JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Mingyang Li,Wanlu Zhang,Xuewei Zhang,Yongfu Lian,Xiaoyu Niu,Yujun Zhu
Catalytic oxidation is considered as the most effective and economical method to remove low concentration volatile organic compounds (VOCs). Activation of oxygen to form active oxygen species on metal oxides catalyst plays a key role in the process. Three copper-manganese oxide catalysts with cubic Cu 1.5 Mn 1.5 O 4 phases were prepared by microwave heating (CM-MW), sol–gel (CM-SG) and co-precipitation (CM-CP) methods, and applied for the elimination of toluene and benzene as representative aromatic VOCs. These catalysts exhibit different catalytic oxidation performance due to their different physicochemical properties. Various characterizations were used to clarify the role of different oxygen species in the oxidation of VOCs, and the reaction pathway. In situ DRIFTS were carried out to explore the function of surface adsorbed oxygen, oxygen vacancy , and surface lattice oxygen in the catalytic oxidation of VOCs over three catalysts. Various types of intermediate species and detailed reaction pathways are also explored by combining in situ DRIFTS and mass spectrometry . Among these catalysts, CM-MW with nanosheet morphology shows the best catalytic oxidation performance of toluene and/or benzene with/without H 2 O due to the most abundant active oxygen species, and the highest oxygen vacancy concentration which is beneficial to activate oxygen. Meanwhile, toluene and benzene do not interfere with each other during the mixture oxidation. This study can provide new inspiration for rational design of metal oxide catalysts to remove VOCs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2022
·Vol. 19
·期 4
·2205735
·
IF 15.153
Qianqian Jia,Zhenguo An,Man Li,Ran Liu,Weixin Xiao,Jingjie Zhang
The construction of hollow metallic microspheres with rationally designed building blocks of the metal shell is a promising way to achieve low density and functionality control, but the microengineering of the metallic structures on a micrometer spherical surface is a great challenge. In the present work, a novel and simple calcination-induced aggregation strategy is developed to realize the distribution status and microstructure control of Co-Cu bimetal building blocks assembled on a hollow glass microsphere support, and thus a series of low-density (0.58 g cm −3 ) dual shell composite hollow microspheres are constructed with gradient in electromagnetic property depending on the calcination temperature (CT). The optimized microwave shielding performance can be achieved at a CT of 500 °C, while further increasing CT to 700 °C leads to an interesting conversion from microwave shielding to absorption with an optimized effective absorption bandwidth of 4.64 GHz at a low matching thickness of 1.33 mm. The mechanism underlying the CT-dependent metallic shell structure variation and further the decisive effect of the shell structure on the microwave response behavior are proposed based on a series of contrast experiments.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Frontiers in Chemistry
·
2022
·
IF 5.545
Zang Shuaipu,Zhang Xuhui,Sun Yingying,Li Ning,Wang Lei,Li Lin Song
Harnessing environment-friendly and low-cost multinary Cu-In-Zn-S quantum dots (QDs) as emitters for light-emitting diodes (LEDs) has attracted great attention for display and lighting application. However, suboptimal QD structure is a huge obstacle, which results in serious non-radiative recombination and efficiency roll-off. Herein, we synthesized structure-tailored Cu-In-Zn-S/ZnS//ZnS QDs by improving the reactivity of shell growth by 2-ethylhexanoic acid (EHA) ligands. The EHA-assisted shell growth can boost an extended alloyed layer at the core-shell interface and a smoothed confinement barrier, which effectively passivate the interface defects and suppress Förster resonance energy transfer (FRET) process. These synthesized QDs display a bright photoluminescence emission (quantum yield of 83%) and a larger size of 8.4 nm. Moreover, the resulting LEDs based on the EHA-assisted QDs exhibit a maximum luminance of 8074 cd/m2, and a current efficiency of 7.3 cd/A with a low efficiency roll-off. Our results highlight a remarkable ligand strategy to tailor the QD structure for high performance QD-based LEDs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYST
·
2022
·Vol. 147
·期 24
·5670-5679
·
IF 5.227
Ziyan Song,Siyu Chen,Qiushi He,Hu Liang,Guangyao Huang,Pan Li,Zongyao Hao,Liangbao Yang
The rapid and sensitive detection of ultra-trace marker molecules from biological samples is of great significance for the wide application of surface-enhanced Raman spectroscopy (SERS) methods in clinical diagnosis and disease monitoring. However, the cumbersome biological sample processing procedures and the poor enrichment of target analytes in hot spots hinder the practical applications of SERS methods. In this paper, we synthesized a novel floating SERS substrate by a simple one-step oxidation process, annealing and in situ chemical etching to form Ag-NPs@Cu-NW bundles on copper mesh (CM). In particular, under spontaneous bottom-up capillary action, the pressure difference at different nanogaps drives uric acid molecules to actively enter hot spots, so that the Ag-NPs@Cu-NW bundle nanostructure with the advantages of a light weight CM is capable of preventing the common coffee-ring effect and enhancing the spatial enrichment of analytes. Therefore, this SERS substrate realizes highly sensitive detection of uric acid at a level of 50 nM in pretreatment-free urine. Currently, this portable, flexible, simple, fast and cost-effective SERS substrate has great potential for early screening and clinical diagnosis of diseases in different biofluids.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2022
·Vol. 189
·期 3
·1-10
·
IF 6.408
Wang Lijun,Zhou Hong,Wu Xue,Song Yanfei,Huang Yukun,Yang Xiao,Chen Xianggui
A novel colorimetric aptasensor has been developed for highly sensitive tetracycline (TC) detection based on the peroxidase-like activity of Fe 3 O 4 @Cu nanoparticles and “sandwich” oligonucleotide hybridization. The Fe 3 O 4 @Cu nanoparticles with high peroxidase-like activity were successfully synthesized under mild conditions. Then, a “sandwich” oligonucleotide hybridization probe (a short amino-modified complementary sequence of a portion of the TC aptamer (cDNA1), TC aptamers, and a long complementary to 5′ terminal TC aptamer sequence (cDNA2)) was created in 96-wells plates via DNA hybridization in the absence of TC from the detection system. The unique “sandwich” oligonucleotide hybridization probe adsorbed large numbers of Fe 3 O 4 @Cu nanozymes while further enhancing its peroxidase-like activity. Based on the 3,3′,5,5′-tetramethylbenzidine (TMB)-hydrogen peroxide (H 2 O 2 ) reporting system, the blue color of the solution decreased linearly with the increase of TC concentration, ranging from 10 −3 to 10 3 μg/L with an ultralow limit of detection (LOD) of 0.91 ng/L (2 pM). The proposed method was successfully applied to detect TC in spiked milk samples, with recoveries of 81.8 to 112%, demonstrating the excellent potential for highly sensitive TC detection in milk. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Molecular Catalysis
·
2022
·
IF 5.089
Kuan Wang,Zhe Cao,Junlei Wang,Zhen-Hong He,Dan Wang,Rong-Rong Zhang,Weitao Wang,Yang Yang,Zhao-Tie Liu
The development of non-precious metal catalysts in heterogeneous catalytic processes is of great importance to the hydrogenation of quinolines for both theoretical and industrial applications. Herein, an effective non-precious metal catalyst, 58% Fe 4 Ni 6 Cu 5 /MCM-41, was developed to catalyze the hydrogenation of quinolines under the green and mild conditions, which can achieve 97.5% conversion and exceeding 98% selectivity to tetrahydroquinoline in solvent-free at low temperature of 50 °C. Moreover, the acceptable results of the reusability and gram scale-up experiments proved an industrial application potential of the as-prepared catalyst. Meanwhile, in cyclohexane system, 58% Fe 4 Ni 6 Cu 5 /MCM-41 catalyst can further realize a higher activity of the hydrogenation at a lower temperature of 40 °C, achieving 98.2% conversion and 98% selectivity to tetrahydroquinoline. The existence of Fe-Ni and Ni-Cu alloys in Fe 4 Ni 6 Cu 5 /MCM-41 catalyst was demonstrated by TEM, XRD, XPS, H 2 -TPD, and Raman spectroscopy. And, Fe-Ni and Ni-Cu alloys can be well dispersed onto MCM-41 molecular sieves. For Fe 4 Ni 6 Cu 5 /MCM-41 catalyst, quinoline molecules can be adsorbed by Fe 3+ species on the surface of Fe-Ni alloy through the coordination, while hydrogen molecules can be adsorbed and activated by Ni-Cu alloy. Under the synergism of Fe-Ni and Ni-Cu alloys, the highly effective and selective hydrogenation of quinolines was achieved at low temperature and in solvent-free system. The present approach offers a prospective idea for building non-precious metal catalysts to realize the effective hydrogenation of N-heterocyclic compounds under mild conditions.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Yunning Chen,Lu Yang,Yingnan Sun,Renquan Guan,Di Liu,Jie Zhao,Qingkun Shang
A CDs@Cu-HQCA/TiO 2 flower composite photocatalyst (CDs: carbon dots, HQCA : 8-hydroxyquinoline-5-carboxylic acid) was constructed by exploiting the synergy of complex-sensitization, TiO 2 -morphology control, and carbon dot-surface modification. The photocatalytic degradation of phenol, norfloxacin, tetrabromobisphenol A and Cr (VI) by Cu-HQCA/TiO 2 particle, tube, diamond and flower-like show that the Cu-HQCA complex effectively extends the visible light absorption range of composite photocatalysts, and the flower morphology of TiO 2 not only improves the adsorption of pollutants but also enhances the photoelectric response of the composite photocatalyst. In this manner, a CDs@Cu-HQCA/TiO 2 flower catalyst that demonstrates excellent performance for the removal of dexamethasone, which does not degrade well naturally, was prepared, which delivered a rate of degradation of 99.4% and a degree of mineralization of 77.4% for dexamethasone. Possible degradation sites and dexamethasone degradation products were studied by combining computational chemistry with high-resolution mass spectrometry, and a possible mechanism for photogenerated carrier transmission and separation in the CDs@Cu-HQCA/TiO 2 flowers is proposed.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2022
·
IF 6.556
Xiaobin Zhou,Mengjun Wang,Junyang Chen,Xingguang Su
Developing high-performance nanozyme for the construction of high-sensitivity biosensor platform is of great significance. Herein, we have designed and synthesized a Cu/N co-doped carbon-based nanozyme by anchoring Cu atoms on two-dimensional carbon nanosheet (Cu/NC NS). The Cu/NC NS possessed ultra-high Cu loading, superior peroxidase-like catalytic activity, great stability and reusability. Significantly, the Cu/NC NS exhibited high affinity towards H 2 O 2 and 3,3′,5,5′-tetramethylbenzidine (TMB) under acidic condition, which could induce obvious color changes of TMB in the presence of low H 2 O 2 concentration. By integrating the Cu/NC NS with β-galactosidase (β-Gal) and galactose oxidase (Gal Ox), a multienzyme cascade colorimetric sensing system was established for the detection of lactose and β-Gal, which realizing the assay of lactose and β-Gal in the linear ranges of 0.1–1.4 mM and 0.025–0.2 U/mL, respectively. And the limit of detection for lactose and β-Gal were 0.03 mM and 0.01 U/mL, respectively. Furthermore, this work achieved the accurate detection of the content of lactose in milk and the activity of β-Gal in human serum, exploiting a novel application for nanozyme in biosensing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2022
·
IF 9.224
Rui Guo,Dongdong Li,Rui Guan,Dechen Kong,Zheng Cui,Ziqi Zhou,Tianmin He
BaCeO3-based proton conductors have comparatively high-proton conductivity, but the low chemical stability and high sintering temperature seriously hinder their practical applications in protonic ceramic fuel cells. Herein, we demonstrate that this limitation can be conciliated by using a triple-doping strategy in a BaZr0.1Ce0.7Y0.2O3−δ (BZCY) electrolyte, where the triply doped BaCe0.7Sn0.1Dy0.15Cu0.05O3−δ (BCSDCu) exhibits better chemical stability and conductivity and lower sintering temperature compared with the pristine BZCY. The phase-pure BCSDCu can be obtained at the sintering temperature of 1100 °C prepared by solid-state reaction. The dense BCSDCu (>95%) is achieved at 1350 °C, which is significantly lower than the 1550 °C of BZCY. The BCSDCu presents competitive proton conductivity of 13.6 mS cm–1 under a moist H2 atmosphere at 600 °C. The anode-supported single cell with the BCSDCu (≈40 μm) as the electrolyte reaches the highest power density of 390 mW cm–2 at 600 °C. On the basis of the distribution of relaxation time analysis, we not only distinguish the contribution of grain and grain-boundary conductivities but also identify the rate-determining step of the single-cell performance. The protonic conductivities, mechanical properties, and impurity clean parts induced by grain size effects are discussed for the BCSDCu proton conductor.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Lili Gao,Langlang Qin,Haonan Wu,Xuelian Li,Kai Qi,Qun Yi,Jiandong Zhang,Lijuan Shi
Electrochemical reduction of CO 2 (CO 2 ER) to high value-added multicarbon (C 2+ ) is a viable way to promote carbon–neutral cycle. To date, copper (Cu) is reported as the most effective metal catalyst toward C 2+ , but it remains a challenge to achieve high selectivity and large current density. Incorporating ionic liquid in Cu-based catalysis has been proved an effective strategy, however, most reported methods are either involved too much ionic liquid (IL) as electrolyte or too complex & unstable. Herein, an ionic liquid-embedded Cu electrocatalyst (Cu-IL/GDL) was innovatively constructed through one-step electro-codeposition method, in which a kind of amino-ionic liquid, AFIL, was anchored to the gas diffusion layer (GDL) and embedded by the deposited Cu. Under the excellent synergy between Cu and AFIL, Cu-IL/GDL exhibits higher faradaic efficiency toward ethylene (C 2 H 4, 40.67%) and C 2 (C 2 H 4 and C 2 H 5 OH, 61.39%) when directing CO 2 to carbon-fiber side of electrode in H-cell. To be precise, more Cu (1 0 0) facet is stabilized by the capping effect of AFIL, being in favor for C–C coupling; meanwhile more AFIL + is embedded by the deposited Cu, making for the initiation of CO 2 ER. Thus, this paper proposes a facial and effective strategy to reinforce Cu (1 0 0) facet, and couple and heighten the virtues of ionic liquid and Cu during CO 2 ER toward C 2 .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2022
·
IF 14.224
Wenyang Fu,Zhongzheng Hu,Yingying Du,Pei Su,Yi Su,Qizhan Zhang,Minghua Zhou
The electrochemical reduction of nitrate to ammonia (ERNA) has become a green treatment technology for nitrate wastewater. However, strong adsorption for product caused high activation energy for product desorption in scaling relations, blocking activity of electrocatalyst in ERNA. Density functional theory (DFT) calculations indicated that constructing dual active sites (Cu and Co 3 O 4 ) could achieve strong adsorption of nitrate (−2.91 eV) with low desorbing energy barrier of ammonia (0.13 eV), breaking scaling relations. This dual active sites Co 3 O 4 /Cu electrode achieved a high ammonia yield rate of 684 µg mg cat − 1 h −1 with 94.6% faradic efficiency, surpassing single active site Co 3 O 4 and Cu electrodes. For mechanism, In-situ electrochemical characterization found the vital intermediates of *NH and *NH 2 , demonstrating that indirect reduction was the main pathway on Co 3 O 4 /Cu electrode. Thus, it is believed that building dual active sites on electrode is a reliable strategy to enhance ERNA for purifying industrial wastewater polluted by nitrate.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS CHARACTERIZATION
·
2022
·
IF 4.537
Shuang Liu,Limin Ma,Cheng Zhen,Yishu Wang,Dan Li,Fu Guo
In advanced microelectronic packaging technology, the interfacial brittleness of Cu/Sn solder joints puts forward higher requirements for high-performance diffusion barriers. Cobalt–Phosphorus (Co-P) alloy coating becomes ideal candidates for its good wettability and diffusion resistance. In this work, for Co-P with different crystallinity , the barrier properties of electrodeposited Co-P coatings as well as the mechanical properties of Co-Sn intermetallic compounds (IMCs) at the Co-P/Sn-Ag interface were investigated. According to the XRD results, the crystallinity of the Co-P coating was directly related to the phosphorus (P) content, and Co-P were classified into three types: crystalline state, mixed state and amorphous state. The morphology, composition, phase characterization, and mechanical properties of the Co-Sn IMCs at the interface were investigated by SEM , EPMA , TEM , and nanoindentation methods, respectively. After 180 °C aging test for 120 h, the thickness of CoSn 3 generated at the interface of crystalline Co-4.2 at.% P/Sn-Ag was the smallest among a total of 18 Co-P coatings, where P content ranged from 0.9 at.% to 20.8 at.%, showing the best barrier properties. The hardness of (Co,Cu)Sn 3 at the amorphous Co-P/Sn-Ag interface was the lowest (3.2 GPa), which was only 47% of that of Ni 3 Sn 4 , exhibiting the lowest brittleness tendency. The mixed crystalline-amorphous Co-P could greatly improve the diffusion barrier properties while sacrificing a small degree of brittleness comparing to the amorphous coatings, and had the potential to become a general-purpose alloy coating. This work could provide a scientific basis for the selection of Co-P barrier layers with excellent barrier properties and mechanical properties leading to different application scenario in electronic packaging.
✓ 已验证
产品关联
DOI
高影响因子