compounds, including total volatile basic nitrogen (TVB-N) and ATP-related compounds. Twenty-four volatile organic compounds were determined by gas chromatography–mass spectrometry (GC/MS) during storage, including eight alcohols, 11 aldehydes, and five ketones. The relative content of off-odor volatiles, such as 1-octen-3-ol, 1-penten-3-ol, (E)-2-octenal, octanal, and 2,3-octanedione, was also reduced by high-CO2packaging during superchilling storage. Further, 60% CO2/10% O2/30% N2with superchilling (−1.3 °C) could retard the water migration on the basis of the water holding capacity, low field NMR, and MRI results, and maintain the quality of turbot according to organoleptic evaluation results during storageKeywords:turbot;modified atmosphere packaging;superchilling;shelf life;quality
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2021
·
IF 7.92
Jianguo Liu,Shanshan Lin,Jiangming Sun,Longlong Ma
Transition metal-catalyzed semi-hydrogenation of alkynes has become one of the most popular methods for alkene synthesis. Specifically, the noble metal Pd, Rh, and Ru-based heterogeneous catalysts have been widely studied and utilized in both academia and industry. But the supported noble metal catalysts are generally suffering from leaching or aggregation during harsh reaction conditions, which resulting low catalytic reactivity and stability. Herein, we reported the facile synthesis of nitrogen doped graphene encapsulated Pd catalyst and its application in the chemo-selective semi-hydrogenation of alkynes. The graphene layer served as “bulletproof” over the active Pd Nano metal species, which was confirmed by X-ray and TEM analysis, enhanced the catalytic stability during the reaction conditions. The optimized prepared Pd@N/C catalyst showed excellent efficiency in semi-hydrogenation of phenylacetylene and other types of alkynes with un-functionalized or functionalized substituents, including the hydrogenation sensitive functional groups (NO 2 , ester, and halogen).
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Huixian Zhou,Hui Zhong,Yiqing Zeng,Yutang Kang,Bin Chen,Shuanglu Ma,Yifan Li,Yu Zhang,Shasha Feng,Zhaoxiang Zhong,Weihong Xing
The strategy of constructing catalytic membrane has a significant influence on its structure and performance. In this work, Co 3 O 4 -C x @SiO 2 nanofiber membranes (NFMs) were fabricated by an in-situ growth–pyrolysis–oxidation strategy. The Co 3 O 4 -C x catalyst derived from ZIF-67 was wrapped around nanofibers, which helps to maintain a stable membrane structure, then suppressing the reduction of gas permeability. Among the Co 3 O 4 -C x catalyst, the carbon skeleton can prevent the agglomeration of Co 3 O 4 nanoparticles, obtaining an ultra-fine Co 3 O 4 nanoparticles with high dispersibility, redox property and surface area. The obtained Co 3 O 4 -C 300 @SiO 2 NFM exhibits outstanding ammonia selective catalytic reduction (NH 3 -SCR) denitrification activity (T 90 = 225 °C at a GHSV of 77,000 h −1 ). The effect of catalyst loading on PM 2.5 filtration performance of SiO 2 NFM was also tested. Co 3 O 4 -C 300 @SiO 2 NFM has higher filtration efficiency (99.99%) than SiO 2 NFM at a lower pressure drop of 58 Pa, which suggests that catalyst loading via our method can improve the filtration performance of SiO 2 NFM. This work might provide a universal strategy for the design and preparation of highly efficient catalytic membrane.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Yuan Zhuang,Siyi Yuan,Jiemin Liu,Yan Zhang,Hao Du,Chuandong Wu,Peng Zhao,Haiying Chen,Yipu Pei
Volatile organic compound (VOC) emissions are a global environmental concern because of their potential health risks. The removal of refractory VOCs calls for advanced technologies with powerful oxidative ability and high mass transfer efficiency. In this study, a yolk-shell Fe 3 O 4 @C/Fenton system was designed to improve octane removal efficiency. The octane removal efficiency at equilibrium was increased by 24.7% relative to that of the Fe 3 O 4 /Fenton system, and the main intermediate or byproduct levels decreased by 89.4%. The yolk-shell Fe 3 O 4 @C displayed higher catalytic and mass transfer efficiencies for octane degradation than Fe 3 O 4 . A synergistic effect of mass transfer enhancement and catalytic oxidation was observed in the yolk-shell Fe 3 O 4 @C/Fenton system. The mechanism of the synergistic effect of mass transfer and octane degradation, a regional reaction theory for the yolk-shell structure, and octane removal pathways were proposed and supported by the octane removal results and byproducts detection and measurement. This yolk-shell Fe 3 O 4 @C/Fenton system provides an effective and advanced way to treat refractory and hydrophobic VOCs, and its preparation can be extended to other high-efficiency core-shell structure catalyst-carbon materials.
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Dandan Han,Jialin Geng,Jingze Luan,Weiwei Jian,Lin Wu
Manganese-based oxides are promising cathodes for aqueous zinc-ion batteries but often suffer from structural instability, manganese dissolution, and poor conductivity. Herein, we propose a "dual-network synergistic construction" strategy through the in-situ derivation of a metal–organic framework to concurrently address these challenges. This strategy ingeniously constructs an oxygen-deficient network and a conductive carbon network within a hierarchical Mn₂O₃/C composite (O d -Mn₂O₃/C-400). The formed interfacial Mn–O–C bonds effectively enhance structural integrity and regulate the concentration of oxygen vacancies. As a cathode for aqueous zinc-ion batteries, the O d -Mn₂O₃/C-400 composite demonstrates exceptional electrochemical performance, delivering a remarkable specific capacity of 425 mAh·g⁻¹ at 3 A·g⁻¹. More importantly, it exhibits outstanding long-term cyclability, retaining 87.67% of its capacity (174 mAh·g⁻¹) after 5,000 cycles at a high current density of 5 A·g⁻¹. When configured into a zinc-ion hybrid supercapacitor (O d -Mn₂O₃/C-400//AC), the device achieves a high energy density of 119 Wh·kg⁻¹ at 189 W·kg⁻¹, and maintains 78.6% capacity retention with 97.5% Coulombic efficiency over 3,000 cycles. This work provides an effective material design paradigm for developing high-performance manganese-based electrodes for advanced energy storage systems.
✓ 已验证
产品关联
DOI
高影响因子
CEMENT AND CONCRETE RESEARCH
·
2025
·
IF 13.1
Xin Liu,Dining Li,Hui Xie,Jiachen Yao,Xuyan Shen,Haochuan Wang,Zhengyao Qu,Zuhua Zhang,Pan Feng
Alkali-free aluminum sulfate (AS)-based accelerators have become a widely adopted and indispensable admixture for shotcrete applications. However, their effects on the formation kinetics and properties of calcium silicate hydrate (C-S-H) – the primary hydrate in shotcrete – remain insufficiently understood. To bridge this knowledge gap, a combination of isothermal calorimetry, QXRD, and TGA was employed to uncover the temporal evolution of C-S-H. In addition, the chemical compositions and silicate chain structure were comprehensively examined using BSE-EDS, 27 Al NMR, coupled with 29 Si NMR techniques. Our results demonstrate that AS addition accelerated C 3 S hydration, promoting the C-S-H nucleation and growth rate. This acceleration effect can be ascribed to (1) the accelerated dissolution of silicate phases at early stages, and (2) the formation of divergent C-S-H needles, providing more nucleation sites while mitigating impingement between adjacent C-(A)-S-H needles. Multiple characterizations confirmed the enhanced incorporation of aluminum into C-S-H, predominately at the bridging site. Notably, increasing AS content decreased the Si/Ca of the C-(A)-S-H and concurrently enhanced the aluminum incorporation. This compositional shift led to the formation of longer aluminosilicate chains and concomitant improvements in the hardness and elastic modulus of C-(A)-S-H. These findings offer valuable insights into AS-induced alterations in C-(A)-S-H within accelerated cement pastes, facilitating the deeper understanding of the role of C-(A)-S-H in strength development and long-term durability of shotcrete.
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2025
·
IF 11.6
Hao Lu,Xianchu Wang,Chenyu Wang,Qihang Wang,Jingjing Xie,Weiming Wang,Zhengyi Fu,Zhaoyong Zou
Zeolitic Imidazolate Frameworks (ZIF-8) has emerged as promising candidate for alleviating the aggregation of Fe 3 N-catalysts, exhibiting significantly improved oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) for rechargeable zinc-air batteries. To further improve the catalytic performance, it is crucial to fabricate ZIF-8 with hierarchically porous structures, which remains challenging due to the rapid crystallization kinetics and the weak interactions. Inspired by biological porous materials, we developed a novel method using 1,3,5-trimethylbenzene TMB as a mediating molecule to dynamically regulate the organic-inorganic interface between templates and ZIF-8 precursors, achieving the micro-meso-macropores of ZIF-8, which synergistically enhances mass transport and active site accessibility. Additionally, TMB preserves the weakly alkaline environment required for ZIFs’ structural integrity by leveraging its hydrophobic co-solvent effect. The as-synthesized Fe 3 N-HPZIF-8 catalyst integrates Fe 3 N active sites, hierarchically porous structures, and pyrrolic-N dopants, resulting in the exceptional bifunctional activity in alkaline media (ΔE = 0.619 V), exceeding most benchmark catalysts. When integrated into zinc-air batteries, a peak power density of 205.2 mW cm -2 is achieved. This work presents a generalizable synthetic approach for high-performance metal-air battery catalysts.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL SCIENCES
·
2025
·
IF 2
Xia Shaojie,Yang Zhenyuan,Sun Xiaohui,Huang Junjie,Peng Kuan,Wang Yonghong
Ochratoxin A (OTA), a highly toxic mycotoxin, extensively contaminates a wide range of food commodities. Given increasing demands for sensitive and user-friendly detection platforms, we developed a colorimetric OTA biosensor leveraging copper-silver nanoclusters (Cu/Ag NCs), whose peroxidase-like activity is augmented via G/C-rich DNA hybridization. The system employs two tailored DNA strands: a template strand featuring a cytosine-rich domain for NC synthesis flanked by terminal recognition segments and an enhancer strand containing a guanine-rich signal amplification domain and a complementary linker. Upon OTA binding with the aptamer, the apt-template complex dissociates, facilitating template-enhancer hybridization to form G/C-rich double-stranded DNA. This structural transition substantially enhances the peroxidase-like activity of DNA-Cu/Ag NCs, accelerating the oxidation of 3,3′,5,5′-tetramethylbenzidine by H 2 O 2 while simultaneously amplifying the colorimetric signal. Quantitative OTA detection is accomplished by monitoring this dynamic color response. The biosensor demonstrates a semi-log linear detection range from 5.0 nM to 1.0 μM with a detection limit of 5.0 nM. Furthermore, the specific test has high selectivity for other common mycotoxins, and its applicability has been validated through real sample analysis, suggesting that the DNA-Cu/Ag NCs biosensor used for OTA detection holds promising practical applications in food samples. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Catalysis
·
2025
·
IF 13.1
Yuan Li,Ruizhe Li,Pingping Rui,Jingwen Cheng,Yunxiang Li,Hong Yuan,Shuxin Ouyang
Fischer–Tropsch synthesis (FTS) offers a route for converting syngas from nonpetroleum resources into valuable chemicals, such as light olefins. χ-iron carbide (χ-Fe5C2), the key active phase for olefin production, is plagued by poor stability under practical conditions. Here, we propose a synthesis-to-catalysis full-process Cu-assisted strategy that integrates synthesis, photothermal conversion and reaction regulation into a design framework, thereby enabling a Cu/Fe5C2@C catalyst with improved durability and catalytic performance. The optimized 0.20Cu/Fe5C2@C catalyst achieves 48.7% light olefins selectivity, a 3.1-fold increase in light olefin yield compared to Fe5C2@C, and markedly improved long-term stability under photothermocatalytic FTS. Mechanistic studies reveal that the full-process synergy of Cu enhances catalytic performance by promoting the formation of a highly graphitized carbon shell to stabilize χ-Fe5C2 during synthesis, enhancing photothermal conversion efficiency via localized surface plasmon resonance, and optimizing reactant activation and the CH2* intermediate transformation toward light olefins. This work establishes a full-process regulation paradigm that integrates multistage functions, offering a transformative approach toward high-performance, durable solar-driven FTS for nonpetroleum resource utilization.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 106
·104398-104406
·
IF 3.289
Cong Zhang,Jingbo Qi,Jing Xing,Si-Fu Tang,Liang Song,Yuanyuan Sun,Chuanhui Zhang,Hongchuan Xin,Xuebing Li
Aqueous phase catalytic upgrading of lignin monomers to hydrocarbons via hydrodeoxygenation (HDO) has been explored using a combination of Pd/C and HZSM-5 catalysts under 2 MPa of H2 (ambient temperature). Model monomers with varying numbers of methoxy groups, including phenol, anisole, guaiacol and 2,6-dimethoxy-phenol, were chosen as lignin model compounds. Mechanistic studies revealed cascade and parallel reaction pathways via hydrogenation and dehydration (hydrolysis) processes, which were catalyzed by Pd/C and HZSM-5, respectively. Hydrogenation was preferred at lower temperature, whereas higher temperature was favorable for the removal of oxygen-containing functional groups. The effect of methoxy groups on the HDO of these monomers was also investigated systematically. Basically, the conversion of multi-substituted monomers was tougher than that of mono-substituted ones, due to steric constraint and the inhibition of the electron-donating hydroxyl group. The selectivities to cyclohexane from phenol and anisole were improved significantly by increasing the temperature to 413 K. However, cyclohexanone was preferably produced over cyclohexane when using model compounds with multi-substituents (guaiacol and 2,6-dimethoxy-phenol), even at temperatures above 513 K. Comparative experiments were also conducted on the HDO of 1,2-cyclohexanediol with or without the presence of phenol, which clearly suggested that the further HDO of guaiacol and 2,6-dimethoxy-phenol was inhibited, probably due to the strong interactions between cyclohexanediol molecules and Brønsted acid sites.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）