TRANSACTIONS OF TIANJIN UNIVERSITY
·
2020
·Vol. 26
·期 6
·470-478
·
IF 0
Xu Rongjie,Xu Hua,Ning Shangbo,Zhang Qiqi,Yang Zhongshan,Ye Jinhua
Visible light photocatalytic CO 2 conversion is a promising solution to global warming and energy shortage. Herein, we build a well-designed bridge-like nanostructure, that is, the phosphonated Ru complex (RuP) light absorber–TiO 2 bridge–Cu catalyst. In this nanostructure, brookite TiO 2 serving as a bridge is spatially connected to the RuP and Cu on each of its sides and could thus physically separate the photoexcited holes and electrons over the RuP and Cu, respectively. Given its effective charge separation, this RuP–TiO 2 –Cu assembly exhibits superior CO 2 photoreduction activity relative to RuP–SiO 2 –Cu under visible light irradiation ( λ > 420 nm). The catalytic activity is further optimized by adopting brookite TiO 2 with various electronic band structures. Results reveal the rapid movement of electrons from the RuP through the conduction band of TiO 2 and finally to the Cu surface. This property is crucial in CO 2 photoreduction activity.
✓ 已验证
DOI
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 41
·20110-20120
·
IF 9.931
Jianhong Ma,Jinming Luo,Yutang Liu,Yuanfeng Wei,Tao Cai,Xingwen Yu,Hui Liu,Chengbin Liu,John C. Crittenden
A systematic study of the interaction between adsorbents and potentially toxic metal ions in multicomponent systems is of great significance due to the coexistence of multiple potentially toxic metal ions in the real water environment. In this study, a new humic substance-based double network hydrogel (PAA/HS gel) was produced by a radical polymerization method and applied to Pb(II), Cu(II) and Cd(II) removal in both individual and multicomponent systems under various conditions. The macroporous network structure (aperture ≈ 10 μm) and high water permeability of the PAA/HS gel could fully facilitate the active site exposure and increase the potentially toxic metal ion diffusion rate. The PAA/HS gel exhibited high theoretical adsorption capacities of 360.50, 151.00 and 412.76 mg g−1 for Pb(II), Cu(II) and Cd(II) in individual systems. Noticeably, both interference and promotion of adsorption behaviors were identified in multicomponent systems. In binary systems, the adsorption capacity and rate were decreased for Pb(II) and Cu(II), while increased for Cd(II). In ternary systems, the adsorption capacity and rate for Pb(II), Cu(II) and Cd(II) were decreased. The adsorption isotherms and kinetics were well fitted by Langmuir–Freundlich and Elovich models, respectively, indicating that the PAA/HS gel possessed a heterogeneous surface and various types of binding sites. The FTIR and XPS studies confirmed that both nitrogen- and oxygen-containing functional groups (i.e., amino, phenolic hydroxyl and carboxyl groups) were involved in the adsorption process, while the interactions between functional groups and Pb(II), Cu(II) and Cd(II) were different.
✓ 已验证
DOI
高影响因子
Polymers
·
2016
·Vol. 8
·期 4
·78
·
IF 2.944
Sheng Chen,Rui Ding,Xiuling Ma,Liqun Xue,Xiuzhu Lin,Xiaoping Fan,Zhimin Luo
In this article, reduced graphene oxide (RGO)/carboxymethyl chitosan (CMC) composites (RGO/CMC) were synthesized by a hydrothermal method throughin-situreduction and modification of graphene oxide (GO) in the presence of CMC. An electrochemical sensor for the determination of Cu(II) by differential pulse anodic stripping voltammetry (DPASV) was constructed by an electrode modified with RGO/CMC. The fabricated electrochemical sensor shows a linear range of 0.02–1.2 μmol·L−1, a detection limit of 3.25 nmol·L−1(S/N = 3) and a sensitivity of 130.75 μA·μmol·L−1·cm−2, indicating the sensor has an excellent detection performance for Cu(II).Keywords:graphene;carboxymethyl chitosan;sensor;differential pulse anodic stripping voltammetry;Cu(II)
✓ 已验证
DOI
PubMed
高影响因子
ELECTROANALYSIS
·
2021
·Vol. 33
·期 12
·2437-2444
·
IF 3.223
Pengcheng Ma,Xiaoyan Ma,Fang Chen
N-isopropylacrylamide was polymerized on the surface of copper-plated carbon paper electrode by a novel redox initiation system composed of persulfate and copper nanoparticles, and the PNIPAAm−Cu NPs@CP film electrode was obtained. Cyclic voltammetry (CV) results showed that the electrode exhibits a reversible temperature, pH and glucose switchable electrical signal response through the ferrocene carboxylic acid (Fc(COOH)). With this basis, a 4-current output logic gate system consisting of 3-response inputs of temperature, pH, and glucose was fabricated and a corresponding logic circuit for 3-input/4-output ports was established. This work might provide a new avenue for the development of multi-valued biologic systems.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2022
·Vol. 46
·期 25
·12372-12380
·
IF 3.925
Juan Chai,Luohao Yuan,Shiwei Wang,Tong Li,Mingxue Wu,Zhiwei Huang,Hongfeng Yin
Three metal–organic frameworks {[Cu6(L1)4(DMF)(H2O)2·5H2O]}n (1), {Cu3(L1)2(phen)2(H2O)}n (2) and {[Cu8(μ3-OH)3(L2)4(NO3)(H2O)5]·3H2O}n (3) utilizing nitrogen-containing heterocyclic carboxylate bifunctional ligands (L1 = 5-(4-carboxypyridin-3-yl)isophthalic acid and L2 = 2-(5-carboxypyridin-2-yl)terephthalic acid) were self-assembled hydrothermally and characterized. MOFs 1–3 possess 3D networks which consist of three different types of Cu clusters {Cu2O2(OCO)4}, {Cu2O2N4(OCO)2} and {Cu4O10(OCO)4}, respectively. MOFs 1–3 efficiently catalyze the oxidation of cycloalkanes under mild conditions. Besides, the synthesized MOFs 1–3 exhibited high peroxidase-like activity and could be utilized to catalyze the oxidation of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid ammonium salt) (ABTS) to produce green color in the presence of hydrogen peroxide (H2O2). The steady-state kinetics experiments of the oxidation of ABTS catalyzed by MOFs 1–3 were carried out, and the kinetic parameters were obtained. The results indicated that the affinity of MOFs 1–3 towards H2O2 and ABTS was higher than that of the natural horseradish peroxidase (HRP). The as-prepared MOF 1 can be applied for the colorimetric detection of H2O2 with a wide linear range of 0.5 to 200 μM and a limit of detection (LOD) of 0.097 μM. Therefore, the novel Cu-MOFs could be regarded as promising artificial enzyme mimics in catalysis, sensors and environment analysis.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2022
·Vol. 12
·期 11
·3670-3684
·
IF 6.177
Chunwang Lv,Mingjiang Hu,Tianhao Yuan,Liqiang Yan,Hongwei Chen
The objective of this work was to investigate and contrast the mechanism of different B-site dopants for catalytic activity and sulfur resistance under equivalent conditions. LaCo1−xMxO3 (M = Fe, Cr, Cu) perovskite-type catalysts were synthesized by a sol–gel method, and the optimized samples were tested for toluene oxidation before and after sulfur aging. The properties of the catalysts were investigated in detail by XRD, FT-IR, N2 adsorption–desorption, H2-TPR, XPS and in situ DRIFTS to elucidate the inner mechanisms of the catalytic reaction and poisoning processes. The results indicated that introducing specific metal cations with a suitable ratio into the B-site of perovskite could improve the catalytic activity and weaken the negative effect of SO2 poisoning. The reasons for the improvement of catalytic activity on different doped catalysts are similar and mainly lie in the change of reduction property, oxidation state of the B-site, and content of oxygen vacancies. However, the mechanism of sulfur resistance caused by different dopants is not identical. The introduction of different metal cations will cause certain differences in some factors such as reducibility, lattice stability, sulfur adsorption and sulfate content, thus leading to the differentiation of sulfur tolerance for doped perovskite catalysts. In this study, the optimization effect of Fe dopant is better than that of Cr and Cu dopants, illustrating that the high stability of the perovskite lattice and the insensitivity to sulfur species are the key factors for its outstanding sulfur resistance. The results provide insights into guiding the practical composition and life cycle optimization of perovskite-type catalysts in the industrial application of removing sulfur-containing VOCs.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2022
·
IF 9.224
Yingying Yang,Jingyu Xu,Yanzhu Guo,Xing Wang,Ling-Ping Xiao,Jinghui Zhou
Laccase is a highly versatile multicopper oxidase for lignin biodegradation. Using nanomaterials to realize functional laccase simulations is attractive for applications and fundamental research. Herein, this study reports a facile strategy to fabricate a Cu metal–organic framework (MOF) by using copper as a metal center with guanosine 5′-monophosphate (GMP) as organic ligands (Cu/GMP). This obtained catalyst exhibits excellent chemoselectivity for lignin depolymerization into oligomers with low molecular weights at room temperature and atmospheric pressure. It was found that Cu/GMP shows superior laccase-like activity, which is beneficial for the C–O bond cleavage within lignin, thus affording oligomers in a high yield (81.7 wt %). Furthermore, the effects of the obtained lignin oligomers on the oxidative stability of canola oil biodiesel were evaluated. They were novel, renewable, and of low cost, which as biodiesel additives exhibited high potential in replacing expensive merchand biodiesel antioxidants commonly used to date.
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2015
·Vol. 22
·期 8
·1-10
·
IF 1.92
Li Luzhong,Wang Zhu,Ma Piming,Bai Huiyu,Dong Weifu,Chen Mingqing
A novel bio-adsorbent, composite hydrogel beads, composed of polyvinyl alcohol (PVA), chitosan (CS) and graphene oxide (GO) was prepared by an instantaneous gelation method. The micromorphology and thermal stability of the PVA/CS/GO hydrogel beads were characterized by scanning electronic microscope (SEM) and thermo gravimetric analysis (TGA) respectively. Adsorption of Cu(II) onto PVA/CS/GO hydrogel beads was investigated with respect to pH, initial concentration, temperature and adsorption time. Adsorption data were well matched by Langmuir isotherm and pseudo-second-order kinetic model at the optimum pH 5.5. The maximum adsorption capacities of PVA/CS/GO hydrogel beads were found to be 162 mg g −1 for Cu(II) at 30 °C, which was much higher than that of PVA/CS hydrogel. Thermodynamic studies indicated that the adsorption was spontaneous and endothermic process in nature. Besides, desorption efficiency and reusability of the adsorbents were assessed on basis of six consecutive adsorption-desorption cycles. Based on these studies, it can be seen that PVA/CS/GO hydrogel beads will be a potential recyclable adsorbent for removal of hazardous metal ions in waste water.
✓ 已验证
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2022
·Vol. 414
·期 16
·4655-4666
·
IF 4.478
Gao Tiemei,Lian Huiting,Cao Xuegong,Liu Bin,Wei Xiaofeng
Multifunctional catalytic performance plays a crucial role in bio-applications through the diversity and durability of artificial nanozymes. An effective synergy with sufficient accessible active sites and high specific surface area is a challenge for composite catalysts, especially to avoid uncontrollable aggregation and structural instability. Here, we fabricated a Cu n O/Au heterostructure dendrimer on copper foam (Cu n O/Au HD/CF) as dual functional catalytic nanozyme to achieve enzyme mimic cascade reactions for efficient colorimetric analysis. A highly porous CF skeleton–based CuO nanowire array (CuO NWA) with a large specific surface area supported an efficient load capacity to assemble sufficient Cu n O/Au HD by electrodeposition. The bimetallic Au-Cu nanozyme successfully achieved an oxidase-like and peroxidase-like cascade catalysis by a target-responsive sensing mechanism. Due to the confirmed catalytic performance of selectivity, anti-interference ability, and reproducibility, a Cu n O/Au HD/CF-based quantitative analytical method was developed for glucose detection with a wide linear range and considerable detection limit of 8.4 μM. The robust nonenzymatic catalytic strategy for colorimetric detection not only confirmed the dual functional catalytic activity of Cu n O/Au HD/CF, but also showed great potential for applications in clinical diagnostics and biochemical analysis. Graphical abstract
✓ 已验证
DOI
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2022
·Vol. 169
·期 3
·037529
·
IF 4.386
Bei-Bei Tao,Ning-Ning Wu,Hong-Ding Zhang,Hai-Bo Wang
It is of great importance to integrate two kinds of fluorescent probes in one system to construct ratiometric sensing platform. Inspired by the efficient overlapped spectrum of glutathione-stabilized copper nanoclusters (GSH-CuNCs) and 2, 3-diaminophenazine (DAP), a novel and label-free ratiometric fluorescent sensor has been developed for Cu2+ and kojic acid (KA) detection on the basis of in situ converting o-phenylenediamine (OPD) into DAP by the catalytic oxidation ability of Cu2+. The Cu2+ catalytically generated DAP was served as an energy acceptor to inhibit the fluorescence emission of GSH-CuNCs (energy donor). As a result, the sensitivity and accuracy of the strategy were greatly improved due to the dual-emission reverse change ratiometric profile. The sensing system showed high sensitivity toward Cu2+ in a range of 0.1–50 μM and with a limit of detection of 20 nM. Furthermore, based on the specific coordination interaction between Cu2+ and KA, the ratiometric sensor displayed the range of detection of KA from 0.2 μM to 300 μM with a limit of detection of 50 nM. Thus, the ratiometric method paved a new way for the effective quantification of Cu2+ and KA in real samples, which were closely concerned with human health.
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2021
·Vol. 50
·期 21
·7256-7264
·
IF 4.39
Lei Ye,Yeqing Zhang,Limin Wang,LinXiu Zhao,Yaqiong Gong
Due to the slow kinetics of oxygen evolution at the anode, the efficiency of electrocatalytic water decomposition is critically reduced, and its large-scale application is severely restricted. Therefore, it is urgent to develop electrocatalysts with excellent performance and stability to accelerate the oxygen evolution reaction (OER) reaction kinetics. Herein, a self-supporting binder-free electrocatalyst was successfully prepared using in situ grown Cu(OH)2 nanowires on CF as the carrier to grow ZIF-67 via a room temperature immersion method. The combination of Cu(OH)2 nanowires and the unique structure of ZIF-67 forms a three-dimensional nanostructured catalyst, in which the unique structure and the existence of synergy may contribute to a larger electrochemical active surface area, expose more electrochemically active sites, adjust the electronic structure, and accelerate the rate of electron transfer, thus greatly improving the electrocatalytic activity and durability for OER. The as-prepared Cu(OH)2@ZIF-67/CF exhibited excellent OER performance under alkaline conditions and required overpotentials of 205 mV and 276 mV to drive current densities of 10 mA cm−2 and 100 mA cm−2, respectively, with a small Tafel slope of 70.5 mV dec−1 for OER. The stability test of Cu(OH)2@ZIF-67/CF at the current density of 10 mA cm−2 displayed excellent stability for 22 h. This study provides a feasible strategy for the rapid preparation of low-cost and efficient electrocatalysts in alkaline media.
✓ 已验证
DOI
高影响因子
Arabian Journal of Chemistry
·
2022
·
IF 6.212
Run Yuan,Yihe Qin,Can He,Zichen Wang,Lu Bai,Hong Zhao,Zijian Jiang,Lingyao Meng,Xuwen He
It is important to develop a catalyst that has high catalytic activity and can improve the degradation efficiency of refractory organic pollutants in the catalytic ozonation process. In this study, Fe-Mn-Cu-Ce/Al 2 O 3 was synthesised via impregnation calcination for catalytic ozonation of bio-treated coking wastewater. The physical and chemical characteristics of the catalysts were analysed using X-ray diffraction (XRD), X-ray fluorescence spectrometry (XRF), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller nitrogen adsorption–desorption methods. The effects of catalyst dosage, pH, and reflux ratio on the degradation efficiency of wastewater were examined in laboratory-scale experiments. The chemical oxygen demand (COD) removal rate of bio-treated coking wastewater was estimated to be 52.76 % under optimal conditions. The experiments on the catalytic mechanism demonstrated that the surface hydroxyl formed by the Lewis acid sites on the surface of the catalyst can react with ozone as the active site forming the active oxygen (·OH, ·O 2 – , and 1 O 2 ), thereby efficiently degrading the organic pollutants in coking wastewater. Furthermore, a pilot-scale experiment on the catalytic ozonation of bio-treated coking wastewater was carried out using an Fe-Mn-Cu-Ce/Al 2 O 3 catalyst, while the effects of the initial pollutant concentration, ozone concentration, and gas flow on the COD removal rate were studied on a pilot scale. It was found that the COD removal rate of the wastewater was ∼ 60 % under optimal parameters. After the treatment, the wastewater steadily reached the coking wastewater discharge standard (COD < 80 mg/L), while the operating cost of catalytic ozonation reached ∼ 0.032$/m 3 , thereby paving the way toward economic engineering applications. The COD degradation kinetics in the bio-treated coking wastewater followed pseudo-second-order kinetics. Three-dimensional fluorescence and gas chromatography–mass spectrometry revealed that macromolecular organic pollutants in the bio-treated coking wastewater were greatly degraded. In summary, Fe-Mn-Cu-Ce/Al 2 O 3 exhibited good reusability, high catalytic activity, and low cost and has a wide application prospect in the treatment of coking wastewater.
✓ 已验证
DOI
高影响因子