BIOTECHNOLOGY LETTERS
·
2018
·Vol. 40
·期 7
·1049-1055
·
IF 1.846
Zhao Weirui,Ding Huanru,Hu Sheng,Huang Jun,Lv Changjiang,Mei Jiaqi,Jin Zhihua,Yao Shanjing,Mei Lehe
Objective To develop a new and efficient biocatalytic synthesis method of imidazole-4-acetic acid (IAA) from l -histidine ( l -His). Results l -His was converted to imidazole-4-pyruvic acid (IPA) by an Escherichia coli whole-cell biocatalyst expressing membrane-bound l -amino acid deaminase (m l -AAD) from Proteus vulgaris firstly. The obtained IPA was subsequently decarboxylated to IAA under the action of H 2 O 2 . Under optimum conditions, 34.97 mM IAA can be produced from 50 mM l -His, with a yield of 69.9%. Conclusions Compared to the traditional chemical synthesis, this biocatalytic method for IAA production is not only environmentally friendly, but also more cost effective, thus being promising for industrial IAA production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2018
·Vol. 29
·期 14
·12161-12168
·
IF 2.324
Xie Fan,Qin Panliang,Zhuo Longhai,Lu Zhaoqing,Wang Yafang
The synthesis of ZnO nanowires (NWs) on aramid fiber (AF) surface via a facile in situ hydrothermal method was studied and the as-obtained AFs@ZnO NWs acting as the thermal conductive fiber fillers in the fabrication of aramid paper-based materials by wet-forming process were also investigated. SEM showed a dense and uniform ZnO NWs layer with vertical alignment was well established on surface of AFs. EDS and XRD characterization further confirmed the formation of ZnO NWs on AFs surface. Compared with the pristine paper, the composite paper exhibited better thermal conductivity increased by 129% from 0.0867 to 0.1985 W/m K and kept good insulating properties inherent to aramid paper. The excellent thermal conductivity of aramid paper was mainly attributed to the effective heat conduction networks formed by the AFs@ZnO NWs within the aramid paper. This study proposed an innovative way to fabricate fibrous thermally conductive filler, which effectively improved the dispersion, retention of fillers and interfacial bonding between fillers and fibers.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE
·
2018
·Vol. 55
·期 8
·3056-3064
·
IF 1.797
Xu Wei,Jin Weiping,Wang Yuan,Li Juan,Huang Kunling,Shah Bakht Ramin,Li Bin
In this work the influences of κ -carrageenan (CRG), konjac glucomannan (KGM) and inulin on lysozyme (Ly)’s structure, activity, and their complex phase behavior were investigated through spectroscopy and activity measurement in heated and unheated conditions. It was found that the impact on the structure and activity of Ly was determined by the interactions with polysaccharides. After heat treatment, KGM and CRG improved the stability of complex systems. However, inulin did not have significant impact. Heating process promoted to change the structure of Ly, and the intervention retard following the sequence of CRG > KGM > inulin. The worthwhile work indicated protein’s structure and activity could be regulated by the interaction with polysaccharide, which might provide theoretical basis for food preservation and processing in different temperature treatments. Besides, the bidirectional effects of polysaccharide on protein would be beneficial to rational selection of functional properties of polysaccharide/protein systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Bioresources and Bioprocessing
·
2018
·Vol. 5
·期 1
·1-11
·
IF 0
Liu Xin,Wang Weiwei,Hu Haiyang,Lu Xinyu,Zhang Lige,Xu Ping,Tang Hongzhi
Background Benzofuran and its derivatives contain central pharmacophores and are important structures in medicinal chemistry. Chemical synthesis of benzofuran rings often requires expensive catalysts and stringent operational conditions. Biosynthesis is recognized as a promising way to save energy and produce valuable compounds. Dioxin biodegradation pathways can form several benzofuran derivatives, and these pathways may be a better choice for further synthesis of important biological compounds. 2-Hydroxy-4-(3′-oxo-3′ H -benzofuran-2′-yliden)but-2-enoic acid (HOBB), a benzofuran derivative, can be biosynthesized from dibenzofuran (DBF) through co-metabolic degradation in a lateral dioxygenation pathway. Results Efficient biosynthesis of HOBB was observed using whole cells of Pseudomonas putida strain B6-2. After cultivation in LB medium containing biphenyl, the cells were suspended to an OD 600 of 5 to conduct biosynthesis in the presence of 0.5-mM DBF at pH 7 for 8 h. The bacterial cells were used twice to degrade approximately 0.70-mM DBF, and in batch process, accumulated about 0.29-mM HOBB. HOBB could be easily purified from the reaction with ethyl acetate using the neutral-acid extraction method, and 13.58 ± 0.31 mg of HOBB was obtained from 22.49 ± 0.74-mg DBF with an overall production yield of 60.4% (w/w). The product HOBB, which is a yellow powder, could be detected and identified by LC–MS, GC–MS, and NMR. Conclusions In this study, a new biological route was developed to produce HOBB from DBF using whole cells of P. putida B6-2 (DSM 28064). The biosynthesis of HOBB may contribute to studies of the DBF lateral pathway and provide a new green route for synthesizing benzofuran derivatives with pharmacological activities.
✓ 已验证
产品关联
DOI
CATALYSIS LETTERS
·
2018
·Vol. 148
·期 7
·1990-2000
·
IF 2.911
Zhang Kai,Zhang Yunhai,Zhang WanJu
Abstract A kind of 2D/2D heterojunction photocatalysts was constructed by a facile in situ hydrothermal method that a tetragonal CuInS 2 nanosheets was horizontal loaded in ultrathin hexagonal SnS 2 nanosheets. Contrasted to pure CuInS 2 and SnS 2 nanosheets, the CuInS 2 /SnS 2 nano-heterojunctions revealed a noteworthy improvement photocatalytic activity under visible light irradiation for the degradation of organic dyes, which should be attributed to the narrowest band gap and the efficient charge separation and transfer improving the contact region in heterojunction interface. Especially, with 0.5 wt% addition of CuInS 2 , the heterojunction nanosheets shows a supreme visible-light photocatalytic activity and a superb degradation efficiency which reached 99% in 60 min with the solution of methyl orange. Moreover, CuInS 2 /SnS 2 nano-heterojunctions deliver excellent reusability in five degradation–regeneration cycles. The results indicated that CuInS 2 /SnS 2 has a promising prospect in organic pollutant treatment due to high efficiency and excellent stability. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
Journal of Bionic Engineering
·
2018
·Vol. 15
·期 3
·461-470
·
IF 2.325
Xiong Xiong,Liu Yumei,Shi Feng,Zhang Guowei,Weng Jie,Qu Shuxin
The aim of this study is to investigate the effect of the contents of modified 3, 4-dihydroxyphenyl-L-alanine (DOPA), named as dopamine methacrylamide (DMA), on the adhesion of mussel-inspired adhesives in air and water. A series of adhesives, p(DMA-co-MEA), were synthesized by copolymerized DMA and methoxy ethylacrylate (MEA) with the content of DMA from 2 mol.% to 10 mol.%. Results of 1 H NMR show that the contents of DMA in all adhesives are near to the theory ratios of DMA in the staring reagents. Adhesives with more than 5 mol.% of DMA appear adhesion, while adhesives with 2 mol. % and 3 mol. % of DMA show almost no adhesion in air and water. Adhesive with 7 mol.% of DMA has the highest molecular weight and adhesion either in air or in water in all adhesives. Adhesion of adhesive is synergistically influenced by the content of DMA, molecular weight and elastic modulus of adhesive. It is because that higher content of DMA would provide more DOPA, which leads to the coordination bond between DOPA and metal ions. It is feasible to develop the mussel-inspired adhesive through incorporating DMA into polymers, which will have potential application in the clinic.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2018
·Vol. 29
·期 14
·11878-11885
·
IF 2.324
Ding Shoujun,Zhang Haotian,Liu Wenpeng,Sun Dunlu,Zhang Qingli
LnNbO 4 (Ln = Y, Gd and Lu) is a type of material that can be used as both outstanding self-activated phosphor and laser host has generated significant interests. However, their electronic structures and optical properties still require elucidation. To solve this intriguing problem, firstly, YNbO 4 and LuNbO 4 polycrystalline with monoclinic crystal structure were prepared by traditional high-temperature solid-state reaction method and their structure and luminescent properties were characterized in experiment. Additionally, their CIE chromaticity coordinate were presented to illustrate the luminescent color and the chromaticity coordinates for YNbO 4 and LuNbO 4 are x = 0.1581, y = 0.0725 and x = 0.1581, y = 0.0753, respectively. Secondly, systematic theoretical calculations based on density functional theory method were carried out on them and their band structures, density of states as well as optical properties were obtained in theoretical. The calculated band gap for YNbO 4 and LuNbO 4 are 4.101 and 4.214 eV, respectively. Lastly, a comparison between the experimental and calculated band gap and refractive index was conducted. The good coincident between them indicating the calculated results are reliable. Therefore, all of the obtained results could provide an essential understanding of LnNbO 4 materials.
✓ 已验证
产品关联
DOI
高影响因子
IRANIAN POLYMER JOURNAL
·
2018
·Vol. 27
·期 6
·405-411
·
IF 1.278
Zhang Haibo,Yang Yanping,Shen Minggui,Shang Shibin,Song Jie,Jiang Jianxin,Song Zhanqian
A full bio-based cured resin was synthesized by copolymerization of acrylated-epoxidized soybean oil (AESO) and 2-acrylamidoethyl dehydroabietic acid (DHA-HEMAA). The rigid rosin-based monomer 2-acrylamidoethyl dehydroabietic acid was first prepared from dehydroabietic acid and N -hydroxyethylacrylamide, which was characterized by nuclear magnetic resonance and Fourier transform infrared (FTIR) spectrometry techniques. The cured resin was then synthesized and characterized by FTIR spectroscopy, differential scanning calorimetry, dynamic thermomechanical analysis, and thermogravimetric analysis, as well as using a Kruss tensiometer and a universal testing machine. The results indicated that the resin cured with rosin-based monomer exhibited excellent thermomechanical properties. The crosslink density and thermal stability of cured samples containing DHA-HEMAA at molar ratio between 10 and 30% were higher than those of AESO/DHA-HEMAA0 sample. With increasing DHA-HEMAA content, the glass transition temperature ( T g ), elongation-at-break, and tensile strength of samples increased, in the stated order, from 16 to 38 °C, from 24 to 45.8%, and from 1.7 to 6.5 MPa. Due to DHA-HEMAA with a hydrophenanthrene structure, the θ values increased with the increase of DHA-HEMAA molar ratios. The full bio-based rosin thermosetting resins may have great potentials in practical application fields, such as coating, adhesive, and packaging materials.
✓ 已验证
产品关联
DOI
高影响因子
Plasmonics
·
2018
·Vol. 14
·期 1
·187-195
·
IF 2.366
Zhang Pengfei,Liu Le,He Yonghong,Chen Xiaoxia,Ma Kaijie,Wei Dong
We describe an Au-MgF 2 -Au trilayered waveguide-coupled surface plasmon resonance (WCSPR) sensor in this article. The characteristics of this sensing structure are compared with those of the conventional single-layered gold surface plasmon resonance (SPR) sensor theoretically and experimentally. The experiment results show that WCSPR can provide not only seven times smaller refractive index resolution in the bulk sensing application but also more accurate measurement results for the biomolecular interaction analysis than the conventional single-layered gold SPR. What’s more, this high-resolution sensor is easy to build and not sensitive to film thickness variations. The Au-MgF 2 -Au trilayered WCSPR may provide a simple and convenient chip-based strategy for performance enhancement of SPR sensors without varying the hardware and software of measurement instruments.
✓ 已验证
产品关联
DOI
高影响因子
FIBERS AND POLYMERS
·
2018
·Vol. 19
·期 5
·1004-1013
·
IF 1.353
Xu Qingbo,Ke Xiating,Ge Naiqin,Shen Liwen,Zhang Yanyan,Fu Feiya,Liu Xiangdong
When copper nanoparticles (Cu NPs) were applied as an antimicrobial agent to finish cotton fabrics, there are two issues should be solved: the oxidization and the weak adsorbability onto cotton fiber surface. In the present work, we developed a new method that can achieve both immobilization and protection of the Cu NPs at the same time. As an effective binder, thioglycolic acid (TGA) was covalently linked to cotton fiber surface via an esterification with the hydroxyl groups of cellulose, then Cu NPs were introduced on the fabric surface in the presence of a protective reagent, citric acid. Due to the doubled stabilization acts of TGA and citric acid, the Cu NPs immobilized on the fabric surface showed an excellent antibacterial effect and outstanding laundering durability. Even after 50 consecutive laundering tests, the modified cotton fabrics still showed satisfactory antibacterial ability against both S. aureus and E. coli , which the bacterial reduction rates are all higher than 96 %. It is believed that this methodology has potential applications in a wide variety of textile productions such as sportswear, socks, and medical textiles.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2018
·Vol. 20
·期 11
·1-10
·
IF 2.127
Wei Qiuxi,Wu Kangbing,Wang Zhengguo,Ye Xiaoxue,Li Chunya,Wang Yanying,Gan Tian
1-Vinyl-3-butyl-imidazolium hexafluorophosphate (VBimPF 6 ) was used as a functional monomer to fabricate an imprinted film onto a glassy carbon electrode modified with gold nanoparticle under the conditions applying 4,4′-dibromobiphenyl (DiBB) as a template, ethylene glycol dimethacrylate (EGDMA) as a cross-linker, and ammonium persulfate and N,N,N′,N′ -tetramethylethylenediamine as initiators at room temperature. After the fabrication process, the embedded DiBB template was removed to obtain a new electrochemical sensor with high specific recognition sites toward DiBB. The morphology of the electrode surface was characterized with scanning electron microscope and atomic force microscope. Electrochemical impedance spectroscopy was used to test the sensing performances of this newly developed electrode. The imprinted film exhibited high selectivity and sensitivity in the determination of DiBB. Under optimized conditions, the charge transfer resistance attributed to the interaction of DiBB with the electrode was found linearly related to the logarithm of DiBB concentration in the range from 0.005 to 10.0 μM. The estimated detection limit is 0.001 μM (S/ N = 3). Therefore, this electrode shows great application potential for the determination of trace DiBB contents in soil samples.
4,4′-Dibromobiphenyl imprinted polymerized ionic liquid integrated with gold nanoparticle-modified glassy carbon electrode was fabricated. Electrochemical impedance response was used for sensing performance investigation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2018
·Vol. 30
·期 1
·302-307
·
IF 2.324
Xing C. F.,Liu Q. Q.,Wu H. T.
The Li 2 (Mg 0.9 A 0.1 ) 4 TiO 7 (A = Co 2+ , Ni 2+ , Mg 2+ , Zn 2+ , Ca 2+ ) ceramics were prepared by the conventional solid-state reaction method. A series of Li 2 (Mg 0.9 A 0.1 ) 4 TiO 7 ceramics were investigated in regard to the sintering temperatures, crystal structures and dielectric properties. The Li 2 (Mg 0.9 A 0.1 ) 4 TiO 7 ceramic exhibited a single phase of Li 2 Mg 4 TiO 7 , and the Rietveld refinement was used to analyze the crystal structure. The Li 2 (Mg 0.9 Ca 0.1 ) 4 TiO 7 ceramics could be sintered below 1350 °C with high densities, high dielectric constants and near zero τ f values. The maximum Q · f value of Li 2 (Mg 0.9 Zn 0.1 ) 4 TiO 7 was higher than that of Li 2 (Mg 0.9 A 0.1 ) 4 TiO 7 (A = Co 2+ , Ni 2+ , Mg 2+ , Ca 2+ ). The optimum microwave dielectric properties of ε r = 14.77, a high Q · f value of 162,200 GHz and τ f = − 4.30 ppm/°C were achieved in Li 2 (Mg 0.9 Zn 0.1 ) 4 TiO 7 ceramic sintered at 1500 °C. In addition, Li 2 (Mg 0.9 Ca 0.1 ) 4 TiO 7 ceramic sintered at 1300 °C exhibited the suitable dielectric properties with a high ε r value of 15.79, Q · f = 100,300 GHz and a near zero τ f value of − 1.43 ppm/°C.
✓ 已验证
产品关联
DOI
高影响因子