AICHE JOURNAL
·
2025
·
IF 4
Qi Liu,Yihan Yin,Tong Luo,Min Xiao,Hongxia Gao,Wilfred Olson,Zhiwu Liang
Amine blend is a viable method to formulate superior absorbents for CO 2 capture from flue gas. However, the understanding of the degradation of blended amines, especially the interaction effect on the degradation pathway is limited, which restricts the solvent development. In this work, the oxidative degradation of 1-amino-2-propanol (1AP) and its blends with various tertiary amines is studied by analyzing amine loss, alkalinity loss, viscosity change, NH 3 emission, and heat-stable salt generation. Experimental results show that both triethanolamine and N -methyldiethanolamine have an excellent inhibition effect on 1AP oxidative degradation, reducing 1AP loss from 47.0% to 6.5% and 8.5%, respectively. The reaction pathways for the oxidative degradation of single and blended 1AP solutions are proposed and evaluated by density functional theory calculations. Computational results show that the reactions between 1AP peroxide radicals and peroxide radicals of tertiary amines reduce 1AP loss, which agrees with experimental results.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED SYNTHESIS & CATALYSIS
·
2025
·
IF 4
Haonan Li,Weimin Ma,Pei Kang,Yingxuan Li
The rational design of efficient thermal-photo CO 2 reduction catalysts necessitates synergistic integration of structural modulation and reactant activation strategies. Herein, a Mg-doped Bi nanosphere catalyst is reported, engineered for efficient CO 2 reduction under H 2 O-H 2 co-feeding conditions. Mg doping not only optimizes the nanostructure by reducing the particle size but also modifies the surface charge distribution and enhances water adsorption, thereby promoting CO 2 activation and catalytic performance. Crucially, under H 2 O H 2 co-feeding, H 2 O interacts with Bi to generate hydroxylated Bi OH sites that promote CO 2 chemisorption, while H 2 supplies hydrogen species (*H) for CO 2 reduction. In situ diffuse reflectance infrared Fourier transform spectroscopy reveals a cooperative mechanism: CO 2 adsorbs on Bi OH to form *CO 3 2− intermediates, which undergo sequential reduction facilitated by H 2 activation. This synergy achieves a CO production rate of 55.32 μmol·g −1 ·h −1 under 420 nm illumination with 100% selectivity, which is 2.4 times higher than that under a pure H 2 atmosphere. The work highlights the critical role of dopant-driven active site engineering and reactant synergies (H 2 O H 2 ) in CO 2 valorization, providing a scalable strategy for catalytic performance enhancement.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·Vol. 13
·期 6
·120398
·
IF 7.2
Rui Li,Yangyang Lei,Meilin Yin,Lipeng Wang,Shaokun Tang
Combining ionic liquids (ILs) with metal–organic frameworks (MOFs) functionalizes the MOF pores and provides numerous active sites including Lewis acidic sites and hydrogen bond donors in the resulting heterogeneous composites, making them promising materials for CO 2 capture and conversion. Despite this potential, the prevalent microporosity in most MOFs severely restricts mass transfer. To address this limitation, it is essential to introduce hierarchical porosity into MOFs since it can enhance CO 2 capture and conversion by facilitating mass transfer and molecular diffusion. In this work, a hierarchical porous gel of UiO-66-NH 2 (denoted as HP-UiO-66-NH 2 ) was prepared through a simple sol-gel process, exhibiting micropores within the particles, mesopores between the particles, as well as multiple catalytic sites. Subsequently, poly(ionic liquid)s (PILs) were introduced into the porous framework to successfully construct PILs-MOFs gel materials (HP-MOF@PILs). A comprehensive evaluation was conducted on the synthesized materials regarding their ability to adsorb CO 2 , their catalytic performance in CO 2 cycloaddition with epichlorohydrin, and their recyclability. Benefiting from the synergistic advantages of its hierarchically porous structure and the strong CO 2 and epoxide activation ability of nucleophilic Br ions in PILs, HP-MOF@PIL-2 demonstrated exceptional catalytic performance and achieved high efficiency for the cycloaddition of CO 2 with epichlorohydrin under mild conditions (80 °C, 0.1 MPa, 24 h) without requiring co-catalysts or solvents, showcasing its role as a potential and eco-friendly catalyst in CO 2 conversion processes.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Yuewen Chen,Tao Zheng,Hai Liu,Weidong Xie,Jiali Huang,Yimin Wang,Xiya Zhang,Zhen Yuan,Zhile Xiong
The electrocatalytic reduction of CO 2 to CO represents an important approach for carbon resource utilization. However, most existing catalysts still suffer from low activity and poor selectivity. In this work, a novel “domain-confined interface” synergistic catalytic system was constructed by integrating ionic liquid [BMIM][BF 4 ] with zeolitic imidazolate framework-8 (ZIF-8) to enhance the CO 2 reduction reaction (CO 2 RR) performance. The high specific surface area and microporous structure of ZIF-8 provide an ideal platform for CO 2 adsorption and activation, while [BMIM][BF 4 ] improves the local microenvironment of the catalytic interface, thereby boosting the catalytic activity. Experimental results indicate that the incorporation of the ionic liquid significantly enhances the CO 2 RR performance of ZIF-8 at low potentials. The Faradaic efficiency for CO (FE CO ) increases from 38.98 % to 75.25 % at −0.8 V versus the reversible hydrogen electrode (RHE). Moreover, at the optimal potential of −1.2 V (vs. RHE), FE CO reaches 96 % and remains stable during an 8-hour durability test, outperforming most reported ZIF-8-based catalysts. This work may provide useful insights for the design of efficient CO 2 RR electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Yingkun Zhu,Jianjun Wu,Yixin Zhang,Zekai Miao,Fanhui Guo,Yanjie Niu
The development of high-performance CO 2 adsorption materials for industrial applications is currently a focal point of research. Leveraging the loose and porous characteristics of coal gasification fine slag (CGFS), an increasing number of scholars are synthesizing porous materials using CGFS as a precursor for CO 2 adsorption. Biomass combustion ash (BCA), rich in alkaline substances and metal elements, plays a significant role in promoting the formation of pore structures and surface modification of CGFS-based porous materials. Consequently, we propose the synergistic preparation of carbon-ash composite CO 2 adsorbent materials (CACs) from CGFS and BCA. The results demonstrate that the incorporation of BCA significantly enhances CGFS-based porous materials performance, primarily manifested by a more developed mesoporous and microporous structure, the formation of richer surface adsorption sites, and improved CO 2 adsorption performance, including higher adsorption capacity and stronger CO 2 binding affinity. The optimal dual solid waste-based carbon-ash porous material was achieved when the BCA content in the raw material reached 60% (by weight), with the highest specific surface area, maximum CO 2 adsorption capacity, and strongest adsorption binding force.
✓ 已验证
产品关联
DOI
高影响因子
Membranes
·
2025
·Vol. 15
·期 5
·128
·
IF 3.6
Yingxiu Wu,Haiyan Guo,Bingyu Zhao,Yuxiu Yu,Yaodong Liu,Shouchun Zhang
Carbon molecular sieve (CMS) membranes demonstrate considerable advantages and significant potential in the separation of CO2and CH4. Nevertheless, current research predominantly emphasizes the enhancement of CMS membranes through the incorporation of rigid structures and chain spatial stacking. The role of flexible structures in this context remains inadequately understood. To address this gap, we introduced long-chain polydimethylsiloxane (PDMS) and copolymerized it to synthesize polyimide that combines rigid and flexible frameworks. This approach enabled us to investigate the impact of flexible structures on the structure and properties of carbon membranes by varying the PDMS content. The findings indicated that flexible PDMS significantly influenced the thermal decomposition behavior of polyimide and facilitated in situ silicon doping within the carbon membranes, thereby modifying the pore characteristics of the carbon film. Specifically, with a 10% addition of PDMS, the CO2permeability of the CMS membrane reached 9556 Barrer, representing an enhancement of 103.9% and surpassing the 2019 upper bound for CO2/CH4separation. Furthermore, the effect of pyrolysis temperature was also examined. Ultimately, this study offers a novel perspective on regulating the structural and performance characteristics of carbon membranes through the integration of long-chain flexible structures.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Junhao Tang,Minqiang He,Biyang Zhang,Kang Zhong,Zhengrui Yang,Zhaolong Wang,Xingwang Zhu,Huaming Li,Jinman Yang,Hui Xu
The utilization of heterojunction photocatalysts in photocatalytic CO 2 conversion has attracted significant attention. Nevertheless, the interface structure between the two components in the heterojunction material essentially decides the carrier separation efficiency and the performance of photocatalytic CO 2 reduction. The development of semiconductor heterojunctions with suitable materials and intimate interfacial contact is paramount. In this study, SnIn 4 S 8 /Co 3 O 4 heterostructures have been successfully fabricated by a facile hydrothermal synthesis method. The experimental results demonstrated that the established internal electric field effectively suppressed the recombination of photogenerated carriers and accelerated charge transfer kinetics. Meanwhile, the increased specific surface area endows SnIn 4 S 8 /Co 3 O 4 heterostructures with an improved CO 2 adsorption ability, ultimately achieving a significant improvement in photocatalytic activity. The highest formation rate of CO and CH 4 reaches 38.20 and 3.60 μmol g −1 h −1 . The design strategy reveals the potential of establishing intimate interfacial contacts as an extremely efficient catalyst for photocatalytic CO 2 reduction, facilitating effective charge separation. This work provides distinctive thoughts for the development of advanced catalytic material design for CO 2 conversion and other photocatalytic applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Xiaoyan Zhang,Wenkang Ni,Peihang He,Zhijie Wang,Ke Wang,Zizhong Zhang,Wenxin Dai,Xianzhi Fu
Photocatalytic CO 2 reduction comprises two coupled half-reactions: CO 2 reduction and H 2 O oxidation. Efficient coupling of these reactions maximizes the utilization of photogenerated electrons and holes, enhancing CO 2 conversion and product selectivity. In this study, sulfur-deficient V S -Zn 3 In 2 S 6 (V S -ZIS) catalysts were synthesized via an ethylene glycol solvothermal method, followed by anchoring Fe single-atom sites (Fe/V S -ZIS) to facilitate CO 2 photoreduction using H 2 O as proton source. The 1 %Fe/V S -ZIS exhibited exceptional performance, with a CO production rate of 88.6 μmol·g −1 ·h −1 and 97 % selectivity. Experimental and DFT results revealed that V S functioned as reductive sites to strengthen CO 2 adsorption and activation, while Fe single atoms (SAs) served as oxidative sites to facilitate H 2 O dissociation for proton supply. Fe SAs also induced spin polarization to enhance IEF, thereby suppressing photogenerated charges recombination at redox sites. Meanwhile, Fe SAs reduced COOH* formation energy barrier and lowered CO desorption temperature, improving CO selectivity. The constructed dual active sites synergistically enhanced the overall photocatalytic CO 2 reduction performance. This work offers new technical pathways for designing redox dual-active sites to boost the overall photocatalytic CO 2 reduction efficiency.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2025
·
IF 9
Jiangnan Wang,Long Li,Jinli Zhang,Xueqin Li
The construction on the interconnected network can be considered as a potential strategy for boosting CO 2 transport in mixed matrix membranes (MMMs). In this study, poly (ionic liquids)/ZIF-8 (PIL/ZIF-8) was synthesized and incorporated into sulfonated poly (ether ether ketone) (SPEEK) matrix to fabricate MMMs for rapid CO 2 transport. Wherein, ZIF-8 with a highly porous framework within PIL/ZIF-8 can efficiently capture CO 2 and allow CO 2 simultaneously transport in multi routes, thus improving CO 2 separation performance of SPEEK/PIL/ZIF-8 MMMs. PIL in PIL/ZIF-8 can guide the rapid transport of CO 2 in an orderly manner with the help of the anion CO 2 carriers (Cl − ) on the PIL chains, accelerating CO 2 transport in the MMMs. And the interconnected network was constructed by incorporating PIL/ZIF-8 in MMMs, which was endowed with the excellent CO 2 separation performance. And the CO 2 permeability and CO 2 /CH 4 selectivity of SPEEK/PIL/ZIF-8-7 MMM were 1641 ± 41 Barrer and 32 ± 0.9, respectively, approaching the 2019 upper bound. It implied that the construction on the interconnected network in MMMs had great potential for rapid CO 2 transport.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Zhicheng Liu,Manli Wang,Ming Hou,Yun Zhao,Wenbin Yang,Yangkai Han,Zhigang Shao
In traditional CO 2 electrolysis systems, oxygen evolution reaction (OER) consumes 90 % of the electricity input, whereas the product of oxygen holds minimal value. Moreover, the use of different electrocatalysts for the anode and cathode remains a challenge due to high capital costs of the electrolysis system. Substituting the OER with thermodynamically advantageous value-added anodic reactions and developing bifunctional electrocatalysts are crucial for the advancement of CO 2 electrolysis. In this study, for the first time, we present an innovative CO 2 electrolysis system that integrates CO 2 electroreduction reaction (CO 2 RR) with SO 2 electrooxidation reaction (SO 2 OR) and employ Ni-N-C as the bifunctional electrocatalysts to produce CO and H 2 SO 4 simultaneously. Notably, the novel CO 2 electrolysis system can reduce the cell voltage by 1.05 V, resulting in nearly 50 % reduction in energy consumption. This is also the first attempt to use Ni-N-C to catalyze SO 2 OR, showing markedly superior performance compared to commercial 20 % Pt/C. In-situ ATR-SEIRAS and DFT calculations demonstrate that the NiN 4 sites in Ni-N-C catalysts augment the direct conversion of *SO 2 to *HSO 4 - , identified as the rate-determining step for the SO 2 OR. This work provides guidance for the design of novel CO 2 electrolysis systems, the construction of bifunctional electrocatalysts, as well as the mechanistic investigation of the SO 2 OR.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2025
·
IF 7.3
Xiaoman He,Zhangdi Peng,Peilin Shen,Chenjia Miao,Jiale Xie,Chen Deng,Panagiotis G. Kougias,Dekui Shen,Richen Lin
Conversion of CO2 and H2 into biomethane is a promising technology within the concept of power-to-X. However, the integration of high-value-added products can enhance the economic viability and diversify future biobased production chains. Herein, an integrated biosystem converting CO2/H2 into acetic acid, which is further converted to C4+ fatty acids, was demonstrated with the aim to assess the role of carbonaceous materials (model nanomaterial graphene and cost-effective biochar) and external electron donor (ethanol). With the supplementation of ethanol as the electron donor, carbonaceous materials significantly increased the production and selectivity of butyrate (C4) and caproate (C6) due to enhanced microbial growth and chain elongation efficiency. The highest concentration of butyrate (2512.35 ± 60.05 mg/L) was observed in the graphene-added group, while the highest concentration of caproate (396.74 ± 14.83 mg/L) was observed in the biochar group, suggesting different mechanisms induced by carbonaceous materials. Microbial community analysis revealed that carbonaceous materials primarily enriched members of the genus Clostridium_sensu_stricto_12, which are identified as typical carbon chain elongating microorganisms. Functional prediction revealed that carbonaceous materials increased the relative abundance of functional genes encoding crucial enzymes involved in both the Wood–Ljungdahl pathway and the fatty acid biosynthesis pathway. This study demonstrated an integrated approach for the efficient conversion of CO2 to value-added green chemicals.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Quanxiao Deng,Dezhong Song,Youzhen Liu,Ruizhi Yin,Chunyan Liu,Jia Huo
Carbon-based single-atom catalysts have demonstrated excellent performance in electrochemical CO 2 reduction reactions. However, the traditional planar, highly symmetric MN 4 structures seriously restrict their activities due to relatively weak interactions between the catalyst and CO 2 . In this work, we demonstrated a novel and controllable method for axial P coordination of single-atom Ni catalyst through low-temperature post-functionalization. This modification significantly regulates the spin state of the Ni sites, thereby increasing the interaction between CO 2 and the active sites. The axially P-coordinated single-atom Ni catalyst exhibits markedly improved performance for CO 2 conversion to CO, achieving a maximum CO Faradaic efficiency of ∼ 99 % at −0.98 V (vs. RHE) and a partial current density for CO of −45.1 mA cm −2 at −1.48 V (vs. RHE), which is 18.4 % higher than that of the pristine single-atom Ni catalyst. Density functional theory calculations indicate that axial P coordination modulates the magnetic moment of the Ni active center and the 3d orbital splitting energy levels, thereby promoting CO 2 adsorption and facilitating CO desorption by optimizing the binding energies of reaction intermediates. These findings are confirmed by experimental electron spin resonance measurements. This work provides a facile strategy for regulating the electronic structures of single-atom catalysts and highlights the potential for spin-state modulation to significantly enhance CO 2 electroreduction.
✓ 已验证
产品关联
DOI
高影响因子