Acta Biomaterialia
·
2021
·
IF 8.947
Chuanchuan He,Xiaojuan Zhang,Chen Chen,Xiaoguang Liu,Yan Chen,Ruicong Yan,Ting Fan,Yongkang Gai,Robert J. Lee,Xiang Ma,Jun Luo,Yao Lu,Tan Yang,Guangya Xiang
The unfavorable factors in tumor microenvironment such as hypoxia and limited H 2 O 2 levels greatly impede the anticancer efficacy of chemotherapy and chemodynamic therapy (CDT). To address these issues and achieve O 2 /H 2 O 2 -sufficient chemo/chemodynamic combination therapy, we synthesized a solid lipid monostearin coated calcium peroxide (CaO 2 ) nanocarrier for the co-delivery of a chemotherapeutic drug doxorubicin (DOX) and a biocompatible Fenton catalyst iron-oleate complex. Specifically, the solid lipid shells of nanoparticles could disintegrate in lipase-overexpressed cancer cells to release iron-oleate and expose CaO 2 cores. Afterwards, the uncovered CaO 2 responded to the acidic aqueous environment within cancer cells, leading to the release of DOX molecules and generation of H 2 O 2 . Based on Fenton reactions, Fe 3+ liberated from iron-oleate reacted with H 2 O 2 to produce O 2 for hypoxia-relieved chemotherapy, and Fe 2+ for the catalytic generation of hydroxyl radical to initiate CDT. Both treatments synergistically contribute to the enhanced antitumor outcomes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Energy Storage Materials
·
2020
·
IF 16.28
Xiaohong Zou,Kaiming Liao,Di Wang,Qian Lu,Chuan Zhou,Ping He,Ran Ran,Wei Zhou,Wanqin Jin,Zongping Shao
Although aprotic Li-air batteries offer an attractive option for achieving ultrahigh energy density of electrochemical energy storage devices, the now-established system has so far fallen short of its potential due to a daunting challenge related to its open configuration, which results in not only the rapid corrosion of Li metal anodes but also the gradual evaporation of organic liquid electrolytes. Here, we show that these issues can be well addressed by protecting the Li-air battery with a new O 2 -permeable silica-aerogel-reinforced polydimethylsiloxane external membrane (OPSP). The highly flexible OPSP basically benefiting from hydrogen-bond cross-linking can be constructed in situ on any substrate with particularly desirable properties such as being water-/electrolyte-proof, O 2 -permeable, high thermotolerance, and transparent, which allows stable cycling of coin-type and flexible Li-air batteries under harsh conditions, such as a highly volatile DMSO electrolyte (over 660 h), a humid air (O 2 ) atmosphere (over 700 h) or circumstances in air (O 2 )-saturated liquid water (over 25 h). This work could potentially open a new research direction in developing O 2 -permeable membranes through hydrogen-bond cross-linking for the unfettered design of metal-air batteries.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Runping Wu,Qing Ye,Kai Wu,Shuiyuan Cheng,Tianfang Kang,Hongxing Dai
The alkali metal (M = Na, K, Rb, and Cs)-modified C-FDU-15 (M-C-FDU-15( x ); x was the M/C-FDU-15 M ratio, and equal to 0.01–0.03) samples were prepared through an in situ process, and characterized by means of the TG, XRD, TEM, EDS, N 2 adsorption–desorption, O 2 -TPD, and CO 2 -TPD techniques. The (NO + O 2 ) adsorption mechanism was investigated using the (NO + O 2 )-TPD and DRIFTS techniques. The results show that the sequence of (NO + O 2 ) adsorption performance was Na-C-FDU-15(0.01) (104.1 mg/g) > K-C-FDU-15(0.01) (92.4 mg/g) > C-FDU-15 (76.2 mg/g) > Rb-C-FDU-15(0.01) (65.1 mg/g) > Cs-C-FDU-15(0.01) (62.3 mg/g). The alkali metal was uniformly distributed in C-FDU-15 and its doping enhanced the amount of the basic sites in the sample. Moreover, the optimal Na/C-FDU-15 M ratio was 0.02. (NO + O 2 ) were chemically adsorbed mainly in the forms of nitrite (NO 2 − ) and nitrate (NO 3 − ) on M-C-FDU-15( x ). A more amount of NO was converted to nitrate than to nitrite. There were three key factors of enhancing the (NO + O 2 ) adsorption capacity of C-FDU-15 due to alkali metal doping: the first factor was the increasing of surface area and pore volume of the sample, the second one was the enhancement in amount of the active sites in the sample, and the third one was the smaller alkali metal ionic radius in the sample.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Fanyu Meng,Lina Guo,Haocheng Zou,Boming Zhu,Fayang Zhou,Yiqing Zeng,Jiayou Han,Jun Yang,Shule Zhang,Qin Zhong
To achieve high NO oxidation efficiency, excessive O 3 must be used, which would lead to the high cost and escape of ozone. Herein, we adopted low cost and environmental-friendly TiO 2 as the catalyst of low concentration O 3 and H 2 O 2 system for high-efficiency NO x oxidation. The Ti sites on TiO 2 were the deprotonation sites of H 2 O 2 and H 2 O into Ti-OOH and Ti-OH species, respectively. We found that the surface of rutile phase TiO 2 had a low concentration Ti-OOH component but a large amount of Ti-OH after contacting with H 2 O 2 solution, thus lots of ·OH and a few O 2 − radicals formed with introducing O 3 molecules. H 2 O 2 solution induced the formation of a large amount of Ti-OOH and Ti-OH species on the anatase phase TiO 2 surface, thus lots of O 2 − generated in the O 3 /H 2 O 2 system. O 2 − and O H radicals could efficiently oxidize NO, in which O 2 − radicals could oxidize NO to NO 3 − in one step with high selectively. Therefore, anatase TiO 2 had better performance in NO x oxidation than rutile phase TiO 2 . The effect of temperature and SO 2 concentration on NO oxidation was also investigated, the results showed that TiO 2 -A/O 3 /H 2 O 2 system promoted NO oxidation at a low temperature and a low concentration of SO 2 .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2024
·Vol. 36
·期 31
·2404319
·
IF 27.4
Zongqiang Sun,Xiaodong Lin,Chutao Wang,Yanyan Tan,Wenjie Dou,Ajuan Hu,Jiaqing Cui,Jingmin Fan,Ruming Yuan,Mingsen Zheng,Quanfeng Dong
Lithium–oxygen (Li–O 2 ) batteries, renowned for their high theoretical energy density, have garnered significant interest as prime candidates for future electric device development. However, their actual capacity is often unsatisfactory due to the passivation of active sites by solid-phase discharge products. Optimizing the growth and storage of these products is a crucial step in advancing Li–O 2 batteries. Here, a fluorine-doped bimetallic cobalt-nickel oxide (CoNiO 2– x F x /CC) with an interlaced catalytic surface (ICS) and a corncob-like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a “single adsorption catalytic mechanism,” the ICS of CoNiO 2− x F x /CC offers a “competitive adsorption catalytic mechanism,” where oxygen sites facilitate oxygen conversion while fluorine sites contribute to the growth of Li 2 O 2 . This results in a change in Li 2 O 2 morphology from a surface film to toroidal particles, effectively preventing the burial of active sites. Additionally, the unique open architecture aids in the capture and release of oxygen and the formation of well-contacted Li 2 O 2 /electrode interfaces, which benefits the complete decomposition of Li 2 O 2 products. Consequently, the Li–O 2 battery with a CoNiO 2− x F x /CC cathode demonstrates a high specific capacity of up to 30923 mAh g −1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide-based cathodes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SOLID STATE IONICS
·
2016
·
IF 2.38
Guofeng Xu,Qingrui Xue,Jianling Li,Zhanyu Li,Xinping Li,Tianheng Yu,Jiguang Li,Xindong Wang,Feiyu Kang
Lithium-excess layered cathode materials Li[Li 0.2 Mn 0.54 − x Sm x Co 0.13 Ni 0.13 ]O 2 (x = 0, 0.01, 0.03, 0.05) with different quantities of Sm were synthesized by the coprecipitation-calcination method. The rare earth element samarium (Sm) was introduced into the structure of Li[Li 0.2 Mn 0.54 Co 0.13 Ni 0.13 ]O 2 as the replacement at Mn sites. The refinement unit cell parameters from the X-ray powder diffraction patterns illustrate the doping of Sm facilitates enlarging the lithium ions diffusion passageway space of the Li[Li 0 . 2 Mn 0.54 Co 0 . 13 Ni 0.13 ]O 2 structure. The Li[Li 0.2 Mn 0.51 Sm 0.03 Co 0.13 Ni 0.13 ]O 2 electrode presented the best electrochemistry properties. The initial discharge capacity is 287.5 mAh g − 1 and the initial coulombic efficiency increases from 81.31% to 85.34% with a constant current density of 12.5 mA g − 1 , which can be attributed to the suppression of the oxygen release from the structure at the initial charge-discharge process. The Li[Li 0·2 Mn 0.51 Sm 0.03 Co 0.13 Ni 0.13 ]O 2 electrode delivers 236.1 mAh g − 1 after 40 cycles and the capacity retention ratio is 82.12% while only 206.8 mAh g − 1 and 70.85% are obtained after 40 times of cycling for the pristine electrode. The Nyquist plots indicate that the electrical conductivity and interfacial electrochemical reaction activity increase as well.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2014
·Vol. 17
·期 1
·335-342
·
IF 6.852
Muge Niu,Yucui Hou,Shuhang Ren,Wenhua Wang,Qitian Zheng,Weize Wu
Conversion of cellulose, the most abundant biomass, shows a high selectivity to yield formic acid (FA), when oxidized by O2 in NaVO3–H2SO4 aqueous solution. This conversion involves various reactions including hydrolysis and oxidation. In this work, the relationships between these reactions were studied. There are mainly two hydrolyses and two oxidations occurring in the conversion: initial hydrolysis (from cellulose to monosaccharides) and deep hydrolysis (from monosaccharides to levulinic acid); catalytic oxidation (from monosaccharides to FA) and ordinary oxidation (from levulinic acid to acetic acid). Among these four reactions, catalytic oxidation to FA and deep hydrolysis to byproducts are competitive. The increasing rate of deep hydrolysis is faster than that of catalytic oxidation, when temperature is increased. Catalytic oxidation is promoted and deep hydrolysis is suppressed, when the O2 pressure is increased. Moreover, deep hydrolysis is promoted and catalytic oxidation is suppressed, when H2SO4 concentration is increased. The hydrolysis–oxidation pathway of this conversion was proposed. Thus, the byproducts could be inhibited, and FA-oriented transformation could be realized.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS LETTERS
·
2014
·
IF 2.269
Ming Yan,Yan Yan,Chao Wang,Wei Lu,Weidong Shi
In this letter, Ni 2+ doped InVO 4 nanocrystals were successfully synthesized by a simple one-pot microwave-assisted method. The energy bandgap of obtained samples can be precisely controlled by varying the Ni 2+ doping amount. The O 2 production rate of obtained Ni–InVO 4 nanocrystals is higher than that of pure InVO 4 nanocrystals under visible-light, which can be ascribed to the narrowed band gaps. The corresponding 1% doped sample N1 has the highest O 2 production rate (394 μmol/h) in all samples, which is 66% higher than the undoped sample N0.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Physical Chemistry C
·
2014
·
IF 4.835
Sujie Chang,Shigang Ruan,Erlong Wu,Weixin Huang
Oxide-on-metal particles with exposed interfaces exhibit wealthy structures and functions, but their facile synthesis remains as a challenge. Herein we report a facile O2-assisted hydrothermal method to synthesize CeO2-on-Ag particles with different CeO2 thicknesses. In this novel approach Ag particles catalyze the O2 + H2O reaction to form surface hydroxyls that induce the preferential nucleation of Ce(OH)3 on the surfaces of Ag particles, eventually forming CeO2 adlayers on Ag particles. CeO2-on-Ag particles exhibit the CeO2 thickness-dependent SERS effect in which their best SERS effect is 2 orders stronger than that of Ag particles. They also exhibit CeO2 thickness-dependent catalytic performance in CO oxidation in which the best one is as active as traditional CeO2-supported Ag catalyst. These results open up new opportunities to synthesize oxide-on-metal particles and explore their functions by tuning the oxide adlayer thickness.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Cleaner Production
·
2025
·
IF 10
Mingjie Huang,Bingyuan Xu,Ke Feng,Wei Xiang,Xiaohui Wu,Yiliang Lv,Tao Zhou
Microscale zero valent iron (ZVI) is a promising material for in situ water purification through O 2 activation, but its activity is hindered by the slow electron transfer rate caused by the shielding effect of the surface passivation layer. Herein, we introduce a synergistic strategy that combines an inorganic ligand, i.e., tetrapolyphosphate (TPP), with magnetic field (MF) to boost the O 2 activation efficiency of ZVI under neutral conditions. This approach has resulted in a 4.7-fold increase in the degradation rate of diclofenac (DCF) compared to the MF-unassisted system and a remarkable 22.0-fold improvement over an analogous system with MF and EDTA. Multiphysics simulations, batch experiments, and characterizations revealed that the enhanced degradation rate was not only attributed to the elevated magnetic gradient on the ZVI surface to enrich the paramagnetic O 2 and Fe ions, but also to the functions of TPP to suppress the annihilation of •OH and reduce the redox potential of Fe 2+ /Fe 3+ . Furthermore, a synergistic mechanism between MF and TPP that facilitates the detachment of the surface-bound Fe 3+ -TPP complex into the aqueous phase, thereby regenerating the surface active sites was elucidated. This study underscores the potential of the MF-TPP synergy as an effective strategy to enhance ZVI-based Fenton-like catalysis for pollutant remediation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NUCLEAR MATERIALS
·
2025
·
IF 3.2
Chengyu Wang,Xiaorui Xu,Yang Tong,Wentao Zhou,Yafei Wang
Pyroprocessing of spent nuclear fuel is an important step in nuclear fuel cycle with the purpose of minimizing the radiation impact on environment and recycling useful elements. One major concern in the development of pyroprocessing is the structural material corrosion in LiCl-KCl molten salt electrolyte, which is the core component of the spent nuclear fuel reprocessing. To understand the influence of O 2- impurity on the structural material corrosion in LiCl-KCl molten salt, the study investigates the corrosion behavior of Inconel 600 alloy in LiCl-KCl molten salt containing different amounts of O 2- impurities at 500 °C by immersion corrosion experiments and electrochemical analyses.The results indicate that O 2- could accelerate the high-temperature corrosion behavior. The alloy surface developed a bilayer oxide structure following 500-hour exposure to molten salt with 3 mol% O 2- , identified as a 3.36-μm-thick outer Li 2 NiO 2 layer and a 1.11-μm-thick inner LiCrO 2 layer. Based on the corrosion behaviors of Inconel 600 alloy in LiCl-KCl molten salt with different amounts of O 2- impurities, a new O 2- affected corrosion mechanism involving the formation of dual-layer oxide films and nickel-rich particles was proposed, which could provide new insights for the corrosion study in the applications of pyroprocessing of spent nuclear fuel.
✓ 已验证
产品关联
DOI
高影响因子
ChemistrySelect
·
2024
·Vol. 9
·期 13
·e202303633
·
IF 1.9
Mingyan Chen,Wentao Wang,Xinkai Feng,Dehua Zhang,Yao Zhang,Yucheng Liu
Graphical This work describes the application of a highly efficient catalyst (NH 2 -UiO-66-Mo) to the catalytic oxidation desulfurization process. NH 2 -UiO-66-Mo can greatly improve the efficiency of oxidative desulfurization The optimum operating conditions of NH 2 -UiO-66-Mo are investigated through experiments, which prove the excellent performance of the catalyst, and the reaction mechanism is further studied through a series of characterizations. A highly efficient oxidative desulfurization composite catalyst NH 2 -Uio-66-Mo has been prepared and applied in the catalytic oxidative desulfurization. It was elucidated that Mo 6+ could increase the oxygen vacancies and active sites on the catalyst and increase the pore size of UiO-66. Meanwhile, the removal rate of dibenzothiophene (DBT) reached 99.2 % after 60 min under optimal conditions and remained above 90 % after 5 cycles, showing the composite catalyst's remarkable catalytic performance and satisfactory reusability NH 2 -UiO-66-Mo. In addition, kinetic studies revealed that the desulfurization process can present a pseudo-first-order kinetic process. The apparent activation energy was 10.6 kJ/mol. Finally, in combination with oxides, possible oxidation pathways were identified.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）