MACROMOLECULAR RESEARCH
·
2018
·Vol. 26
·期 5
·403-409
·
IF 1.767
Wang Xiaoping,Du Jianghua,Zhang Xin,Jia Deming
A mechano-chemical modification process for waste rubber powder (WRP) was investigated in this paper. 2-Mercatobenzothiozole (accelerator M) was introduced as a peptizer to improve plasticity of WRP, and 3-aminopropyltriethoxysilane (silane coupling agent KH550) was used as a surfactant to further modify the surface of plasticized rubber powder (PRP) to improve interfacial bonding with epoxidized natural rubber (ENR). Infrared spectrums showed that the WRP generated more oxygen-containing groups by mechanical forces in the presence of accelerator M and then grafted amino groups with KH550. The mechano-chemical process with accelerator M changed the structure of WRP obviously shown by sol fraction and microstructure of PRP, which increased the mechanical properties and crosslink density of full rubber powder vulcanizates. After further modified by KH550, the modified rubber powder (MRP) had a positive chemical interfacial bonding with ENR, changing the fracture surface and improving the mechanical properties of vulcanizates. The cure characteristics of the vulcanizates also illustrated that accelerator M and KH550 participated in the vulcanization process increasing the curing efficiency. The best mechanical properties of ENR/MRP vulcanizates were better than the neat ENR vulcanizates. It indicated that the mechano-chemical process with accelerator M and KH550 will be a potential method to reclaim WRP.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2018
·Vol. 29
·期 22
·19200-19206
·
IF 2.324
Zheng Guanghong,Jianhua Ren,Guo Ronghui
Kevlar fabric was pretreated with aminopropyltrimethoxysilane (APTMS) through supercritical carbon dioxide (scCO 2 ) process before electroless nickel plating. APTMS pretreated Kevlar fibers were characterized by element distribution and contact angle. Deposition rate, deposit weight, surface morphology, crystal structure, surface resistance, electromagnetic interference shielding effectiveness (SE) and magnetic properties of electroless nickel plated Kevlar fabric were investigated. The results show that APTMS is evenly covered on Kevlar fibers after pretreatment. Nickel coatings on the Kevlar fibers are dense and uniform after nickel plating. Surface resistance and electromagnetic interference SE of the nickel plated Kevlar fabric via scCO 2 processes arrives at 1.33 Ω/sq and 13–19 dB at frequencies ranging from 2 to 18 GHz. The saturation magnetization of Ni coated Kevlar fabric reaches 207.52 memu/g.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2018
·Vol. 29
·期 20
·17571-17579
·
IF 2.324
Zhong Canyu,Lai Qi,Liao Xianjie,Li Yufeng,Wu Jinggao
Porous Ti-doped MoO 2 was successfully synthesized through one-pot hydrothermal method and used as an anode material for lithium ion batteries (LIBs). It delivers an initial discharge capacity of 1290 and 410 mAh/g at current density of 20 and 1000 mA/g, respectively. Electrochemical cycle test shows that the discharge capacity of 740 mAh/g can be obtained after 80 cycles at current density of 200 mA/g, with 78.06% capacity retention and almost 100% columbic efficiency. The electrochemical performances are much better than that of other MoO 2 -based materials. This could be assigned to the porous structure that increased contact areas between electrode materials and electrolytes, much faster electron transport confirmed via electrochemical impedance spectroscopy (EIS) analysis and Density functional theory (DFT) calculations.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2018
·Vol. 54
·期 1
·286-301
·
IF 2.993
Fang Hongbiao,Cao Xin,Yu Jiajie,Lv Xiang,Yang Nan,Wang Tianhe,Jiang Wei
Tungsten oxide (WO 3 ) is a well-known photocatalyst, but its application is restricted due to its low conduction band and reduction power. In addition, WO 3 catalyst in powder forms has little application prospect because of difficulties in separation and regeneration. In this work, we prepared WO 3 /Ag/AgCl films on conventional glass that not only have much enhanced photocatalytic capability but also can be readily regenerated. The WO 3 film was prepared on glass substrate by calcination of spin-coated W precursor. Ag/AgCl particles were then deposited on WO 3 film by an impregnating–precipitation–photoreduction method. The photocatalytic efficiency of WO 3 /Ag/AgCl was evaluated by using methyl orange (MO) and Rhodamine B (RhB) as target pollutants. The highest photocatalytic performance was achieved with the 3-WO 3 /Ag/AgCl film, being 18 and 13 times higher than that of pure WO 3 film for degradation of MO and RhB, respectively. The degradation rate for both MO and RhB by 3-WO 3 /Ag/AgCl film catalyst decreased by less than 5% after five cycled tests. The photodegradation mechanism was discussed based on the electrochemical impedance spectroscopy Nyquist tests, photoelectrochemical analysis and reactive oxygen species scavenging experiments. A possible all-solid-state Z-scheme mechanism is proposed based on the photoelectron chemical tests and radical trapping experiments. This study provides a feasible technique to prepare a photocatalytic film with practicability and reproducibility.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2018
·Vol. 53
·期 22
·15390-15400
·
IF 2.993
Guo Danyi,Chen Jiahui,Wen Lanfang,Wang Peng,Xu Shouping,Cheng Jiang,Wen Xiufang,Wang Shuangfeng,Huang Chaoyun,Pi Pihui
A superhydrophobic film with good durability was fabricated by simple spraying a mixed solution of a POSS-based fluorinated acrylate polymer and ethyl-α-cyanoacrylate on a glass slide. The polymer was firstly synthesized via a typical free radical solution polymerization and could self-assemble into spherical micelle, thus leading to the formation of a rough film with hierarchical nano-microstructure through spray coating. The adding of ethyl-α-cyanoacrylate can improve the mechanical durability of the film. The film shows robust superhydrophobicity with a high water angle contact of 158° and an ultralow water sliding angle of 1.9°. More importantly, the film not only can withstand 25 abrasion cycles under a load of 200 g and approximately 5.5 m high static water pressure without losing superhydrophobicity, but also exhibits favorable resistance to acidic and basic solutions over a wide range of pH values from 2 to 14. Besides, the transmittance of the coated glass slide is above 75% in the visible light range of 400–800 nm, reflecting high transparency of the film. This film may be a promising candidate in practical applications, including coating of optical devices, solar cell panel and outdoor instruments, because this method to fabricate supehydrophobic surfaces is facile, effective and scalable, and the superhydrophobic coating has good water resistance, high transparency and enough durability.
✓ 已验证
产品关联
DOI
高影响因子
FIBERS AND POLYMERS
·
2018
·Vol. 19
·期 5
·1004-1013
·
IF 1.353
Xu Qingbo,Ke Xiating,Ge Naiqin,Shen Liwen,Zhang Yanyan,Fu Feiya,Liu Xiangdong
When copper nanoparticles (Cu NPs) were applied as an antimicrobial agent to finish cotton fabrics, there are two issues should be solved: the oxidization and the weak adsorbability onto cotton fiber surface. In the present work, we developed a new method that can achieve both immobilization and protection of the Cu NPs at the same time. As an effective binder, thioglycolic acid (TGA) was covalently linked to cotton fiber surface via an esterification with the hydroxyl groups of cellulose, then Cu NPs were introduced on the fabric surface in the presence of a protective reagent, citric acid. Due to the doubled stabilization acts of TGA and citric acid, the Cu NPs immobilized on the fabric surface showed an excellent antibacterial effect and outstanding laundering durability. Even after 50 consecutive laundering tests, the modified cotton fabrics still showed satisfactory antibacterial ability against both S. aureus and E. coli , which the bacterial reduction rates are all higher than 96 %. It is believed that this methodology has potential applications in a wide variety of textile productions such as sportswear, socks, and medical textiles.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2018
·Vol. 20
·期 6
·1-13
·
IF 2.127
Cheng Yuan,Sun Kangning
YVO 4 :Yb 3+ ,Er 3+ ; YVO 4 :Yb 3+ ,Tm 3+ ; and YVO 4 :Yb 3+ ,Er 3+ ,Tm 3+ were all synthesized via sol-gel method with a subsequent thermal treatment. Specifically, YVO 4 :Yb 3+ ,Er 3+ ,Tm 3+ phosphors were prepared with different annealing temperatures to study the influence of temperature. The transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffractometer (XRD), and photoluminescent (PL) spectrofluorometer were used to investigate the morphology, crystal structure, and up-conversion luminescent properties of all samples. In summary, all samples were granular-like nanoparticles and well crystallized with the same tetragonal phase as YVO 4 . Under the irradiation at 980 nm, YVO 4 :Yb 3+ ,Er 3+ phosphors can generate green emission at 525 and 553 nm and red emission at 657 nm, while YVO 4 :Yb 3+ ,Tm 3+ phosphors can generate blue emission at 476 nm, red emission at 648 nm, and near-infrared emission at 800 nm. Notably, YVO 4 :Yb 3+ ,Er 3+ ,Tm 3+ samples can exhibit green emission, blue emission, red emission, and near-infrared emission at the same time, which might endow the as-prepared samples with potential applications in many fields, such as luminous paint, infrared detection, and biological label.
✓ 已验证
产品关联
DOI
高影响因子
Acta Metallurgica Sinica-English Letters
·
2018
·Vol. 31
·期 9
·910-922
·
IF 1.341
Liang Su-Zhe,Wang Xiao-Yan,Xia Yong-Gao,Xia Sen-Lin,Metwalli Ezzeldin,Qiu Bao,Ji Qing,Yin Shan-Shan,Xie Shuang,Fang Kai,Zheng Lu-Yao,Wang Mei-Mei,Zuo Xiu-Xia,Li Ru-Jiang,Liu Zhao-Ping,Zhu Jin,Müller-Buschbaum Peter,Cheng Ya-Jun
Abstract A facile scalable synthesis of hierarchical Sb/C micro-/nanohybrid has been addressed in this work, which possesses the advantages of both micrometer and nanometer scale structures as lithium-ion battery anode. Difunctional methacrylate monomers are used as solvent and carbon source as well. Liquid precursor of antimony(III) n -butoxide is dissolved in the resin monomer solution, and further incorporated into the cross-linking polymer network via photo polymerization. Through calcination in argon/hydrogen atmosphere, antimony nanoparticles are in situ formed by carbothermal reduction, and homogeneously embedded in the in situ formed micrometer sized carbon matrix. The morphology, structure, crystallinity, spatial dispersion, composition, and electrochemical performance of the Sb/C micro-/nanohybrid are systematically investigated. The cyclic and rate performance of the Sb/C micro-/nanohybrid anode have been effectively improved compared to the pure carbon anode. A reversible capacity of 362 mAh g −1 is achieved with a reasonable mass loading density after 300 cycles at 66 mA g −1 , corresponding to capacity retention of 79%. With reducing mass loading density, the reversible capacity reaches 793 mAh g −1 after 100 cycles. Moreover, the electrochemical performance of Sb/C micro-/nanohybrid as sodium-ion battery anode is also investigated in this study. Graphical Abstract Sb/C hierarchical micro-/nanohybrid lithium-ion battery anode with good cyclic stability is synthesized in a scalable way using difunctional methacrylate monomers as solvent and carbon source, where a reversible capacity of 362 mAh g −1 is achieved after 300 cycles with a reasonable mass loading density, corresponding to capacity retention of 79%
✓ 已验证
产品关联
DOI
高影响因子
TRANSACTIONS OF TIANJIN UNIVERSITY
·
2018
·Vol. 25
·期 2
·101-109
·
IF 0
Yuan Caideng,Zhang Lei,Li Haichao,Guo Ruiwei,Zhao Meng,Yang Lan
In this study, we prepared and applied polymeric porous microsphere adsorbents with selectivity for Li + extraction from aqueous solution. We synthesized the adsorbents by suspension polymerization using methacryloyoxyme-12-crown-4 (M12C4) as a functional monomer, which had been synthesized from 2-hyroxymethyl-12-crown-4 and methacryloyl chloride. We verified the chemical composition by solid nuclear magnetic resonance ( 13 C-NMR) spectroscopy and observed the porous structure by scanning electron microscopy (SEM). We conducted adsorption isothermal and kinetic tests to determine the adsorption properties. It was found that the adsorbents showed high adsorption efficiency and an adsorption equilibrium time of 200 min. In addition, since the crown ether used in this work could form a stable complex with Li + , we observed good selectivity for Li + in the prepared solution compared with other ions such as Na + , K + , Mg 2+ , and Ca 2+ . We reused the adsorbents five times with no significant decrease in adsorptive capacity.
✓ 已验证
产品关联
DOI
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2018
·Vol. 25
·期 17
·17128-17136
·
IF 2.8
Tan Lin-Rui,Xia Peng-Fei,Zeng Raymond J.,Li Qian,Sun Xue-Fei,Wang Shu-Guang
The interactions between antibiotics and microorganisms have attracted enormous research attentions. In this study, we investigated the effects of two typical aminoglycoside antibiotics on the aggregation of the model cyanobacterium, Synechococcus elongatus , and the dominating strain in algal blooms, Microcystis aeruginosa , via the analysis of zeta potentials, hydrophobicity, and extracellular polymeric substances (EPS) secretion . The results showed that low-level antibiotics promoted the aggregation of S. elongatus and M. aeruginosa by 40 and 18% under 0.10 and 0.02 μg/mL of kanamycin, respectively, which was mainly attributed to the combined effects of increased zeta potentials and the ratio between extracellular proteins and polysaccharides. Tobramycin exerted similar effects. Additionally, we discovered that at low pH (pH 5) and ionic strength (1 mM Na + and 2 mM Mg 2+ ), the inducing effects of antibiotics would be even larger than those with higher pH and ionic strength. As aggregation is important to cyanobacteria in either the basic physiology of biofilm formation or the algal bloom, our study demonstrated that low-level antibiotics exert ecological impacts via interfered aggregation. We believe this study will shed light on the mechanisms underlying antibiotic-induced biofilm formation and help with the evaluation of the environmental and ecological risks of antibiotics and other emerging pollutants.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CATALYSIS LETTERS
·
2018
·Vol. 148
·期 7
·1990-2000
·
IF 2.911
Zhang Kai,Zhang Yunhai,Zhang WanJu
Abstract A kind of 2D/2D heterojunction photocatalysts was constructed by a facile in situ hydrothermal method that a tetragonal CuInS 2 nanosheets was horizontal loaded in ultrathin hexagonal SnS 2 nanosheets. Contrasted to pure CuInS 2 and SnS 2 nanosheets, the CuInS 2 /SnS 2 nano-heterojunctions revealed a noteworthy improvement photocatalytic activity under visible light irradiation for the degradation of organic dyes, which should be attributed to the narrowest band gap and the efficient charge separation and transfer improving the contact region in heterojunction interface. Especially, with 0.5 wt% addition of CuInS 2 , the heterojunction nanosheets shows a supreme visible-light photocatalytic activity and a superb degradation efficiency which reached 99% in 60 min with the solution of methyl orange. Moreover, CuInS 2 /SnS 2 nano-heterojunctions deliver excellent reusability in five degradation–regeneration cycles. The results indicated that CuInS 2 /SnS 2 has a promising prospect in organic pollutant treatment due to high efficiency and excellent stability. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
Journal of Bionic Engineering
·
2018
·Vol. 15
·期 3
·461-470
·
IF 2.325
Xiong Xiong,Liu Yumei,Shi Feng,Zhang Guowei,Weng Jie,Qu Shuxin
The aim of this study is to investigate the effect of the contents of modified 3, 4-dihydroxyphenyl-L-alanine (DOPA), named as dopamine methacrylamide (DMA), on the adhesion of mussel-inspired adhesives in air and water. A series of adhesives, p(DMA-co-MEA), were synthesized by copolymerized DMA and methoxy ethylacrylate (MEA) with the content of DMA from 2 mol.% to 10 mol.%. Results of 1 H NMR show that the contents of DMA in all adhesives are near to the theory ratios of DMA in the staring reagents. Adhesives with more than 5 mol.% of DMA appear adhesion, while adhesives with 2 mol. % and 3 mol. % of DMA show almost no adhesion in air and water. Adhesive with 7 mol.% of DMA has the highest molecular weight and adhesion either in air or in water in all adhesives. Adhesion of adhesive is synergistically influenced by the content of DMA, molecular weight and elastic modulus of adhesive. It is because that higher content of DMA would provide more DOPA, which leads to the coordination bond between DOPA and metal ions. It is feasible to develop the mussel-inspired adhesive through incorporating DMA into polymers, which will have potential application in the clinic.
✓ 已验证
产品关联
DOI
高影响因子