COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
WeiChi Zhou,XueJiao Ding,WenFu Li,Liang Zhao,YinPeng Lu,MingHao Zhao,FuQiu Ma,ZhiDong Wen,HeXin Zhang,Jing Feng
As a green solution for environmental cleanup, the technology of photocatalysis still suffers from insufficient light absorption and rapid electron-hole recombination. In this study, the copper was deposited on MgO surface by a UV-assisted photodeposition method. It was found that the deposition of copper introduced oxygen vacancies, improved photogenerated charge carrier separation, and enhanced visible light absorption. These improvements were also attributed to the formation of a Schottky barrier and the localized surface plasmon resonance (LSPR) effect of copper species. The synergistic effects of multivalent copper species (Cu 0 , Cu + , Cu 2+ , and Cu 3+ ) and the oxygen vacancies introduced by the deposition of copper significantly promoted the generation of reactive oxygen species (·O 2 ⁻), thereby accelerating the degradation process and enhance the photocatalytic degradation activity toward Rhodamine B (RhB). The 3 %Cu-MgO exhibited the highest photocatalytic efficiency, degrading 92.8 % of RhB within 60 min. The corresponding pseudo-first-order reaction rate constant was 0.04359 min⁻ 1 , approximately twice that of pristine MgO. Notably, 3 %Cu-MgO demonstrated excellent photocatalytic performance over a broad pH range (3.6–10) and maintained good cyclic stability. The study clarifies the multifaceted function of valence-variable copper species in the photo-Fenton process and provides a meaningful reference for the design and exploration of other multivalent metal-based photo-Fenton catalysts in future studies.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Fanghai Liu,Hui Jiang,Zhanchuang Lu,Yanpeng Gao,Jiafa Li,Lin Zhou,Syed Aamir Hussain,Ping Chen,Xianghua Wang,Lei Chen
It is promising to develop next-generation indoor and outdoor flexible electroluminescent light sources, as thin as wallpaper, by converting electric energy into light directly based on semiconductor quantum dots (QDs). This work reports a sunlike full-spectrum electroluminescent white light-emitting diode (WLED) fabricated by spin-coating the mixture of yellow-green, red, and blue QDs at once, adopting the device structure of ITO/PEDOT:PSS/PVK(PTAA)/Mixed QDs/ZnO:Mg (AP-ZnO)/Al(Ag). The yellow-green and red QDs are prepared by coating three-layer ZnS shells on the CuInS2 cores, which are synthesized using sulfur powder and dodecanethiol (DDT) as sulfur source, respectively. The blue QDs are prepared by coating three-layer ZnS shells on ZnCuGaS2 cores. The photoluminescence quantum yield (PLQY) of the yellow-green, red, and blue QDs is 82%, 89%, and 83%, respectively. The WLED emits warm white light with a color temperature of 3000 K, chromaticity CIE (0.4228, 0.4287), and color rendering index (CRI) Ra 92.4. The electroluminescence spectrum of the device, whose similarity to the solar spectrum reaches 91.7% in the wavelength region of 450–700 nm, is rich in the red component and poor in the blue component, showing great potential for future healthy lighting applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Yu Ma,Haitao Zhang,Haizhou Zhang,Xinyuan Ren,Xiaochun Ma,Xiaoming Zhou,Yanlu Mu,Jiemei Yu,Taizhong Huang
Developing non-precious metal based catalysts is one of the most feasible ways to accelerate the application of hydrogen production technology by full water electrolysis with low-cost and high efficiency. In this work, hollow nanosphere structured Fe–Cu–Co trimetallic selenide based catalysts were successfully prepared by one-step hydrothermal method. The hollow nano-spherical shell structure was examined by using XRD, Raman, BET, SEM, TEM, XPS, etc. technologies. The catalytic performance for hydrogen evolution reaction (HER) of the catalysts was tested by LSV, Tafel, CV, EIS, i-t , etc . methods. The overpotential of FeCo 0.1 Cu 0.9 Se 2 catalyzed HER was only 191 (alkaline) and 112 mV (acidic) at 10 mA/cm 2 . The corresponding Tafel slope for HER is 180 mV/dec (alkaline) and 110 mV/dec (acidic), respectively. In addition, the FeCo 0.1 Cu 0.9 Se 2 also showed excellent long-time running stability. The current decay after continuous running 12 h in 0.5 M H 2 SO 4 and 0.1 M KOH electrolytes are 0.07 % and 0.271 %, respectively. FeCo 0.1 Cu 0.9 Se 2 catalyst with the hollow nanospherical structure exhibited excellent catalytic activity for HER. Density functional theory calculations show that the introduction of Co and Cu adjusted the electronic structure of FeCo 0.1 Cu 0.9 Se 2 and the special hollow nano-spherical structure provides enough active catalytic sites for HER. The nano-spherical structured multi-metal selenides show great potential to be high performance catalysts for HER in both alkaline and acidic electrolytes.
✓ 已验证
DOI
高影响因子
Arabian Journal of Chemistry
·
2022
·
IF 6.212
Run Yuan,Yihe Qin,Can He,Zichen Wang,Lu Bai,Hong Zhao,Zijian Jiang,Lingyao Meng,Xuwen He
It is important to develop a catalyst that has high catalytic activity and can improve the degradation efficiency of refractory organic pollutants in the catalytic ozonation process. In this study, Fe-Mn-Cu-Ce/Al 2 O 3 was synthesised via impregnation calcination for catalytic ozonation of bio-treated coking wastewater. The physical and chemical characteristics of the catalysts were analysed using X-ray diffraction (XRD), X-ray fluorescence spectrometry (XRF), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller nitrogen adsorption–desorption methods. The effects of catalyst dosage, pH, and reflux ratio on the degradation efficiency of wastewater were examined in laboratory-scale experiments. The chemical oxygen demand (COD) removal rate of bio-treated coking wastewater was estimated to be 52.76 % under optimal conditions. The experiments on the catalytic mechanism demonstrated that the surface hydroxyl formed by the Lewis acid sites on the surface of the catalyst can react with ozone as the active site forming the active oxygen (·OH, ·O 2 – , and 1 O 2 ), thereby efficiently degrading the organic pollutants in coking wastewater. Furthermore, a pilot-scale experiment on the catalytic ozonation of bio-treated coking wastewater was carried out using an Fe-Mn-Cu-Ce/Al 2 O 3 catalyst, while the effects of the initial pollutant concentration, ozone concentration, and gas flow on the COD removal rate were studied on a pilot scale. It was found that the COD removal rate of the wastewater was ∼ 60 % under optimal parameters. After the treatment, the wastewater steadily reached the coking wastewater discharge standard (COD < 80 mg/L), while the operating cost of catalytic ozonation reached ∼ 0.032$/m 3 , thereby paving the way toward economic engineering applications. The COD degradation kinetics in the bio-treated coking wastewater followed pseudo-second-order kinetics. Three-dimensional fluorescence and gas chromatography–mass spectrometry revealed that macromolecular organic pollutants in the bio-treated coking wastewater were greatly degraded. In summary, Fe-Mn-Cu-Ce/Al 2 O 3 exhibited good reusability, high catalytic activity, and low cost and has a wide application prospect in the treatment of coking wastewater.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2022
·Vol. 12
·期 11
·3670-3684
·
IF 6.177
Chunwang Lv,Mingjiang Hu,Tianhao Yuan,Liqiang Yan,Hongwei Chen
The objective of this work was to investigate and contrast the mechanism of different B-site dopants for catalytic activity and sulfur resistance under equivalent conditions. LaCo1−xMxO3 (M = Fe, Cr, Cu) perovskite-type catalysts were synthesized by a sol–gel method, and the optimized samples were tested for toluene oxidation before and after sulfur aging. The properties of the catalysts were investigated in detail by XRD, FT-IR, N2 adsorption–desorption, H2-TPR, XPS and in situ DRIFTS to elucidate the inner mechanisms of the catalytic reaction and poisoning processes. The results indicated that introducing specific metal cations with a suitable ratio into the B-site of perovskite could improve the catalytic activity and weaken the negative effect of SO2 poisoning. The reasons for the improvement of catalytic activity on different doped catalysts are similar and mainly lie in the change of reduction property, oxidation state of the B-site, and content of oxygen vacancies. However, the mechanism of sulfur resistance caused by different dopants is not identical. The introduction of different metal cations will cause certain differences in some factors such as reducibility, lattice stability, sulfur adsorption and sulfate content, thus leading to the differentiation of sulfur tolerance for doped perovskite catalysts. In this study, the optimization effect of Fe dopant is better than that of Cr and Cu dopants, illustrating that the high stability of the perovskite lattice and the insensitivity to sulfur species are the key factors for its outstanding sulfur resistance. The results provide insights into guiding the practical composition and life cycle optimization of perovskite-type catalysts in the industrial application of removing sulfur-containing VOCs.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2022
·Vol. 46
·期 25
·12372-12380
·
IF 3.925
Juan Chai,Luohao Yuan,Shiwei Wang,Tong Li,Mingxue Wu,Zhiwei Huang,Hongfeng Yin
Three metal–organic frameworks {[Cu6(L1)4(DMF)(H2O)2·5H2O]}n (1), {Cu3(L1)2(phen)2(H2O)}n (2) and {[Cu8(μ3-OH)3(L2)4(NO3)(H2O)5]·3H2O}n (3) utilizing nitrogen-containing heterocyclic carboxylate bifunctional ligands (L1 = 5-(4-carboxypyridin-3-yl)isophthalic acid and L2 = 2-(5-carboxypyridin-2-yl)terephthalic acid) were self-assembled hydrothermally and characterized. MOFs 1–3 possess 3D networks which consist of three different types of Cu clusters {Cu2O2(OCO)4}, {Cu2O2N4(OCO)2} and {Cu4O10(OCO)4}, respectively. MOFs 1–3 efficiently catalyze the oxidation of cycloalkanes under mild conditions. Besides, the synthesized MOFs 1–3 exhibited high peroxidase-like activity and could be utilized to catalyze the oxidation of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid ammonium salt) (ABTS) to produce green color in the presence of hydrogen peroxide (H2O2). The steady-state kinetics experiments of the oxidation of ABTS catalyzed by MOFs 1–3 were carried out, and the kinetic parameters were obtained. The results indicated that the affinity of MOFs 1–3 towards H2O2 and ABTS was higher than that of the natural horseradish peroxidase (HRP). The as-prepared MOF 1 can be applied for the colorimetric detection of H2O2 with a wide linear range of 0.5 to 200 μM and a limit of detection (LOD) of 0.097 μM. Therefore, the novel Cu-MOFs could be regarded as promising artificial enzyme mimics in catalysis, sensors and environment analysis.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2022
·
IF 9.224
Yingying Yang,Jingyu Xu,Yanzhu Guo,Xing Wang,Ling-Ping Xiao,Jinghui Zhou
Laccase is a highly versatile multicopper oxidase for lignin biodegradation. Using nanomaterials to realize functional laccase simulations is attractive for applications and fundamental research. Herein, this study reports a facile strategy to fabricate a Cu metal–organic framework (MOF) by using copper as a metal center with guanosine 5′-monophosphate (GMP) as organic ligands (Cu/GMP). This obtained catalyst exhibits excellent chemoselectivity for lignin depolymerization into oligomers with low molecular weights at room temperature and atmospheric pressure. It was found that Cu/GMP shows superior laccase-like activity, which is beneficial for the C–O bond cleavage within lignin, thus affording oligomers in a high yield (81.7 wt %). Furthermore, the effects of the obtained lignin oligomers on the oxidative stability of canola oil biodiesel were evaluated. They were novel, renewable, and of low cost, which as biodiesel additives exhibited high potential in replacing expensive merchand biodiesel antioxidants commonly used to date.
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2025
·
IF 3.9
Jinfeng Chen,Qingze Zhang,Yuanhong Zhong,Zhaoying Wang,Yakun Guo,Ming Sun,Lin Yu
To address the limitations of molecular sieves and metal oxides in the NH3-SCR of NOx, we synthesized a novel hybrid catalyst by integrating FeNbCe metal oxides with Cu-SSZ-13. The FeNbCe comodification significantly enhanced the low-temperature performance and sulfur resistance of Cu-SSZ-13 while maintaining 100% N2 selectivity across a broad activity window. The incorporation of Fe, Nb, and Ce reduced weak-acid and Lewis-acid sites while increasing strong Brønsted-acid sites, crucial for catalytic activity. The FeNbCe/Cu-SSZ-13 catalyst exhibited an enhanced surface oxygen content and redox capacity, promoting the “fast SCR” pathway and improving N2 selectivity at low temperatures. The FeNbCe oxides synergistically reacted with SO2, protecting Cu2+ active sites from sulfur poisoning and maintaining 100% NOx conversion for 4 h after SO2 introduction, maintaining 85% within 24 h. In situ DRIFTS characterization confirmed the dominance of the Langmuir-Hinshelwood (L-H) mechanism. The FeNbCe modification represents a significant advancement in the field of NH3–SCR catalysis, offering a practical and effective solution to enhance the performance of Cu-SSZ-13 while addressing key challenges such as sulfur resistance and low-temperature activity.
✓ 已验证
产品关联
DOI
高影响因子
BIOELECTROCHEMISTRY
·
2026
·
IF 4.9
Yaping Zhang,Xiaohui Zhai,Heran Ma,Yanju Liu,Yang He,Huaixia Yang
An dual-mode biosensor for DR1 detection was prepared. • Cu-MOF and AuPt@PBA were used to amplify the signals. • The dual-mode improves the accuracy of the biosensor. • The proposed biosensor has high sensitivity, strong selectivity and good stability. Hashimoto's thyroiditis (HT) is a prevalent autoimmune disorder that increasingly threats human health and quality of life. As down-regulator of transcription 1 (DR1) is a key biomarker for HT, developing efficient DR1 detection methods is crucial for monitoring disease progression. Here, a novel ratiometric electrochemical-colorimetric dual-mode biosensor was constructed using Cu-based metal-organic framework (Cu-MOF) and AuPt-modified prussian blue analog (AuPt@PBA), enabling ultrasensitive and accurate determination of DR1. Cu-MOF was employed as an internal reference signal for electrochemistry, thereby enhancing the signal accuracy. AuPt@PBA can not only provide redox signals in electrochemical analysis, but also generate colorimetric signals in the presence of H 2 O 2 due to its stable peroxidase-like activity, endowing the nanomaterial with excellent dual-mode sensing performance. Under optimized conditions, the biosensor exhibits a wide linear detection range of 1 × 10 −1 pg/mL to 1 × 10 5 pg/mL in the ratiometric electrochemical mode and 1 × 10 −1 pg/mL to 1 × 10 4 pg/mL in the colorimetric mode, with limits of detections (LODs) as low as 13.6 fg/mL and 28.9 fg/mL, respectively. The cross-validation between these two modes further improves the reliability. Moreover, the dual-mode biosensor demonstrates superior stability and strong anti-interference capability. Consequently, the biosensor holds potential for practical applications.
✓ 已验证
DOI
高影响因子
MINERALS ENGINEERING
·
2022
·
IF 5.479
Lianghua Wang,Pingfeng Fu,Yanhong Ma,Xuejin Zhang,Yabao Zhang,Xiumin Yang
Flotation reagents and heavy metal ions always coexist in mineral flotation wastewaters, arousing serious environmental issues or having deleterious effects on mineral flotation. In this work, the steel slag was adopted as a cost-effective adsorbent to synergically remove butyl xanthate (BX), diethyl dithiocarbamate (DDTC), Cu(II) and Pb(II) ions. At the steel slag dosage of 12.0 g/L, Cu(II) and Pb(II) concentrations decreased from 4.0 mg/L to below 10.0 μg/L, and the removal of COD reached 54.33%. The removal efficiency of COD increased from 11.36% to 57.49% as Cu(II) and Pb(II) concentrations rose from 0 to 8.0 mg/L, revealing the promotion effects of metallic ions on collector adsorption. The maximum uptake capacity of steel slag reached 110.45 and 160.48 mg/g for Cu(II) and Pb(II), respectively. The collector adsorption capacity of steel slag increased nearly two magnitudes after modifying with the uptake of Cu(II) or Pb(II) ions. The SEM/EDS, XPS and FTIR analysis indicated that steel slag could be in-situ modified to generate copper or lead hydroxides and oxides during the removal of Cu(II) and Pb(II) ions. Subsequently, these precipitates acted as reactive sites for chelating BX and DDTC to form indissolvable metal-collector chelates. Owing to in-situ modification of steel slag by uptaking metallic ions, the adsorption was potentially feasible for treating flotation wastewaters.
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2021
·
IF 3.785
Yongxin Zhang,Zhiyong Huang,Tian Gan,Nianjun Hou,Lijun Fan,Xin Zhou,Ge Gao,Jingyu Li,Yicheng Zhao,Yongdan Li
Cu Ce 0.8 La 0.1 Sm 0.1 O 2-δ and Cu Ce 0.8 Nd 0.1 Sm 0.1 O 2-δ are studied as anode materials for solid oxide fuel cells with methanol as fuel. The oxygen surface exchange and bulk diffusion coefficients of Ce 0.8 Sm 0.2 O 2-δ both increase with La and Nd doping. The CH 3 OH temperature-programmed surface reaction results show that the addition of La and Nd accelerates the chemical oxidation of CH 3 OH. Furthermore, compared with Cu Ce 0.8 Sm 0.2 O 2-δ , the anodes with La and Nd show higher resistance to coking in CH 3 OH atmosphere. The Cu-based cermet anode exhibits a low catalytic activity for the electrochemical oxidation of H 2 , and a single cell supported by a Ce 0.8 Sm 0.2 O 2-δ ‑carbonate composite electrolyte with Cu Ce 0.8 Sm 0.2 O 2-δ anode exhibits a maximum power density of 160 mW cm −2 at 650 °C using dry hydrogen as fuel. However, the maximum power density reaches 550 mW cm −2 when CH 3 OH is used as fuel, and further increases to 730 and 830 mW cm −2 with the addition of La and Nd in the anode, respectively. The results indicate that with the promotion of the oxygen activity, the Cu-based cermet is a promising anode material for solid oxide fuel cells using CH 3 OH as fuel.
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2015
·Vol. 22
·期 8
·1-10
·
IF 1.92
Li Luzhong,Wang Zhu,Ma Piming,Bai Huiyu,Dong Weifu,Chen Mingqing
A novel bio-adsorbent, composite hydrogel beads, composed of polyvinyl alcohol (PVA), chitosan (CS) and graphene oxide (GO) was prepared by an instantaneous gelation method. The micromorphology and thermal stability of the PVA/CS/GO hydrogel beads were characterized by scanning electronic microscope (SEM) and thermo gravimetric analysis (TGA) respectively. Adsorption of Cu(II) onto PVA/CS/GO hydrogel beads was investigated with respect to pH, initial concentration, temperature and adsorption time. Adsorption data were well matched by Langmuir isotherm and pseudo-second-order kinetic model at the optimum pH 5.5. The maximum adsorption capacities of PVA/CS/GO hydrogel beads were found to be 162 mg g −1 for Cu(II) at 30 °C, which was much higher than that of PVA/CS hydrogel. Thermodynamic studies indicated that the adsorption was spontaneous and endothermic process in nature. Besides, desorption efficiency and reusability of the adsorbents were assessed on basis of six consecutive adsorption-desorption cycles. Based on these studies, it can be seen that PVA/CS/GO hydrogel beads will be a potential recyclable adsorbent for removal of hazardous metal ions in waste water.
✓ 已验证
DOI
高影响因子