Small
·
2026
·
IF 11.8
Meiling Pan,Wenxin Song,Yiqun Shao,Shuai Wang,Xin Yue,Shaoming Huang
The development of efficient and durable platinum group metal (PGM)-free electrocatalysts for the alkaline hydrogen oxidation reaction (HOR) is critical but remains challenging due to unfavorable hydrogen binding energy (HBE) and hydroxyl binding energy (OHBE) of nickel-based electrocatalysts. Nickel-based catalysts also experience rapid degradation under operating conditions. Herein, we report a surface reconstruction strategy to simultaneously tailor the HBE and OHBE of Cu-Ni core–shell electrocatalysts via nitric acid etching. This process removes the Ni-rich surface layer and induces oxygen intercalation into the top ∼10 atomic layers, accompanied by Cu redistribution near the surface. The resulting oxygen-intercalated surface protects Ni from anodic oxidation, while Cu incorporation stabilizes the bimetallic structure, addressing the stability challenge. The as-prepared electrocatalyst (Cu@O i -NiCu) exhibits a downshifted Ni d -band center that optimizes HBE, while intercalated oxygen modulates orbital alignment and anti-bonding filling to strengthen OHBE. As a result, Cu@O i -NiCu achieved a current density of 2.33 mA cm −2 at an overpotential of 100 mV, and demonstrated a kinetic current density of 5.26 mA cm −2 . Moreover, it maintained 93.5% activity after 10 000 cycles. This work offers a controllable surface-reconstruction route for modulating hydrogen and hydroxyl binding and provides a generalizable strategy for constructing stable HOR catalysts.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Chenan Xu,Wenbo Liao,Mei Xue,Dongwei Ao,Lan Mu,Gang Zhao,Renxiang He,Yuxin Dai,Baojie Zhang
Developing a cost-effective and high-performance electrocatalyst for efficient water splitting is crucial for the sustainable production of green hydrogen. In this study, a self-supported three-dimensional hierarchical needle-sheet heterostructured bifunctional electrocatalyst NiOOH/NiFeCu x was designed. First, copper (Cu) was doped into nickel‑iron layered double hydroxide (NiFe LDH) using a simple hydrothermal method. The trace amount of Cu doping enhanced the electrical conductivity while effectively preventing transient electrochemical dissolution of the Cu during reactions in alkaline solutions. Then, the nickel oxyhydroxide (NiOOH) nanoneedle array was anchored onto the surface of NiFeCu x , constructing a dogail grass-like needle-sheet biomimetic structure to significantly increase and optimize the accessible active surface area. The results demonstrate that NiOOH/NiFeCu 0.2 delivers outstanding performance in 1 M KOH, exhibiting optimal overpotentials of 224.7 ± 2.1 mV for the oxygen evolution reaction and 137.0 ± 2.0 mV for the hydrogen evolution reaction, alongside stable activity after 40 h of continuous operation. When employed as both the anode and cathode for overall water splitting, it achieves a current density of 10 mA cm −2 at a minimal cell voltage of 1.598 V and maintains stability for over 80 h at 100 mA cm −2 . This study offers a promising strategy for the development of low-cost, high-efficiency electrocatalysts for water splitting.
✓ 已验证
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
·
2026
·Vol. 27
·期 12
·5411
·
IF 5.6
Zhaoping Sang,Bowen Tang,Yunhao Zhuo,Lixin Li,Qi Zhang,Yinan Jin,Huiming Zhang,Gang Zhao
Prolonged use of clear aligners promotes bacterial colonization and biofilm formation, which can compromise orthodontic outcomes. There is a clear clinical demand for approaches that can suppress pathogenic activity while preserving the fundamental functional and material characteristics of the aligners. To address this need, a novel strategy of fabricating metal–organic framework (MOF) coatings on aligners was adopted. Metal–organic frameworks (MOFs) have emerged as promising antibacterial coating materials by combining antimicrobial metal ions with biocompatible organic ligands. Three distinct porphyrin-based MOFs (Ag-, Cu-, and Ce-TCPP) were synthesized and fabricated as coatings on clear aligner surfaces via a coordination-driven self-assembly approach. The coated aligners were comprehensively assessed in vitro to determine their antibacterial performance, anti-inflammatory potential, biocompatibility, and key physical characteristics. Among the three coatings, Ag-TCPP showed the most favorable overall antibacterial and anti-biofilm performance in the present experimental system and facilitated macrophage polarization toward an anti-inflammatory M2-like phenotype. Ag-TCPP exhibited a significant inhibition zone of 6.75 ± 0.25 mm and reduced biofilm biomass by 72.2%. All MOF coatings exhibited excellent biocompatibility, and their application did not compromise the aligners’ mechanical integrity or aesthetic properties (light transmittance). This study reports the successful development of a novel metal–organic framework (MOF)-based coating strategy for clear aligners. Among the formulations investigated, the Ag-TCPP coating exhibited outstanding antibacterial and immunomodulatory performance while maintaining the critical mechanical integrity and aesthetic qualities of the aligner. The findings of this work offer a practical approach to designing multifunctional orthodontic devices that may reduce biofilm-related complications and improve clinical outcomes.
✓ 已验证
DOI
高影响因子
ACS Applied Energy Materials
·
2026
·
IF 5.5
Qiqi Mo,Weiying Xu,Yibiao Zhang,Ye Xiang,Yiju Lv,Zheng Liu,Guo-Cheng Han
Zinc anode corrosion and dendrite growth in aqueous zinc-ion batteries remain critical challenges that significantly hinder practical application and long-term cyclability. Herein, we present an interface engineering strategy mediated by trace amounts of copper salts, enabling the in situ formation of a uniform and dense Cu-Zn alloy layer on the zinc foil surface for effective anode interface optimization. The CuZn5@Zn composite anode not only lowers the nucleation barrier for Zn2+ deposition and promotes uniform zinc plating to effectively suppress dendrite proliferation but also suppresses parasitic reactions at the electrode/electrolyte interface, thereby contributing to enhanced electrode structural integrity. Electrochemical measurements reveal that the CuZn5@Zn symmetric cell exhibits a stable cycling performance for over 400 h at 1 mA·cm−2 and 1 mAh·cm−2. The CuZn5@Zn||Cu half-cell maintains high reversibility over 500 cycles under 5 mA·cm−2 and 1 mAh·cm−2, achieving a Coulombic efficiency of 98.7%. Moreover, the CuZn5@Zn//VO2 full cell retains 80.2% of its initial capacity after 200 cycles, significantly outperforming the bare Zn anode, which retains only 39%. This study offers insights into the regulation of zinc anode interface performance via trace metal salt engineering.
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Kobina Kwansa Hammond,Yiliang Chen,Tongxiao Hong,Wenxu Song,Lijie Xu,Hao Shi,Jiaqiang Zheng,Honghua Ruan
Deep purification of heavy metals from complex aqueous matrices is a critical challenge in water remediation. In this study, a novel hierarchical adsorbent (RS-PSS/PEI-HTO) was developed by self-assembling poly(sodium 4-styrenesulfonate) (PSS), polyethyleneimine (PEI), and hydrated titanium oxide (HTO) onto rice straw. This ternary coating transformed the low-value biomass into a high-performance sequestration platform with enhanced structural integrity. System characterization (SEM-EDS, FTIR, and TGA) confirmed the successful formation of a stable interface with uniformly dispersed HTO nanoparticles mediated by the amine-rich PEI layer. Batch equilibrium studies revealed that the adsorption process followed the Langmuir model with an exceptionally high affinity constant (K L = 31.16 L/mg), enabling the capture of trace Cu(II) to near-zero residual levels. The adsorption mechanism was driven by the synergistic interaction of the ternary components: electrostatic pre-enrichment by PSS, high-density amine chelation by PEI, and specific metal–oxygen coordination by HTO. The composite maintained high selectivity for Cu(II) despite a 20-fold molar excess of Ca 2+ and Mg 2+ . Fixed-bed column studies validated its efficacy, reaching a breakthrough point of 225 Bed Volumes (BV) while keeping effluent Cu(II) below 0.1 mg/L, a five-fold improvement over binary RS-HTO. The exhausted adsorbent was easily regenerated with HCl-NaCl, demonstrating excellent stability and reusability. This research provides a sustainable "waste-to-wealth" paradigm for engineering high-affinity materials tailored for the deep purification of heavy-metal-contaminated wastewater. Download: Download high-res image (249KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·124716
·
IF 7.5
Rui Yang,Chaoting Jiang,Wangbo Wang,Xianshu Zhou,Fangshu Xie,Mingming Ta,Tuo Wang,Haifang Cai,Juan Guo,Weihuang Zhu
Fabricating a high-performance catalyst for peroxymonosulfate (PMS) activation via efficient nonradical pathways remains a crucial challenge. Herein, we developed a new strategy to fabricate an efficient PMS activator (FeCu@NBC 700 ) with synergistic Fe-Cu dual sites encapsulated in nitrogen (N) self-doped biochar derived from waste soybean dregs. The FeCu@NBC 700 catalyst achieved 98.55% tetracycline (TC) removal and 90.56% PMS utilization within 60 min, with excellent stability across varying pH conditions, realistic water matrices, and continuous-flow operation. Characterizations confirmed that the N-rich carbon matrix (NBC 700 ) facilitated the in-situ formations, enhanced stabilizations, and full dispersions of low-valence Fe(0)/Fe(II) and Cu(0)/Cu(I) species, which participated as main active components for PMS activation. Density Functional Theory (DFT) calculations on the Fe-Cu bimetallic system showed electronic coupling converges their d -band centers, optimizes PMS adsorption energy (-4.45 eV), and promotes multi-electron transfer (1.45 e⁻). Mechanistic studies, including quenching tests, electron paramagnetic resonance (EPR) tests, galvanic oxidation process (GOP), and methyl phenyl sulfoxide (PMSO) probing experiments, demonstrated that TC degradation proceeded via a multiple nonradical pathway dominated by singlet oxygen (¹O 2 ) from superoxide ( O • − 2 ) disproportionation, supplemented by an electron transfer pathway (ETP) and participation of high-valent metal species (HMS). Ecological Structure-Activity Relationship (ECOSAR) analysis and seed germination tests confirmed significant reductions in the toxicity of degradation intermediates. This work provides an insight into bimetallic synergy for multi-pathway nonradical oxidation applied in PMS-based Fenton-like reactions and a waste-valorization design paradigm.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Guangping Ma,Li Tian,Pengfei Han,Wenzhuo Wang,Hanyue Jiang,Ruixin Li,Huiyuan Mao,Tengying Ma,Juan Lu,Jing Wang
Construction of an electrochemical/colorimetric dual-mode sensing platform. • Ratiometric electrochemical method using methylene blue as an internal reference. • Pre-incubation strategy to activate the peroxidase-like activity of Cu-Fe@C. Ascorbic acid (AA) is an essential biomarker involved in numerous physiological processes, accurate and reliable detection remains a challenge. Herein, we constructed a novel dual-mode sensing platform integrating ratiometric electrochemical detection with pre-incubation-activated colorimetric sensing based on Cu-Fe@C (where ‘@C’ denotes the carbon matrix derived from the carbonization of the copper‑iron metal-organic framework, Cu-Fe-MOF) for self-calibrated AA detection. In the electrochemical mode, Cu-Fe@C exhibited excellent electrocatalytic activity toward AA oxidation, while methylene blue (MB) loaded on mesoporous carbon spheres (MCS) provided a stable internal reference peak at −0.2 V, enabling ratiometric analysis with a linear range of 2.0–720.0 μmol·L −1 and a detection limit of 0.67 μmol·L −1 (S/N = 3). In the colorimetric mode, pre-incubation with AA reduced Fe 3+ and Cu 2+ in Cu-Fe@C to Fe 2+ and Cu + , activating its Fenton-like activity to catalyze the H 2 O 2 -TMB (3,3′,5,5′-tetramethylbenzidine) system, producing a color response with a linear range of 1.0–79.0 μmol·L −1 and a detection limit of 0.33 μmol·L −1 (S/N = 3). The dual-mode configuration provides built-in cross-validation between two independent detection channels, substantially enhancing detection reliability. The sensor was successfully applied to AA determination in green tea and orange juice samples with recoveries of 93.5%–104.8%, demonstrating its practical utility for real-sample analysis. Scheme 1. Illustration of the principle of a dual-mode sensing platform for ascorbic acid based on Cu-Fe@C: ratiometric electrochemical detection and pre-incubation-activated colorimetric detection. Download: Download high-res image (139KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Ji Ma,Jiazhe Yan,Chang Xu,Jianing Gai,Qinzhen Gong,Xiaotao Dai,Chunting Liu,Fengshou Liu
The electrochemical evolution of heterointerfaces in conversion-type anodes has long been poorly understood. Whether engineered interfaces survive cycling, and if not, how separated phases maintain function, remains unclear. Using two model systems Fe 3 C/Fe 3 O 4 /C (inert conductive phase) and Cu 2 O/Cu/C (oxidizable conductive phase), we uncover two diametrically opposite evolution pathways that are dictated solely by the oxidation behavior of the conductive phase. In the inert Fe 3 C system, the initial core-shell interface completely dissociates. Yet the porous carbon network alone maintains electronic connectivity, creating a remote synergy mode in which the carbon network sustains battery operation by compensating for lost heterointerface contact, without requiring direct interfacial contact between the active phases. In the oxidizable Cu system, we directly visualize a phenomenon. Cu 2 O undergoes an electrochemically driven facet reconstruction from the (111) to the (200) orientation, which progressively lowers the overpotential for the Cu → Cu 2 O reaction and makes the electrode self-optimizing with cycling. Post-mortem electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy provide direct visual evidence for both pathways. Kinetic analysis shows mixed diffusion capacitive control, with the CCC system reaching a 46.5% capacitive contribution at 1.0 mV s −1 . Full cells with K-PBA cathodes achieve 75.0% capacity retention after 1000 cycles at 0.5 A g −1 , demonstrating practical viability. This work challenges the long-held assumption that interfacial retention is necessary for electrochemistry. Instead, it establishes a universal design principle for durable conversion-type anodes. Ensuring electron-transport pathway integrity, whether through direct contact or indirect network connectivity, is the key. The discovery of electrochemically driven facet reconstruction also opens new avenues for controlling surface crystallography under operating conditions.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Yuzhen Cai,Zhanping Xiao,Tianqi Cheng,Bo Yuan,Yifan Cui,Jian Lin Chen,Yufei Zhao,Pi-Tai Chou,Yung-Kang Peng
Natural enzymes are efficient catalysts but face high costs and instability, leading to the development of artificial enzymes like nanozymes. While noble metals commonly demonstrate high peroxidase (POD)-like activity, their expense limits their practical use. In contrast, 3d transition metal oxides, though less active, are more cost-effective due to their natural abundance, with Cu(I) emerging as a promising candidate. However, maximizing POD-like activity in small-sized Cu2O nanoparticles (NPs) often requires complex synthetic processes and labor-intensive purification, making mass production challenging. To address these issues, it is crucial to develop POD nanozymes with simplified production methods that would reduce costs and facilitate their real-world applications. Herein, we present a straightforward and scalable method for preparing Cu/Cu2O core/shell NPs densely embedded within a porous carbon-based framework by calcining Cu precursor and polyvinylpyrrolidone (PVP) at elevated temperatures in nitrogen. The resulting samples with Cu/Cu2O NPs around 15 nm in size can be obtained at temperatures below 600 °C. Importantly, they can be used directly without purification, significantly reducing production costs compared to natural enzymes. The sample obtained at 300 °C, exhibiting the highest Cu(I) content, displays optimal POD-like activity and was further demonstrated in the detection of glutathione and glucose. This study is anticipated to guide the future development of scalable and cost-effective POD nanozymes for practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Guanbin Wen,Bin Zhang,Yingzeng Zhang,Qing Wang,Qianqian Guo,Qisheng Wang,Zhengfang Yang,Xiao Wang,Yushu He,Donghui Yang,Luyun Xu
Photocatalytic antibacterial materials, which kill bacteria by generating reactive oxygen species (ROS) without relying on metal ion components, offer higher safety and environmental friendliness, making them a key focus of current antibacterial research. Traditional photocatalytic materials exhibit limited responsiveness to visible light, and their antibacterial efficacy diminishes when the generation of ROS is suppressed. Therefore, this study developed a g-C 3 N 4 /CdS-Cu Z-scheme heterojunction with strong visible light responsiveness, enabling the generation of alternative ROS when one type is inhibited. The material exhibited excellent antibacterial performance under visible light, with antimicrobial rates of 95.46 % and 95.91 % against E. coli and S. aureus , respectively. Microstructural and photoelectric analyses confirmed that the material possessed a tightly coupled two-dimensional heterostructure with full-spectrum absorption capacity and efficient separation of photogenerated charge carriers. Additionally, density functional theory (DFT) calculations revealed changes in electron transfer pathways and energy band structure, further supporting the proposed antibacterial mechanism. In practical application tests, g-C 3 N 4 /CdS-Cu showed good performance in water treatment. This study on the “ROS compensation” mechanism provides a theoretical basis for the development of advanced photocatalytic antibacterial materials and expands their application range.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Chen Wang,Yunpeng Zou,Xiaohui Wu,Xiangling Zhang,Wenjiao Sang,Tao Zhou,Mingjie Huang
Realizing efficiently sustainable generation of singlet oxygen ( 1 O 2 ) in the O 2 activation-based systems is crucial, since 1 O 2 can oxidize many organic pollutants via a non-radical pathway that is preferable in complex water matrices e.g. saline wastewaters. In this study, a boosted strategy that introduced oxygen vacancies (OVs) and surface carboxyl groups (−COOH) onto electron-rich copper‑iron oxides, was proposed by a facile mechanochemical ball-milling process with citrate ligands (Cit). Notably, the resulting Cit@CuFe 2.5 O x catalyst enabled efficient O 2 activation via a selective non-radical pathway, achieving a standardized pseudo-first-order rate constant ( k obs ) of 0.073 min −1 ·g −1 for sulfamethoxazole (SMX) degradation, with over 90 % of the oxidative contribution attributed to 1 O 2 . The ball-milling procedure with Cit could cause the generation of abundant OVs for O 2 adsorption and activation . Mechanistic analysis and theoretical calculations revealed that the OVs accelerated electron transfer from adjacent Cu(I) atoms to adsorbed O 2, facilitating the generation of O 2 − and markedly lowering the free energy barrier for its subsequent conversion to 1 O 2 other than H 2 O 2 . Additionally, the surface-bound −COOH groups facilitated the transformation of molecular O 2 to adsorbed O 2 at OVs sites, further lowering the thermodynamic barrier of the O 2 ⟶ O 2 − ⟶ 1 O 2 pathway. This study provides a simple and cost-effective promotional strategy for O 2 activation by ball-milled electron-rich materials, offering an easily obtained method to induce 1 O 2 -dominated oxidation of recalcitrant organic pollutants in the treatment of high-salinity wastewater.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Xinyuan Wang,Zhuohang Wu,Taozhen Li,Xiaoning Wang,Pijun Duan,Jingwen Pan,Lei Wang
Sulfonamide antibiotics are highly toxic, persistent, and environmentally hazardous, necessitating effective remediation technologies for their removal from aquatic systems. Singlet oxygen ( 1 O 2 ), a selective and pH-tolerant reactive species, has emerged as a key oxidant in persulfate-based advanced oxidation processes (PS-AOPs). Herein, the systematic and novel pathway formation for the 1 O 2 on single Cu atom during PS-AOPs was elucidated. Nitrogen-doped biochar-supported single-atom Cu catalysts featuring low-coordination Cu-N 2 sites (SACu-N 2 @C) were synthesized via calcinating straw biomass, which showed remarkable catalytic efficiency towards sulfamethoxazole (SMX) oxidation even under high-salinity conditions. Results and further elucidated the 1 O 2 formation pathway, where the Cu-N 2 sites adsorbed and interacted the oxygen atom in S O group at the end of peroxymonosulfate (PMS) with lower adsorption energy. This process was accompanied by the generation of two SO 5 •− molecular intermediates, ultimately leading to the formation of 1 O 2 with the lowest energy barrier. Moreover, toxicity tests showed that the degraded SMX solution was ecologically safe with no significant toxic effects on zebrafish, rice and Escherichia coli ( E. coli ). This study provides atomic-level insights into 1 O 2 generation via Cu-N 2 coordination, advancing the design of efficient and environmentally benign Fenton-like systems for antibiotic wastewater treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子