Biology of Sex Differences
·
2020
·Vol. 11
·期 1
·1-13
·
IF 3.267
Zhang Wenxin,Wu Hui,Xu Qi,Chen Sheng,Sun Lihong,Jiao Cuicui,Wang Luyang,Fu Feng,Feng Ying,Qian Xiaowei,Chen Xinzhong
Estrogen plays substantial roles in pain modulation; however, studies concerning sex hormones and nociception often yield confusing results. The discrepancy could be a result of lack of consensus to regard estrogen as a variable when working with animal models; thus, the influence of hormones’ fluctuations on nociception has continually been neglected. In the present study, we designed a novel hormone substitution model to aid us to evaluate the effects of estrogen’s long-term alterations on ovariectomy (OVX)-induced mechanical hyperalgesia and the expression of estrogen receptors(ERs). OVX rats were implanted with slow-release estrogen pellets at differently arranged time points and doses, such that a gradual elevation or decrease of serum estrogen levels following a relatively stable period of estrogen replacement was achieved in rats. Our results demonstrated that gradual estrogen depletion rather than elevation following the stable period of estrogen substitution in OVX rats alleviated OVX-induced mechanical hyperalgesia in a dose-independent manner, and the opposite estrogen increase or decrease paradigms differently regulate the expression of spinal ERs. Specifically, in rats rendered to continuously increased serum estrogen, the early phase estrogen-induced anti-nociception effect in OVX rats was eliminated, which was accompanied by an over-activation of ERα and a strong depression of ERβ, while in the OVX rats subject to gradual decrease of estrogen replacement, both ERα and ERβ increased modestly compared with the OVX group. Thus, the present study demonstrated that estrogen increase or decrease modulate nociception differently through change of spinal ERs.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 31
·期 2
·1483-1490
·
IF 2.195
Zhang Nan,Li Jinfeng,Men Xiusen,Li Zhigang,Zhao Hongtao
A novel electromagnetic functionalized Ni@PPy composite was synthesized with a cleaning method. XRD and FTIR analyses showed that the Ni@PPy composite was successfully prepared. SEM, TEM, and HRTEM results proved that Ni nanoparticles, produced by the γ-irradiation-induced reduction method, were wrapped with polypyrrole (PPy) shell to form core–shell structure. There existed many Ni cores in a PPy shell, which could induce more interfacial and dipolar polarization than the structure with one core in a shell. With an increase in Ni content, the dielectric loss was obviously decreased and the magnetic loss had little change. Attenuation constant decreased gradually, which was influenced jointly by conductivity loss and dipolar and interfacial polarization loss. When nPy/nNi/nAPS was 1.75:1:1.75, the as-prepared Ni@PPy composite exhibited the highest microwave absorption (RL max of − 48 dB at 7 GHz and EAB of 3.8 GHz) owing to suitable impedance matching as well as attenuation ability. Therefore, such core–shell structured Ni@PPy composite would be a promising microwave absorber.
✓ 已验证
产品关联
DOI
高影响因子
Nano Research
·
2019
·Vol. 12
·期 11
·2881-2888
·
IF 8.515
Yang Shaohan,Li Shuna,Song Lianghao,Lv Yipin,Duan Zhongyao,Li Chunsheng,Praeg Raphael Francesco,Gao Daowei,Chen Guozhu
Structure-engineered platinum-based nanoframes (NFs) at the atomic level can effectively improve the catalytic performance for fuel cells and other heterogeneous catalytic fields. We report herein, a microwave-assisted wet-chemical method for the preparation of platinum-copper-cobalt NFs with tunable defect density and architecture, which exhibit enhanced activity and durability towards the electro-oxidation reactions of methanol (MOR) and formic acid (FAOR). By altering the reduction/capping agents and thus the nucleation/growth kinetics, trimetallic platinum-copper-cobalt hexapod NFs with different density high-index facets are achieved. Especially, the rough hexapod nanoframes (rh-NFs) exhibit excellent specific activities towards MOR and FAOR, 7.25 and 5.20 times higher than those of benchmark Pt/C, respectively, along with prolonged durability. The excellent activities of the rh-NFs are assigned to a synergistic effect, including high density of defects and high-index facets, suitable d-band center, and open-framework structure. This synergistic working mechanism opens up a new way for enhancing their electrocatalytic performances by increasing defect density and high-index facets in open-framework platinum-based NFs.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2019
·Vol. 26
·期 11
·1-10
·
IF 1.53
Zhao Tianhong,Zhang Yiwen,Peng Guofeng,Chen Yin
A branched hydrophobicity associated with polyacrylamide based on silica was synthesized successfully. The structure of the polymer was characterized by Fourier Transform Infrared Spectrometer (FT-IR), 1 H Nuclear Magnetic Resonance ( 1 H NMR) and Scanning Electron Microscopy (SEM). Several properties such as intrinsic viscosity, temperature resistance, salt tolerance, shear resistance and viscoelasticity of the polymer were evaluated. Experiment results had demonstrated that the introduction of vinyltriethoxysilane (VTS-SiO 2 ) and branching molecular structure could endow the polymer with excellent temperature tolerance capability, salt and shear resistant capability.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 30
·期 21
·19541-19551
·
IF 2.195
Xiang Di,Hou Ying,Zhu Jiaqi,Yang Ming
In this study, we report a facile cation-exchange method to synthesize three different metal@dual sulfide hybrid nanostructures with enhanced photocatalytic properties. Starting from clusters of Au@Ag 2 S with a poorly crystalline shell, excess amounts of Cd 2+ , Zn 2+ and Pb 2+ are used to promote the thermodynamically unfavored cation-exchange under elevated temperature. The change of shell compositions accompanies the disassembly of Au@Ag 2 S clusters into monodisperse ternary core–shell nanostructures with modulated optical properties. Interestingly, it is found that Au@Ag 2 S–CdS outperforms Au@Ag 2 S–ZnS and Au@Ag 2 S–PbS in the visible-light-driven photodegradation of methylene blue, which can be largely attributed to the improved shell crystallinity, enhanced visible light absorption and appropriate band alignment for charge transfer.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2020
·Vol. 22
·期 1
·1-12
·
IF 2.132
Hou Junjie,Zhou Xuemei,Yang Zhi,Nie Huagui
Oxygen evolution reaction (OER) catalysts are of central importance for electrocatalytic water oxidation and fuel generation, while it is still an urgent requirement to design and develop efficient OER catalysts with rapid kinetics and low overpotentials. Herein, we report an electrochemical deposition method to fabricate carbon nanotubes/N-doped cuprous sulfide (CNTs/N-Cu 2 S) composites using thiourea and a CuSO 4 solution as the S and Cu sources, respectively. The advantages of this strategy include low cost, simple processing and the absence of templates or surfactants that can otherwise affect the electrochemical properties of the products. The N supplied by the thiourea can be used as a doping agent as a result of the in situ formation of small N-Cu 2 S particles, which can increase larger surface area and create more active sites to enhance OER catalytic activity, compared with that obtained with materials synthesized without adding the thiourea. The synergic interface of CNTs and N-Cu 2 S can improve conductivity and efficient chemical transfer in the composites electrodes by introducing CNTs. Under the optimal experimental conditions, the CNTs/N-Cu 2 S-5cyc composites present an excellent activity with the current density of 10 mA cm −2 at a low OER overpotential of 280 mV, the Tafel slope of 63 mV dec −1 and a strong electrochemical stability in 1.0 M KOH solution.
Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2020
·Vol. 187
·期 1
·1-9
·
IF 6.232
Duo Huixiao,Li Yijing,Liang Xiaojing,Wang Shuai,Wang Licheng,Guo Yong
Magnetic hierarchical nickel/nickel oxide/carbon nanorods (Ni/NiO@C) were prepared via the pyrolysis of a metal-organic framework containing nickel(II) nickel (Ni-MOF; Ni 3 (BTC) 2 ) under argon atmosphere. In this material, magnetic Ni/NiO@C nanoparticles are embedded in porous carbon nanorods, and the morphology is similar to that of the original Ni-MOF precursor. The synthesized nanorods were applied as magnetic sorbents in the solid-phase extraction of five benzoylurea insecticides (flufenoxuron, chlorbenzuron, teflubenzuron, diflubenzuron and triflumuron), and their performance was evaluated under optimized conditions. The results show that the material exhibits high extraction recoveries from spiked samples (82.9%–107.6%) and linear response in the range of 0.2–450 μg·L −1 . It is also characterized by relatively low limits of detection (50–100 ng·mL −1 ) at a signal-to-noise ratio of 3. The sorbent is chemically stable and can be repeatedly recycled, with little decline in extraction capacity after 20 cycles of reuse. The method was successfully applied to the quantification of benzoylureas in tea, wolfberry, millet, and oat samples, and it showed high extraction efficiency.
Schematic representation of the synthesis of magnetic hierarchical nickel/nickel oxide/carbon nanorods derived from Ni-MOF. The material is employed as a sorbent for the magnetic solid-phase extraction of benzoylurea insecticides.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Frontiers of Materials Science
·
2019
·Vol. 14
·期 1
·14-23
·
IF 1.701
Peng Mengke,Hu Fenyan,Du Minting,Mai Bingjie,Zheng Shurong,Liu Peng,Wang Changhao,Chen Yashao
Magnesium alloy (MgA) has been extensively used as orthopedic and cardiovascular scaffolds in virtue of its good biocompatibility, unique biodegradability and excellent mechanical properties. However, poor corrosion resistance and easy infection after implantation seriously limit the potential applications of MgA in the biomedical field. Herein, we fabricated bilayered nanoarrays of hydroxyapatite nanorods (HANRs) and ZnO nanorods (ZnONRs) onto the surface of MgA (MgA-MgO-HANRs-ZnONRs) via micro-arc oxidation (MAO) treatment, microwave-assisted hydrothermal and hydrothermal methods. The morphology and chemical composition of MgA-MgO-HANRs-ZnONRs was characterized by FE-SEM, XRD and EDS, indicating that HANRs-ZnONRs bilayered nanoarrays were fabricated on the surface of MgA-MgO. The surface of MgA-MgO-HANRs-ZnONRs exhibited excellent hydrophilicity as evidenced by the low water contact angle of 3°. Compared with the original MgA, the corrosion resistance of MgA-MgO-HANRs-ZnONRs was obviously improved with decreasing the corrosive current density ( i corr ) of 2 orders of magnitude. The MgA-MgO-HANRs-ZnONRs performed excellent antibacterial properties with the bactericidal rate of 96.5% against S. aureus and 94.3% against E. coli .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
·
2019
·Vol. 140
·期 4
·1759-1767
·
IF 2.471
Zhang Jiankan,Zhao Fengqi,Yang Yanjing,Yan Qilong,Zhang Ming,Ma Wenzhe
Fe 3 O 4 /reduced graphene oxide (Fe 3 O 4 /rGO) nanocomposite has been successfully fabricated using a modified interface solvothermal method and characterized by X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. In the preparation procedure, graphene oxide was reduced and ultrafine Fe 3 O 4 nanoparticles (NPs) were uniformly loaded on reduced graphene oxide (rGO) carrier. Scanning electron microscope, transmission electron microscope images and Brunauer–Emmett–Teller specific surface area revealed that the aggregation of Fe 3 O 4 NPs was greatly reduced by introducing rGO as a substrate. The average size of the Fe 3 O 4 NPs anchored on the graphene sheets was 100 nm, which is much smaller than 1-μm bare Fe 3 O 4 . The DSC results showed that Fe 3 O 4 /rGO nanocomposite reduces the first decomposition temperature of dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate (TKX-50) by 44.9 °C and decreases the apparent activation energy of TKX-50 by 26.2 kJ mol −1 , which exhibits higher catalytic performance than its individual components and their physical mixture (hybrid). Hence, Fe 3 O 4 /rGO nanocomposite can be a promising additive for insensitive solid propellants based on TKX-50.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2019
·Vol. 27
·期 1
·469-480
·
IF 3.917
Zhang Kangmin,Wang Miaomiao,Wu Mingyuan,Wu Qingyun,Liu Jiuyi,Yang Jianjun,Zhang Jianan
Abstract Effective separation of oil and water has always been a long-term challenge. Here we introduce a facile and fluorine-free method to fabricate superhydrophobic and superoleophilic filter paper without the decoration of solid particles for robust oil/water separation. After chemically bonding octadecanoyl and α-bromoisobutyryl groups on the surface of filter paper through simultaneous esterification with stearoyl chloride and α-bromoisobutyryl bromide (BiBB) to obtain C18-FP-g-Br, superhydrophobic poly(styrene-co-acrylonitrile) (SAN) grafted filter paper (C18-FP-g-SAN) was fabricated via surface-initiated atom transfer radical polymerization. The obtained C18-FP-g-SAN showed a water contact angle of 153° and achieved a separation efficiency exceeding 98.5% after ten different typical oil/water separation processes due to the synergistically combined contributions of bonded octadecanoyl chain and grafted SAN. C18-FP-g-SAN remained high separation efficiency after 10 cycles of use and treatment with strong acidic or basic solution. The excellent reusability and chemical stability of C18-FP-g-SAN promise its practical applications of continuous oil/water separation and oil spillage cleanup. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2019
·Vol. 10
·期 1
·1-10
·
IF 11.878
Yang Weifeng,Gong Wei,Hou Chengyi,Su Yun,Guo Yinben,Zhang Wei,Li Yaogang,Zhang Qinghong,Wang Hongzhi
Developing fabric-based electronics with good wearability is undoubtedly an urgent demand for wearable technologies. Although the state-of-the-art fabric-based wearable devices have shown unique advantages in the field of e-textiles, further efforts should be made before achieving “electronic clothing” due to the hard challenge of optimally unifying both promising electrical performance and comfortability in single device. Here, we report an all-fiber tribo-ferroelectric synergistic e-textile with outstanding thermal-moisture comfortability. Owing to a tribo-ferroelectric synergistic effect introduced by ferroelectric polymer nanofibers, the maximum peak power density of the e-textile reaches 5.2 W m −2 under low frequency motion, which is 7 times that of the state-of-the-art breathable triboelectric textiles. Electronic nanofiber materials form hierarchical networks in the e-textile hence lead to moisture wicking, which contributes to outstanding thermal-moisture comfortability of the e-textile. The all-fiber electronics is reliable in complicated real-life situation. Therefore, it is an idea prototypical example for electronic clothing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
IONICS
·
2019
·Vol. 26
·期 1
·127-139
·
IF 2.289
Zeng Tianbiao,Zhang Chuhong
The precursor synthesis of the LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) is usually operated in NaOH/NH 3 ·H 2 O aqueous system, and the pH value and the liquid feeding rate need strict control. Herein, a simple synthesis method was investigated without pH and liquid feeding rate control by using urea as the precipitation agent. The relationship of the metal ions’ concentration to the homogeneity of the precursor was studied in detail. To decrease the lattice disordering ratio and increase the reversible capacity of the NCA, polar CTAB molecules were added into the CO(NH 2 ) 2 /H 2 O system. The lattice disordering ratio of the NCA was decreased and the integral electrochemical performances were improved. The stable reversible capacity of the battery in 0.1, 0.5, 1, 2, 3, 4, and 6 C can reach to 188, 173, 167, 162, 152, 143, and 125 mAh g −1 . It is expected that the simple synthesize method may provide some inspiration to the NCA cathode research.
✓ 已验证
产品关联
DOI
高影响因子