CHINESE JOURNAL OF POLYMER SCIENCE
·
2019
·Vol. 38
·期 3
·257-267
·
IF 2.804
Shi Kai,Sha Di,Xu Jiu-Duo,Yang Xu,Wang Bao-Long,Pan Yan-Xiong,Ji Xiang-Ling
In this work, the Hofmeister effects of nine kinds of anions at different concentrations on the lower critical solution temperature (LCST) of the macroporous thermo-responsive poly( N -isopropylacrylamide) grafted poly(vinyl alcohol) formaldehyde (PVF- g -PNIPAM) hydrogels are investigated with differential scanning calorimetry (DSC). Four kinds of anions with strong hydration, including CO 3 2– , SO 4 2– , S 2 O 3 2– , and F – , and four kinds of anions with weak hydration, including Br – , NO 3 – , I – , and ClO 4 – , and Cl – as a medium anion are systematically studied and found to demonstrate the effects of the residual hydroxyl groups and network structure of PVF on the LCST values of PVF- g -PNIPAM hydrogels in comparison with that of neat PNIPAM. On the one hand, the existence of hydroxyl groups on PVF backbone promotes the solubility of grafted PNIPAM due to their hydrophilicity and hydrogen-bond interactions with water. On the other hand, the network structure of as-prepared samples restricts free movements of grafted PNIPAM chains, which results in the increase of LCST values. In addition, the difference of grafting percentage also influences the variation of LCST values of PVF- g -PNIPAM hydrogels under salt concentration.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2019
·
IF 4.175
Xiaowang Lu,Xiazhang Li,Feng Chen,Zhigang Chen,Junchao Qian,Qinfang Zhang
The novel nitrogen doped two-dimensional CeO 2 –TiO 2 nanosheets with a thickness of less than 5 nm were synthesized by a facile impregnation method using Chinese rose petals as biological templates. The detailed characterization by field emission scanning electron microscope (FESEM), transmission electron microscope (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) exhibited that the CeO 2 –TiO 2 composites exactly duplicated the microstructure of Chinese rose petal and the self-owned nitrogen was successfully doped into the CeO 2 –TiO 2 composites, which could enhance the visible light absorption efficiency. UV–Vis diffuse reflection spectroscopy (DRS), photocurrent measurement (PM), electrochemical impedance spectroscopy(EIS) and photoluminescence spectroscopy (PL) were used to analyze the electrons and holes separation efficiency, which revealed that CeO 2 and TiO 2 formed well-defined hetero junctions promoting the effective separation of photogenerated electrons and holes. The photocatalytic activity of the samples was evaluated by photocatalytic degradation of dibenzothiophene (DBT) in model oil. The amount of hydrogenperoxide (H 2 O 2 ) and photocatalysts , the molar ratios of Ce and Ti in CeO 2 –TiO 2 composites as photocatalytic reaction conditions were investigated. Results showed that the removal rate of DBT could reach 93.7% under visible light irritation for 3 h, when the molar ratio of Ce/Ti was 1/1, the mass ratio of photocatalyst/DBT was 1/2 and the molar ratio of H 2 O 2 /DBT was 2/1. The trapping experiments confirmed that the photoinduced active species (•OH radical) was responsible for the degradation of DBT. Further studies demonstrated that DBT was converted to the corresponding sulfone, which could be extracted by the polar solvent. Moreover, a plausible mechanism for the photocatalytic oxidative desulfurization of this nanocomposite was proposed.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Maoli Yin,Yingfeng Wang,Yan Zhang,Xuehong Ren,Yuyu Qiu,Tung-Shi Huang
The aim of this study was to develop novel nanofibrous membranes based on the quaternary ammonium N-halamine chitosan (CSENDMH) and polyvinyl alcohol (PVA) for antibacterial and hemostasis wound dressing. To improve the antimicrobial properties of nanofibrous membranes, a new chitosan-quaternary ammonium N-halamine derivative was successfully synthesized, and the structure was analyzed by 1H NMR and 13C NMR, fourier transform infrared (FTIR) spectroscopy, and elemental analysis. The morphological and water absorption ability studies showed that the membrane had a uniform bead-free network and high porosity structure like natural extracellular matrix as well as high hydrophilicity. For in vitro evaluation of the hemostatic effect, the membranes showed excellent blood clotting capacity, especially the PVA/CSENDMH membranes. The antimicrobial assay demonstrated excellent antibacterial activity of nanofibrous membranes against both gram-negative and gram-positive bacteria. Furthermore, the cytocompatibility assay results indicated that human fibroblasts could adhere and proliferate on the membranes, thus corroborating their biocompatibility.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2019
·
IF 5.383
Aijuan Xie,Jie Zhang,Xiang Tao,Jianghui Zhang,Bingyan Wei,Wenhao Peng,Yuwei Tao,Shiping Luo
Nickel-based metal organic framework materials were first prepared by hydrothermal method and used as the precursor. Ni/nitrogen-carbon (Ni–N–C), Ni@NiO–N–C and NiO–N–C mixtures derived from metal organic skeleton were successfully prepared by controlling the heat treatment conditions and applied in the electrocatalytic oxygen evolution reaction (OER). Through a series of research of OER catalytic performance, OER process kinetics, and stability, the as-prepared Ni @ NiO/N–C nanowires (NW) (250 °C) with core-shell structure showed the most prominent activity. Compared with other derived mixed materials, the oxygen evolution overpotential was 390 mV at the current density of 10 mA cm −2 , and the Tafel slope was 100 mV dec −1 . Moreover, the material showed excellent stability without significant decrease of activity after a long time of testing. The detail study regarding the formation and evolution of Ni/NiO NWs is of considerable value and may offer prospects for developing highly active electrocatalysts in electrochemical energy devices.
✓ 已验证
产品关联
DOI
高影响因子
Nano Energy
·
2019
·
IF 15.548
Bangsen Ouyang,Cheng Chang,Li-Dong Zhao,Zhong Lin Wang,Ya Yang
Self-powered photodetectors (PDs) have attracted great attentions due to energy shortage and the upcoming internet of things . However, the bottleneck of traditional methods to enhance the output performances of self-powered PDs are largely limited. Here, we report a dramatic coupling enhancement ("1 + 1>2") of the output signals in a bromine doped tin selenide (SnSe:Br) single crystal due to the thermo-photoelectric coupled effect for enhanced self-powered PDs. As compared with that of individually illuminating the device, both the output current and voltage signals of the PD can be enhanced by 38.1% and 81.9% under the simultaneous illumination at the top surface and cooling at the bottom surface, respectively. The coupling enhancement mechanism is associated with the same polarities of photoelectric and thermoelectric signals during the cooling process, where the photo-generated electrons can be accelerated by the driving force of the thermoelectric field under the cooling condition. This work offers a novel approach to enhance the output performances of self-powered PDs.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2019
·
IF 14.229
Jiashi Wang,Qinhong Wei,Qingxiang Ma,Zhongya Guo,Fangfang Qin,Zinfer R. Ismagilov,Wenzhong Shen
At present, the increasing consumption of fossil fuels as well as the expanding of more effective avenues to prepare carbon materials have inspired scholars' confidence to seek for alternative carbon sources. To address this issue, a N-doped graphene shell encapsulated metallic Co (Co@NGs) catalyst was fabricated using glucose and melamine as carbon source and nitrogen source via carbonization and employed for 5-hydroxylmethylfurfural (HMF) hydrogenation to produce 2,5-dimethylfuran (DMF) biofuel. Here, the prepared Co@NGs catalyst which possessed striking Mott-Schottky effect presented strong electronic interaction at the interface of surface metallic Co and doped N, leading to the electron transfer from metallic Co to doped N on carbon substrate. Experimental results indicated that the decreased electron density of metallic Co was more conductive to selective catalytic hydrogenation of HMF to form DMF. More importantly, the catalytic activity of the Mott-Schottky-type Co@NGs catalyst could be regulated by adjusting the nitrogen content. That is, the high nitrogen content increased the work function of Co@NGs and thus the enhanced rectifying response at the interface by which to enhance the catalytic performance. The best Co@NGs catalyst exhibited both high HMF conversion (close to 100 %) and DMF selectivity (94.7 %), much better than those of conventional N-doped carbon supported Co catalysts.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2019
·
IF 3.206
Yueran Zhu,Yunguang Lu,Longyan Shi,Yaling Yang
A green, reliable and simple assay for Fluoroquinolone derivatives (FQs) is developed based on Mono-(6-Amino-6-Deoxy)-β-Cyclodextrin (β-CD) were modified on the surface of N,Zn co-doped carbon dots (N,Zn-CDs). FQs not only enhance β-CD-N,Zn-CDs fluorescence intensity, but also red-shift. Since FQs has the same effect on the fluorescence of β-CD-N,Zn-CDs, so ofloxacin (OFL) as a representative for analysis. Under optimized detection conditions, the linear range is 0.075–3.75 μM and the LOD is 0.05 μM (S/N = =3). Finally, the proposed method was successfully applied in the determination of OFL in milk and domestic water with satisfactory recoveries.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Liang Cao,Bao Zhang,Haifeng Xia,Chunhui Wang,Bi Luo,Xinming Fan,Jiafeng Zhang,Xing Ou
Although potassium-ion batteries (PIBs) have received increasing attentions in the large-scale energy storage application own to its natural abundance of potassium resources, the sluggish reaction kinetics and inferior structure endurability of host materials severely restrict the PIBs development. Herein, we rationally design an exquisite hierarchical MoS 2 /Sb heterostructure encapsulated into N-doped graphene framework (MS@C) as an advanced anode material for PIBs. Specifically, the evenly distributed Sb nanoparticles are impregnated into the few-layered MoS 2 nanosheets, which are further encapsulated by the N-substituted graphene framework, constructing a hierarchical chrysanthemum-like heterostructure. It is noted that this heterostructure can not only effectively prevent the coarsening of alloyed Sb nanograins at the heterointerface, but also serve as the buffer container to alleviate the volume expansion during (de)potassiation process. Moreover, benefitting from the synergistic coupling effect induced between the external nitrogen-doped graphene and internal MoS 2 /Sb heterostructure, the electron transportation and ions diffusion are aggressively accelerated, promoting the entire electrode conductivity. Consequently, the resulting MS@C composite delivers a high reversible capacity (359.5 mAh g −1 at 0.05 A g −1 ) and outstanding cycling stability (only capacity loss of 0.027% per cycle during long-term 1000 cycles at high rate of 2 A g −1 ), demonstrating the robust structural integrity and excellent electrochemical performance. This work provides a promising strategy of composition optimization for delicately designing advanced anode materials, demonstrating the promising in exploring high-quality potassium-ion storage applications.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Fan Du,Lei Zhang,Jiliang Ma,Xinwen Peng
Two kinds of xylan/palladium catalysts (PACMX-Pd and EDAX-Pd) were simply fabricated by integrating two N bidentate ligands into the skeleton of oxygen-rich xylan and followed with the in-situ reduction of palladium. The Pd loading in PACMX-Pd and EDAX-Pd nanocomposites was 0.353 mmol/g and 0.302 mmol/g, respectively. The catalysts exhibited an excellent catalytic activity for the Suzuki reaction with a yield of high up to 100% as well as a superior turnover frequency (TOF: 9626 h −1 ). Moreover, the catalysts showed outstanding stability and could be reused for at least 5 times without significant decrease in activity. Compared with other polymers and non-polymers supported palladium catalysts, the as-prepared biomass-based catalysts possess potential applications in a wide range of organic catalysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
·
2019
·
IF 3.261
Minghuan Gao,Lisha You,Linna Guo,Tiesheng Li
Polyhedron-like WO 3 (n-type WO 3 ) nanoparticles were synthesized by a simple hydrothermal reaction without using any template or surfactant. The Polyhedron-like WO 3 /Ag 2 CO 3 p-n junction photocatalyst was first synthesized by a simple impregnation-deposition way. The obtained samples were investigated by XRD, BET, XPS, SEM, TEM etc. The separation mechanisms of photo-induced electrons (e − ) and photo-induced holes (h + ) of the Polyhedron-like WO 3 /Ag 2 CO 3 p-n junction samples were characterized by PL technique, EIS and determination of active sites and species in the photocatalytic reactions. In this p-n junction structure, Polyhedron-like WO 3 nanoparticles adhered to the surface of the Rod-like p-type Ag 2 CO 3 nanoparticles. The Polyhedron-like WO 3 /Ag 2 CO 3 p-n junction photocatalyst showed much higher photocatalytic activity than both single materials for RhB degradation under UV–vis light irradiation, and even 17 times higher than commercial powders (P25) at the same circumstance. Even compared with the related photocatalyst, it still exhibits the highest photocatalytic ability. The highly enhanced photocatalytic of the Polyhedron-like WO 3 /Ag 2 CO 3 p-n junction photocatalyst can be attributed to extended absorption, more effective separation of photogenerated charges, the transfer rate of photo-induced charge carriers and forming of p-n junction system.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHYSICAL CHEMISTRY B
·
2019
·
IF 2.923
Nannan Duan,Hang Lu,Lin Ye,Ai-Ying Zhang,Zeng-Guo Feng
Compared with polypseudorotaxanes (PPRs) formed from the self-assembly of β-cyclodextrins (β-CDs) with poly(propylene glycol) (PPG) and γ-CDs with poly(N-isopropylacrylamide) (PNIPAAm), the ratio of the inner cavity size of β-CD to the cross-sectional area of PNIPAAm appears not appropriate for their self-assembly. For a better understanding of the possibility of β-CDs including PNIPAAm and the crystal structure of PPRs formed therefrom, the PNIPAAm homo- and copolymers were subjected to self-assembly with β-CDs in an aqueous solution at room temperature. The results revealed that when β-CDs meet thicker PNIPAAms, the self-assembly takes place, not only giving rise to PPRs by a manner of main-chain inclusion complexation but also presenting the PPRs a matched over-fit crystal structure different from those of either a matched tight-fit β-CD–PPG PPR or a mismatched over-fit γ-CD–PNIPAAm PPR. This is most likely due to the thicker PNIPAAm adapting its unfavorable main-chain cross-sectional area to fit into the cavity of β-CDs by changing the side-chain conformations. Based on the X-ray diffraction patterns, a monoclinic crystal system was created from these PPRs and the unit cell parameters calculated were as follows: a = 15.3 Å, b = 10.3 Å, and c = 21.2 Å; β = 110.3°; and space group P2. It suggested that this matched over-fit crystal structure would possess a Mosaic crystal structure rather than a typical channel-like one.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2019
·Vol. 7
·期 17
·10610-10618
·
IF 10.733
Zhaoliang Shi,Yuzun Fan,Wei Zhou,Lin Guo
It is critical to fabricate special electron transfer channels and conductive buffer layers in order to obtain efficient electrode materials using interfacial engineering. In this research, ultrathin carbon layers were intercalated into 5 nm thick cobalt oxide (CoO) sheets and used to form porous sandwich-type CoO/nitrogen-doped carbon multi-layers (s-CoO/N–C MLs) with multiple hetero-interfaces. These materials were tested as lithium ion battery anodes, and the reversible capacity of this multi-layered sandwich structure reached 1031.2 mA h g−1 at 0.5 A g−1 after 500 cycles, which was superior to multi-layered nanoplatelets without carbon. The composite also exhibits a high specific capacity of 864.8 mA h g−1 with ∼100% capacity retention at 1 A g−1 and 538.8 mA h g−1 with ∼90% retention at a high current density of 10 A g−1 even after 1200 cycles. The electrochemical measurements reveal that the s-CoO/N–C MLs take up a 71.3% charge contribution from the capacitive-controlled capacity, resulting in excellent rate performance and long-term cycling stability. The much enhanced performance could be ascribed to the interlayer ultrathin carbon of the unique sandwich structure, which could provide electron transfer channels, offer extra lithium storage sites, and serve as buffer layers for volume change during the lithium ion insertion/extraction process. This research may provide insights into the design of hetero-interface advanced electrode materials.
✓ 已验证
产品关联
DOI
高影响因子