文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3733至3744个,产品总数4,488个

切换升序
Cu
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Synergistic multiscale layered solar evaporator: Combining PAN/Cu-modified carbon fiber paper and delignified cellulose bulk for efficient solar energy utilization

Xiangkun Guo,Yinchao Xu,Andong He,Daliang Guo,Lizheng Sha,Tianzhong Yuan,Donghao Hu

Solar energy presents a promising solution for water purification, but high costs, size limitations, and scalability issues often hinder the development of efficient three-dimensional solar evaporators. To address these challenges, we introduce a novel and practical approach to fabricating a multiscale layered solar evaporator, with a key innovation being the incorporation of delignified cellulose bulk (DCB). This unique component, characterized by its high porosity and hydrophilic properties, plays a crucial role in significantly enhancing the solar evaporator's water absorption capacity and water transport efficiency. By leveraging the exceptional properties of DCB, our design achieves enhanced performance in solar-driven water evaporation and desalination systems. To further optimize the solar evaporator's performance, we employed a two-step process involving the electroplating of Cu onto carbon fiber paper (CP) and the subsequent polymerization of polyaniline (PAN). This resulted in a CP@Cu-PAN-based solar absorber with outstanding photothermal conversion performance. Outdoor studies demonstrated the superior performance of our solar evaporator, with stable desalination capability and consistent operation. Incorporating DCB enables efficient water transport and absorption, enhancing solar-driven water evaporation. This scalable method offers a new strategy for assembling composite materials, highlighting DCB's potential as a critical component in innovative water purification systems.

CAS / MDL: 62-53-3 64-17-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

ZIF-derived non-bonding Cu/Zn catalysts-driven peroxymonosulfate activation via selective generation of surface-bound radicals for efficient water purification

Renli Yin,Xiaoyue Zhou,Yingxi Shi,Jieyun Bai,Adela Jing Li,Junhao Qin,Rongliang Qiu

The peroxymonosulfate-based advanced oxidation processes (PMS-AOPs) have been extensively studied in wastewater treatment due to their ability to generate various reactive oxygen species. However, the ultra-short half-lives of free radical species limit their effective transfer from the catalyst surfaces to the target organic contaminants for efficient decontamination. Thus, directed production of reactive species with longer lifetimes is challenging but belong with significant demand. In this study, a catalyst with neighboring Cu and Zn heteroatoms pairs anchored on the surface of zeolitic imidazolate framework (Cu/Zn-ZIF) was designed to selectively and sustainably generate radicals via PMS activation. Electron energy-loss spectroscopy (EELS) demonstrated the formation of non-bonding Cu-Zn heteroatom pairs. Owing to the synergistic effect of the Cu and Zn heteroatoms, the Cu/Zn-ZIF/PMS system achieved 99.5 % removal rate of bisphenol A (BPA) within 60 min. Therein, PMS was stabilized by the strongly adsorptive Cu/Zn-ZIF and activated within the nanoscale confinement of Cu sites, resulting in the directional generation of surface-bound • OH and SO 4 •− radicals with longer lifetimes, which facilitated the efficient removal of BPA. Significantly, it also demonstrated robust resilience against disruptions caused by intricate aquatic environments, including freshwater bodies and ionic species. These findings provide reference for theoretical research on the design of functional MOFs materials and the practical application of surface-bound radicals in AOPs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2024 · IF 7.4

Vacancy-strengthened Cu/Co composite oxides for efficient removal of methylene blue via peroxymonosulfate activation: Synergism of multiple Lewis acid sites

Wanqi Zhang,Runchen Zhu,Fakang Pan,Chao Xie,Junyong He,Zijian Wu,Yulian Li,Yahui Li,Jiandong Lu,Peidong Hong,Lingtao Kong

The development of suitable catalysts poses a challenge for the peroxymonosulfate (PMS) activation system used in decontamination process. Here we constructed a series of vacancy-strengthened Cu/Co composite oxides (CuCoO) composed of CuCo 2 O 4 and CuO containing multiple Lewis acid sites. The results demonstrate that the as-prepared CuCoO-2 exhibited exceptional activation performance, broad-ranging degradation capacity, remarkable reusability and stability. The optimized CuCoO-2+PMS system achieved complete removal of methylene blue (MB) in 40 min, while maintaining a degradation efficiency of above 86 % even after 5 cycles. A comprehensive survey revealed that hydroxyl radical (·OH), sulfate radical (SO 4 .- ) and singlet oxygen ( 1 O 2 ) collectively contribute to the degradation of MB in the CuCoO-2+PMS system. Especially, 1 O 2 was the dominant active species. The synergism of various Lewis acid sites (Cu +/2+ , Co 2+/3+ and V O/N ) as unsaturated surface-bound centers played a pivotal role in promoting non-radical-driven activation of PMS. Meanwhile, the generated V O/N facilitated enhanced metallic valence circulation in CuCoO-2, strengthening electron mediation between PMS and MB. Additionally, possible degradation pathways and toxicity evaluations of MB and its intermediates were proposed. In conclusion, this work offers valuable insights into PMS activation by vacancy-strengthened CuCoO and is of great significance for water purification.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2024 · IF 9.4

Synthesis of MoS2@MoO3/(Cu+/g-C3N4) ternary composites with double S-scheme heterojunction for peroxymonosulfate activation exposing to visible light

Chuangbin Hong,Wenguang Wang,Liangpeng Wu,Jiehang Zhou,Shimin Long,Wentao Zhou,Yuxi Guo

The construction of semiconductor heterojunction is an effective way for charge separation in photocatalytic degradation of pollutants. In this study, a novel MoS 2 @MoO 3 /(Cu + /g-C 3 N 4 ) ternary composites (MMCCN) was prepared via a simple calcination method. The as-prepared composites exhibited exceptional performance in activating peroxymonosulfate (PMS) for the degradation of rhodamine B (RhB). The activity testing results indicated that 99.41 % of RhB (10 mg·L −1 , 10 mL) was effectively removed by the synergistic effect of composites photocatalyst (0.1 g·L −1 ) and PMS (0.1 g·L −1 ) under visible light irradiation for 40 min. Its reaction rate constant exceeded that of Cu + /g-C 3 N 4 , MoO 3 and MoS 2 by a factor of 3.56, 17.30 and 11.73 times, respectively. The crystal structure, band gap and density of states (DOS) of the semiconductors were calculated according to the density functional theory (DFT). Free radical trapping tests and electron spin resonance spectroscopy validated that 1 O 2 , O 2 − and h + are primary reactive species participating in the decomposition of RhB. The ternary composites demonstrated good stability and maintained excellent degradation efficiency even across four reaction cycles. Furthermore, the activation mechanism and the intermediates produced during the decomposition course of RhB by MMCCN/PMS/vis system were analyzed and elucidated. A double S-scheme heterojunctions was responsible for efficient separation of photo-induced electron-hole pairs. This work presents a novel method in the construction of double S-scheme heterojunctions for PMS activation which is expected to find wide applications in wastewater treatment and environmental remediation.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2024 · IF 8.1

Suppressed O3–P3 phase transition of Cu/Fe/Mn-based layered oxides as cathode materials for high performance sodium-ion batteries

Yang Yang,Honghao Deng,Liying Liu,Jiahong Pan,Ping Chen,Zhicong Shi

O3-type Cu/Fe/Mn-based layered oxides are regarded as promising cathode materials for sodium-ion batteries due to the abundance of elements in the Earth's crust and the imperative for large-scale energy storage. However, these materials still encounter some challenges, including low capacity and insufficient rate performance. In this study, Al-doped, cobalt-free, and nickel-free Na 0.9 Cu 0.18 Fe 0.3 Mn 0.52-x Al x O 2 (x = 0, 0.03, 0.05, 0.08) are successfully synthesized by using the solid-state method to introduce non-electrochemically active elements to stabilize the crystal structure and enhance the electrochemical performance. The impact of Al-doping is comprehensively analyzed by using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), galvanostatic intermittent titration technique (GITT), and electrochemical impedance spectroscopy (EIS). Al-doping effectively enhances the diffusion coefficient of Na + , reduces the Jahn-Teller effect caused by Mn 3+ and mitigates the transition from O3 to P3 phase. Finally, it stops the partial phase transitions from O3 to P3, which can be found in pristine oxide without Al-doping during charge-discharge cycling. Notably, the Na 0.9 Cu 0.18 Fe 0.3 Mn 0.47 Al 0.05 O 2 electrode exhibits a reversible capacity of 123.89 mAh g −1 at 0.1 C, a capacity retention rate of 91.1 % after 200 cycles at 1 C, and a discharge capacity of 66.36 mAh g −1 at a high rate of 5 C.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Small · 2025 · IF 12.1

Achieving High Carrier Mobility of Fe-ZnO and Cu-ZnO Laminated Homo-junction Nanofilm for Rapid and Highly Effective Photocatalytic Sterilization

Guangrong Qian,Renyuan Deng,Xiangmei Liu,Yi Wang,Jin Huang,Congyang Mao,Chaofeng Wang,Hanpeng Liu,Zhaoyang Li,Shengli Zhu,Hui Jiang,Zhenduo Cui,Yufeng Zheng,Shuilin Wu

The transmission of pathogenic bacteria via the contaminated surfaces of interactive touchscreens is an important route of infection. It is therefore imperative to develop a functional film with antibacterial properties to prevent cross-infection. In this paper, a bilayer thin-film structure composed of iron-doped and copper-doped zinc oxide (Fe-ZnO/Cu-ZnO) is synthesized through a spin coating technique based on sol-gel. The synergistic effects of metal ion doping, combined with the influence of the internal electric potential, during the photocatalytic reaction process, promote the separation and migration of photogenerated carriers. As a result, it notably boosts the photocatalytic properties. The nanofilm is demonstrated to achieve a rapid bactericidal effect (surpassing 90%) under sunlight irradiation. Furthermore, it is shown to completely kill bacteria after 20 min of illumination and to maintain excellent antibacterial performance (surpassing 90%) for a period of 30 days. Concurrently, the thin film displays both exceptional light transmittance (surpassing 90%) and noteworthy benefits, including environmental sustainability, cost-effectiveness, and the capacity for safe disinfection. The thin film exhibits considerable potential for implementation on surfaces subject to high-frequency public contact. It boasts extensive application prospects and serves as a foundational reference for the design of photocatalytic antibacterial thin films.

CAS / MDL: 768-66-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2025 · IF 9.8

Cu,Fe,B/Cur-CDs with peroxidase- and ascorbic acid oxidase-like catalytic activity for dual-signal fluorescence sensing of metronidazole

Linqian Hou,Qiulan Li,Jitao Li,Dezhi Yang,Yaling Yang

A curcumin based iron, copper and boron doping carbon dots (Cu,Fe,B/Cur-CDs) with ascorbic acid oxidase (AAO)- and peroxidase (POD)-like activities were synthesized via microwave digestion. The Cu,Fe,B/Cur-CDs oxidize ascorbic acid (AA) to dehydroascorbic acid (DHAA), which reacts with o -phenylenediamine (OPD) to generate fluorescent 3-(1,2-dihydroxyethyl) furo [3,4-b]quinoxaline-1-one (DFQ). Simultaneously, it catalyzes OPD/H₂O₂ to fluorescent 2,3-diaminophenazine (DAP) via POD-like activity. In the presence of metronidazole (MNZ), it induces competitive inhibition by competing with OPD for the active sites of Cu, Fe, B/Cur-CDs. This reduces the generation of •OH and •O₂ − radicals, hindering the oxidation of OPD to form DAP and thus decreasing the system's fluorescence intensity. Additionally, MNZ quenches the fluorescence of DFQ at 420 nm via the inner filter effect. Therefore, a dual-signal fluorescence sensor for MNZ detection was constructed. The sensor achieved 91.6–109.9 % and 86.2–116.2 % recovery in food samples using standard addition, demonstrating high sensitivity for dual-signal detection systems.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Acta Metallurgica Sinica-English Letters · 2025 · IF 3.9

Simultaneous Enhancement in Mechanical and Physical Properties of Boron Nitride Nanosheet/Cu–Ni Composites Enabled by In Situ CVD-Assisted Processing

Sun Siyu,Zhu Shaoqiang,Zhang Xiang,Zhao Dongdong,Rong Xudong,He Chunnian,Zhao Naiqin

The rapid expansion of marine industries has created an urgent demand for advanced engineering materials with superior multifunctional performance. While Cu–Ni alloys demonstrate favorable stability and tribological characteristics, their practical applications are constrained by compromised thermal conductivity and insufficient mechanical strength due to the solid solution of a high amount of Ni in the Cu matrix. Cu–Ni matrix composites reinforced with hexagonal boron nitride (h-BN) have garnered significant attention due to their potential for tailored mechanical and thermal properties. However, challenges such as BN agglomerations in Cu–Ni matrix and poor interfacial bonding hinder their practical applications. To address these limitations, this study proposes an innovative fabrication strategy for boron nitride nanosheets (BNNSs) reinforced Cu–Ni composites by integrating the in situ synthesis of BNNSs on Cu powders via chemical vapor deposition with powder metallurgy. Benefited by the in situ strategy, BNNSs with high crystallinity distribute uniformly within the Cu matrix and have an intimate interfacial bonding without voids or other types of defects. Remarkably, the BNNSs/Cu-30%Ni composite achieves simultaneous enhancement in strength and ductility, exhibiting an ultimate tensile strength of 417 MPa and fracture elongation of 17.5%, representing 30% and 118% improvements over pure Cu–Ni alloys, respectively. This exceptional mechanical synergy originates from threefold strengthening mechanisms: grain refinement, mobile dislocation pinning, and efficient stress transfer via robust interfaces. The microstructural analysis confirms that homogenous distribution of BNNSs optimized stress distribution, mitigating strain localization in the composites. Fractographic examination demonstrates uniformly distributed dimples containing embedded BNNSs, indicative of effective crack bridging and deflection during failure. Furthermore, the composite possesses excellent corrosion resistance comparable to matrix alloys, while achieving 21.23% enhancement in thermal conductivity and 20% reduction in coefficient of friction. The scalable fabrication protocol successfully resolves longstanding challenges in BNNSs dispersion and interfacial bonding, offering a viable pathway for designing high-performance CMCs for marine applications.

CAS / MDL: 1303-86-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Catalysis Science & Technology · 2025 · IF 4.2

Reactive Black 5 elimination via Cu(II)-induced sodium percarbonate process: Box-Behnken design, mechanism profiling, application performance, and energy boosting

Fan Bai,Yanjiao Gao,Yongbo Xiao,Jing Xiao

The utilization of sodium percarbonate (SPC, Na₂CO₃·1.5H₂O₂) as an alternative to H₂O₂ for degrading recalcitrant organics in advanced oxidation is emerging due to SPC’s stability, safety, and pH adaptability. This study innovatively employed Cu(II)-activated SPC to remove reactive black 5 (RB5), focusing on Box-Behnken design (BBD), mechanism profiling, application performance, and energy boosting. BBD and response surface methodology optimized conditions (2.592 mM Cu(II), 0.022 mM SPC, pH 7.18) achieved 90.08% RB5 removal (R² = 0.9997, prediction error < 1%), with the model showing strong predictive capability. Quenching experiments and liquid chromatography-mass spectrometry (LC-MS) revealed that 1O2, O2•−, and CO3•− were the main active species in oxidizing RB5 through three possible pathways. Cl⁻, SO₄²⁻, NO₃⁻, and HCO₃⁻ (0.1-5.0 mM) contained in the ultrapure water did not inhibit RB5 removal in the Cu(II)/SPC system, and the Cu(II)/SPC could remove 76.1% of RB5 in industrial wastewater, demonstrating the potential for practical application of this system. The application of energy (heating, ultraviolet light, ultrasound) significantly improved the effectiveness of the Cu(II)/SPC system in degrading RB5; thus, these means can be used to assist in the activation of SPC in real dye wastewater treatment. This work provides theoretical and practical insights for SPC-based advanced oxidation processes.

CAS / MDL: 7758-99-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry B · 2025 · IF 5.7

A dual-network supramolecular hydrogel dressing encapsulating Cu/EGCG nanoenzyme and glucose oxidase for closed cascade catalytic therapy of diabetic wounds

Wenli Yu,Zengzhe Liu,Shihua Mao,Lijun Hu,Yue Xi,Gaopeng Wang,Guoli Yang,Jintao Yang

Poor diabetic wound healing represents a significant threat to public health. Key obstacles include heightened oxidative stress resulting from the hyperglycemic microenvironment and increased susceptibility to bacterial infections. These factors synergistically exacerbate one another, creating a self-perpetuating cycle that hampers healing. Despite advancements in wound care, developing effective strategies to simultaneously mitigate these interconnected issues and disrupt the detrimental loop remains a critical challenge. Herein, we developed a multifunctional hydrogel dressing (PACN@CG) with glucose-depleting, reactive oxygen species (ROS)-scavenging and antibacterial properties, consisting of a double-network hydrogel, copper-based nanoenzyme and glucose oxidase (GOx), forming a combination therapy system for diabetic wound treatment. The integration of covalent and non-covalent bonds within the hydrogel endows it with a range of exceptional properties, including injectability, mechanical robustness, self-healing capability, strong biological adhesion, and biodegradability. The synergistic cascade enzyme system formed by the nanoenzyme and GOx enables self-regulated glucose depletion and ROS scavenging, thereby modulating the diabetic microenvironment while enhancing antibacterial efficacy. The efficacy of the PACN@CG hydrogel in enhancing diabetic wound healing was demonstrated using full-thickness skin wound models in diabetic mice. Consequently, this hydrogel dressing successfully reestablishes tissue redox homeostasis and promotes wound healing, presenting a highly promising approach for the treatment of diabetic wounds.

CAS / MDL: 30525-89-4 67-68-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2025 · IF 2.5

Conversion of Fe2O3 from n to p type via transition metal (Cu, Zn) doping for preparation of high-performance acetone sensor

Qixuan Qin,Yizhuo Fan,Wei Wang

In this work, Fe2O3 nanocubes doped with different amounts of transition metals (Cu, Zn) were prepared by hydrothermal synthesis and annealing method. Gas sensing performance tests show that the prepared pristine Fe2O3 exhibits the conductive property of an n-type material, while Cu&Zn doped Fe2O3 exhibit p-type conductive property. The sensors based on 5 at% Cu&Zn doped Fe2O3 showed significantly improved response, selectivity, long-term stability, and moisture resistance to acetone compared to the pristine Fe2O3 nanocubes. X-ray photoelectron spectroscopy (XPS) results confirmed that the adsorbed oxygen of 5 at% Cu&Zn doped Fe2O3 were significantly higher than that of the pristine Fe2O3, which is the main reason for the improved gas sensing performances. Therefore, this study provides an effective way to develop low-cost and high-performance gas sensors based on transition metal-doped metal oxide.

CAS / MDL: 1336-21-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2025 · IF 8.5

Bioorthogonal chemistry-inspired Cu/5-aminolevulinic acid self-assembled nanoparticles-crosslinked in situ hyaluronic acid hydrogel for chemo-photodynamic tumor therapy

Xiaonan Qiu,Jiaying Liu,Li Song,Huijun Yu,Yunchao Wu,Qinxin Wang,Mengke Lu,Xuan Gu,Baoding Chen,Miaomiao Zhang,Fengyi Du

Bioorthogonal chemistry-based cancer therapy greatly reduces the side effects of chemotherapy drugs; however, complicated and expensive procedures limit its clinical application. Disulfiram (DSF), an FDA-approved anti-alcoholic drug, can combine with copper to form a DSF‑copper complex with remarkable tumor-killing effects. Inspired by the bioorthogonal chemistry, we fabricated an in situ crosslinked self-adaptive hyaluronic acid hydrogels (Cu-A/P@PH HGs) via a dynamic boronic ester bond-based reaction between Cu/5-aminolevulinic acid (5-ALA) self-assembled nanoparticles containing PVA (Cu-A/P NPs) and phenylboronic-grafted hyaluronic acid (PH). The prepared Cu-A/P@PH HGs exhibited favorable self-healing performance and ROS-responsive degradation. Upon in situ injection, the Cu-A/P NPs endowed the Cu-A/P@PH HGs with the ability to convert non-toxic DSF into cytotoxic diethyldithiocarbamate (CuET) at the desired tumor site. In addition, under the induction of glutathione (GSH), Cu-A/P NPs gradually released 5-ALA, which was specifically converted into protoporphyrin IX (PpIX) (a photosensitizer) in tumor cells, resulting in irreversible ROS-mediated oxidative damage under 660 nm laser exposure. Our study offers a promising bioorthogonal chemistry-inspired strategy for in situ photodynamic therapy and DSF chemotherapy to treat breast cancer.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。