Journal of Orthopaedic Surgery and Research
·
2024
·Vol. 19
·期 1
·1-13
·
IF 2.8
Huang Fenglan,Wang Yiteng,Liu Jinzhu,Cheng Ye,Zhang Xiaonan,Jiang Haoli
Background Osteoporosis is a metabolic bone disease that has a common occurrence in postmenopausal women. Asperuloside (ASP) has been reported to exert anti-inflammatory and anti-oxidative effects in numerous diseases, such as rheumatoid arthritis and acute lung injury. However, whether ASP plays a role in osteoporosis has not been addressed.Methods In vivo, ovariectomy (OVX) was used to induce mouse osteoporosis. Then, the mice were treated with 20 and 40 mg/kg ASP. In vitro, MC3T3-E1 cells were treated with 0, 1, 10, 20, 40 and 80 µM ASP. We chose 20 and 40 µM for further experiments due to no significant effects on cell viability.Results The data indicated that ASP reduced osteoporosis in OVX mice and promoted osteogenic differentiation and mineralization in MC3T3-E1 cells. In addition, we explored that ASP protected against osteoporosis via inducing autophagy and activating Nrf2.Conclusion ASP alleviates OVX-induced osteoporosis by promoting autophagy and regulating Nrf2 activation.
✓ 已验证
DOI
PubMed
高影响因子
Biomass Conversion and Biorefinery
·
2024
·
IF 3.5
Chen Xia,Xin Shanzhi,Hu Yang,Huang Fang,Liu Xiaoye,Mi Tie
With the extensive application of herbal medicine worldwide, a large amount of herbal medicine waste (HMW) is generated each year. In this study, pellets are produced using HMW feedstocks with modified starch, sodium silicate, and carboxymethyl cellulose as the binders. The quality and thermal decomposition characteristics of the pellets are studied. The results show that the binder can improve the quality of the pellets, which facilitates storage and handling. The effects of organic binders are stronger than those of inorganic binders. The relaxation density, compressive strength, and durability characteristics of the pellets are linearly correlated with the amount of binder added. At a content of 2 wt.%, all the pellets meet the commercial standard quality. The maximum weight losses for pellets pyrolysis occur at 338 ~ 346 °C with the mass loss rates of 4.92 ~ 5.28%/min, while that for combustion is at 298 ~ 305 °C and 17.49 ~ 28.55%/min. The binder slows the volatilization process and reduces the pyrolysis activation energy of pellets from 209.71 kJ/mol to 134.53 ~ 175.39 kJ/mol. The activation energies for pellet combustion with and without binder are in the ranges of 17.43 ~ 63.70 kJ/mol and 22.79 ~ 67.52 kJ/mol, respectively. The comprehensive combustibility index ( S ) of the pellets with binder ranges from 5.29 to 8.17 × 10 7 % 2 /(min 2 ·°C 3 ). The results of this study indicate that pelletization is a feasible option for the treatment of solid HMW and the resultant pellets can be used as a sustainable solid fuel.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2025
·Vol. 16
·期 1
·1-11
·
IF 15.7
Cao Qinxuan,Feng Jianning,Fan Kezhou,Zhang Shuting,Zhang Jinzhong,Ma Baixu,Xue Jie,Li Xin,Wang Kang,Tao Lizhi,Sergeev Aleksandr,Yang Ye,Wong Kam Sing,Huang Yong,Lu Haipeng
Visible-light-absorbing semiconductor nanocrystals have shown great promise as photocatalysts for promoting photoredox chemistry. However, their utilization in organic synthesis remains considerably limited compared to small molecule photosensitizers. Recently, the generation of hot electrons from quantum-confined systems has emerged as a powerful means of photoreduction, yet the efficiencies remain limited under mild conditions. In this study, we present an efficient hot-electron generation system facilitated by the spin-exchange Auger process in Mn 2+ -doped CdS/ZnS quantum dots. These hot electrons can be effectively utilized in a wide range of organic reactions, such as the Birch reduction and reductive cleavage of C-Cl, C-Br, C-I, C-O, C-C, and N-S bonds. Notably, these reactions accommodate substrate reduction potentials as low as −3.4 V versus the saturated calomel electrode. Through two-photon excitation, we achieve the generation of a “super” photoreductant using visible-light irradiation power that is only 1% of that previously reported for molecular and quantum dot systems. By modulating the intensity of light output, the spin-exchange Auger process enables the on/off generation of hot electrons, allowing for programmable assembly-point cross-coupling cascades. Our findings demonstrate the potential of quantum-confined semiconductors in facilitating challenging organic transformations that were unattainable with molecular photocatalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2025
·Vol. 16
·期 1
·1-8
·
IF 15.7
Zhang Zhewei,Yao Jun,Shen Chenyang,Li Fengfeng,Deng Changshun,Zhao Taotao,Guo Xuefeng,Zhu Yan,Guo Xiangke,Xue Nianhua,Peng Luming,Ding Weiping
In typical heterogeneous catalytic reactions, catalysts, whether fixed or flowing, maintained their bulk and surface structures as stable as possible. We report here dynamic activation catalysts having continuously generate highly active sites in working, which enables a usually low active Cu/Al 2 O 3 catalyst for CO 2 hydrogenation, showing extraordinary catalytic performances. Using reaction streams in unusually high linear speed to blow and carry the Cu/Al 2 O 3 particulates to collide cyclically with a rigid target, the CO 2 conversion rate is more than three times enhanced at methanol selectivity promoted to 95% from less than 40% and the methanol space-time-yield is six times increased. By experimental and theoretical investigation, the dynamic activation of Cu/Al 2 O 3 is defined as a discrete condensed state with a distorted and elongated lattice, reduced coordination, and abnormal catalytic properties. We envision that continuous research on the dynamical activation catalysts will advance novel methods for promoting catalytic performance and discovering new catalytic reactions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RARE METALS
·
2025
·
IF 11
Han Ya,Yu Ying-Jian
Tin–air batteries (TABs) exhibit high safety and low cost, and are expected to be used in electric vehicles and portable electronic devices. However, challenges such as the irregular deposition of tin (Sn) particles on Sn anodes, surface passivation, and significant hydrogen evolution have hindered the development of high-performance TABs. To address these challenges, this study introduces quasi-solid TABs (QSTABs) with satisfactory high-temperature resistance. A conductive metal–organic framework (c-MOF), particularly Ni 3 (HITP) 2 , was synthesized and deposited onto the Sn anode surface. The porous structure of c-MOF increased the specific surface area of the Sn anode, improved electronic conductivity and facilitated the absorption and release of ions during charge and discharge cycling. Theoretical calculations revealed that Ni 3 (HITP) 2 provided more electron donor sites to coordinate with Sn 2+ and inhibited hydrogen release. Additionally, carboxymethyl cellulose (CMC) was incorporated into the organic gel polymer electrolytes (OGPEs) to significantly enhance their water retention, ensuring stable operation of QSTABs between 25 and 50 °C. Notably, QSTABs assembled with CMC-OGPE/Sn@Ni 3 (HITP) 2 exhibited a fine cycle life of over 200 cycles at 50 °C. The electronic c-MOF material effectively inhibited metal shedding and side reactions on the Sn anode. These findings provide valuable guidance for developing QSTABs with high-temperature resistance. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
BMC CANCER
·
2025
·Vol. 25
·期 1
·1-25
·
IF 3.4
Abd El-Kaream Samir Ali,Hassan Nasser Ali Mohamed,Saleh Hassan Saleh Abdullatif,Albahloul Mohamed Albahloul Salem,Khedr Abdalla Mohamed,El-Kholey Sohier Mahmoud
Background Micro-photodynamic therapy (MWPDT) combines photo-dynamic (PDT) and microwave-dynamic (MWDT) therapies with sensitizers, offers new avenues for cancer treatment. Despite the fact that novel sensitizers for MWPDT have been successfully synthesized, only a few are being employed effectively. The low tumor-targeting specificity, inability to transport sensitizer's deeper intratumorally, and deteriorating tumor microenvironment all restrict their anti-tumor efficacy. The current work was done aiming at microwave assisted drug delivery of titanium dioxide / rose Bengal conjugated chitosan nanoparticles (TiO 2 /RB@CSNP) for micro- photo-dynamic skin cancer (SKCA) treatment in vitro and in vivo as activated cancer treatment up-to-date modality. Materials and methods The study was conducted in vitro on human SKCA cells (A-375) and the study protocol application groups in vivo on Swiss albino mice treated with 7,12-dimethylbenz[a]anthracene (DMBA)/croton oil only and were not received any treatment for inducing SKCA, and only after SKCA induction the study treatment protocol began, treatment was daily with TiO 2 /RB@CSNP as MWPDT sensitizer with or without exposure to laser (IRL) or microwave (MW) or a combination of them for 3 min for two weeks. Results Revealed that CSNP can be employed as effective TiO 2 /RB delivery system that directly targets SKCA cells. Additionally TiO 2 /RB@CSNP is a promising MWPS for and when combined with MWPDT can be very effective in treatment of SKCA-A-375 in vitro (cell viability decreased in a dose-dependent basis, the cell cycle progression in G0/G1 was slowed down, and cell death was induced as evidenced by an increase in the population of Pre-G cells, an increase in early and late apoptosis and necrosis, and an increase in autophagic cell death) and DMBA/croton oil SKCA-induce mice in vivo (induced antiproliferative genes (caspase 3,9, p53, Bax, TNFalpha), suppressed antiapoptotic and antiangiogenic genes (Bcl2,VEGF respectively) effectively reducing the tumors growth and leading to cancer cell death as well as decreased oxidative stress (MDA), and ameliorated enzymatic and non-enzymatic antioxidants (SOD, GR, GPx, GST, CAT, GSH, TAC) as well as renal (urea, creatinine) and hepatic (ALT, AST) functions. This process could be attributed to MWPDT; microwave and/or photo-chemical TiO 2 /RB activation mechanism and antioxidant potential of non activated TiO 2 /RB as well. Conclusion The results indicate that TiO 2 /RB@CSNP has great promise as an innovative, effective delivery system for selective localized treatment of skin cancer that is activated by MWPDT.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Collagen and Leather
·
2025
·Vol. 7
·期 1
·1-18
·
IF 9.2
Xu Zhilang,Wang Xinxin,Liang Huaqian,Li Xinying,Li Derong,Mu Changdao,Ge Liming,Li Defu
Bacterial biofilm infection is a complicated and important global problem. Non-toxic biomass-based Pickering emulsions as an essential oil delivery system are a potentially effective means in biofilm treatment. Herein, the chitosan/gelatin complex nanoparticles (CGNPs) stabilized Pickering (CGP) emulsion loaded with cinnamon essential oil (CEO) was developed to inhibit and remove bacterial biofilms. CGNPs were initially successfully prepared with a particle size of 253.7 nm. Subsequently, CGP emulsions were prepared using CGNPs as the emulsifier and CEO as the oil phase, with the aqueous phase pH value of 5.5 and ionic strength of 50 mM. Amino groups of CGNPs were crosslinked with the aldehyde group of CEO via Schiff base reaction at the oil–water interface to form a denser core–shell structure, thus improving the stability of Pickering emulsion. The CGP emulsions exhibit controlled and long-term sustained release properties in essential oil delivery, with 89.8%, 81.0%, and 62.2% CEO release within 168 h for CGP-0.1, CGP-0.2, and CGP-0.3, respectively. Moreover, CGP emulsions have stronger antioxidant activities (nearly 100%), broad-spectrum antibacterial activities (> 90%), enhanced penetration and removal capabilities against preformed biofilms than single CEO or CGNPs, as well as its better biocompatibility than conventional surfactant-stabilized emulsions. Hence, CEO-delivered CGP emulsion could serve as a potential strategy against biofilm infections and bacterial resistance. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2025
·Vol. 60
·期 21
·8720-8733
·
IF 3.9
Zhang Wen-hua,Yi Bing,He Wen-xin,Ma Xiu-jia,Jia Yun-bo,Li Shi-qi,Guo Cai-wen,Wang Xue-wei
Industrial catalysts for the oxygen evolution reaction (OER) of water electrolysis are key to realizing green and clean hydrogen production. In this study, multivariate transition metal hydroxide catalysts with high-entropy structure were prepared, which exhibited optimized electrocatalytic performance and stability for water splitting in alkaline media. Using copper foam as the substrate, samples are obtained through the step-by-step combination and tuning of the multi-components. The electrochemical performance test results show that the optimized FeCoCuMoMnOOH catalyst exhibits an exceptional catalytic effect for the OER with an overpotential of 227 mV at a current density of 100 mA/cm 2 , much superior to the performance of FeCoCuOOH and FeCoCuMoOOH. In the 30-h timed current method test, the performance of the FeCoCuMoMnOOH catalyst is essentially non-decaying and shows good stability. The XPS results indicate that the metal components are stably combined to exist as a mixture of metal phases in the samples, which exerts a beneficial synergistic effect and offers more active sites. Meanwhile, Mn as an electron donor can increase the electron density and optimize the electron transport structure, which is conducive to the electrochemical reaction rate. This work sheds light on presenting an effective strategy for constructing multi-element high-entropy combinations with modulated component ratios, which provides a new idea for designing efficient and stable transition metal hydroxyl oxide catalysts. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2025
·
IF 3.9
Mo Jinpeng,Wen Hui,Zeng Zhiliao,Zhang Meilin,Huang Zhifeng,Wu Zhenyu,Chen Litong,Ou Junhui,Liu Xian,Wang Lihuan,Ma Chunping
Polylactic acid has shown great potential as a substitute for traditional petroleum-based polymers. Such an environmentally friendly polymer has promising application prospects in high-value-added environmental protection applications, including wastewater treatment and membrane separation. This research presents a novel type of polylactic acid composite fibrous membrane designed to address this issue. A hydrophilic layer with a hydrogen bond cross-linked structure was formed via electrospinning PLA/PEG fibers. Subsequently, the silicone-modified carbon nanotubes were dispersed in a pure PLA solution. This composite spinning solution was electrospun onto the prepared PEG/PLA fibrous layer to construct a hydrophobic layer, forming a composite fibrous membrane. The introduction of silicone-modified carbon nanotubes had enhanced the membrane’s hydrophobicity, so that the wetting behavior of the outer surface followed the Cassie–Baxter model. The water contact angles of the hydrophobic layer of the composite fibrous membrane reached 123.5° (in air) and 162.7° (under oil), respectively. The oil absorption capacity of the prepared fibrous membrane reached 66.2 g/g. The prepared fibrous membrane could absorb oil on the water surface, underwater, or in emulsions. The hydrophilic layer constructed by PEG/PLA fibers in the composite fibrous membrane effectively prevented the destruction of the composite fibrous membrane due to oil swelling. Therefore, the prepared dual-layer structure polylactic acid electrospun composite fibrous membrane can be a good candidate material for treating oily wastewater. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
Journal of Coatings Technology and Research
·
2025
·
IF 2.8
Ke Chong,Zhang Chenhua,Pan Liquan,Jiang Yongdong
Durable superhydrophilic antifogging coatings were fabricated via a simple wet chemistry process, based on a silane modified polysorbate (Tween®40) and a silica sol. The effects of the content of the modified Tween®40 on the coatings’ hydrophilicity and antifogging properties were investigated. Through the hydrolysis and condensation reactions between the modified Tween®40 and the silica sol, the coatings form a robust 3D network structure and demonstrate excellent antifogging performance and high mechanical property. The optimal coating with 80 wt.% M-T40 has a WCA of 1.7°. More importantly, it maintains its superhydrophilic and antifogging properties even after 500 cycles of abrasion as its WCA slightly rises from 1.7° to 3.5°. The coating exhibits excellent water resistance as well and can withstand up to 6 cycles of immersion-fogging test, demonstrating its considerable durability.
✓ 已验证
产品关联
DOI
高影响因子
WOOD SCIENCE AND TECHNOLOGY
·
2025
·Vol. 59
·期 6
·1-18
·
IF 3
Wang Wangxia,Wang Haoran,Niu Xiuxue,Wei Youhang,Cai Zhaosheng,Jiang Bo,Gu Feng,Zhu J. Y.
Wood, a renewable and eco-friendly resource, holds significant potential for developing sustainable structural materials. Nevertheless, in advanced engineering applications, natural wood often fails to meet requirements for mechanical performance and flame retardancy. Herein, we present a novel, simple yet highly effective strategy to fabricate tough flame-retardant wood (TF-wood). This approach involves partial delignification using alcohol-amine-based deep eutectic solvents (DESs), followed by N/P-functionalization of the dissolved lignin that is reincorporated into the wood matrix with subsequent hot-pressing. With the incorporation of 20% functionalized lignin, the resulting TF-wood demonstrates a remarkable increase in tensile strength (425.2 MPa), strain (2.9%), and the corresponding toughness reaching 8.1 MJ/m³, 27 times higher than that of natural wood. Additionally, the peak heat release rate (pHRR) of the TF-wood is reduced by 58.3%, and the total heat release (THR) is decreased by 47.8%. Crucially, TF-wood exhibits an ultralow water migration rate, further enhancing its structural stability in humid environments. These combined properties render TF-wood highly attractive for structural applications requiring enhanced fire safety and durability. This study paves the way for designing sustainable, high-performance building materials that integrate multiple functionalities.
✓ 已验证
产品关联
DOI
高影响因子
Human Cell
·
2025
·Vol. 39
·期 1
·1-17
·
IF 3.1
Guo Yan,Liu Ying,Zhou Mingkai,Zhao Yulan
Mitochondrial dysfunction is a key contributor to septic cardiomyopathy, driving myocardial inflammation and apoptosis. This study found that Sushi-repeat containing protein X-linked 2 (Srpx2) is associated with mitochondrial damage and is downregulated in the myocytes of lipopolysaccharide (LPS)-treated rats. Sprague Dawley rats were intraperitoneally injected with LPS (10 mg/kg) to establish a septic cardiomyopathy model. Adeno-associated viruses (8.5 × 10 11 vg/mL) containing Srpx2-overexpressing plasmids were injected into rats through their tail vein. Srpx2 overexpression improved hemodynamics and decreased myocardial damage in LPS-treated rats. H9C2 cells were treated with LPS (10 μg/mL) to establish an in vitro septic model. The cells were then transfected with Srpx2-overexpressing plasmids. Srpx2 overexpression ameliorated mitochondrial damage, which was evidenced by restoring mitochondrial morphology, enhancing the complex activities, and elevating ATP and mitochondrial membrane potential levels in cardiomyocytes. Srpx2 overexpression reduced mitochondrial reactive oxygen species levels and superoxide generation in cardiomyocytes. Srpx2 overexpression decreased cleaved caspase-3 and 9 protein levels. Tumor necrosis factor-α and interleukin-1 beta levels were also reduced in cardiomyocytes with Srpx2 overexpression, suggesting reversal of inflammation. The RNA-sequencing data indicated that Srpx2 might regulate the phosphoinositide 3-kinase (PI3K)/protein kinase B (AKT) pathway to protect cardiomyocytes. Srpx2 overexpression increased the p-PI3K and p-AKT protein levels. The treatment of H9C2 cells with 10 μM LY294002, a PI3K/AKT pathway inhibitor, reversed the protective effects of Srpx2 against mitochondrial damage and apoptosis. In conclusion, Srpx2 alleviates mitochondrial damage by activating the PI3K/AKT pathway, thereby reducing apoptosis and inflammation in septic cardiomyopathy. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子