COMPOSITES PART B-ENGINEERING
·
2025
·
IF 14.2
Hegeng Wei,Zebo Li,Yifan Yao,Wentao Li,Yangbin Fang,K.N. Tu,Guannan Yang,Yu Zhang,Guanghan Huang,Chengqiang Cui
Graphene oxide (GO) has emerged as a promising reinforcement material for metal matrix composites due to its exceptional properties. However, achieving homogeneous graphene dispersion within the metal matrix remains a critical challenge that significantly impacts the performance of the composite. In this study, we developed an innovative dual-dispersion medium approach to fabricate Cu@Ag/GO composites. The Cu@Ag particles and GO sheets were dispersed in ethanol in deionized water separately, followed by ultrasonic-assisted mixing and hot-press sintering to create a three-dimensional GO network structure. Experimental results indicate that the dual-dispersion method is conducive to the uniform attachment of GO to the silver-coated copper surface through hydrogen bonding, thereby reducing structural defects and effective effectively inhibiting Ag dewetting. The optimized composite containing 0.2 wt% GO exhibited significantly enhanced sintering properties compared to Cu@Ag: a shear strength of 94.3 MPa (50.2% improvement), thermal conductivity of 240.0 W/(m·K) (60.5% improvement), and reduced electrical resistivity of 4.7 μΩ·cm (38.8% decrease). This facile fabrication method of Cu@Ag/GO composites offers significant potential for developing high-performance die-attach and interconnect materials with superior mechanical strength, thermal transfer, and electrical conductivity for advanced power module applications.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry B
·
2025
·
IF 5.7
Shaoxiong Feng,Xu Peng,Xu Wei,Yiqing Deng,Xinyun Pu,Xi Gao,Xixun Yu
Reconstructing inflammatory bone defects using stem cell-based therapy faces challenges posed by the oxidative stress microenvironment. Here, inspired by the response mechanism of the intracellular antioxidant defense systems (IADS), we propose MOF nanozymes that mimic the structure of horseshoe crab hemocyanin and find that a ligand engineering strategy can modulate the SOD- and CAT-mimicking activities of MOF-based nanozymes. Through in vitro screening, the most efficient Cu-Imi nanozymes were selected and incorporated into a smart hydrogel (composed of oxidized dextran and dopamine-functionalized gelatin) for inflammatory bone defect treatment. Studies demonstrate that smart hydrogels are able to respond to the acidic microenvironment induced by oxidative stress and early tissue injury by intelligently releasing biomimetic nanozymes, which can effectively eliminate bacteria, alleviate inflammation, and reduce ROS levels. In addition, the smart hydrogel can effectively sustain stem cell viability and osteogenic differentiation in elevated ROS environments, and has the potential to promote angiogenesis and modulate the inflammatory microenvironment during rat bone tissue regeneration. We believe that this smart hydrogel-like material decorated with antioxidant enzymes offers a promising avenue for treat various inflammation-associated disorders, including arthritis, chronic wound and bone fractures.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Environmental Science-Nano
·
2025
·
IF 5.1
Junjie Yang,Jun Xie,Junxian Qin,Jin Shang,Hiromi Yamashita,Daiqi Ye,Yun Hu
To address the critical challenges in photocatalytic CO2 reduction systems, including rapid recombination of photogenerated electron–hole pairs, indiscriminate product distribution, and oxidative degradation of liquid-phase intermediates, we designed a ZIF-8-derived Ni–Cu bimetallic modified TiO2 (NiCu-GC-TiO2) photocatalyst for synergistic formate synthesis from CO2 and ammonia nitrogen wastewater The research results indicate that Ni–Cu forms a highly dispersed interface through N bridges, significantly enhancing charge separation efficiency. In the NH3-N system at pH = 10, the formate yield reached 116.2 μmol L−1 (99.4% selectivity), which was 9.4 times higher than that of TiO2. Ammonia nitrogen serves as an oxidative substrate that accelerates hole consumption while inhibiting formate oxidation. Isotope experiments confirmed that formate protons originate entirely from ammonia nitrogen, and the protons released from ammonia nitrogen oxidation drive the directed conversion of CO2 to formate. The system can directly utilize HCO3− as a carbon source, compatible with industrial carbon capture processes. Cycling tests and flow-phase experiments demonstrated excellent material stability and practical applicability. This research provides a novel strategy for synergistic mechanisms between photocatalytic CO2 reduction and wastewater treatment, which contributes to both environmental sustainability and energy utilization.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Yuanzhi Yue,Guozhe Sui,Yan Zhuang,Dongxuan Guo,Shuang Meng,Dantong Zhang,Xue Yang,Ning Liu,Yue Li,Jinlong Li
In this study, we developed a synergistic modulation strategy through in situ dual-anion/cation doping coupled with vacancy engineering, demonstrating a direct ammonia etching approach to synthesize Cu/S-In(OH) 3 with controlled indium vacancies (V In ) from CuInS 2 precursors. This in situ doping approach provides a uniform distribution of Cu cations and S anions throughout the material, overcoming conventional doping heterogeneity. Simultaneously, an indium vacancy (V In ) structure was precisely engineered and regulated through a growth limitation strategy. The synergistic interplay between the uniformly dispersed anions, cations and V In significantly suppresses the recombination of photogenerated carrier within In(OH) 3 , thereby allowing more carriers to participate in the surface catalytic reaction. Both experimental and theoretical analyses demonstrate that the introduction of V In into the defective states leads to a direct reduction in the band gap, significantly improving photocatalytic hydrogen evolution performance. The optimized Cu/S-In(OH) 3 with V In achieves a photocatalytic hydrogen production rate of 1.22 mmol g −1 h −1 , approximately 122 times higher than that of pure In(OH) 3 (0.01 mmol g −1 h −1 ). This work establishes a paradigm of integrating in situ doping and vacancy engineering strategies to rationally design In(OH) 3 -based materials, offering generalizable principles for advanced catalytic applications.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2025
·
IF 6.3
Aidi Xie,Jia Zhang,Chun Chen,Yunxia Zhang,Haimin Zhang,Huijun Zhao,Guozhong Wang
Semi-hydrogenation of syngas-based dimethyl oxalate (DMO) to valuable methyl glycolate (MG) intermediate has attracted considerable attention recently, while the yield of MG remains a challenge due to thermodynamically favorable continuous hydrogenation of DMO to ethylene glycol (EG). Silver catalysts were reported to be effective but suffered from low stability. Herein, we precisely designed an amino-functionalized mesoporous silica (NH 2 -MS) nanospheres-encapsulated Cu-Ag bimetallic catalyst (CuAg@NH 2 -MS) by a hybrid strategy of EDTA-modification and vacuum-impregnation. The designed bimetallic catalyst exhibited the best compromise between conversion and selectivity with a high MG yield of ∼96.3%, outperforming the unmodified CuAg@MS and mono-metallic Cu@NH 2 -MS and Ag@NH 2 -MS catalysts. Transmission electron microscope analysis revealed that amino-functionalization can effectively disperse and stabilize Cu-Ag nanoparticles. Hydrogen temperature-programmed reduction and X-ray photoelectron spectroscopy confirmed enhanced electron transfer between Cu and Ag species, as well as between Cu-Ag nanoparticles and the NH 2 -MS support. The highly dispersed active metals and enhanced electron interaction ultimately enabled a high MG yield by breaking the trade-off between DMO hydrogenation activity and MG selectivity. This robust catalyst also exhibited remarkable stability in continuous operation for 300 h in a fixed bed reactor. This work will facilitate precise construction of stable metal nano-catalysts for efficient catalytic selective hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Wenying Zhang,Jingjing Su,Wenran Zhou,Runan Chen,Yihua Zhao,Pengchao Sun,Yongxing Zhao
Rheumatoid arthritis (RA) is a chronic autoimmune disorder characterized by synovial inflammation and joint destruction. The pathogenesis is fundamentally driven by the tumor-like proliferation of fibroblast-like synoviocytes of RA (RAFLS), which agitates chronic inflammatory cascades and progressive tissue destruction. Cuproptosis is a new cell death pathway that relies on copper (Cu) ionophores to transport Cu into cells and has emerged as an attractive strategy for disease intervention. Herein, we first revealed hyperactive glycolysis as a key mechanism to resist cuproptosis in RAFLS by single-cell RNA sequencing. Accordingly, we proposed a hypothesis that inhibiting glycolysis could amplify cuproptosis, which was validated by utilizing PFK15 as a glycolysis inhibitor and elesclomol-copper (ES-Cu) as a cuproptosis inducer. Subsequently, a biomimetic liposome (EC/P@L-RFM) was developed to specifically codeliver ES-Cu and PFK15 to RAFLS by the fusion of RAFLS membrane (RFM) with the dual drug-encapsulated liposome. In vitro, ES-Cu-driven cuproptosis was potently boosted by PFK15-mediated glycolysis blockage and specifically induced cell death in RAFLS following the RFM fusion, which was attributed to enhanced tricarboxylic acid cycle flux by activating the glutamine-glutamate-α-ketoglutaric acid metabolic axis. In vivo, EC/P@L-RFM significantly alleviated RA symptoms by simultaneously suppressing glycolysis and amplifying cuproptosis, reaffirming the therapeutic potential of EC/P@L-RFM for RA.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Yu Ma,Haitao Zhang,Haizhou Zhang,Xinyuan Ren,Xiaochun Ma,Xiaoming Zhou,Yanlu Mu,Jiemei Yu,Taizhong Huang
Developing non-precious metal based catalysts is one of the most feasible ways to accelerate the application of hydrogen production technology by full water electrolysis with low-cost and high efficiency. In this work, hollow nanosphere structured Fe–Cu–Co trimetallic selenide based catalysts were successfully prepared by one-step hydrothermal method. The hollow nano-spherical shell structure was examined by using XRD, Raman, BET, SEM, TEM, XPS, etc. technologies. The catalytic performance for hydrogen evolution reaction (HER) of the catalysts was tested by LSV, Tafel, CV, EIS, i-t , etc . methods. The overpotential of FeCo 0.1 Cu 0.9 Se 2 catalyzed HER was only 191 (alkaline) and 112 mV (acidic) at 10 mA/cm 2 . The corresponding Tafel slope for HER is 180 mV/dec (alkaline) and 110 mV/dec (acidic), respectively. In addition, the FeCo 0.1 Cu 0.9 Se 2 also showed excellent long-time running stability. The current decay after continuous running 12 h in 0.5 M H 2 SO 4 and 0.1 M KOH electrolytes are 0.07 % and 0.271 %, respectively. FeCo 0.1 Cu 0.9 Se 2 catalyst with the hollow nanospherical structure exhibited excellent catalytic activity for HER. Density functional theory calculations show that the introduction of Co and Cu adjusted the electronic structure of FeCo 0.1 Cu 0.9 Se 2 and the special hollow nano-spherical structure provides enough active catalytic sites for HER. The nano-spherical structured multi-metal selenides show great potential to be high performance catalysts for HER in both alkaline and acidic electrolytes.
✓ 已验证
DOI
高影响因子
CORROSION SCIENCE
·
2025
·
IF 8.5
Jiahui Ma,Yating Huang,Jie Cheng,Qinhua Miao,Jinchi Chen,Shirong Ge
Cu and Co serve as interconnect metals in back-end-of-line (BEOL) integrated circuit fabrication. Chemical mechanical polishing (CMP) achieves planarization through chemical oxidation and dissolution by slurry components, which inevitably causes excessive corrosion and surface defects. Consequently, a critical aspect of metal CMP slurry engineering involves suppressing surface defects from both electrochemical and triboelectrochemical effects. Selecting effective corrosion inhibitors is crucial for optimizing both material removal rate and surface quality. In this work, typical azole inhibitor 1, 2, 4-triazaole (TAZ) was systematically evaluated for both the Cu and Co polishing slurries. Corrosion kinetics and thermodynamic parameters were determined by analyzing temperature-dependent corrosion current density variations. Electrochemical results demonstrate that TAZ significantly elevates apparent corrosion activation energies from 13.84 to 20.98 kJ·mol⁻¹ for Co and 13.51–44.78 kJ·mol⁻¹ for Cu, while achieving superior inhibition efficiency for Cu ( η = 80.97 % at 2 mM) compared to Co ( η = 30.68 % at 10 mM). KPFM and DFT calculations confirm substantially increased work function on Cu surfaces even at low TAZ concentrations. Moreover, triboelectrochemical measurements reveal divergent friction-driven mechanisms where mechanical action enhances cathodic processes on Co, shown by positive OCP shifts, but promoting anodic dissolution on Cu through negative OCP shifts. TAZ effectively mitigates tribocorrosion by forming lubricating adsorption layers that reduce coefficients of friction by over 40 % and suppress material loss. These insights provide a fundamental basis for the rational screening and selection of inhibitors optimized for dynamic CMP conditions.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Fanghai Liu,Hui Jiang,Zhanchuang Lu,Yanpeng Gao,Jiafa Li,Lin Zhou,Syed Aamir Hussain,Ping Chen,Xianghua Wang,Lei Chen
It is promising to develop next-generation indoor and outdoor flexible electroluminescent light sources, as thin as wallpaper, by converting electric energy into light directly based on semiconductor quantum dots (QDs). This work reports a sunlike full-spectrum electroluminescent white light-emitting diode (WLED) fabricated by spin-coating the mixture of yellow-green, red, and blue QDs at once, adopting the device structure of ITO/PEDOT:PSS/PVK(PTAA)/Mixed QDs/ZnO:Mg (AP-ZnO)/Al(Ag). The yellow-green and red QDs are prepared by coating three-layer ZnS shells on the CuInS2 cores, which are synthesized using sulfur powder and dodecanethiol (DDT) as sulfur source, respectively. The blue QDs are prepared by coating three-layer ZnS shells on ZnCuGaS2 cores. The photoluminescence quantum yield (PLQY) of the yellow-green, red, and blue QDs is 82%, 89%, and 83%, respectively. The WLED emits warm white light with a color temperature of 3000 K, chromaticity CIE (0.4228, 0.4287), and color rendering index (CRI) Ra 92.4. The electroluminescence spectrum of the device, whose similarity to the solar spectrum reaches 91.7% in the wavelength region of 450–700 nm, is rich in the red component and poor in the blue component, showing great potential for future healthy lighting applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF EXPERIMENTAL & CLINICAL CANCER RESEARCH
·
2025
·Vol. 44
·期 1
·1-25
·
IF 12.8
Wang Pengyu,Guo Weihua,Liu Shuyue,Li Shouyi,Li Jiaqi,Ding Bowen,Yin Fengyi,Yang Yang,Li Xingjiang,Cao Pei,Ma Chaozhe,Zhang Wanying,Song Yidan,Geng Yating,Liu Lantao,Hu Jing,Hao Jihui,Feng Yukuan
Background Copper accumulation triggers mitochondrial-driven cell death, known as cuproptosis, offering a promising mechanism for targeted cancer therapy. Recent studies have highlighted the critical role of intratumoral copper levels in regulating the expression of programmed cell death ligand-1 (PD-L1), suggesting that copper-induced cuproptosis not only enhances cancer cell death but may also amplify the effects of anti-PD-L1 antibodies (αPD-L1). However, in tumors where monotherapy with αPD-L1 shows limited efficacy, particularly in pancreatic ductal adenocarcinoma (PDAC), the role of copper-induced cuproptosis in enhancing αPD-L1 treatment efficacy and its underlying mechanisms remain unclear. Meanwhile, inadequate tumor drug accumulation and glycolysis significantly restrict the efficacy of cuproptosis. To address these challenges, we have synthesized a novel nanozyme, Pt@PCN-Cu, designed to stabilize intracellular copper accumulation and effectively induce cuproptosis. Additionally, we aim to determine whether this strong induction of cuproptosis can synergize with αPD-L1 to enhance cancer therapy, ultimately paving the way for novel strategies to improve PDAC treatment. Methods Pt@PCN-Cu was synthesized via a one-pot method, and its therapeutic potential was assessed in combination with αPD-L1 for the treatment of PDAC. Initially, the material’s properties were characterized, and its efficient cellular uptake was confirmed. Anti-tumor efficacy was evaluated by inducing cuproptosis in PDAC cell lines and xenograft models. RNA sequencing (RNA-seq) was utilized to identify key regulators involved in the modulation of PD-L1 expression by cuproptosis. Lastly, the therapeutic efficacy of Pt@PCN-Cu combined with αPD-L1 was evaluated in vivo, focusing on tumor growth inhibition and immune modulation within the tumor microenvironment (TME). Results Pt@PCN-Cu demonstrates excellent physicochemical properties and remarkable cascade catalytic activity, providing a solid foundation for further in vitro and in vivo studies. In vitro, Pt@PCN-Cu efficiently transports copper and induces cuproptosis primarily through mitochondrial dysfunction. Mechanistic studies show that Pt@PCN-Cu triggers the dissociation of hexokinase 2 (HK2) from mitochondria, leading to a reduction in HK2 activity. This decline in HK2 activity impairs glycolysis, a metabolic pathway essential for tumor energy metabolism, which in turn results in elevated PD-L1 levels. In vivo, Pt@PCN-Cu demonstrates excellent safety and accumulates at the tumor site in a subcutaneous PDAC mouse model, inducing cuproptosis. Moreover, the combination of Pt@PCN-Cu with αPD-L1 further enhanced its therapeutic efficacy and effectively reprogrammed the immunosuppressive TME. Conclusion This study presents strong evidence confirming the safety and therapeutic potential of Pt@PCN-Cu in PDAC treatment. Importantly, Pt@PCN-Cu not only induces cuproptosis but also significantly enhances antitumor efficacy in combination with αPD-L1 by regulating PD-L1 expression through HK2 modulation. These findings underscore a more effective and innovative approach for treating PDAC.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials
·
2019
·Vol. 12
·期 4
·670
·
IF 2.972
Xiangyang Chen,Rui Bao,Jianhong Yi,Dong Fang,Jingmei Tao,Yichun Liu
Carbon nanotube (CNT)-reinforced metal matrix composites (MMCs) face the problems of dispersion and interfacial wetting with regard to the matrix. A synergetic method of spray pyrolysis (SP) and flake powder metallurgy (FPM) is used in this paper to improve the dispersibility and interfacial bonding of CNTs in a Cu matrix. The results of the interface characterization show interface oxygen atoms (in the form of Cu2O) and a high density of dislocation areas, which is beneficial for interfacial bonding. The tensile results show that the tensile strength of the SP-CNT-Cu composites is much higher than that of the CNT-Cu composites when the mass fraction of the CNTs does not reach the critical value. This can be explained by the nanoparticles which are found on the surface of the CNTs during the SP process. These nanoparticles not only increase the tensile strength of the SP-CNT-Cu composites but also improve the dispersion of the CNTs in the Cu matrix. Thereby, uniform dispersion of CNTs, interfacial bonding between CNTs and the Cu matrix, and the enhancement of tensile strength are achieved simultaneously by the synergetic method.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 40
·31637-31647
·
IF 3.84
Guilong Liu,Dongming Pan,Ting Niu,Ang Cao,Yizhi Yue,Yuan Liu
LaFeO3 supported Cu–Co bimetallic catalysts with high surface area and mesoporosity were prepared by impregnation combined with nanocasting method, and the resulting catalysts were used for higher alcohol synthesis (HAS) from syngas. These catalysts were characterized by using N2 adsorption and desorption, X-ray diffraction, temperature programmed reduction, transmission electron microscopy and energy dispersive spectrometry techniques. The results showed that the catalysts were highly active and selective to higher alcohols, and meanwhile stable for HAS. Characterization results indicated that Cu–Co was in the state of a solid solution alloy in the reduced catalysts, and the formation of Cu–Co alloy led to the high selectivity to higher alcohols. The elements in the catalysts were uniformly mixed and in interaction, thus sintering of the nanoparticles in the catalysts was restricted, resulting in a good stability. The high activity was mainly attributed to the high surface area and mesoporosity. Compared with Cu–Co/LaFeO3 prepared by conventional methods, Cu–Co/LaFeO3 with higher surface area and mesoporosity exhibited better activity and higher selectivity to higher alcohols. This design scheme may be applied to other bimetallic catalysts, and many transition metal ions can act as the lattice ions of perovskite-type oxides besides copper and cobalt.
✓ 已验证
DOI
高影响因子