Advanced Composites and Hybrid Materials
·
2023
·Vol. 6
·期 3
·1-11
·
IF 20.1
Wang Zhengfang,Wu Zijian,AlMasoud Najla,Weng Ling,Alomar Taghrid S.,El-Bahy Zeinhom M.,He Mingpeng,Yang Changjie,Sun Mingqi,Wasnik Priyanka,Li Handong,Algadi Hassan,Annamareddy Sri Hari Kumar,Sridhar Deepak
Enhancing the thermal conductivity ( λ ) of composites by establishing an effective thermally conductive path is the key to prepare thermally conductive composites. In this study, a new preparation method was used to achieve high λ of composites with low filler contents. Firstly, multi-walled carbon nanotubes (MWCNT) and alumina (Al 2 O 3 ) established a synergistic thermal conductivity network in the polystyrene particles, and subsequently, the hexagonal boron nitride (h-BN) filler wrapped in the outer layer of the composite particles constructed a continuous h-BN thermal conductivity network during the hot-pressing process. The three-dimensional thermal conductivity network supported by the two thermal conductivity networks provided more pathways for heat transfer in the composite, thus significantly improving its λ . The λ of the composites increased to 3.36 W/mK for MWCNT content of 0.5 wt%, Al 2 O 3 content of 0.5 wt%, and h-BN content of 30 wt%. The composite also has good insulating properties, with a conductivity value of only 3.21 × 10 −9 S/cm at an h-BN content of 30 wt% and MWCNT content of 0.5 wt%. This results from the presence of a h-BN insulation layer on the outside of the composite sphere and the presence of Al 2 O 3 in the synergistic network that blocks the electron transport inside the material, thus maintaining its good insulating properties. Therefore, the composite prepared in this paper has the potential to be used in the field of electronic packaging.
✓ 已验证
DOI
高影响因子
Nature Aging
·
2025
·
IF 19.4
Liu Liu,Wang Qianyue,Chen Meng,Zhou Haifeng,Li Xu,Yuan Ziqi,Hu Yong,Wang Chaoqun,Zhang Xiaohui,Hu Sheng,Wu Xiaoting,Li Meixin,Li Juanjuan,Chen Aijun,Yan Wei
Lung aging is a multifactorial series of molecular alterations that leads to gradual deterioration of lung function and increased vulnerability to cancer. Tumor communicates with host organs partially through extracellular vesicles; however, the mechanistic drivers and consequences of lung aging in the context of cancer remain unclear. Here we identify cancer cell-secreted dimethylarginine dimethylaminohydrolase-1 (DDAH1) protein induces citrulline accumulation and promotes lung fibrosis and aging. Mechanistically, our single-cell sequencing and genetic knockout mice evidence that citrulline availability elevation inhibits peptidyl arginine deiminase 4-mediated transforming growth factor-β1 (TGF-β1) citrullination, thereby inducing the TGF-β1/Smad3 signaling pathway in lung fibroblasts. Notably, vacuolar protein sorting assists the packaging of DDAH1 into the late endosomes. The administration of DDAH1 inhibitor reduces fibrosis and alleviates lung aging. Conclusively, our findings reveal tumor-derived DDAH1 protein contributes to citrulline accumulation to promote lung aging, shedding light on the treatment and diagnosis of tumors by inhibiting senescent lung fibroblasts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Light-Science & Applications
·
2023
·Vol. 12
·期 1
·1-10
·
IF 19.4
Gong Chaoyang,Yang Xi,Tang Shui-Jing,Zhang Qian-Qian,Wang Yanqiong,Liu Yi-Ling,Chen Yu-Cheng,Peng Gang-Ding,Fan Xudong,Xiao Yun-Feng,Rao Yun-Jiang,Gong Yuan
Biomarker detection is key to identifying health risks. However, designing sensitive and single-use biosensors for early diagnosis remains a major challenge. Here, we report submonolayer lasers on optical fibers as ultrasensitive and disposable biosensors. Telecom optical fibers serve as distributed optical microcavities with high Q-factor, great repeatability, and ultralow cost, which enables whispering-gallery laser emission to detect biomarkers. It is found that the sensing performance strongly depends on the number of gain molecules. The submonolayer lasers obtained a six-order-of-magnitude improvement in the lower limit of detection (LOD) when compared to saturated monolayer lasers. We further achieve an ultrasensitive immunoassay for a Parkinson’s disease biomarker, alpha-synuclein (α-syn), with a lower LOD of 0.32 pM in serum, which is three orders of magnitude lower than the α-syn concentration in the serum of Parkinson’s disease patients. Our demonstration of submonolayer biolaser offers great potentials in high-throughput clinical diagnosis with ultimate sensitivity.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2022
·Vol. 13
·期 1
·1-13
·
IF 17.694
Zeng Dewu,Yao Jingming,Zhang Long,Xu Ruonan,Wang Shaojie,Yan Xinlin,Yu Chuang,Wang Lin
The use of inorganic solid-state electrolytes is considered a viable strategy for developing high-energy Li-based metal batteries. However, suppression of parasitic interfacial reactions and growth of unfavorable Li metal depositions upon cycling are challenging aspects and not yet fully addressed. Here, to better understand these phenomena, we investigate various sulfide inorganic solid electrolytes (SEs), i.e., Li 7− x PS 6− x Cl x ( x = 0.6, 1.0, 1.3, 1.45, and 1.6), via ex situ and in situ physicochemical and electrochemical measurements. We found that the Cl distribution and the cooling process applied during the SE synthesis strongly influence the evolution of the Li|SE interface in terms of microstructure, interphase composition, and morphology. Indeed, for a SE with a moderate chlorine content (i.e., x = 1.3) and obtained via a slow cooling process after sintering, the Cl atoms are located on the surface of the SE grains as interconnected LiCl nanoparticles that form an extended LiCl-based framework. This peculiar microstructure facilitates the migration of the Cl ions to the Li|SE interface during electrochemical cycling, thus, favouring the formation of a LiCl-rich interphase layer capable of improving the battery cycling performances.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2022
·Vol. 13
·期 1
·1-10
·
IF 17.694
Lai Qi,Pei Le,Fei Teng,Yin Ping,Pang Siping,Shreeve Jean’ne M.
Size matching molecular design utilizing host-guest chemistry is a general, promising strategy for seeking new functional materials. With the growing trend of multidisciplinary investigations, taming the metastable high-energy guest moiety in well-matched frameworks is a new pathway leading to innovative energetic materials. Presented is a selective encapsulation in hydrogen-bonded hydroxylammonium frameworks (HHF) by screening different sized nitrogen-rich azoles. The size-match between a sensitive high-energy guest and an HHF not only gives rise to higher energetic performance by dense packing, but also reinforces the layer-by-layer structure which can stabilize the resulting materials towards external mechanic stimuli. Preliminary assessment based on calculated detonation properties and mechanical sensitivity indicates that HHF competed well with the energetic performance and molecular stability (detonation velocity = 9286 m s −1 , impact sensitivity = 50 J). This work highlights the size-matched phenomenon of HHF and may serve as an alternative strategy for exploring next generation advanced energetic materials.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2022
·Vol. 13
·期 1
·1-9
·
IF 17.694
Zhao Ruirui,Wang Haifeng,Du Haoran,Yang Ying,Gao Zhonghui,Qie Long,Huang Yunhui
Aqueous zinc batteries are appealing devices for cost-effective and environmentally sustainable energy storage. However, the zinc metal deposition at the anode strongly influences the battery cycle life and performance. To circumvent this issue, here we propose the use of lanthanum nitrate (La(NO 3 ) 3 ) as supporting salt for aqueous zinc sulfate (ZnSO 4 ) electrolyte solutions. Via physicochemical and electrochemical characterizations, we demonstrate that this peculiar electrolyte formulation weakens the electric double layer repulsive force, thus, favouring dense metallic zinc deposits and regulating the charge distribution at the zinc metal|electrolyte interface. When tested in Zn||VS 2 full coin cell configuration (with cathode mass loading of 16 mg cm −2 ), the electrolyte solution containing the lanthanum ions enables almost 1000 cycles at 1 A g −1 (after 5 activation cycles at 0.05 A g −1 ) with a stable discharge capacity of about 90 mAh g −1 and an average cell discharge voltage of ∼ 0.54 V.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2022
·Vol. 13
·期 1
·1-9
·
IF 17.694
Wang Xiaoyao,Shi Benbing,Yang Hao,Guan Jingyuan,Liang Xu,Fan Chunyang,You Xinda,Wang Yanan,Zhang Zhe,Wu Hong,Cheng Tao,Zhang Runnan,Jiang Zhongyi
Ionic covalent organic framework membranes (iCOFMs) hold great promise in ion conduction-relevant applications because the high content and monodispersed ionic groups could afford superior ion conduction. The key to push the upper limit of ion conductivity is to maximize the ion exchange capacity (IEC). Here, we explore iCOFMs with a superhigh ion exchange capacity of 4.6 mmol g −1 , using a dual-activation interfacial polymerization strategy. Fukui function is employed as a descriptor of monomer reactivity. We use Brønsted acid to activate aldehyde monomers in organic phase and Brønsted base to activate ionic amine monomers in water phase. After the dual-activation, the reaction between aldehyde monomer and amine monomer at the water-organic interface is significantly accelerated, leading to iCOFMs with high crystallinity. The resultant iCOFMs display a prominent proton conductivity up to 0.66 S cm −1 , holding great promise in ion transport and ionic separation applications.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2022
·Vol. 13
·期 1
·1-9
·
IF 17.694
Sun Hui,Chen Shuai,Li Xiao,Leng Ying,Zhou Xiaoyan,Du Jianzhong
The precise control of the shape, size and microstructure of nanomaterials is of high interest in chemistry and material sciences. However, living lateral growth of cylinders is still very challenging. Herein, we propose a crystallization-driven fusion-induced particle assembly (CD-FIPA) strategy to prepare cylinders with growing diameters by the controlled fusion of spherical micelles self-assembled from an amphiphilic homopolymer. The spherical micelles are heated upon glass transition temperature ( T g ) to break the metastable state to induce the aggregation and fusion of the amorphous micelles to form crystalline cylinders. With the addition of extra spherical micelles, these micelles can attach onto and fuse with the cylinders, showing the living character of the lateral growth of cylinders. Computer simulations and mathematical calculations are preformed to reveal the total energy changes of the nanostructures during the self-assembly and CD-FIPA process. Overall, we demonstrated a CD-FIPA concept for preparing cylinders with growing diameters.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2022
·Vol. 13
·期 1
·1-21
·
IF 17.694
Cao Yuanxiong,Tan Jiayi,Zhao Haoran,Deng Ting,Hu Yunxia,Zeng Junhong,Li Jiawei,Cheng Yifan,Tang Jiyuan,Hu Zhiwei,Hu Keer,Xu Bing,Wang Zitian,Wu Yaojiong,Lobie Peter E.,Ma Shaohua
Transplantation of mesenchymal stem cells (MSCs) holds promise to repair severe traumatic injuries. However, current transplantation practices limit the potential of this technique, either by losing the viable MSCs or reducing the performance of resident MSCs. Herein, we design a “bead-jet” printer, specialized for high-throughput intra-operative formulation and printing of MSCs-laden Matrigel beads. We show that high-density encapsulation of MSCs in Matrigel beads is able to augment MSC function, increasing MSC proliferation, migration, and extracellular vesicle production, compared with low-density bead or high-density bulk encapsulation of the equivalent number of MSCs. We find that the high-density MSCs-laden beads in sparse patterns demonstrate significantly improved therapeutic performance, by regenerating skeletal muscles approaching native-like cell density with reduced fibrosis, and regenerating skin with hair follicle growth and increased dermis thickness. MSC proliferation within 1-week post-transplantation and differentiation at 3 − 4 weeks post-transplantation are suggested to contribute therapy augmentation. We expect this “bead-jet” printing system to strengthen the potential of MSC transplantation.
✓ 已验证
DOI
PubMed
高影响因子
Advanced Fiber Materials
·
2024
·Vol. 6
·期 3
·739-757
·
IF 17.2
Han He,Lou Zhichao,Wang Qiuyi,Xu Lei,Li Yanjun
With the rapid development of 5G communication and artificial intelligence (AI) technology, electromagnetic radiation pollution is emerging as a serious issue. Achieving both uniform dispersion and controllable loading of absorbers and obtaining functional wearable absorbers with high electromagnetic response are still considered great challenges. In this work, a flexible fiber-based absorber (VF T2h /MF/PPy) with a rich interfacial polarization relaxation was obtained by integrating heterostructures and performing nanostructure design and introducing π-conjugated polymer components. Electrons migrated and redistributed between nanoparticles and nitrogen-carbon lattices with different electrostatic states. The formed heterogeneous interface promoted the electromagnetic attenuation response in the high-frequency region. More specifically, the effective absorption frequency bandwidth was up to 5.6 GHz (corresponds to the Ku-band with a matching thickness range up to 2.55–4.85 mm). Impressively, the abundant modification sites on the fiber surface adjusted the content and dispersion of the magnetic nanoparticles and enhanced the vector superposition effect generated by the structural distribution of the magnetic/electric fields. The introduction of dielectric components improved the interfacial polarization strength of the heterojunction surface and the synergistic effect of the dipolar polarization. The high-efficiency electromagnetic attenuation performance was attributed to multiple loss mechanisms. Our work provides a reference path for the microscopic regulation of the high-efficiency electromagnetic response mechanism of fiber-based flexible absorbing materials. Graphical Abstract
✓ 已验证
DOI
高影响因子
Advanced Fiber Materials
·
2024
·Vol. 6
·期 3
·727-738
·
IF 17.2
Wang Manxi,Lv Shiwen,Li Manxian,Li Xuan,Li Chuanping,Li Zulin,Chen Xiaochuan,Wu Junxiong,Li Xiaoyan,Chen Yuming,Chen Qinghua
Quasi-solid-state electrolytes that possess high ionic conductivity, excellent interface stability, and low interfacial resistance, are required for practical solid-state batteries. Herein, a heterogeneous quasi-solid-state hybrid electrolyte (QSHE) with a robust lithium-ion transport layer composed of Li 1+ x Al x Ti 2− x (PO 4 ) 3 (LATP) nanoparticles (NPs) at the anode/electrolyte interface was fabricated using electrospun nanofibers as a skeleton via a facile in situ polymerization approach. The QSHE exhibits a high ionic conductivity (0.98 mS cm −1 ), a wide electrochemical window (4.76 V vs. Li/Li + ), and favorable compatibility with lithium metal (maintaining stability over 2000 h in a symmetrical cell) at room temperature. When coupled with a Li|LiFePO 4 battery, the QSHE enables the battery to retain 95.4% of its capacity after 300 cycles at 2 C. Moreover, the atomic force microscopy verifies the high Young’s modulus of the LATP-dominated bottom layer, while numerical simulation validates the effective distribution of lithium ions at the interface facilitated by LATP NPs, hence contributing to dendrite-free lithium plating/stripping morphology. This straightforward strategy could pave the way for the development of high-performance and interfacially stable lithium metal batteries. Graphical Abstract
✓ 已验证
DOI
高影响因子
Nature Protocols
·
2022
·Vol. 17
·期 9
·1980-2007
·
IF 17.021
Liu Yusheng,Zhang Yiwei,Wang Jiaqiang,Lu Falong
Poly(A) tails are added to the 3′ ends of most mRNAs in a non-templated manner and play essential roles in post-transcriptional regulation, including mRNA export, stability and translation. Measuring poly(A) tails is critical for understanding their regulatory roles in almost every aspect of biological and medical studies. Previous methods for analyzing poly(A) tails require large amounts of input RNA (microgram-level total RNA), which limits their application. We recently developed a poly(A) inclusive full-length RNA isoform-sequencing method (PAIso-seq) at single-oocyte-level sensitivity (a single mammalian oocyte contains ~0.5 ng of total RNA) based on PacBio sequencing that enabled accurate measurement of the poly(A) tail length and non-A residues within the body of poly(A) tails along with the full-length cDNA, providing the opportunity to study precious in vivo samples with very limited input material. Here, we describe a detailed protocol for PAIso-seq library preparation from single mouse oocytes or bulk oocyte samples. In addition, we provide a complete bioinformatic pipeline to perform the analysis from the raw data to downstream analysis. The minimum time required is ~14.5 h for PAIso-seq double-stranded cDNA preparation, 2 d for PacBio sequencing in HiFi mode and 8 h for the initial data analysis.
✓ 已验证
DOI
PubMed
高影响因子