Small
·
2023
·
IF 13.3
Rui Pei,Jing Liu,Chuanyong Jing,Min Zhang
The reduction of carbon dioxide to valuable chemicals through enzymatic processes is regarded as a promising approach for the reduction of carbon dioxide emissions. In this study, an in vitro multi-enzyme cascade pathway is constructed for the conversion of CO 2 into dihydroxyacetone (DHA). This pathway, known as FFFP, comprises formate dehydrogenase (FDH), formaldehyde dehydrogenase (FaldDH), formolase (FLS), and phosphite dehydrogenase (PTDH), with PTDH serving as the critical catalyst for regenerating the coenzyme NADH. Subsequently, the immobilization of the FFFP pathway within the hydrogen-bonded organic framework (HOF-101) is accomplished in situ. A 1.8-fold increase in DHA yield is observed in FFFP@HOF-101 compared to the free FFFP pathway. This enhancement can be explained by the fact that within FFFP@HOF-101, enzymes are positioned sufficiently close to one another, leading to the elevation of the local concentration of intermediates and an improvement in mass transfer efficiency. Moreover, FFFP@HOF-101 displays a high degree of stability. In addition to the establishment of an effective DHA production method, innovative concepts for the tailored synthesis of fine compounds from CO 2 through the utilization of various multi-enzyme cascade developments are generated by this work.
✓ 已验证
DOI
PubMed
高影响因子
CATALYSIS LETTERS
·
2019
·Vol. 150
·期 5
·1418-1426
·
IF 2.372
Ma Yuan,Liu Jiao,Chu Mo,Yue Junrong,Cui Yanbin,Xu Guangwen
Abstract The key challenge for CO 2 methanation, an eight-electron process under kinetic limitation, relies on the design of non-noble metal catalysts so as to achieve high activity at low reaction temperatures. In this work, four Ni-based catalysts with different supports were prepared and tested for CO 2 methanation at 250–550 °C in a fixed bed quartz reactor and further characterized to reveal the structure–function relationship. The Ni-based catalysts followed an activity order of Ni/CeO 2 > Ni/Al 2 O 3 > Ni/TiO 2 > Ni/ZrO 2 , especially at temperatures lower than 350 °C. H 2 -TPR and TPD results indicated that the interaction between nickel and support was strong and the metallic nickel was well dispersed in the Ni/Al 2 O 3 catalyst, while more amount of CO 2 was adsorbed on the weak basic sites in the Ni/CeO 2 catalyst. By establishing the correlation between the catalytic performance and the catalyst structure, it was found that the Ni nanoparticles and basic support serve as H 2 and CO 2 active centers respectively and cooperatively catalyze CO 2 methanation, resulting in high low-temperature reaction activity. Graphic Abstract High CO 2 conversion was achieved over Ni/CeO 2 catalyst at 300 °C for its high H 2 uptake on Ni nanoparticles and high CO 2 adsorption capacity on the support with weak basic sites and cooperatively to catalyze CO 2 methanation.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2018
·
IF 4.439
Pan Li,Chunchao Hou,Xuehua Zhang,Yong Chen,Tao He
The hybrid coupling between inorganic semiconductor and molecular catalyst can provide a promising approach for the construction of highly efficient and selective photocatalytic CO 2 reduction systems. This hybrid system can take full advantage of the strong light harvesting capability of semiconductor and high selectivity of molecular catalyst. The interaction linker bridging the semiconductor and molecular catalyst plays an important role in supplying efficient electron transfer channels. In this study, both CdS with and without ethylenediamine functionalization (i.e., CdS-EF and CdS) have been successfully synthesized and further respectively coupled with tetra(4-carboxyphenyl)porphyrin iron(III) chloride (FeTCPP) for CO 2 photoreduction. It is found that CdS-EF exhibits inferior photocatalytic activity to CdS, while CdS-EF/FeTCPP hybrid photocatalyst shows much higher activity than CdS/FeTCPP. This is because hydrogen bonding exists between the amino groups in CdS-EF and carboxyl groups in FeTCPP, which can act as electron transfer channels from CdS to FeTCPP in the obtained hybrid system.
✓ 已验证
DOI
高影响因子
AICHE JOURNAL
·
2025
·
IF 4
Jia Xiong,Qiang Sun,Hongxia Gao,Zhiwu Liang
Catalytic amine–based solution regeneration has attracted considerable attention due to its potential to reduce energy consumption in carbon dioxide (CO 2 ) separation. However, the limited catalytic activity and cycling stability of catalysts under high–temperature alkaline conditions hinder their industrial application. Herein, zirconium hydrogenphosphate (ZrHP) catalysts, featuring abundant acidic sites, were first utilized for amine solution regeneration. By leveraging its proton donation and acceptance mechanism, efficient monoethanolamine solution regeneration was achieved. The ZrHP–4 catalyst demonstrated a 526% increase in the instantaneous CO 2 desorption rate compared to the non–catalytic test, reducing the relative heat duty by 48%. Moreover, ZrHP–4 exhibited remarkable stability over 10 cycles without requiring regeneration. Density functional theory calculations revealed that ZrHP promotes CO 2 desorption by elongating the C—N bond of carbamate and lowering the proton transfer energy barrier. Therefore, this study offers novel insights into the design and mechanistic understanding of efficient and stable catalysts for amine solution regeneration.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2025
·
IF 4.2
Xijun Li,Runze Xue,Yuan Liu,Cuijuan Zhang
Development of highly active and stable catalysts is critical for the hydrogenation of CO2 to methanol. Herein, a Cu-based catalyst was demonstrated by impregnating 20%ZnO onto the Cu–Al spinel followed by reduction. The catalyst delivers a methanol yield of 0.218 g g−1 h−1 with a CO2 conversion of 9.2% at 220 °C, 3 MPa, 6000 mL g−1 h−1, and is stable over a 300 h test. Various characterization techniques reveal that ZnO inhibits the growth of Cu nanoparticles during exsolution. Furthermore, there is strong electronic interaction between the components, i.e., the electron migrates from ZnO to the Cu–Al spinel, which leads to more oxygen vacancies and an electron-rich support and thus beneficial for CO2 hydrogenation to methanol.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS TODAY
·
2025
·
IF 5.3
Biao Gao,Wenbo Gao,Longtai Li,Tatsumi Ishihara,Limin Guo
The In 2 O 3 -ZrO 2 solid solution catalyst has emerged as a versatile catalytic support for CO 2 hydrogenation to methanol, enabling noble metal-based systems (e.g., Pt, Ir) to achieve improved methanol selectivity. Building on this foundation, we introduce cobalt into the In 2 O 3 -ZrO 2 matrix, creating a novel Co/In 2 O 3 -ZrO 2 composite catalyst that synergistically integrates transition metal functionality with oxide engineering. The optimized catalyst achieves a methanol space-time yield of 0.80 g MeOH ·gcat −1 ·h −1 at a 5.0 MPa, H 2 /CO 2 = 3:1, 320 °C, GHSV = 48,000 cm 3 · g cat − 1 · h −1 , surpassing reported In 2 O 3 -ZrO 2 and Co/In 2 O 3 benchmarks. Mechanistic studies reveal that methanol synthesis follows the formate pathway, where ZrO 2 amplifies oxygen vacancy density to improve CO 2 adsorption and weakens CO adsorption through electronic modulation.
✓ 已验证
产品关联
DOI
高影响因子
AICHE JOURNAL
·
2025
·
IF 4
Qi Liu,Yihan Yin,Tong Luo,Min Xiao,Hongxia Gao,Wilfred Olson,Zhiwu Liang
Amine blend is a viable method to formulate superior absorbents for CO 2 capture from flue gas. However, the understanding of the degradation of blended amines, especially the interaction effect on the degradation pathway is limited, which restricts the solvent development. In this work, the oxidative degradation of 1-amino-2-propanol (1AP) and its blends with various tertiary amines is studied by analyzing amine loss, alkalinity loss, viscosity change, NH 3 emission, and heat-stable salt generation. Experimental results show that both triethanolamine and N -methyldiethanolamine have an excellent inhibition effect on 1AP oxidative degradation, reducing 1AP loss from 47.0% to 6.5% and 8.5%, respectively. The reaction pathways for the oxidative degradation of single and blended 1AP solutions are proposed and evaluated by density functional theory calculations. Computational results show that the reactions between 1AP peroxide radicals and peroxide radicals of tertiary amines reduce 1AP loss, which agrees with experimental results.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2026
·
IF 5.1
Xiang Duan,Qingpeng Cheng,Xiaotong Sun,Shaohui Xiong,Wei Liu,Maofeng Ding,Jiayan Yan,Qicheng Zhang,Ye Tian,Prasert Reubroycharoen,Jorge Gascon,Xingang Li
Heterophase junction engineering enables intrinsic promotion without additives. • Electron-rich S v obtained via 1T → 2H charge transfer boosts intrinsic activity. • Heterophase junctions redistribute network with formate pathway promoted. Thermocatalytic hydrogenation of CO 2 to methanol offers a promising route for carbon recycling and renewable energy storage, yet achieving high activity and methanol selectivity under low-temperature conditions remains challenging. Herein, we construct MoS 2 catalysts with tunable 1T/2H phase ratios by phase engineering, enabling the formation of well-defined heterophase junctions. Through interfacial charge transfer, metallic 1T domains serve as intrinsic electron donors to sulfur vacancies on adjacent 2H domains, thereby modulating their electronic structure. This heterophase-junction-mediated electronic regulation enhances the intrinsic catalytic activity while steering methanol synthesis toward the formate-mediated pathway. Consequently, the optimized 1T/2H-700 catalyst containing 4.7% 1T phase exhibits approximately 1.6-fold intrinsic activity compared with the pure 2H phase catalyst, achieving an impressive 6.3% CO 2 conversion and 87.1% methanol selectivity at the low temperature of 200 °C. More importantly, this work establishes heterophase junction engineering as an intrinsic-promoter strategy for electronic regulation of catalytic sites, providing a new catalyst design principle beyond conventional promoter-assisted systems. Download: Download high-res image (138KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 42
·21110-21119
·
IF 9.931
Qiaoqiao Mu,Wei Zhu,Gangbin Yan,Yuebin Lian,Yuanzhou Yao,Qin Li,Yuyu Tian,Peng Zhang,Zhao Deng,Yang Peng
The development of efficient and economical catalysts for photocatalytic reduction of CO2 into chemical feedstocks is highly desirable for addressing both the global energy crisis and carbon emission problem. Herein, a series of carbonized cobalt composites derived from bimetallic Zn/Co zeolitic imidazolate frameworks (C-BMZIFs) are synthesized and used as the co-catalysts for [Ru(bpy)3]2+ mediated photocatalytic CO2 reduction under visible light irradiation. Varying the Zn/Co ratio allows regulation of the size of Co active sites, which further differentiates their catalytic activity towards CO2 reduction and H2 evolution, resulting in tunable CO/H2 ratio in the produced syngas. Among all investigated configurations, the C-BMZIF with a Zn/Co ratio of 3 : 1 demonstrates the highest CO yield of 1.1 × 104 μmol g−1 h−1, owing to the optimal balance between the quantity of active sites and the activity of each individual site. Consequently, this work provides insight into the design of stable MOF-derived co-catalysts for efficient photo-reduction of CO2, and offers an alternative solution for photocatalytic syngas production with tunable CO/H2 ratio.
✓ 已验证
DOI
高影响因子
CATALYSIS TODAY
·
2019
·
IF 4.888
Yunxia Zhao,Hui Ge,Yuanyuan Miao,Jiaxin Chen,Wei Cai
Metal-organic framework (MOF) materials have significant advantages for capturing CO 2 . To further improve the CO 2 adsorption performance of MOFs, a compound material of l -arginine modified graphene oxide (GO) with MOFs (MOF/GO-Arg) was synthesized. Introduction of amino acid-functionalized lamellar GO into MOF material not only generated new pores at their interface to improve the adsorption of the MOF but also promoted the CO 2 capture at low humidity. The structural and chemical properties of the parent components and composite materials were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), N 2 adsorption-desorption, thermal analysis and scanning electron microscopy (SEM). The dynamic CO 2 adsorption properties of the materials were compared under different temperatures, flow rates and humidities. Three kinetic models were used to fit the adsorption curves of the as-synthesized adsorbents under different conditions, and then the optimal dynamic model was determined. Since the reusability of the adsorbents is especially important for the use of these materials in practice, the CO 2 adsorption was repeated for 10 cycles under optimal temperature, flow rate and high humidity conditions.
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Jichao Hu,Lei Ding,Zedong Niu,Qiwen Sun,Lingzhi Mu,Pengfei Qu,Lemeng Wang,Ming Li,Pan Zhang,Kun Zhao,Dong Fu
A bimetallic-based Molecular Sieve Catalysts (SZ/Cu@MCM-41) was developed. • The catalytic CO 2 desorption performance of the SZ/Cu@MCM-41 was investigated. • The SZ/Cu@MCM-41 reduced the relative heat duty to 26.42%. • The SZ/Cu@MCM-41 exhibited excellent stability. • A possible catalytic CO 2 desorption mechanism was proposed over SZ/Cu@MCM-41. The excessive energy demand of amine-based CO 2 capture technologies continues to pose a critical barrier to its large-scale deployment. Herein, a bimetallic molecular sieve catalyst, SZ/Cu@MCM-41, was successfully fabricated using a one-step hydrothermal approach and subsequently employed to catalyze CO 2 desorption. The incorporation of Cu and Zr not only preserved the mesoporous framework but also significantly enlarged the pore volume and diameter, while substantially enhancing the density and strength of acid sites. Experimental results show that the introduction of only 0.125 wt% SZ/Cu@MCM-41 resulted in a 102% increase in the CO 2 desorption rate and a 26.42% decrease in relative energy consumption. Arrhenius fitting results revealed that the activation energy was decreased by 32.2%. Furthermore, five consecutive regeneration cycles and degradation experiments demonstrated the excellent stability and durability of the catalytic system. The catalytic mechanism was further investigated through combined characterizations and density functional theory (DFT) calculations, demonstrating that the synergistic effect of the bimetallic catalyst significantly lowered the energy barriers for both carbamate decomposition and protonated amine deprotonation. This study provides experimental support and theoretical insight that successfully demonstrates efficient CO 2 desorption under mild-temperature conditions, achieved through the synergistic catalytic effects of bimetallic catalysts. Download: Download high-res image (180KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Materials Chemistry Frontiers
·
2021
·Vol. 5
·期 14
·5319-5327
·
IF 6.482
Yuchuan Liu,Shun Wang,Xianyu Meng,Yu Ye,Xiaowei Song,Zhiqiang Liang
The synthesis of high-surface-area porous organic polymers (POPs) for CO2 capture and storage (CCS) has received significant attention from researchers. However, the construction of POPs with a large surface area still remains challenging in synthetic chemistry, because of the complex formation process of the porous skeletons. Herein, we developed a facile post-knitting method to increase the surface area of conjugated microporous polymers (CMPs) to improve the CO2 adsorption capacity. Four CMPs were knitted using two different cross-linkers via a Friedel–Crafts reaction to obtain eight CMP-based hyper-crosslinked polymers (KCMPs), respectively. These resulting KCMPs exhibit a high Brunauer–Emmett–Teller (BET) surface area and total pore volume up to 2267 m2 g−1 and 3.27 cm3 g−1, which are 2.3 times and 8.8 times higher than the corresponding CMPs, respectively. In addition, these KCMPs show obvious increases in the CO2 uptake with the best-performing KCMP-M4 of 3.98 mmol g−1 (89.2 cm3 g−1) at 1 bar and 273 K, an increase of 122.2% compared to the pristine CMP-4. This post-knitting method can provide more potential porous adsorbents for CCS technologies and could be used to further develop novel methods for the synthesis of high-surface-area POPs.
✓ 已验证
DOI
高影响因子