JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Mengying Tao,Zhaowei Jia,Hui He,Yanhu Han,Xin Yu,Yaofei Ren,Yuewei Wu,Yintong Lin,Zhongfeng Shi,Zhenxia Zhao,Zhongxing Zhao
Photocatalytic reduction of CO 2 exhibits unsatisfactory photocatalytic performance owing to the inefficient separation of photogenerated electron-hole pairs, low CO 2 capture efficiency and limited visible light absorption on most photo-catalysts. Herein, Ti F bridged IL-CuCQDs-F/TiO 2 inverse opal composite (IO-CFTi) was constructed for boosting CO 2 visible-photo reduction via slow photo effect. In this work, ethylenediaminetetraacetic acid (EDTA(Cu)) and imidazole ionic liquid 1-(2-Hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([HOEtMIM][BF 4 ]) were employed to confine grow of IL-CuCQDs-F within TiO 2 inverse opal supporter via Ti F bonds connection. Unique IL-CuCQDs-F efficiently expended light absorption towards visible region, and the confined growth of IL-CuCQDs-F within the TiO 2 inverse opal cavity achieved the photoelectric conversion and efficient CO 2 capture. Moreover, their Ti F bonding interface of IO-CFTi assisted photogenerated electron transportation from TiO 2 to CO 2 for its reduction in this system. Consequently, IO-CFTi achieved a substantially increased CO production rate of 78.1 μmol·h −1 ·g −1 with 98 % selectivity. This improved performance in CO 2 photoreduction positions the nanocomposite as a promising material for preservation of the environment and conversion of energy.
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Xiandie Zhang,Zhijie Fan,Heng Xu,Haozhe Li,Chongqing Deng,Xueqin Yang,Xiang Zhou,Xiaode Guo
In this work, NH 4 CuF 3 is utilized as the metal fluorine source and P(VDF-HFP) as the organic fluorine source to fabricate the Al-NH 4 CuF 3 @P(VDF-HFP) ternary energetic thin film via electrospinning technology. The continuous encapsulation of the components Al and NH 4 CuF 3 by P(VDF-HFP) endows the Al-NH 4 CuF 3 @P(VDF-HFP) composite with excellent hydrophobic properties and acid-alkali corrosion resistance, providing Al and NH 4 CuF 3 with anti-aging performance and stability in extreme environments. Additionally, the reaction performance of the Al-NH 4 CuF 3 @P(VDF-HFP) ternary reaction system is analyzed. The results indicate that the Al-NH 4 CuF 3 @P(VDF-HFP) ternary reaction system combines the performance advantages of both the Al-NH 4 CuF 3 and Al-P(VDF-HFP) binary reaction systems, namely low-temperature reaction and a high reaction rate. It is confirmed that the application of the double-F strategy can obtain an Al-NH 4 CuF 3 @P(VDF-HFP) combustion system with a high reaction rate, high ignition sensitivity, and high combustion efficiency. The combustion mechanism of composites is revealed by the analysis of gaseous and condensed products and performance analysis of reaction process. The aim of this study is to integrate the advantages of metal fluorine and organic fluorine to enhance the reaction properties of Al-based energetic composites.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHYSICS D-APPLIED PHYSICS
·
2024
·Vol. 58
·期 8
·085203
·
IF 3.1
Min Li,Qi Liu,Haonan Tian,Jianqiao Ma,Jun Xie
According to the problem that the performance of film capacitors is limited due to the poor insulation of polypropylene (PP) film, a new nano-filler was studied and a PP composite dielectric was fabricated. The breakdown strength of composite dielectrics was measured and the mechanism for improving their insulation properties was analyzed. In this paper, TiO2 with high dielectric constant is plasma-treated and then coated with a layer of PP shell. TiO2 increases the dielectric constant of PP film composite dielectrics, and shell-like PP makes TiO2 more tightly bound to the PP matrix. Compared with pure PP, the breakdown voltage of TiO2–F is increased by 18.7%, and the breakdown voltage of TiO2–F@PP-mah is increased by 40.5%, and the new nano filler greatly improves the insulation performance of PP. The experimental results show that TiO2 introduces a low-density trap, TiO2–F introduces a high-density deep trap, and the modification of PP-mah slows down the dielectric constant conflict, increases the compatibility between the nanoparticles and the matrix, and increases the trap energy level. Based on the analysis of experimental results with different mass fractions, this paper proposes the optimal filling ratio of the new core-shell, which provides a new method for the composite dielectric to improve the insulation performance.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE
·
2025
·
IF 3.6
Yuheng Zhang,Xin Wang,Nan Chen,Xuezhong Gong,Yao Wang,Olga Grigoryeva,Jun Li,Ihor Rusetskyi,Mykhailo Danilov,Alexander Fainleib,Petro Stryzhak,Jianguo Tang
Cyanate ester resin (CER) is an excellent thermosetting polymer. However, its brittleness and poor mechanical properties limit its application. The innovation of this work lies in the smart collaborative toughening effects of Eu 3+ /Tb 3+ @uCNTs working together with phenolphthalein polyether sulfone (marked as PES-C) on dicyanate ester of bisphenol F. Tb 3+ -complex enhances Eu 3+ @uCNT-effects, and the cooperation of PES-C together with Eu 3+ -Tb 3+ @uCNTs (marked as ET-uC) functions strongly to increase flexural, tensile, and impact strengths by 209%, 120%, and 286%, respectively. When additions of ET-uC ratio at 0.6 wt% and PES-C ratio at 15% to CER. At the same time, we can get more multiple enhancing effects can be observed as below. The introduction of ET-uC reduces the curing temperature of the composite material from 342°C to 271°C. At the same time, the mass loss rate decreased from 87% to 55%. The intensity of luminescent CER/ET-uC/PES-C is much stronger compared to CER/ET-C/PES-C. If the curing temperature is 250°C, the luminescence lifetimes of CER/ET-C/PES-C and CER/ET-uC/PES-C become 411.23 and 731.91 μs, respectively. These strong data confirm that our strategy of ET-uC collaborating with the linear thermal stable polymer of PES-C functions has generated the breakthrough to improve the comprehensive properties of CER. Graphical Schematic diagram of preparation of CER/ET-uC/PES-C composite material.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2025
·Vol. 36
·期 7
·1-15
·
IF 2.8
Shen Tao,Chen Hongxia,Fu Hu,Zhang Xinyu,Zhou Mengcheng,Xu Shuangwu,Hu Hanchi,Li Haichen,Zhou Hongming
P2-type layered transition metal oxides with high theoretical specific capacity and operating voltage are considered as one of the highly promising cathode materials for sodium-ion batteries, but the poor cycling stability attributed to the P2-O2 phase transition and Na + /vacancy ordering limits their practical applications. In this paper, a hydrothermal method is used to investigate the improvement of the electrochemical properties of Na 0.75 Ni 0.33 Mn 0.67 O 2 by Zn/F synergistic doping. The synergistic modification of Zn/F not only adjusts the valence distribution of Mn and improves the specific capacity, but also suppresses the phase transition under high voltage and the dissolution of transition metal ions. In particular, Na 0.75 Ni 0.23 Mn 0.67 Zn 0.1 O 1.95 F 0.05 (ZF-5) has excellent cycling performance (82.1% capacity retention after 100 cycles at 1C), compared to just 11.6% for the Na 0.75 Ni 0.33 Mn 0.67 O 2 (ZF-0). Above that, the rate performance is also significantly improved, with the specific capacity reaching 94.7 mAh g −1 even at a high current density of 5 C. Therefore, the Zn/F double doping modification strategy provides a simple and effective method for designing high-performance layered oxide cathode materials.
✓ 已验证
产品关联
DOI
高影响因子
Marine Drugs
·
2025
·Vol. 24
·期 1
·10
·
IF 5.4
Xin Mu,Xinxin Yang,Jian Jiao,Ming Du,Zhenyu Wang
Sea cucumber peptides have been shown to possess a number of functions, including antioxidant, anti-inflammatory, anti-tumor, and anti-fatigue effects, as well as immune regulation and promotion of collagen synthesis. Among these, high F-value oligopeptides are a promising natural active ingredient demonstrating excellent anti-fatigue effects. This study utilized fresh sea cucumbers as the primary raw material, employing membrane separation technology to investigate the simultaneous separation of sea cucumber polysaccharides and peptides. The process for removing aromatic amino acids during the preparation of high F-value oligopeptides from sea cucumbers was optimized, and the mechanism underlying their anti-fatigue effects was explored. A two-step enzymatic hydrolysis method using neutral protease and composite flavor protease was employed, followed by membrane separation using a 10,000 Da molecular weight ultrafiltration membrane, yielding a sea cucumber peptide yield of 45.00 ± 0.12% and a sea cucumber polysaccharide yield of 51.28 ± 0.63%. Following the removal of aromatic amino acids by means of activated carbon adsorption, the F-value of the high-F-value oligopeptides attained 23.82, with a yield of 24.56%. The experimental findings demonstrated that high-F-value oligopeptides exhibited a substantial increase in the swimming duration of mice and a notable enhancement in their grip strength. These observations signified their substantial anti-fatigue potential. Furthermore, studies have indicated that sea cucumber high-F-value oligopeptides reduce metabolites produced by exercise, enhance muscle protection, increase the activity of antioxidant enzymes in the body, and alleviate fatigue, thereby achieving an anti-fatigue effect.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today Communications
·
2022
·
IF 3.662
Weidong Li,Qiuyi Chen,Dongyun Zhang,Chen Fang,Song Nian,Wenxu Wang,Cong Xu,Chengkang Chang
Aiming for promoting the capacity and cycling stability of O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM), the cathode material of sodium ion batteries (SIBs) with the most potential for industrialization, Na(Ni 1/3 Fe 1/3 Mn 1/3 ) 0.99 Mo 0.01 O 1.99 F 0.01 (NFM-MoF), Na(Ni 1/3 Fe 1/3 Mn 1/3 ) 0.99 Mo 0.01 O 2 (NFM-Mo) and NaNi 1/3 Fe 1/3 Mn 1/3 O 1.99 F 0.01 (NFM-F) were successfully synthesized by solid phase method. The electrochemical performance of the doped samples was compared with that of the pristine NFM. The mechanism of the single- or dual-doping was explored by XRD Rietveld refinement and XPS. The NFM-MoF exhibits the highest initial specific discharge capacity of 137mAhg −1 at 1 C with a retention of 91.97% after 100 cycles and the smallest polarization (0.32 V), which could be contributed to the highest Ni 2+ content and highest D Na + (7.335 ×10 −13 cm 2 ·s −1 ) caused by the synergistic effect of Mo and F dual-doping. The highest Fe 3+ content in the NFM-Mo leads to the higher initial discharge capacity of 1 36 mAhg −1 at 1 C with a relative lower retention of 83.38%, which is due to the structure instability resulting from Fe migration and the lowest Mn content, than that of the NFM-F (85.31%). It illustrates that the Mn 4+ plays a crucial role in stabilizing the structure during Na + migrating. The superiority of the discharge capacity of the NFM-Mo become narrow with rates rise, due to its lower D Na + (4.229 ×10 −13 cm 2 ·s −1 ) than that of the NFM-F D Na + (5.681 ×10 −13 cm 2 ·s −1 ). It verifies that it is a diffusion control process at high rates. Mo and F dual-doping in NFM was proved to amplify the benefit of Ni 2+ increasing, meanwhile restrain undesirable Fe increasing due to the synergistic effect.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Zihan Yang,Jingkai Yang,Lixia Li,Wanning Cao,Jiao Zhang,Hongli Zhao,Liqin Wang
The challenge of creating effective S-scheme visible-light photocatalysts persists due to the inactive visible-light-driven component and the low band-gap characteristics of semiconductors. In this work, we developed a novel F-BiVO 4 /g-C 3 N 4 /CdS dual S-scheme photocatalyst using a sonochemical method. The removal efficiency of Cr(VI) and ciprofloxacin (CIP) can reach 98 % and 90 % in 5 min and 30 min, respectively, under simulated solar illumination. The excellent photocatalytic activity can be attributed to the efficient carrier separation and transport with the help of internal electric field at the interface. This work also reveals the reduction process of Cr(VI), as well as the intermediates and pathways involved in the CIP degradation, taking into account practical situations and expanding its potential applications. This research presents promising prospects for the design of bismuth-based dual S-scheme heterojunctions in the field of environmental remediation.
✓ 已验证
DOI
高影响因子
Catalysts
·
2024
·Vol. 14
·期 10
·735
·
IF 3.8
Lu Qiu,Hanliang Li,Wenyi Xu,Rongshu Zhu,Feng Ouyang
The organic pollutants discharged from industrial wastewater have caused serious harm to human health. The efficient photocatalytic degradation of organic pollutants under sunlight shows promise for industrial applications and energy utilization. In this study, a modified TiO2photocatalyst doped with bismuth (Bi) and fluorine (F) and composited with SnO2and SiO2was prepared, and its performance for the degradation of Rhodamine B (RhB) under simulated sunlight was evaluated. Through the optimization of the doping levels of Bi and F, as well as the ratio of SnO2and SiO2to TiO2, the optimal catalyst reached degradation efficiency of 100% for RhB within 20 min under simulated sunlight, with a first-order reaction rate constant of 0.291 min−1. This value was 15, 41, 6.5, and 3.3 times higher than those of TiO2/SnO2, Bi/TiO2, Bi-TiO2/SnO2, and F/Bi-TiO2/SnO2, respectively. The active species detection showed that h+was the most crucial active species in the process. The role of Bi and F addition and SnO2-SiO2compositing was investigated by characterization. Bi formed a chemical bonding with TiO2by doping into TiO2. The absorbance intensity in the UV and visible light regions was improved by SnO2and F modification. Composite with SiO2led to a larger surface area that allowed for more RhB adsorption sites. These beneficial modifications greatly enhanced the photocatalytic activity of the catalyst.
✓ 已验证
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2014
·
IF 4.517
Jian Xu,Shaobo Sun,Qian Li,Ying Yue,Yingdong Li,Shijun Shao
A novel probe incorporating quaternized 4-pyridinium group into a BODIPY molecule was synthesized and studied for the selective detection of fluoride ions (F − ) in aqueous solution. The design was based on a fluoride-specific desilylation reaction and the “Turn-On” fluorescent response of probe 1 to F − was ascribed to the inhibition of photoinduced electron transfer (PET) process. The probe displayed many desired properties such as high specificity, appreciable solubility, desirable response time and low toxicity to mammalian cells. There was a good linearity between the fluorescence intensity and the concentrations of F − in the range of 0.1–1 mM with a detection limit of 0.02 mM. The sensing mechanism was confirmed by the NMR, electrospray ionization mass spectrum, optical spectroscopy and the mechanism of “Turn-On” fluorescent response was also determinated by a density functional theory (DFT) calculation using Gaussian 03 program. Moreover, the probe was successfully applied for the fluorescence imaging of F − in human epithelial lung cancer (A549) cells and alveolar type II (ATII) cells under physiological conditions.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2021
·Vol. 11
·期 56
·35215-35227
·
IF 3.361
Yue Jian,Huayang Liu,Jiaming Zhu,Yaqiong Zeng,Zuohua Liu,Chentao Hou,Shihua Pu
Photocatalytic degradation is an eco-friendly and sustainable method for the treatment of water pollutants especially tetracycline hydrochloride (TCH). Herein, we developed F-doped H2Ti3O7-{104} nanorods with oxygen vacancies using TiOF2 as a precursor by simple alkali hydrothermal and ion-exchange methods. The phase structure, surface composition, optical properties, specific surface areas and charge separation were analysed by a series of measurements. The effects of KOH concentration on the structure and properties of H2Ti3O7 were investigated. It is confirmed that the TiOF2/H2Ti3O7 composite can be formed in low concentration KOH solution (1 mol L−1), while the H2Ti3O7 single phase can be formed in high concentration KOH solution (>3 mol L−1). The prepared F-doped H2Ti3O7-{104} nanorods provide a high specific surface area of 457 m2 g−1 and a macroporous volume of 0.69 cm3 g−1. The appropriate mesoporous structure of the photocatalyst makes TCH have a stronger affinity on its surface, which is more conducive to the subsequent photodegradation. Moreover, a synergistic mechanism of photosensitization and ligand–metal charge transfer (LMCT) in the photocatalytic degradation of TCH was proposed. In addition, the prepared F-doped H2Ti3O7-{104} nanorods showed excellent cycle stability and resistance to light corrosion. After five cycles of photodegradation, the degradation rate of TCH was only reduced from 92% to 83%. This low-cost strategy could be used for the mass production of efficient photocatalysts, which can be used for TCH clean-up in wastewater treatment.
✓ 已验证
DOI
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2025
·
IF 4.6
Wei Gao,Hao Hu,Jinkun Xue,Yongrun Dong,Wen Li,Xia Zhao,Xiang Mao,Zequan Li
Carbon dots (CDs) have attracted considerable interest as fluorescent nanomaterials; however, their long-afterglow emission properties remain underexplored. In this study, we synthesized dual-mode afterglow CDs exhibiting room-temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) via fluorine-sodium (F, Na) co-doping, achieving an extended afterglow lifetime of 574 ms. Under 365 nm UV excitation, the afterglow emission persists for 14 s (naked-eye observation) and 40 s (instrumentally quantified), demonstrating exceptional temporal resolution. Na doping enhances afterglow intensity by 11.3 %, while fluorine doping reduces the singlet–triplet energy gap (ΔE ST ) to 0.036 eV, facilitating efficient Reverse Intersystem Crossing and enabling TADF behavior. These synergistic effects position the developed CDs as promising candidates for anti-counterfeiting systems, multilevel data encryption, and high-security optical tagging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）