Journal of Materials Chemistry A
·
2026
·
IF 9.5
Qing Cheng,Yuqi Zhang,Yingying Cao,Long Liu,Yanqiang Zhang
The novel ionic liquid-H2O2 propellants are urgently to solve the intrinsic ignition problem for achieving the aerospace applications. We addressed this issue by tuning the d-band center to adjust the catalyst's adsorption strength for IL/H2O2 toward the optimal value, thus enhancing catalytic activities for the efficient decomposition of H2O2 to generate reactive oxygen species. Herein, the regulation of the d-band center of Cu(I) in Cu(I)-MOF catalyst by precise ligand engineering design was studied. Remarkably, The Cu-S3 coordination of Cu-SH' shifts its d-band center closer to the Fermi level, promoting the adsorption of [BMIM]N(CN)2 and H2O2. Cu-SH' enables efficient H2O2 activation and robust •OH and 1 O2 generation to trigger the rapid self-ignition of [BMIM]N(CN)2-H2O2 propellant. The resulted tid as low as 18.4 ms is nearly 34% lower than that of homogeneous catalyst [FcCH2N(CH3)3]2[Cu2I4]. This work provides fundamental insights into the design of efficient ligand-based combustion catalysts for the higher performance of rockets and spacecrafts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COORDINATION CHEMISTRY
·
2016
·
IF 1.756
Xi Wang,Xianying Duan,Caiyi Kong,Meilin Wei
A proton-conductive complex based on decorated Keggin-type cluster, {[Cu(dmbipy)(H2O)3]2[SiW12O40]}·7H2O (where dmbipy is 4,4′-dimethyl-2,2′-bipyridine) (1), was synthesized by reaction of CuSiW12O40·nH2O and dmbipy at room temperature. The product was characterized by elemental analysis, infrared spectroscopy, and single-crystal X-ray diffraction analysis. Single-crystal X-ray diffraction analysis at 293 K revealed that 1 crystallized in the monoclinic space group C2/c and has a 3-D supramolecular network with 1-D hydrophilic channels constructed by a decorated Keggin-type cluster, [Cu(dmbipy)(H2O)3]2SiW12O40, and solvent water molecules via hydrogen-bonding interactions. Thermogravimetric analysis suggests that 1 has high-thermal stability and good water binding in 1-D hydrophilic channels from 20 to 100 °C. Compound 1 exhibits good proton conductivities (over 10−3 S cm−1) at 100 °C in the relative humidity range 35–98%.
✓ 已验证
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 9.8
Jia-Qi Lyu,Jiang-Tao Xu,Hui-Ting Hu,Zhencheng Chen,Guo-Cheng Han,Xiao-Zhen Feng,Heinz-Bernhard Kraatz
An electrochemical detection method was proposed for the detection of Melatonin (MT) based on the synergistic signal amplification of L-Cys and core-shell Cu@Pt bimetallic nanoparticles (Cu@PtNPs). The successful fabrication of the PL-Cys/Cu@PtNPs/GCE was confirmed by characterization techniques including SEM, XRD, and TEM. The method exhibited excellent analytical performance, with a low detection limit of 0.03 μmol/L and a wide linear range across two concentration intervals: 0.1–100.0 μmol/L and 100.0–900.0 μmol/L. The method's practical applicability was successfully validated in human serum and various food samples, achieving satisfactory recovery rates of 98.73 %–99.67 % and 99.49 %–108.57 %, respectively, with relative standard deviations below 6.85 %. The novelty of this work lies in the synergistic amplification effect of the Cu@PtNPs and L-Cys and the application of density functional theory (DFT) calculations to elucidate the MT electrooxidation mechanism, confirming a 2-electron, 1-proton transfer process.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2014
·
IF 4.058
Lichun Fu,Fuqiang Liu,Yan Ma,Xuewen Tao,Chen Ling,Aimin Li,Chendong Shuang,Yan Li
Magnetic strongly basic anion exchange resin (MAEX) and weakly acidic cation exchange resin (MCEX) and their combined processes were employed to simultaneously remove such heavy metals (HMs) as Cu(II), Ni(II) and tannic acid (TA). Both MAEX and MCEX resins exhibited co-removal capability for Cu(II) and TA in binary solutions. Complexing-bridging was ascribed as the primary mechanism for the co-removal of TA and Cu(II) based on Density-Functional-Theory (DFT) calculation, fluorescence spectra, Fourier Transform Infrared Spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) characterization. Moreover, an interesting discovery was found that hydrogen bond interaction between both nitrogen atom of the secondary amine ( NH ) and oxygen atom of carbonyl (C O) with un-ionized TA, and quaternary ammonium ( N + (CH 3 ) 3 ) ion exchange with ionized TA were ascribed to the mechanism of TA adsorption onto MAEX. The novel integrative technique based on MAEX and MCEX mixed completely in the same reactor could simultaneously remove Cu(II), Ni(II) and TA with high efficiencies of 92.1%, 94.8% and 88.4%, respectively. Three adsorbates could be successfully recovered with 0.1 M NaOH followed by 0.01 M HCl solution. Given the stable application for five cycles, combined magnetic resin treatment showed great potential in simultaneous removal of Cu(II), Ni(II) and TA.
✓ 已验证
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2018
·
IF 6.759
Xiaolong Liu,Qingzhen Han,Wenbo Shi,Cheng Zhang,Erwei Li,Tingyu Zhu
In this work, ruthenium-based bimetallic catalysts of 1Ru-5 M/TiO 2 (M = Co, Ce, Fe, Mn, Cu, Ni) were prepared and evaluated in ethyl acetate oxidation. It was found that 1Ru-5Cu/TiO 2 gave the highest catalytic activity. The influence of CuO content and the preparation method on the catalytic activity was also studied. 1Ru-5Cu/TiO 2 showed great catalytic stability in the on-stream reaction test. The influence of H 2 O on the catalytic activity is presented. The bimetallic catalyst 1Ru-5Cu/TiO 2 showed better catalytic performance than the monometallic catalysts 1Ru/TiO 2 and 5Cu/TiO 2 . XRD, TEM, HAADF-STEM, H 2 -TPR, and XPS characterizations were conducted, and the synergistic effect between Ru and Cu was well presented. In situ FTIR studies were also conducted, and the reaction intermediates were revealed on the catalyst surface. The theoretical calculations suggested that ethyl acetate is more easily adsorbed on the CuO surface, while it reacts more easily on the RuO 2 surface . Accordingly, a reaction mechanism for the catalytic oxidation of ethyl acetate over a Ru-Cu bimetallic catalyst is proposed.
研究领域:
催化化学
·
环境化学
·
表面科学
·
材料化学
·
物理化学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2012
·Vol. 129
·期 4
·1799-1805
·
IF 1.289
Yinchuan Tang,Qinglin Ma,Yafei Luo,Li Zhai,Yuju Che,Fanjun Meng
This study focuses on an improved synthesis of a branched poly (ethylene imine) (PEI)-modified cellulose-based adsorbent (Cell- g -PGMA-PEI). We aim to improve the adsorbent capacity by reducing side reaction of epoxide ring opening during graft copolymerization of glycidyl methacrylate (GMA) onto cellulose which increases the content of epoxy groups, anchors to immobilize branched PEI moieties. FTIR spectra provided the evidence of successful graft copolymerization of GMA onto cellulose initiated by benzoyl peroxide (BPO) and modification with PEI. The amount of epoxy groups of Cell- g -PGMA was 4.35 mmol g −1 by epoxy titration. Subsequently, the adsorption behavior of Cu(II) on cell- g -PGMA-PEI in aqueous solution has been investigated. The data from the adsorption kinetic experiments agreed well with pseudo-second-order model. The adsorption isotherms can be interpreted by the Langmuir model with the maximum adsorption capacity of 102 mg g −1 which was largely improved compared with the similar adsorbent reported. The dynamic adsorption capacity obtained from the column tests was 119 mg g −1 and the adsorbent could be regenerated by HCl of 0.1 mol L −1 . Results indicate that the novel pathway for the synthesis of Cell- g -PGMA-PEI exhibits significant potential to improve the performance of adsorbents in removal and recovery of Cu(II) from aqueous solution. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
研究领域:
环境科学
·
高分子化学
·
水处理技术
·
吸附材料
·
重金属去除
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Rong Wang,Shuai Zhang,Chenyu Zhao,Siyuan Luo,Zepu Chang,Jingran Di,Ying Hao,Daocheng Wu
To overcome the critical limitations of poor spatiotemporal coordination and inefficient energy delivery in photodynamic-thermodynamic (TDT-PDT) tumor therapy, we propose a free radical spatiotemporal-matching strategy to enhance therapeutic synergy. An optimized photoelectric therapy needle (PTN) and indocyanine green (ICG)-Cu(II)-AIBI infinite coordination polymer nanoparticles (ICP NPs) were rationally engineered to implement this strategy. The PTN enables precise codelivery of laser irradiation and electric current to the tumor core, achieving spatial overlap of photodynamic and electrothermal activation and free radical generation. The ICP NPs exhibit a high dual-drug loading (85.2%) and pH-responsive release, promoting tumor-selective accumulation and activation. This strategy ensures both spatial overlap and temporal alignment of singlet oxygen and alkyl radical production, maximizing oxidative damage. The ICP NPs display a high maximum tolerated dose (352.10 mg kg–1), markedly reducing systemic toxicity. In vitro, ICP NPs exhibit potent cytotoxicity against 4T1 cells (IC50 = 4.14 μg mL–1, combination index = 0.13), indicating strong synergism. In vivo, under low-energy stimulation and without chemotherapy, this strategy achieves complete tumor inhibition, a low recurrence rate (25% at 60 days), and negligible systemic toxicity. This work establishes a precise, low-toxicity paradigm for spatiotemporally matching dynamic therapy with strong translational potential.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2025
·
IF 6.5
Yanfei Liu,Yanbo Pu,Chun Du,Jie Xu,Yaohui Dun,Chengxiong Wang,Yunkun Zhao,Jun Huang,Bin Shan,Rong Chen
Selective catalytic oxidation of ammonia (NH 3 -SCO) to N 2 is crucial for abating residual NH 3 emissions, but existing catalysts struggle to combine low-temperature activity with high N 2 selectivity due to competitive Pt-NO interactions. Here we design a tandem confinement catalyst by depositing sub-nanometer Pt clusters (∼0.72 nm) inside the supercages of a Cu-exchanged USY zeolite via atomic layer deposition (ALD), creating intimately paired Pt–Cu active sites. This confined Pt/Cu-USY ALD catalyst achieves >90 % NH 3 conversion and >90 % N 2 selectivity across an exceptionally broad 170-300°C window under simulated exhaust conditions, surpassing all previously reported Pt-based NH 3 -SCO catalysts. The simultaneously enhanced low-temperature activity and high-temperature N 2 selectivity of the Pt/Cu-USY ALD catalyst can be attributed to the spatial confinement of Pt clusters within the Cu-USY framework, which leads to an expanded NO desorption window (150–350 °C). Detailed in situ studies further reveal that N 2 O 4 species preferentially serve as NO storage intermediates on the Pt/Cu-USY ALD catalyst surface at low temperatures, exhibiting significantly lower formation barriers compared to free nitrates, which dominate as intermediates in conventional Pt–Cu systems. This effectively mitigates free nitrate–induced site poisoning and overcomes the typical activity–selectivity trade-offs observed in conventional Pt–Cu dual-site catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Nanomaterials
·
2018
·Vol. 2018
·期 1
·1634814
·
IF 2.207
Lianbing Zhong,Guihong Geng,Yujin Wang,Feng Ye,Limeng Liu
A fully dense TaC ceramic was prepared by hot pressing using 10 mol% ZrC plus 5 mol% Cu as a sintering aid. Formation of (Ta, Zr)C solid solution (ss) by reaction between TaC and ZrC facilitated densification. Addition of Cu refined the microstructure and consequently improved flexural strength of the TaC ceramics. TEM investigation found ubiquitous precipitation of nanocrystallites at multigrain conjunctions. The nanocrystallites were (Ta, Zr)C solid solution with uniform dispersion in an oxygen-rich glassy matrix. Although formation of nanoprecipitates may not much affect the mechanical properties of the TaC ceramic, the structure suggested a new type of nanoceramic worth further research.
研究领域:
材料科学
·
陶瓷学
·
固态化学
·
显微结构分析
·
复合材料
✓ 已验证
DOI
高影响因子
ChemistrySelect
·
2023
·Vol. 8
·期 9
·e202204413
·
IF 2.1
Pengxin Li,Huanzhao Liu,Chunyu Wang,Yi Fang,Zhonglu Guo,Jing Lin,Yang Huang,Chao Yu,Long Hu,Chengchun Tang,Zhenya Liu
Graphical The article reports the successful preparation of Cu 0.9 Ni 0.1 / p -BN nanocomposites as catalyst by a facile in situ reduction method using p -BN as a template. The hollow porous Cu 0.9 Ni 0.1 / p -BN composites exhibited excellent catalytic performance in the dehydrogenation from methanolysis of ammonia-borane. Dehydrogenation from methanolysis of ammonia borane is a promising strategy for the development of sustainable hydrogen energy. Developing an effective and inexpensive catalyst is essential. In our study, a series of Cu−Ni nanoparticles, in the form of alloy, are supported onto porous boron nitride fibers by impregnation reduction. Cu and Ni synergistically interact through the alloys, Cu 0.9 Ni 0.1 / p -BN demonstrates excellent catalytic effect with high turnover frequency (27.1 min −1 ) and low activation energy (27.8 kJ/mol) at 298 K. Kinetics indicates that the catalyst concentration follows the quasi-primary reaction. Moreover, the pores of the p -BN supporter prevent agglomeration of the metal particles while limiting their size, as well as providing protection to the particles. After passing 8 cycles, the catalyst does not suffer from severe poisoning effects. This work greatly enriches the non-precious metal catalyst system and plays a very meaningful role in the study of dehydrogenation from methanolysis of AB.
✓ 已验证
产品关联
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2023
·
IF 9.8
Jing Wang,Binghong Chen,Hongjun Lin,Renjie Li
Electroflotation-membrane separation system with a conductive membrane has recently emerged as a promising technology for oily wastewater treatment . However, the conductive membrane prepared by electroless plating often suffers the problems of low stability and high activation cost. To solve these problems, this work proposed a new strategy regarding surface metallization of polymeric membrane by surface nickel-catalyzed electroless nickel plating of nickel‑copper‑phosphorus alloys for the first time. It was found that, addition of copper source remarkably enhanced the membranes' hydrophilicity, corrosion resistance and fouling resistance. The Ni-Cu-P membrane had an underwater oil contact angle of up to 140°, and simultaneously possessed rejection rate > 98 % with rather high flux of 65,663.0 L·m −2 ·h −1 and excellent cycling stability when separating n-hexane/water mixtures under gravity drive. The permeability is higher than the state-of-the-art membranes for oil/water separation. The Ni-Cu-P membrane as the cathode can be assembled into an electroflotation-membrane separation system, allowing to separate oil-in-water emulsion with 99 % rejection. Meanwhile, the applied electric field significantly improved membrane flux and fouling resistance (flux recovery up to 91 %) when separate kaolin suspensions. Polarization curve and Nyquist curve analysis further confirmed that addition of Cu element obviously enhanced corrosion resistance of the Ni modified membrane. This work provided a novel strategy to make up high-efficiency membranes for oily wastewater treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL TECHNOLOGY
·
2023
·
IF 2.8
Songyuan Hao,Hong Yuan,Huiliang Zhou
Ni-Cu/Al-KCC-1 catalysts with different metal contents were prepared using fibrous nano-silica (Al-KCC-1) as a support. Field emission scanning electron microscopy observations showed that the spherical particle morphology and fibrous structure of the Al-KCC-1 were not changed after metal loading. Transmission electron microscopy images demonstrated that the introduction of copper improved the dispersion of the nickel, while X-ray diffraction and hydrogen temperature-programmed reduction confirmed the formation of a Ni-Cu alloy. The N2-Brunauer–Emmett–Teller specific surface areas of the catalysts were in the range of 269–378 m2/g and the average pore diameters were 7.988–12.078 nm. These Ni-Cu/Al-KCC-1 catalysts were used to promote the cracking of waste cooking oil model compound (WCOMC) to produce H2 and carbon nanotubes (CNTs), and the 10 wt% Ni-5 wt% Cu/Al-KCC-1 exhibited the highest catalytic activity. At a WCOMC flow rate of 0.04 mL/min and 750 °C, the instantaneous volume fraction of H2 reached 49.8 vol% and the content of H2 in the gaseous product was close to 71.4 vol%.
✓ 已验证
产品关联
DOI
PubMed
高影响因子