AMB Express
·
2018
·Vol. 8
·期 1
·1-10
·
IF 1.719
Zhang Xingran,Ma Jinxing,Chen Mei,Wu Zhichao,Wang Zhiwei
Extensive applications of quaternary ammonium compounds (QACs) in household and industrial products inevitably lead to their release into wastewaters; however, little attention has been paid to the acute effects on activated sludge. In this work, we investigated the responses of microorganisms in a membrane bioreactor (MBR) to transient shock loads of QACs with different alkyl chain length and their impacts on MBR performance. Results showed that QACs affected microbial viability and caused damage to key enzymes (e.g., ammonium monooxygenase and nitrite oxidoreductase), inhibiting organic matter degradation and nitrogen removal. The presence of QACs also caused negative influences on dehydrogenase activity, catalase and superoxide dismutase, thus increasing the production of reactive oxygen species. Moreover, QACs with longer alkyl chains and/or benzyl groups bonded to the nitrogen atom could induce a more severe damage to cell integrity and microbial viability. The interaction with QACs also induced the release of organic matters and the changes of adhesion properties of microbial products, resulting in aggravated membrane fouling in MBRs. Our results demonstrate the acute negative effects of QACs on activated sludge, and special attention should be paid to the performance of biological wastewater treatment processes subject to the shock loads of QAC-bearing industrial streams.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ARCHIVES OF MICROBIOLOGY
·
2018
·Vol. 201
·期 4
·451-458
·
IF 1.607
He Tian-Fu,Wang Lang-Hong,Niu De-bao,Wen Qing-hui,Zeng Xin-An
In this study, the antimicrobial mechanism of cinnamaldehyde (CIN) against Gram-negative Escherichia coli ATCC 25922 ( E. coli ) based on membrane and gene regulation was investigated. Treatment with low concentration (0, 1/8, 1/4, 3/8 MIC) of CIN can effectively suppress the growth of E. coli by prolonging its lag phase and Raman spectroscopy showed obvious distinction of the E. coli after being treated with these concentration of CIN. The determination of relative conductivity indicated that CIN at relatively high concentration (0, 1, 2, 4 MIC) can increase the cell membrane permeability, causing the leakage of cellular content. Besides, the content of malondialdehyde (MDA) and the activity of total superoxide dismutase (SOD) of E. coli increased with increasing treatment concentration of CIN, implying that CIN can cause oxidative damage on E. coli cell membrane and induce the increase of total SOD activity to resist this oxidative harm. Moreover, quantitative real-time RT-PCR (qRT-PCR) analysis revealed the relationship between expression of antioxidant genes (SODa, SODb, SODc) and treatment CIN concentration, suggesting that SOD, especially SODc, played a significant role in resistance of E. coli to CIN. The underlying inactivation processing of CIN on E. coli was explored to support CIN as a potential and natural antimicrobial agent in food industry.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Protocols
·
2018
·Vol. 13
·期 10
·2362-2386
·
IF 12.423
Zou Yejun,Wang Aoxue,Shi Mei,Chen Xianjun,Liu Renmei,Li Ting,Zhang Chenxia,Zhang Zhuo,Zhu Linyong,Ju Zhenyu,Loscalzo Joseph,Yang Yi,Zhao Yuzheng
Cellular oxidation–reduction reactions are mainly regulated by pyridine nucleotides (NADPH/NADP + and NADH/NAD + ), thiols, and reactive oxygen species (ROS) and play central roles in cell metabolism, cellular signaling, and cell-fate decisions. A comprehensive evaluation or multiplex analysis of redox landscapes and dynamics in intact living cells is important for interrogating cell functions in both healthy and disease states; however, until recently, this goal has been limited by the lack of a complete set of redox sensors. We recently reported the development of a series of highly responsive, genetically encoded fluorescent sensors for NADPH that substantially strengthen the existing toolset of genetically encoded sensors for thiols, H 2 O 2 , and NADH redox states. By combining sensors with unique spectral properties and specific subcellular targeting domains, our approach allows simultaneous imaging of up to four different sensors. In this protocol, we first describe strategies for multiplex fluorescence imaging of these sensors in single cells; then we demonstrate how to apply these sensors to study changes in redox landscapes during the cell cycle, after macrophage activation, and in living zebrafish. This approach can be adapted to different genetically encoded fluorescent sensors and various analytical platforms such as fluorescence microscopy, high-content imaging systems, flow cytometry, and microplate readers. A typical preparation of cells or zebrafish expressing different sensors takes 2–3 d; microscopy imaging or flow-cytometry analysis can be performed within 5–60 min.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHEMICAL ECOLOGY
·
2018
·Vol. 44
·期 10
·965-974
·
IF 2.419
Zhang Hongfei,Li Weizheng,Luo Qianwen,Yang Lei,Gong Dongfeng,Teng Xiaohui,Guo Xianru,Yuan Guohui
The castor bean, Ricinus communis L., is a non-host plant for the large black chafer, Holotrichia parallela Motschulsky (Coleoptera: Scarabaeidae). In laboratory bioassays we found that this plant was no less attractive than the main host plant (peanut, Arachis hypogaea ) and three food plant species: velvetleaf ( Abutilon theophrasti ), the glossy privet ( Ligustrum lucidum ), and the Siberian elm ( Ulmus pumila ). In field trapping experiments a Soxhlet extract of castor bean leaves caught more beetles than the optimal sex lure blend [( R )-(−)-linalool and ( L )-isoleucine methyl ester blended in a ratio of 1:4], compared at equal doses (500 μl), and laboratory bioassays indicated that a castor bean plant could enhance the attractiveness of different blend ratios of sex lures. Olfactometer bioassays showed that males prefer volatiles emitted from different combinations of castor bean plant extracts and a signaling female over a female alone. In the presence of castor bean plants copulation rates of H. parallela were highest among all test environments both in laboratory bioassays (60%) and in field tests (70%). This study, combined with our previous observation of the feeding behavior of H. parallela adults on castor bean leaves, suggests that castor bean plants may provide an attractive but risky mating site for H. parallela beetles. The enhancement of male mate-location and copulation rate in the presence of castor bean plants can balance its paralytic effects on H. parallela after intake of potential toxins contained in its leaves.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of the Australian Ceramic Society
·
2018
·Vol. 55
·期 1
·71-76
·
IF 0.587
Du Xiaoni,Liu Yang,Wang Xiaohong,Feng Jingqing,Ren Chaofei
α-Bi 2 O 3 and β-Bi 2 O 3 nanoparticles were selectively synthesized via one-step solution combustion synthesis (SCS) using bismuth nitrate (Bi(NO 3 ) 3 ·5H 2 O) as the oxidant and tartaric acid (C 4 H 6 O 6 ) as the fuel, and α/β-Bi 2 O 3 heterojunction was rapidly prepared by treating SCS β-Bi 2 O 3 powders with NaOH solution. The physical and chemical properties of as-prepared samples were characterized by XRD, SEM, TEM, PL, and UV-vis techniques. The formation of α/β-Bi 2 O 3 heterojunction can be proven by TEM, UV-vis diffuse reflectance spectra, and PL spectra results. The band gap energies of α-Bi 2 O 3 , β-Bi 2 O 3 , and α/β-Bi 2 O 3 measured by UV-vis diffuse reflectance spectra were estimated to be about 2.9, 2.48, and 2.7 eV, respectively. The PL spectra of α/β-Bi 2 O 3 heterojunction showed higher efficiency of charge separation and transfer across the α–β phase junction than those of α-Bi 2 O 3 and β-Bi 2 O 3 , leading to the enhancement of photocatalytic activity. The synthesized α/β-Bi 2 O 3 heterojunction can degrade 86% of rhodamin B (RhB) after 180 min under visible-light irradiation, better than those of pure α-Bi 2 O 3 (24%, 180 min) and pure β-Bi 2 O 3 (60%, 180 min). Consequently, α/β-Bi 2 O 3 heterojunction is a promising photocatalyst, which can be easily prepared by SCS and post-treatment of NaOH solution.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2019
·Vol. 186
·期 8
·1-8
·
IF 5.479
Song Xiaolei,Wang Yu,Liu Su,Zhang Xue,Wang Jingfeng,Wang Haiwang,Zhang Fenfen,Yu Jinghua,Huang Jiadong
An amplified electrochemical biosensing scheme is described for lead(II) ions. It is making use of DNAzyme-assisted target recycling and catalytic hairpin assembly (CHA). The hairpin strand (substrate probe for the Pb 2+ -based DNAzyme; referred to as SP) is composed of trigger probe (TP) and a capture probe 1 attached to gold nanoparticles (AuNP). In the presence of the enzyme probe that partially hybridizes with SP, the introduction of Pb 2+ triggers target recycling and drives the highly amplified translation of target Pb(II) to TP. The CHA reaction is further initiated by TP. The modified AuNP act as the connecting unit, and this leads to the formation of a 3D DNA-AuNP network on the electrode (which is the third amplification step). It can bind the positively charged redox mediator RuHex via electrostatic interaction for electrochemical detection. This biosensor has a low detection limit (95 pM) and any analytical range that covers the 100 pM to 5 μM Pb(II) concentration range. It is selective over other divalent metal ions. It was applied to the determination of Pb 2+ in spiked real-world samples.
Schematic presentation of the electrochemical biosensor. The triply amplified electrochemical assay is based on the use of DNAzyme-assisted target recycling with catalytic hairpin assembly (CHA) reaction for sensitive and selective determination of lead ion (Pb 2+ ). AuNP: gold nanoparticles; SP: substrate probe; EP: enzyme probe.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2019
·Vol. 125
·期 8
·1-15
·
IF 1.784
Yang Lu,Sun Zhuangzhi,Li Fei,Du Shanqi,Song Wenlong
To enhance the performance of ionic actuators, the electrochemical and electromechanical properties of green ionic actuators with the electrolyte layer after doping with MWCNT was investigated in this paper. The surface morphology, elemental composition, corresponding content and functional group of the mixed electrolyte layer were observed and characterized by SEM–EDS, FT-IR and XRD. The CV test showed that when the doping amount was 0.8 wt%, the specific capacitance increases 187.6% and 205.3% compared with undoped electrolyte layer at the sweep speed of 20 mV s −1 ,500 mV s −1 , respectively. The GCD test showed that the energy density increased to 144.3% at the current density of 1 A g −1 . and the cycle life is correspondingly increased. At 5 V DC, the deflection displacement of actuators was 10.12 mm when the doping amount was 0.8 wt%, which was 238.1% higher than when the doping amount was 1.5 wt%. And the output force of actuators was 3.10 mN, which was 147.2% higher than when the doping amount was 0 wt%. At 5 V/0.05 Hz voltage, the peak displacement of the actuator was 2.871 mm, which was 238.1% higher than when the doping amount was 1.5 wt%.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2019
·Vol. 26
·期 13
·8153-8164
·
IF 3.917
Yang Maiping,Liu Weiqu,Jiang Chi,Xie Yankun,Shi Hongyi,Zhang Fengyuan
Abstract Self-cleaning, photocatalysis and UV shielding cotton fabric was fabricated through a mild, facile and efficient method via ZnO/polydimethylsiloxane coatings. No fluorinated materials were employed during the preparation process. The modified cotton presented a high superhydrophobicity, with a water contact angle of 160.4° and water shedding angle of 6.0°. The SEM, EDS and XPS tests were used to investigate the differences of microstructures and chemical compositions of fabrics before and after coating. The robustness of the coated fabric was demonstrated in many aspects, such as immersing in acid and basic solutions, different organic solvents and abrasion test. In addition, the as-prepared superhydrophobic surface displayed excellent self-cleaning due to the synthesis function of superhydrophobicity and photocatalysis. The UV durability and UV shielding characteristics were also investigated. These properties promote the multifunctional cotton fabric as a satisfied candidate in various promising fields. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
·
2019
·Vol. 139
·期 3
·1931-1939
·
IF 2.471
Qu Dezhi,Gao Hongwei,Wang Qiuxia,Bai Yongping,Li Ning
Crystallization kinetics are very important for polymeric materials due to the fact that they determine the final degree of crystallinity and the morphology of the final product after processing. The kinetic of non-isothermal crystallization of poly(butylene-co-isosorbide succinate) (PBIS) was investigated using differential scanning calorimetry. Ozawa, Jeziorny and Mo methods were used to describe the non-isothermal crystallization process of PBIS. Both the Ozawa constant and the Avrami constant were obtained by Ozawa method and Jeziorny method, respectively. The crystallization activation energy (∆ E ) for non-isothermal crystallization process of PBIS, analyze based on the differential isoconversional method of Friedman and Kissinger, was found to increase with the relative crystallinity.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS AND STRUCTURES
·
2019
·Vol. 52
·期 4
·1-11
·
IF 2.548
Si Jingjing,Li Yang,Yu Xin
Cold-mixed epoxy asphalt (CEA) is an eco-friendly material for steel bridge deck pavements. The effects of the asphalt on the curing behavior and mechanical properties of the CEA were studied. The pot life, curing characteristics, and curing kinetics of CEA blends were investigated by rotational viscosity testing, dynamic shear rheological analysis, and fluorescence microscopy. The results showed that the CEA pot life increased with asphalt content, and the curing apparent activation energy \( E_{k} \) of CEA-0.4 was more than two times higher than that of the epoxy resin. The curing reaction between the epoxy resin and curing agent was hindered by the asphalt. According to the FTIR and DSC results, the curing degree of the CEAs decreased with asphalt content. The elongation at break of the CEAs increased, while the tensile and adhesion strength decreased with asphalt content.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2019
·Vol. 411
·期 21
·5415-5422
·
IF 3.286
Yu Siyang,Yan Chunfang,Hu Xianqiao,He Baoqi,Jiang Yan,He Qiaohong
Isoelectric focusing (IEF), a powerful technique for protein separation and enrichment, was successfully integrated into microfluidic paper-based analytical devices (μPADs) in this work. The μPADs for isoelectric focusing were fabricated by octadecyltrichlorosilane (OTS) silanization and subsequent region-selective plasma treatment. The system of IEF on μPADs could be easily assembled. And a series of conditions of the system were investigated, including the suitable concentration of ampholyte to create good pH gradient, the effect of polyvinylpyrrolidone (PVP) on electroosmotic flow (EOF) suppression, and focusing voltage applied on the paper channel. After optimization, simultaneous separation and enrichment of protein sample containing myoglobin and cytochrome C was successfully demonstrated. Besides, parallel IEF on multichannels were also achieved for the separation of multiple protein samples on one single chip, and their performance was compared with that of the conventional gel-IEF system. The developed IEF on μPADs exhibits appealing features such as low cost, simplicity, and disposability and are believed to have great application potentials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTRONIC MATERIALS
·
2019
·Vol. 48
·期 10
·6397-6405
·
IF 1.676
Yang Mengru,Shi Yonghong,Li Yuangang,Li Huajing,Luo Ningdan,Li Jin,Fan Jing,Zhou Anning
Abstract 2D Bi 2 S 3 /CdS nanosheet arrays have been constructed by a simple three-step method. Firstly, BiOI nanosheet arrays have been electrochemically grown on the surface of conductive FTO substrate and then converted into Bi 2 S 3 nanosheet arrays by ion exchange. Finally, CdS was hydrothermally deposited onto the surface of Bi 2 S 3 nanosheet arrays to form hybrid Bi 2 S 3 /CdS nanosheet arrays. The obtained hybrid heterojunction arrays have been used as photoanodes for photoelectrochemical hydrogen evolution and showed enhanced performance and prolonged stability. The photocurrent density of the elegant Bi 2 S 3 /CdS nanosheet arrays reaches 9.48 mA/cm 2 at 1.23 V RHE under an illumination of 100 mW/cm 2 from AM 1.5G sun simulator, which is more than ten times higher than that of the pure Bi 2 S 3 nanosheet arrays and the photocurrent density does not decline obviously after 4 h of continuous operation. Ultimately, a rational mechanism is proposed to elucidate the high performance and excellent stability of Bi 2 S 3 /CdS nanosheet arrays for photoelectrochemical cells. Graphic Abstract To obtain nanosheet arrays : Arrays of Bi 2 S 3 /CdS nanosheets on a FTO substrate are synthesized by electrodeposition, ion exchange and hydrothermal process. The Bi 2 S 3 /CdS nanosheet photoanodes show better photoactive and photostability compared to bare Bi 2 S 3 (CdS) nanosheets for photoelectrochemical splitting of water.
✓ 已验证
产品关联
DOI
高影响因子