INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2024
·
IF 3.8
Yishuang Wang,Baolong Qin,Mingqiang Chen,Defang Liang,Zhiheng Lu,Hairan Wang,Chang Li,Gang Yuan,Jun Wang,Liang Yuan
Direct catalytic oxidation (DCO) of coalbed methane to methanol has been considered as a significant technology for highly efficient and clean utilization of coal resources. Herein, the Cu-based spherical micromesoporous material (Cu/SMMM) was successfully prepared by using a sepiolite-derived silica source, and the DCO of methane to methanol was achieved under a low-temperature gas-phase system. Under the optimal reaction conditions, the Cu/SMMM accomplished the maximum methanol production of 69.3 μmol/gcat/h and methanol selectivity of 81.2% with full activation at 450 °C in air for 4 h, and the reaction was carried out at 320 °C for 1 h. Various characterizations demonstrated that the unique SMMM promoted the dispersion of copper oxides to form more active copper species and Lewis acidic sites (LAS). The variable-temperature FTIR, XAS, and NO-IR analyses identified that the highly dispersed dimeric copper species such as ([Cu2(μ-O)]2+ or [(Cu2O2)2+]) in Cu/SMMM was the major active species for DCO of methane into methanol. Additionally, combined with in situ FTIR analysis, the catalytic mechanism was revealed, in which the adsorbed methane species could be converted to CH3* species. Subsequently, CH3* species bound to oxygen of the dimeric copper species to form CH3O* species, which was then converted to methanol in the presence of water.
✓ 已验证
DOI
高影响因子
JOURNAL OF EXPERIMENTAL & CLINICAL CANCER RESEARCH
·
2025
·Vol. 44
·期 1
·1-25
·
IF 12.8
Wang Pengyu,Guo Weihua,Liu Shuyue,Li Shouyi,Li Jiaqi,Ding Bowen,Yin Fengyi,Yang Yang,Li Xingjiang,Cao Pei,Ma Chaozhe,Zhang Wanying,Song Yidan,Geng Yating,Liu Lantao,Hu Jing,Hao Jihui,Feng Yukuan
Background Copper accumulation triggers mitochondrial-driven cell death, known as cuproptosis, offering a promising mechanism for targeted cancer therapy. Recent studies have highlighted the critical role of intratumoral copper levels in regulating the expression of programmed cell death ligand-1 (PD-L1), suggesting that copper-induced cuproptosis not only enhances cancer cell death but may also amplify the effects of anti-PD-L1 antibodies (αPD-L1). However, in tumors where monotherapy with αPD-L1 shows limited efficacy, particularly in pancreatic ductal adenocarcinoma (PDAC), the role of copper-induced cuproptosis in enhancing αPD-L1 treatment efficacy and its underlying mechanisms remain unclear. Meanwhile, inadequate tumor drug accumulation and glycolysis significantly restrict the efficacy of cuproptosis. To address these challenges, we have synthesized a novel nanozyme, Pt@PCN-Cu, designed to stabilize intracellular copper accumulation and effectively induce cuproptosis. Additionally, we aim to determine whether this strong induction of cuproptosis can synergize with αPD-L1 to enhance cancer therapy, ultimately paving the way for novel strategies to improve PDAC treatment. Methods Pt@PCN-Cu was synthesized via a one-pot method, and its therapeutic potential was assessed in combination with αPD-L1 for the treatment of PDAC. Initially, the material’s properties were characterized, and its efficient cellular uptake was confirmed. Anti-tumor efficacy was evaluated by inducing cuproptosis in PDAC cell lines and xenograft models. RNA sequencing (RNA-seq) was utilized to identify key regulators involved in the modulation of PD-L1 expression by cuproptosis. Lastly, the therapeutic efficacy of Pt@PCN-Cu combined with αPD-L1 was evaluated in vivo, focusing on tumor growth inhibition and immune modulation within the tumor microenvironment (TME). Results Pt@PCN-Cu demonstrates excellent physicochemical properties and remarkable cascade catalytic activity, providing a solid foundation for further in vitro and in vivo studies. In vitro, Pt@PCN-Cu efficiently transports copper and induces cuproptosis primarily through mitochondrial dysfunction. Mechanistic studies show that Pt@PCN-Cu triggers the dissociation of hexokinase 2 (HK2) from mitochondria, leading to a reduction in HK2 activity. This decline in HK2 activity impairs glycolysis, a metabolic pathway essential for tumor energy metabolism, which in turn results in elevated PD-L1 levels. In vivo, Pt@PCN-Cu demonstrates excellent safety and accumulates at the tumor site in a subcutaneous PDAC mouse model, inducing cuproptosis. Moreover, the combination of Pt@PCN-Cu with αPD-L1 further enhanced its therapeutic efficacy and effectively reprogrammed the immunosuppressive TME. Conclusion This study presents strong evidence confirming the safety and therapeutic potential of Pt@PCN-Cu in PDAC treatment. Importantly, Pt@PCN-Cu not only induces cuproptosis but also significantly enhances antitumor efficacy in combination with αPD-L1 by regulating PD-L1 expression through HK2 modulation. These findings underscore a more effective and innovative approach for treating PDAC.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Cao Yang,Shanshan Shang,Yixuan Wang,Pei Wang,Lianpeng Sun,Xiao-yan Li
Single-atom catalysts (SACs) have garnered significant attention owing to their high reactivity; however, precise control of their electronic structure for Fenton-like process remains a challenge. In this study, we develop a novel technique for regulating the electronic environment of Cu-SACs to activate peroxymonosulfate (PMS) for highly effective degradation of emerging organic pollutants in water. By in-situ axial modification of Cu-SACs with Cu 2 O nanoclusters within a porphyrin metal–organic framework (Cu 2 O clu -Cu SA /PMOF), we finely tuned the electronic structure of Cu-SACs, leading to the selective generation of singlet oxygen ( 1 O 2 ) as the predominant reactive species in a nonradical Fenton-like process. The rate constant of the Cu 2 O clu -Cu SA /PMOF catalyst for PMS oxidation of sulfamethoxazole (SMX) surpassed that of Cu 2 O and Cu SA /PMOF by 12.9 and 3.7 times, respectively, outperforming most state-of-the-art heterogeneous catalysts for PMS activation. Density functional theory calculations elucidated that the modulation of electronic structure of the Cu sites in Cu 2 O clu -Cu SA /PMOF led to the preferred adsorption of PMS in the terminal-O mode and altered the electron transfer from PMS to the Cu sites for 1 O 2 generation through the self-reaction of SO 5 •− intermediates. This work presents a new material strategy by modulating the functionality of single-atoms via axial incorporation of nanoclusters in MOFs, realizing a highly efficient and selective Fenton-like oxidation process for sustainable water purification.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Bifang Zheng,Yi He,Shuangqin Tian,Shujie Wang,Lihong Tang
The combination of bamboo fiber (BF) with chitosan (CS) in aerogels to capture heavy metals from contaminated water has not yet been previously reported. In this study, we used a straightforward sol–gel followed by freeze-drying method to fabricate a biomass composite aerogel using waste BF and CS (BF/CSA). This material is low-cost, eco-friendly, and recyclable. In particular, the BF/CSA-2 exhibited excellent mechanical strength and strong acid resistance. It effectively adsorbed Cr(VI) at pH=2 and Cu(II) at pH=5, achieving removal efficiencies of 94% and 85%, respectively. The corresponding maximum adsorption capacities were 162.10 and 138.97 mg/g. BF/CSA-2 exhibited a high removal efficiency (>70 %) after five consecutive reuse cycles. The chemisorption mechanism was confirmed through adsorption isotherms and kinetic analysis. In addition, density functional theory (DFT) calculations revealed adsorption energies of −196.473 and −121.964 kcal/mol for Cr(VI) and Cu(II), respectively, on BF/CSA-2. Based on experimental characterization and theoretical calculations, the removal mechanism involves complexation, electrostatic attraction, and reduction. This study presents a promising advancement toward the development of scalable and sustainable biomass-based aerogels for water purification.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2025
·
IF 6.3
Aidi Xie,Jia Zhang,Chun Chen,Yunxia Zhang,Haimin Zhang,Huijun Zhao,Guozhong Wang
Semi-hydrogenation of syngas-based dimethyl oxalate (DMO) to valuable methyl glycolate (MG) intermediate has attracted considerable attention recently, while the yield of MG remains a challenge due to thermodynamically favorable continuous hydrogenation of DMO to ethylene glycol (EG). Silver catalysts were reported to be effective but suffered from low stability. Herein, we precisely designed an amino-functionalized mesoporous silica (NH 2 -MS) nanospheres-encapsulated Cu-Ag bimetallic catalyst (CuAg@NH 2 -MS) by a hybrid strategy of EDTA-modification and vacuum-impregnation. The designed bimetallic catalyst exhibited the best compromise between conversion and selectivity with a high MG yield of ∼96.3%, outperforming the unmodified CuAg@MS and mono-metallic Cu@NH 2 -MS and Ag@NH 2 -MS catalysts. Transmission electron microscope analysis revealed that amino-functionalization can effectively disperse and stabilize Cu-Ag nanoparticles. Hydrogen temperature-programmed reduction and X-ray photoelectron spectroscopy confirmed enhanced electron transfer between Cu and Ag species, as well as between Cu-Ag nanoparticles and the NH 2 -MS support. The highly dispersed active metals and enhanced electron interaction ultimately enabled a high MG yield by breaking the trade-off between DMO hydrogenation activity and MG selectivity. This robust catalyst also exhibited remarkable stability in continuous operation for 300 h in a fixed bed reactor. This work will facilitate precise construction of stable metal nano-catalysts for efficient catalytic selective hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 41
·20110-20120
·
IF 9.931
Jianhong Ma,Jinming Luo,Yutang Liu,Yuanfeng Wei,Tao Cai,Xingwen Yu,Hui Liu,Chengbin Liu,John C. Crittenden
A systematic study of the interaction between adsorbents and potentially toxic metal ions in multicomponent systems is of great significance due to the coexistence of multiple potentially toxic metal ions in the real water environment. In this study, a new humic substance-based double network hydrogel (PAA/HS gel) was produced by a radical polymerization method and applied to Pb(II), Cu(II) and Cd(II) removal in both individual and multicomponent systems under various conditions. The macroporous network structure (aperture ≈ 10 μm) and high water permeability of the PAA/HS gel could fully facilitate the active site exposure and increase the potentially toxic metal ion diffusion rate. The PAA/HS gel exhibited high theoretical adsorption capacities of 360.50, 151.00 and 412.76 mg g−1 for Pb(II), Cu(II) and Cd(II) in individual systems. Noticeably, both interference and promotion of adsorption behaviors were identified in multicomponent systems. In binary systems, the adsorption capacity and rate were decreased for Pb(II) and Cu(II), while increased for Cd(II). In ternary systems, the adsorption capacity and rate for Pb(II), Cu(II) and Cd(II) were decreased. The adsorption isotherms and kinetics were well fitted by Langmuir–Freundlich and Elovich models, respectively, indicating that the PAA/HS gel possessed a heterogeneous surface and various types of binding sites. The FTIR and XPS studies confirmed that both nitrogen- and oxygen-containing functional groups (i.e., amino, phenolic hydroxyl and carboxyl groups) were involved in the adsorption process, while the interactions between functional groups and Pb(II), Cu(II) and Cd(II) were different.
✓ 已验证
DOI
高影响因子
Polymers
·
2016
·Vol. 8
·期 4
·78
·
IF 2.944
Sheng Chen,Rui Ding,Xiuling Ma,Liqun Xue,Xiuzhu Lin,Xiaoping Fan,Zhimin Luo
In this article, reduced graphene oxide (RGO)/carboxymethyl chitosan (CMC) composites (RGO/CMC) were synthesized by a hydrothermal method throughin-situreduction and modification of graphene oxide (GO) in the presence of CMC. An electrochemical sensor for the determination of Cu(II) by differential pulse anodic stripping voltammetry (DPASV) was constructed by an electrode modified with RGO/CMC. The fabricated electrochemical sensor shows a linear range of 0.02–1.2 μmol·L−1, a detection limit of 3.25 nmol·L−1(S/N = 3) and a sensitivity of 130.75 μA·μmol·L−1·cm−2, indicating the sensor has an excellent detection performance for Cu(II).Keywords:graphene;carboxymethyl chitosan;sensor;differential pulse anodic stripping voltammetry;Cu(II)
✓ 已验证
DOI
PubMed
高影响因子
ELECTROANALYSIS
·
2021
·Vol. 33
·期 12
·2437-2444
·
IF 3.223
Pengcheng Ma,Xiaoyan Ma,Fang Chen
N-isopropylacrylamide was polymerized on the surface of copper-plated carbon paper electrode by a novel redox initiation system composed of persulfate and copper nanoparticles, and the PNIPAAm−Cu NPs@CP film electrode was obtained. Cyclic voltammetry (CV) results showed that the electrode exhibits a reversible temperature, pH and glucose switchable electrical signal response through the ferrocene carboxylic acid (Fc(COOH)). With this basis, a 4-current output logic gate system consisting of 3-response inputs of temperature, pH, and glucose was fabricated and a corresponding logic circuit for 3-input/4-output ports was established. This work might provide a new avenue for the development of multi-valued biologic systems.
✓ 已验证
DOI
高影响因子
Journal of the American Chemical Society
·
2017
·
IF 13.858
Senyun Ye,Haixia Rao,Ziran Zhao,Linjuan Zhang,Hongliang Bao,Weihai Sun,Yunlong Li,Feidan Gu,Jianqiang Wang,Zhiwei Liu,Zuqiang Bian,Chunhui Huang
It is extremely significant to study the trap state passivation and minimize the trap states of perovskite to achieve high-performance perovskite solar cells (PSCs). Here, we have first revealed and demonstrated that a novel p-type conductor Cu(thiourea)I [Cu(Tu)I] incorporated in perovskite layer can effectively passivate the trap states of perovskite via interacting with the under-coordinated metal cations and halide anions at the perovskite crystal surface. The trap state energy level of perovskite can be shallowed from 0.35–0.45 eV to 0.25–0.35 eV. In addition, the incorporated Cu(Tu)I can participate in constructing the p–i bulk heterojunctions with perovskite, leading to an increase of the depletion width from 126 to 265 nm, which is advantageous for accelerating hole transport and reducing charge carrier recombination. For these two synergistic effects, Cu(Tu)I can play a much better role than that of the traditional p-type conductor CuI, probably due to its identical valence band maximum with that of perovskite, which enables to not only lower the trap state energy level to a greater extent but also eliminate the potential wells for holes at the p–i heterojunctions. After optimization, a breakthrough efficiency of 19.9% has been obtained in the inverted PSCs with Cu(Tu)I as the trap state passivator of perovskite.
✓ 已验证
DOI
PubMed
高影响因子
TRANSACTIONS OF TIANJIN UNIVERSITY
·
2020
·Vol. 26
·期 6
·470-478
·
IF 0
Xu Rongjie,Xu Hua,Ning Shangbo,Zhang Qiqi,Yang Zhongshan,Ye Jinhua
Visible light photocatalytic CO 2 conversion is a promising solution to global warming and energy shortage. Herein, we build a well-designed bridge-like nanostructure, that is, the phosphonated Ru complex (RuP) light absorber–TiO 2 bridge–Cu catalyst. In this nanostructure, brookite TiO 2 serving as a bridge is spatially connected to the RuP and Cu on each of its sides and could thus physically separate the photoexcited holes and electrons over the RuP and Cu, respectively. Given its effective charge separation, this RuP–TiO 2 –Cu assembly exhibits superior CO 2 photoreduction activity relative to RuP–SiO 2 –Cu under visible light irradiation ( λ > 420 nm). The catalytic activity is further optimized by adopting brookite TiO 2 with various electronic band structures. Results reveal the rapid movement of electrons from the RuP through the conduction band of TiO 2 and finally to the Cu surface. This property is crucial in CO 2 photoreduction activity.
✓ 已验证
DOI
SENSORS AND ACTUATORS B-CHEMICAL
·
2025
·
IF 7.7
Siyuan Wang,Shuda Liu,Shuyun Meng,Yuqing Li,Na Dong,Zuo Chen,Wenjia Li,Dong Liu,Tianyan You
Microcystin-LR (MC-LR), a toxic cyanotoxin, poses severe risks to environmental and human health with its efficient detection urgently required for water safety monitoring. Here, we reported a photoelectrochemical (PEC)-surface-enhanced Raman scattering (SERS) dual-mode aptasensor based on WS 2 /copper(II) meso-tetra(4-carboxyphenyl) porphyrin (WS₂/Cu-TCPP) MOFs Z-scheme heterojunction with a single laser source to produce photocurrent and SERS signals. To access interference between PEC and SERS signals, their correlation was systematically examined by applying a certain bias voltage. This bias voltage drives photogenerated electrons into external circuit, thereby enhancing carrier separation efficiency and suppressing the return of Raman photons to the ground state. In this way, a complementary “PEC-enhancement/SERS-attenuation” signal pattern can be achieved to allow better reliability for biosensing. The presence of ascorbic acid (AA) replicated an identical response to confirm competitive coupling between PEC and SERS derived from WS₂/Cu-TCPP heterojunction. Based on this signal transduction mechanism and localized generated AA by magnetic separation, a dual-mode aptasensor was developed for MC-LR detection with superior sensitivity and interference resistance. It allowed a linear range of 0.01–50 ng mL −1 and a detection limit of 0.14 pg mL −1 for MC-LR as well as high selectivity and stability for real water samples analysis. This work should offer an efficient paradigm for precise analysis of hazardous pollutants in complex matrices.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2025
·
IF 3.9
Du Haoming,Wu Shenghao,Zhao Yuxuan
In this study, a series of non-equimolar ratio high-entropy rock-salt-type oxides (Mg, Co, Ni, Cu, Zn)O were prepared a high-temperature solid-phase method with tailored cation ratios, and their physical phase compositions and electrochemical properties were investigated. The result shows that (Mg, Co, Ni, Cu, Zn)O with varying elemental ratios form single-phase rock-salt structures when they are sintered at 1100°C under non-equimolar conditions. These oxides display a uniformly elemental distribution and irregular spherical particle morphology. With the increase in Ni or Co content, the electrochemical performance is significantly improved. Compared to the other six high-entropy oxides, (Mg0.1625, Co0.1625, Ni0.35, Cu0.1625, Zn0.1625)O powders have demonstrated excellent energy storage properties and rate capability, achieving a specific capacitance of 384.3 F/g at 1 A/g and a coulombic efficiency of 88.9%. These results demonstrate that non-equimolar (Mg, Co, Ni, Cu, Zn)O high-entropy rock-salt-type oxides have promising potential as advanced electrode materials. Graphical
✓ 已验证
产品关联
DOI
高影响因子