文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3853至3864个,产品总数4,590个

切换升序
C
ACS Catalysis · 2022 · IF 13.7

Aerobic Oxidation of 5-Hydroxymethyl-furfural to 2,5-Furandicarboxylic Acid at 20 °C by Optimizing Adsorption on AgPd Alloy Nanoparticle Catalysts

Yichao Jin,Sarina Sarina,Hongwei Liu,Wayde Martens,Eric R. Waclawik,Erandi Peiris,Jianfeng Jia,Jing Shang,Liangzhi Kou,Cheng Guo,Huai-Yong Zhu

Production of 2,5-furandicarboxylic acid (FDCA, a platform chemical for the chemical industry in the future) by the selective aerobic oxidation of 5-hydroxymethyl-furfural is a crucial component to enable the FDCA production from sugars. The challenge is to achieve a high FDCA yield at low temperatures. Here, we report a catalyst composed of alloyed nanoparticles (containing 1.5 wt % Ag and 1.5 wt % Pd) supported on CeO2 nanofibers, which achieved an excellent FDCA yield (93%) at 20 °C. Interesting observations include yield deterioration at higher reaction temperatures; water is the source of the oxygen atom(s) added to the oxidized intermediates and product, while O2 molecules adsorbed onto the catalyst scavenge electrons, yielding OH• radicals from OH– ions in the reaction system to drive the oxidation. At 20 °C, we avoid side reactions, but there is no external energy provided for overcoming the activation barriers. The barriers for activating the alcohol groups are significant. We find that the appropriate chemisorption on the catalyst is critical for a high FDCA yield. By tuning the Ag/Pd ratio, we attained the most catalytically active sites, bimetallic surface sites, at the boundaries between Ag and Pd clusters. The chemisorption at these sites is strong enough to cause the selective oxidation of both the aldehyde and alcohol groups in HMF at 20 °C, avoiding side reactions at high temperatures. The knowledge acquired from this study is expected to have implications for other catalytic systems where competitive reactions proceed.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2021 · IF 5.316

Fe–Nx–C sites decorated porous carbon nanorods with huge specific surface area boost oxygen reduction catalysis for Zn-air batteries

Lei Cao,Maliang Zhang,Kunmei Su,Feng Gu,Zhenhuan Li

Decorating porous carbon nanomaterials with rich homodispersed metal cluster and heteroatoms can effectively shorten the diffusion pathway of oxygen and expose more active sites, thereby promoting oxygen reduction reaction (ORR). Herein, hierarchical porous carbon nanorods with homodispersed Fe–N x –C active sites are obtained by calcination , etching and ammonia activation of Fe-nitrogenous acid (NTA) coordination polymer nanowires. The obtained Fe-PCNRs-700 as ORR catalysts show the excellent activity with half wave potential (E 1/2 ) of 0.71 V vs. reversible hydrogen electrode (RHE) in 0.5 M H 2 SO 4 and 0.87 V vs. RHE in 0.1 M KOH electrolyte, which owe to its huge specific surface area (1652 m 2 g −1 ), hierarchical pore structure , homodispersed Fe–N x –C active sites and structural defects. Furthermore, using Fe-PCNRs-700 as a cathode catalyst in both liquid and flexible solid Zn-air batteries, and the assembled liquid batteries display the high power density of 161 mW cm −2 and robust charge/discharge stability of 116 h.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2021 ·Vol. 10 ·期 1 ·266-287 · IF 12.732

Understanding the high performance of PdSn–TaN(tantalum nitride)/C electrocatalysts for the methanol oxidation reaction: coupling nitrides and oxophilic elements

Na Ye,Pengcheng Zhao,Xiaoying Qi,Wenchao Sheng,Zhao Jiang,Tao Fang

Core–shell like PdSn–TaN(tantalum nitride)/C catalysts with tunable oxophilicity were prepared through a surfactant-free solvothermal method. Optimized Pd1Sn3–TaN/C exhibited good activity (3293.46 A gPd−1, 15.6 times that of commercial Pd/C), stability and tolerance to COad-like species towards the methanol oxidation reaction (MOR) in alkaline media, which can be ascribed to the interfacial structures and bi-functional effects. Briefly, the core–shell like structure can provide an effective Pd–TaN/C interface related to the large ECSA, and the introduction of Sn can further synergistically modulate the interfacial electronic structures, thereby significantly promoting the MOR performances, as revealed by HRTEM, XPS and electrochemical results. Furthermore, in situ ATR-SEIRAS (attenuated total reflection-surface enhanced infrared absorption spectroscopy) measurements displayed that PdSn–TaN/C went through the dual-channel pathways including a large amount of HCOOad and a small amount of COad towards MOR in alkaline medium, which is different from the single COad pathway on commercial Pd/C. Density functional theory (DFT) calculations indicated that the coadsorption intensity and amount of OH provided a chance for CO conversion into CO2 on Pd4–SnO2/TaN(001). Compared to Pd(111), the CO binding energy was evidently reduced on Pd4–SnO2/TaN(001). Meanwhile, Pd1Sn3–TaN/C also showed high mass activity towards the formic acid oxidation reaction (FAOR) in acidic media, which further confirmed that Pd1Sn3–TaN/C may be a promising bi-functional electrocatalyst with high efficiency.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMOSPHERE · 2022 · IF 8.943

Efficient degradation of organic pollutants by activated peroxymonosulfate over TiO2@C decorated Mg–Fe layered double oxides: Degradation pathways and mechanism

Qian Zhong,Jin Liu,Junting Wang,Yuan Li,Jun Li,Gaoke Zhang

To activate peroxymonosulfate (PMS) is an efficient way for decomposition of non-biodegradable organic pollutants. Herein, Mg–Fe layered double oxides decorated with Ti 3 C 2 MXene-derived TiO 2 @C (T/LDOs) were fabricated to efficiently activate PMS for the degradation of Rhodamine B (RhB), acid red 1 (AR1), methylene blue (MB), and tetracycline hydrochloride (TC). The T/LDOs catalyst could decompose 95.8% of RhB, 94.8% of AR1, 84.9% of MB within 10 min, and 82.4% of TC within 60 min. The degradation rate constant of RhB in the optimal T/LDOs/PMS system was approximately 2.5 and 15.7 times higher than that in the Mg–Fe LDOs/PMS system and Mg–Fe LDH/PMS system, respectively. Importantly, the T/LDOs exhibited a wide working pH range (3.1–11.0) and high stability with low metal ions leaching, indicating its potential practical applications. Quenching experiments and electronic spin resonance results confirmed that both • O 2 − and 1 O 2 were the dominant active species in the T/LDOs/PMS system. In addition, the possible degradation pathway of RhB in the 5%-T/LDOs/PMS system was proposed. Finally, the catalytic mechanism study revealed that the T/LDOs with abundant surface hydroxyl groups and a certain amount of TiO 2 @C facilitated the electron transfer between ≡Fe (Ⅲ) ‒OH complex and HSO 5 − , boosting the generation of • O 2 − and 1 O 2 . This study provides an insight into exploiting highly efficient catalysts for PMS activation towards the degradation of organic pollutants.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
DYES AND PIGMENTS · 2016 · IF 4.055

Synthesis and photovoltaic performance of the porphyrin based sensitizers with 2H-[1,2,3]triazolo[4,5-c]pyridine and benzotriazole as auxiliary acceptors

Hao-Liang Cheng,Zu-Sheng Huang,Lingyun Wang,Herbert Meier,Derong Cao

Two novel zinc porphyrin dyes containing either benzotriazole or 2 H -[1,2,3]triazolo[4,5- c ]pyridine as auxiliary acceptors, respectively, were synthesized for dye-sensitized solar cells. These two auxiliary acceptors were firstly applied into porphyrin based dyes. The photophysical and electrochemical properties of the dyes were investigated. These two dyes show the whole visible light absorption when they are adsorbed on the TiO 2 film, which means that they are promising sensitizers for dye-sensitized solar cells. The absorption intensity of the triazolopyridine containing dye is higher than that of the benzotriazole containing dye, resulting in a better light harvesting. Thus, the dye-sensitized solar cell based on the former dye achieved higher conversion efficiency of 6.65% than the cell based on the latter dye (6.17%) with chenodeoxycholic acid as the coadsorbant.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CARBON · 2023 · IF 10.9

Integrating large specific surface area and tunable magnetic loss in Fe@C composites for lightweight and high-efficiency electromagnetic wave absorption

Yujie Ren,Yinghan Zhang,Qi Zheng,Lianjun Wang,Wan Jiang

Porous Carbon-based composites with large specific surface area are promising as lightweight electromagnetic wave (EMW) absorbers due to their inherently rich interfaces that facilitate microwave attenuation. However, the exertion of the intrinsic advantage of large surface area was underexplored. Herein, we described a facile strategy using MOF-derived large surface area porous carbon to construct dielectric-magnetic composites for high-efficiency EMW absorbers. In particular, a series of Fe@C composites were fabricated by pyrolysis of MOF-5 to form porous carbon matrix (S BET  ∼ 1800 m 2 /g), followed by ferrocene deposition and reduction. By altering Fe species amount, surface area and electromagnetic parameters of the composites were tuned. It is found Fe@C-0.6 composites with sufficiently high S BET ∼915.8 m 2 /g exhibited outstanding microwave absorption performance with the minimum reflection loss (RL min ) of −64.6 dB (1.98 mm thickness and 15 wt% loading) and the effective absorption bandwidth (EAB) up to 6.27 GHz (2.2 mm thickness). Besides, Fe@C-1 (S BET ∼820.1 m 2 /g) also achieved desirable loss capability, with EAB covering the whole Ku band . This work demonstrates the potential of high surface area to achieve optimal EMW attenuation, and may provide a facile alternative to develop more high-performance carbon composites for EMW absorption application.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
NANOTECHNOLOGY · 2019 ·Vol. 30 ·期 33 ·335701 · IF 3.399

A composite of Fe3O4@C and multilevel porous carbon as high-rate and long-life anode materials for lithium ion batteries

Fei Wang,Chuqing Wang,Hong Chen,Wenlong Zhang,Rujia Jiang,Zhanheng Yan,Zhongyuan Huang,Haihui Zhou,Yafei Kuang

The iron oxide-based anode materials are widely studied and reported due to their abundance, low cost, high energy density and environmental friendliness for lithium ion batteries (LIBs). However, the application of LIBs is always limited by the poor rate capability and stability. In order to tackle these issues, a novel material with carbon-encapsulated Fe3O4 nanorods stuck together by multilevel porous carbon (Fe3O4@C/PC) is prepared through directly carbonizing the Fe-based metal-organic framework under a nitrogen atmosphere. This novel material shows a high specific capacity and rate performance. The initial specific capacity can reach 1789 mAh g−1 at a current density of 0.1 A g−1, and the specific capacity still remains 1105.3 mAh g−1 and 783.5 mAh g−1 after 150 cycles at the current densities of 0.1 A g−1 and 1 A g−1, respectively. Even under a current density as high as 12 A g−1, the specific capacity can achieve 309 mAh g−1 after 2000 cycles with an average attenuation rate of 0.019% per cycle. Overall, the simple strategy, low cost and high capacity can make the practical application possible.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2022 · IF 9.794

Regulating charge/ion transfer kinetic behavior via embedded TiOX in hierarchical TiOX/SiOX@C with optimal expansion stress for lithium storage

Jiawei Ge,Tao Guo,Honglie Shen,Fei Zhou,Yufang Li,Ningyi Yuan,Wangyang Yang,Zehui Wang,Yajun Xu,Jinzhe Zhang,Yimin A. Wu

The charge/ion transfer and structural stability of silicon suboxide (SiO X ) for lithium-ion batteries (LIBs) are plaguing. Titanate oxide (TiO 2 ) shows zero strain and high ion diffusion for lithiation , promising for improving its electrochemical properties . Herein, hybrid TiO X /SiO X @C (local reduction of TiO 2 for TiO X ) was prepared via magnesiothermic reaction and self-assembled as hierarchical microspheres . The embedded TiO X and hierarchical structures buffer the volume-expansion-induced strain of TiO X /SiO X @C for high structural integrity. Oxygen-vacancy sites around Ti and Si atoms for charge transfer tunnel and the heterostructure for fast interfacial charge response improve its electronic conductivity . The introduction of locally reduced Ti atoms alters oxygen structural dispersion, further reducing Li diffusion barriers . Even, the inevitable crack of TiO X /SiO X induces its exposure to the electrolyte, facilitating a compact solid electrolyte interphase layer for stable electrochemical performance. Thus, its open-circuit voltage curve displays a low lithiation platform due to its low polarization for Si-based anodes. These synergetic findings deliver the optimal TiO X /SiO X @C with high cycling stability (951.6 mAh g −1 at 1A g −1 after 1000 cycles with a capacity retention of ∼87.7%) and superb rate capability (516.5 mAh g −1 at 4 A g −1 ). This work provides a deep understanding of charge/ion kinetics for SiO X -based anodes of LIBs.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Catalysis Science & Technology · 2022 ·Vol. 12 ·期 9 ·2903-2911 · IF 6.177

Molybdenum carbide anchored on glucose-derived carbon (β-Mo2C@C) as a bifunctional catalyst for conversion of fructose to 2,5-diformylfuran

Zhenzhen Yang,Yuhan He,Pengfei Tang,Bangchong Zhu,Genlei Zhang,Jianbo He

Direct conversion of biomass-based fructose to 2,5-diformylfuran (DFF) has attracted much attention in recent years. In this study, molybdenum carbide anchored on glucose-derived carbon (β-Mo2C@C) was synthesized by a simple, green and economical method and was found to be highly active for production of DFF from 5-hydromethylfurfural (HMF) and fructose. DFF was obtained with high yields of 94.5% and 76.0% from aerobic oxidation of HMF and “one-pot” conversion of fructose under optimal reaction conditions, respectively. A probable mechanism involving Mo6+/Mo2+ redox cycles was proposed for β-Mo2C@C-catalyzed oxidation of HMF to DFF according to the experimental and characterization results. Furthermore, the β-Mo2C@C catalyst can be reused without much loss of catalytic activity, suggesting that β-Mo2C@C is highly stable.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2016 ·Vol. 4 ·期 17 ·6630-6638 · IF 8.262

Ionic liquid-derived Fe–N/C catalysts for highly efficient oxygen reduction reaction without any supports, templates, or multi-step pyrolysis

Fei He,Xinghua Chen,Yanfei Shen,Ying Li,Anran Liu,Songqin Liu,Toshiyuki Mori,Yuanjian Zhang

The development of efficient and low-cost non-precious-metal electrocatalysts such as Fe–N/C for the oxygen reduction reaction (ORR) is crucial for fuel cells and metal–air batteries. Here, we report a class of highly efficient Fe–N/C electrocatalysts derived from versatile imidazolium-based ionic liquids (ILs) with a halogen-coordinated iron anion. Without any supports, templates, or multi-step pyrolysis, the as-prepared Fe–N/C catalysts exhibited superior activity in the ORR to the state-of-the-art Pt/C in alkaline electrolytes by 44 mV in half-wave potential. More interestingly, owing to the versatile configuration of the imidazolium-based IL precursors, a diverse range of catalyst structures was successfully modulated. Based on this, it was clearly revealed that the electrical conductivity, type/amount of N dopants, and “effective porosity” (not the conventional total surface area) jointly determined the electrocatalytic activity. A pivotal radar chart is further proposed to successfully predict activity in the ORR merely from the structures of Fe–N/C catalysts. The proposed ILs platform would provide a valuable toolbox for the molecular design of precursors to tune the structures of Fe–N/C electrocatalysts towards excellent activity in the ORR in a highly flexible manner, and facilitate the long-term challenging study of relationships between processing, structure and activity.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

High-valence metal engineered trimetallic organic framework derived S, C co-doped FeNiCeP nanospheres for proficient self-powered overall water splitting

Qianqian Wang,Xiaoyan Ma,Wei You,Pengcheng Ma,Ran Bi,Senyang Song,Fang Chen,Fengjin Qu,Xinli Wang,Pengfei Liu

The construction of cost-effective and high-performance metal organic framework (MOF) derived metal phosphides as multifunctional electrode materials for self-powered overall water splitting (OWS) is considerable promising. Herein, the trimetallic phosphides embedded in sulfur-containing carbon matrix (SC-FeNiCeP/NF) derived from high-valence metal engineered MOF are grown on nickel foam by hydrothermal and chemical vapor deposition for achieving self-powered OWS. Based on the electron coupling between the metal phosphide interface by high-valent Ce as “electronic storage” to accelerate electron transfer, the SC-FeNiCeP/NF as electrocatalysts present low overpotential with 208 mV and 107 mV at 10 mA cm −2 in oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. For supercapacitor, the SC-FeNiCeP/NF nanoarray exhibits high specific capacitance with 2290 F g −1 at 1 A g −1 . Combined with excellent SC-FeNiCeP/NF-based asymmetric supercapacitor (ASC) and OWS devices, the self-powered OWS are assembled to produce H 2 and O 2 simultaneously in alkaline water for up to ∼ 120 s, creating new possibilities for the energy storage and conversion systems based on the designable and multifunctional MOF-derived materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2021 · IF 13.273

Efficient generation of singlet oxygen (1O2) by hollow amorphous Co/C composites for selective degradation of oxytetracycline via Fenton-like process

Peidong Hong,Zijian Wu,Dandan Yang,Kaisheng Zhang,Junyong He,Yulian Li,Chao Xie,Wu Yang,Ya Yang,Lingtao Kong,Jinhuai Liu

Singlet oxygen ( 1 O 2 ) is an electrophilic species that has great selectivity for breaking down electron-rich refractory organic pollutants. However, in most cases, 1 O 2 plays a minor role in the Fenton-like process due to its low yield, the contributions of which are usually covered by free radicals. Here, we provide the first report on a type of hollow amorphous Co/C composites prepared for the efficient generation of 1 O 2 to degrade oxytetracycline (OTC) selectively in the Fenton-like system. The optimized Co/C samples (Co/C-3) obtained the best degradation performance of OTC near to 100% under neutral conditions, along with satisfactory reusability and stability. Additionally, it exhibited a high anti-interference capacity for inorganic anions and natural organic matter s in the different water qualities. XPS spectrum revealed that the electron cycle of ≡Co 2+ -O-C/H and ≡Co 3+ -O-C/H played a vital effect on the formation of 1 O 2 . Quenching experiments and EPR testing further verified that 1 O 2 converted from ·O 2 – was the dominant oxidative species, and no hydroxyl radical (·OH) appeared in this reaction. Moreover, the results of the Fukui function and T.E.S.T (Toxicity Estimation Software Tool) analysis provided significant assistance in the exploration of degradation pathways and ecological risks of OTC and its intermediates.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。