Catalysis Science & Technology
·
2021
·Vol. 11
·期 14
·4953-4961
·
IF 6.119
Junyue Li,Ziyi Wang,Huayu Chen,Qiqi Zhang,Huilin Hu,Lequan Liu,Jinhua Ye,Defa Wang
Photocatalytic reduction of carbon dioxide (CO2) into hydrocarbon fuels has attracted increasing research attention in recent years. However, the fast recombination of photoinduced charge carriers and poor adsorption/activation capability of CO2 molecules limit the photoconversion efficiency. Herein, we report on loading a two-dimensional (2D) titanium carbide (Ti3C2) MXene as a noble-metal-free cocatalyst onto zinc oxide (ZnO) via a facile electrostatic self-assembly method for efficient CO2 photoreduction. It is interesting to find that the ZnO loaded with 7.5 wt% of surface-alkalinized Ti3C2 exhibited remarkably improved evolution rates of CO (30.30 μmol g−1 h−1) and CH4 (20.33 μmol g−1 h−1), which were approximately 7-fold and 35-fold those of bare ZnO, respectively. The surface-alkalinized Ti3C2 MXene is believed to play a crucial role in improving the separation/transfer of photoinduced charge carriers and the adsorption/activation of CO2 molecules, accounting for the superior photocatalytic activity of CO2 reduction. Our work demonstrates that the Ti3C2 MXene could be employed as a noble-metal-free cocatalyst for efficient photocatalytic CO2 reduction.
✓ 已验证
DOI
高影响因子
ACS Applied Energy Materials
·
2023
·
IF 6.4
Yuxuan Gao,Yafei Guo,Yekun Zou,Wenzhuo Liu,Yangna Luo,Bingqian Liu,Chuanwen Zhao
Copper-based catalysts have been recognized as promising candidates for electrochemical conversion of CO2 to value-added chemicals and synthetic fuels. Yet, the challenges of high overpotential and low product selectivity have motivated the rational electrode engineering. In the present work, we prepared CuS catalysts using different sulfur precursors, and we aimed to elucidate the precursor-dependent effect on their structure–property–activity relationships for electrochemical CO2 reduction. The different sulfur precursors exhibited varied S release rates in hydrothermal synthesis, which had induced distinct surface morphological features and diverse sulfur vacancy concentrations, and the intrinsic catalytic activity and product selectivity would be affected. The desired CuS-TU catalyst synthesized using thiourea as the sulfur precursor featured a flower-like morphology and had the highest sulfur vacancy concentration. The nanoflower morphology offered expanded space and considerable undercoordinated sites for facilitated interfacial mass transfer in electrochemical CO2 reduction. Density functional theory calculations confirmed that the abundant sulfur vacancy played an important role in strengthening the adsorption of the *COOH intermediates on the surface, which promoted CO production via the *COOH pathway. The CuS-TU catalyst therefore exhibited a relatively higher CO selectivity of 72.67% at −0.51 V vs RHE. These findings will provide more insights into improving the electrochemical CO2 reduction performance of copper-based catalysts by structure engineering.
✓ 已验证
DOI
高影响因子
SYNTHESIS-STUTTGART
·
2018
·Vol. 51
·期 03
·739-746
·
IF 2.722
Qing-Wen Song,Qing-Ning Zhao,Jing-Yuan Li,Kan Zhang,Ping Liu
It is promising and challenging to achieve the effective construction of carbonates using CO2 and a non-noble metal catalyst. Herein, selective catalytic conversion of CO2 and switchable alcohol candidates to produce linear or cyclic carbonates and α-hydroxy ketones via effective zinc catalyst was developed. A series of primary alcohols and cyclohexanol, 1,2-diols, and water can serve as nucleophiles to give alkyl or aryl 2-substituted-3-oxobutan-2-yl carbonates, substituted 1,3-dioxolan-2-ones, 3-substituted 3-hydroxybutan-2-ones, respectively with excellent selectivity and high yields.
✓ 已验证
DOI
高影响因子
Frontiers of Chemical Science and Engineering
·
2013
·Vol. 7
·期 3
·297-302
·
IF 0
Xiao Qiang,Tang Xiaodan,Liu Yefeng,Zhong Yijun,Zhu Weidong
A comparison study has been conducted on the strategies for synthesizing nanocrystalline Li 2 ZrO 3 and Kdoped Li 2 ZrO 3 absorbents for CO 2 capture at high temperatures, including solid-state and liquid-phase methods, citrate route, and starch-assisted sol-gel method combined with freeze-drying technique. The absorption properties, including uptake rate and absorption capacity, of synthesized absorbents were investigated by thermogravimetric analysis (TGA) at different CO 2 partial pressures. The nanosized Li 2 ZrO 3 crystals synthesized by the citrate route exhibit a faster uptake and a higher, nearly stoichiometric absorption capacity than those synthesized by the solid-state and liquid-phase methods. The doping of K into Li 2 ZrO 3 can significantly improve the uptake rate of CO 2 , especially at low CO 2 partial pressures. For the synthesis of K-doped Li 2 ZrO 3 , the citrate route has poor reproducibility and scalability, whereas the starch-assisted sol-gel method combined with freeze-drying technique is reproducible and easily scaled up, and the thus synthesized absorbents possess excellent CO 2 capture properties.
✓ 已验证
DOI
Journal of Cleaner Production
·
2023
·
IF 11.1
Jie Qi,Yang Ge,Qingping Li,Xin Lv,Xiaojiang Li,Na Wang,Hongsheng Lu
Paraffin wax has caused obvious detrimental consequences to the extraction for fossil fuels, and posed environmental challenge due to the absence of cleaner methods for paraffin wax removal. A cleaner and sustainable approach for paraffin wax removal was developed using the switchable polarity solvents (SPS). Three SPS with low polarity, including dipropylamine (DPA), ethylbutylamine (EBA), and dibutylamine (DNBA) were selected for paraffin wax removal. Compared with bubbling CO 2 into SPS straightway, the transformation of the polarity quantified by normalized polarity energy confirms the addition of water is benefit to enlarge the polarity scope. Paraffin wax is removed at the initial state and separated at the final state by CO 2 -induced polarity transformation of SPS. The dissolution rates for paraffin wax of DPA and EBA reached 0.071 g/min and 0.062 g/min, which surpassed that of traditional solvents, such as o-xylene (0.045 g/min) and Petroleum ether (0.017 g/min), indicating that these selected SPS is suitable for paraffin wax removal. The paraffin wax dissolution behaviors of SPS can be accurately matched using modified Apelblat models with root-mean-square deviation of 1.085%. With the addition of water, more than 99% of paraffin wax is separated from DPA and EBA by introducing CO 2 within 10mins, which is a better alternative method for energy-intensive distillation process . The introduction of water is indispensable for improving the separation efficiency, since it enlarged the polarity difference between solvents and paraffin wax. The thermal behavior of separated paraffin wax detected by Differential Scanning Calorimetry remained steady, and there were negligible residual solvents detected indicate the feasible separation of paraffin wax. Both SPS and water are recovered upon N 2 /80 °C, which retain good recyclability for paraffin wax removal. These findings confirms the applicability of SPS in the sustainable and cleaner removal of paraffin wax. The use of SPS provides an alternative and promising approach for paraffin wax removal for ensuring the demands of low-energy consumption and environment.
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2017
·
IF 6.035
Hui Li,Xiaoxu Ding,Yatao Zhang,Jindun Liu
The inherent defects of porous graphene (PG) formed during reduction etching process could serve as nanopores , making PG emerge a potential application for the preparation of micrometre-sized separation membranes . Here, we introduced PG as inorganic nanofiller to fabricate thin film nanocomposite (TFN) membranes for CO 2 capture via interfacial polymerization technique. The PG selective nanolayers not only possessed a good adhesion with polymers but also benefited from hydrogen bonding actions, simultaneously, thus ensuring the formation of high-efficiency molecular sieving passageway in the separation layer of membranes. Furthermore, the thin PG nanosheets were verified to have an significantly affect for permeability and selectivity of membranes (PG, 0.05 wt%, 1 bar), with exhibiting about 21% and 20.8% enhancement of the CO 2 permeance and the CO 2 /N 2 selectively compared to that of the membrane without PG separately. Simultaneously, the membrane also showed higher stability and the porous surface morphology of PG shortened greatly the gas transfer path. The approach offers a potential promising to exploit the ultra-thin film composite membrane for efficient gas separation.
✓ 已验证
DOI
高影响因子
Processes
·
2023
·Vol. 11
·期 10
·2827
·
IF 3.5
Chao Song,Yangang Sun,Li Zhang,Shuang Liu,Jinguo Wang,Wei An,Yong Men,Zhenrong Yan
The photoreduction of CO2to other products containing carbon through simulated photosynthesis is a promising area of research. However, given the complexity of the CO2photocatalytic reduction reaction, it is crucial to adjust the structure of the photocatalysts. The focus of this study was on creating NaOH-modified Bi2WO6nanosheet photocatalysts via a one-step hydrothermal route and using them to convert CO2into CO through photocatalytic reduction under the condition of not using an electron sacrifice agent. The results of characterizations and activity data showed that adding an appropriate amount of NaOH significantly improved the photoreduction activity of CO2, as seen in the BWO-2 catalyst. The efficiency of photocatalysts could be improved by tuning the band structure through the addition of an appropriate amount of alkali. This adjustment improves the separation of photogenerated carriers and controls the concentration of oxygen vacancy to reduce recombination. As a result, the photocurrent activity is highly enhanced, leading to better reduction performance compared to unmodified photocatalysts. In experiments, the CO yield of the modified photocatalyst BWO-2 remained above 90 μmol/g after four trials, indicating its effectiveness in reducing CO2. This study offers insights into the regulation of band structure in bismuth-based photocatalysts for efficient CO2reduction.Keywords:photocatalysis;band gap structure;sheet structure;alkali solution corrosion;CO2photoreduction
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 30
·25185-25190
·
IF 3.289
Zhi-Qiao Wang,Zhong-Ning Xu,Ming-Jian Zhang,Qing-Song Chen,Yumin Chen,Guo-Cong Guo
High-performance catalysts are the key factor for CO2 activation and conversion. In this paper, we systematically investigate the whole composition evolution process of Cu/SiO2 catalysts for CO2 hydrogenation. The precursor gradually evolved from amorphous Cu species to copper phyllosilicate, then to CuO with the increase of calcination temperature from ambient temperature to 700 °C. With the evolution of the precursor, the corresponding species after reduction were gradually evolved from Cu0 to Cu+, then to Cu0 again. The ratios of Cu+/(Cu+ + Cu0) are positively correlated with the catalytic activities. The Cu+ species derived from copper phyllosilicate were demonstrated to be crucial in achieving high-performance Cu/SiO2 catalysts for CO2 hydrogenation. The composition evolution has been demonstrated to be an efficient strategy to synthesize high-performance catalysts. This strategy of composition evolution can be applied to the synthesis of other high-performance Cu-based heterogeneous catalysts.
✓ 已验证
DOI
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2022
·Vol. 28
·期 68
·e202202044
·
IF 5.02
Hanghang Zhou,Ying Luo,Jun Xu,Lidan Deng,Zheng Wang,Hong He
Graphical The well-defined CaTaO 2 N single crystals with uniform particle size were successfully synthesized through a one-pot NaCl-assisted nitridation procedure. The performance of photocatalytic CO 2 reduction to CO by H 2 O under visible light was enhanced due to the high crystallinity of CaTaO 2 N and the modification with core-shell structured Ni−Ag bicomponent cocatalyst. Cubic-like CaTaO 2 N photocatalysts with high crystallinity and uniform particle size were successfully prepared by the flux-assisted nitridation method. The growth of CaTaO 2 N single crystals under different synthesis conditions was systematically investigated to understand the effects of the crystallinity and optical property on photocatalytic performance of CO 2 reduction. Moreover, the modification of CaTaO 2 N single crystals with core-shell Ni−Ag bicomponent cocatalyst by two-step decoration process gave a 2.4 times higher amount of CO evolution than the deposition of sole Ag cocatalyst, because of the synergistic effects of bicomponent cocatalyst on the interfacial electron transfer and surface catalytic process. This study provides a valuable way to construct high-crystalline photocatalysts with effective bicomponent cocatalyst for visible-light-driven CO 2 reduction with H 2 O.
✓ 已验证
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2022
·
IF 3.428
Xiaojie Song,Xiufang Wang,Weiwei Dong,Qishu Qu,Haichen Wang,Fan Yang
Solar-to-chemical energy conversion via heterogeneous photocatalysis is one of the effective approaches to tackle the growing environmental and energy challenges. Homogeneously dispersed silver nanoparticles (Ag NPs) and cadmium sulfide nanoparticles (CdS NPs) with average particle size not>20 nm were fabricated on the surface of titanium dioxide nanotubes (TNTs) (Ag/CdS/TNTs) with the help of sodium dodecyl benzene sulfonate (SDBS). Herein, more surface active sites are created on the surface of nanocomposites. The experimental results demonstrate that the photocurrent intensity of the nanocomposites obviously increased, which effectively improves the photocatalytic activity. The results of photocatalytic experiments indicated that using triethanolamine (TEOA) and acetonitrile (MeCN) as sacrificial agents, the nanocomposites afford the CO yield from CO 2 (1455.6 μmol‧g −1 ‧h −1 ). Besides, Ag/CdS/TNTs nanocomposites displayed the H 2 evolution rate of 3700.57 μmol‧g −1 ‧h −1 , which was twice as much as pure TiO 2 NPs. The increase in the photocatalytic ability of the nanocomposites is basically attributed to the three materials formation S-scheme heterojunction which reduce the recombination probability of the photo-induced electrons and holes and thus enhances the photocatalytic activitys. Ultimately, a photocatalytic reaction mechanism is proposed for Ag/CdS/TNTs nanocomposites in the reduction of CO 2 .
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2022
·
IF 4.889
Lele Yang,Hong Chen,Yuntao Xu,Rong Qian,Qiao Chen,Yuanxing Fang
The efficiency of hydrogen peroxide evolution reaction (H 2 O 2 ER) by photoanodic water oxidation is normally limited by low yield and poor selectivity. In this work, the surfaces of Mo doped BiVO 4 are modified by Co 2+ and PO 4 3- ions (CPMB), which has been used as the photoanode with improved H 2 O 2 yield and selectivity. The optimal evolution rate of the CPMB is ca. 0.23 µmol·min −1 ·cm −2 , corresponding to 2.5 times to the pristine BiVO 4 photoanode, and the faradaic efficiency of CPMB photoanode for H 2 O 2 ER is ca. 26%. In this study, the mechanism for the improved H 2 O 2 evolution performance of CPMB has been investigated, indicating that PO 4 3- ions mainly promote the formation of the •OH by dissociation of H 2 O, while Co 2+ ions accelerate the conversion of the •OH for the subsequent H 2 O 2 evolution. This study offers the strategy for designing an efficient photoelectrochemical system with optimized solar conversion efficiency for H 2 O 2 production.
✓ 已验证
DOI
高影响因子
GREEN CHEMISTRY
·
2023
·Vol. 25
·期 10
·3966-3973
·
IF 9.8
Huajian Feng,Qingyong Tian,Junhao Huang,Xinwei Cui,Jingyun Jiang,Yapeng Tian,Li Ye,Qun Xu
Two-dimensional (2D) transition metal carbides, nitrides, or carbonitrides, regarded as MXenes, hold great promise for an extensive range of applications such as efficient catalysis and energy conversion and storage materials. Up to now, various strategies for synthesizing MXenes have been explored, typically including an F-containing aqueous etching process, a molten salt etching method, etc. In this work, for the first time, we have designed a novel solid-phase etching approach to synthesize two-dimensional titanium carbide (MXenes) sheets with the assistance of supercritical CO2 (SC CO2), and the solid-phase etching mechanism behind the efficient fabrication process has also been revealed from a series of characterization methods. It is demonstrated that SC CO2-coated FeF3·3H2O can successfully help realize the delamination of multilayer MXenes into single-layer or few-layer MXenes, and at the same time, the as-prepared MXene sheets are demonstrated to have large surface area and size, high quality and rich fluorine termination groups, which make them efficient in the alkaline hydrogen evolution reaction (HER).
✓ 已验证
DOI
高影响因子