Separations
·
2025
·Vol. 12
·期 12
·342
·
IF 2.7
Guangjie Chen,Guangying Chen,Li Sze Lai,Zhiwei Zhang,Xiaodi Chen,Yun Hin Taufiq-Yap
Mixed amine/sulfolane (TMS) biphasic solutions have gained attention for their adjustable structure–activity relationships and lower regeneration energy. In this study, monoethanolamine (MEA) is employed as the main absorbent and polyamine as the co-absorbent, which are subsequently mixed with the phase separation promoter sulfolane (TMS) to form ternary biphasic solvent systems. Polyamine co-absorbents include 3-Dimethylaminopropylamine (DMAPA), 3-Diethylaminopropylamine (DEAPA), and Diethylenetriamine (DETA). Phase separation, absorption, and desorption performances were systematically studied. Reaction and phase separation mechanisms were elucidated through13C nuclear magnetic resonance (NMR) spectroscopy. The overall mass transfer coefficients (KG) were measured using a wetted wall column (WWC). Variations in the amine-to-sulfolane concentration ratio showed minimal impact on phase volume, while temperature and solvent composition significantly influenced phase separation behavior. All three solvents exhibited superior CO2capture performance, with CO2loadings in the rich phases ranging from 4.09 to 4.71 mol/L and over 96.82% of CO2concentrated in them, cyclic capacities reached or exceeded 3 mol/L, and regeneration energy consumption was 29.63–55.51% lower than 5 M MEA.13C NMR analysis indicated that multiple N atoms in polyamines promoted the formation of additional ionic species during CO2absorption, thereby enhancing phase separation completeness. Furthermore, KGvalues for the ternary systems exceeded that of conventional MEA, with the MEA/DEAPA/TMS system exhibiting a 1.7-fold increase. These findings demonstrated the industrial potential of MEA/polyamine/TMS biphasic solvents for efficient CO2capture.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·Vol. 14
·期 1
·120911
·
IF 7.2
Yong Xiang,Daoyong Yu,Yi Zhao,Rujing Guo,Jialin Chen,Baosheng Ge,Zijun Xiao
To address the limitations of synthetic zinc porphyrins (ZnP)—including high hydrophobicity, synthesis cost, and poor reusability—as carbonic anhydrase (CA) mimics, this study utilized chlorophyll a -rich Arthrospira platensis algal powder to synthesize hydrophilic zinc and copper chlorophyllin trisodium salts (Zn/Cu-E6–3Na). These derivatives preserve the metal-porphyrin catalytic center while incorporating three carboxylic groups, significantly improving water solubility. To enhance stability and recyclability, ZIF-8 was employed as a carrier to immobilize the Zn/Cu-E6–3Na via coordination, forming Zn/Cu-E6–3Na@ZIF-8 composites. Characterization confirmed anchoring through dual interactions involving both the central metal ion and carboxyl groups, which also improved the hydrophilicity of ZIF-8. The composites considerably enhanced CO 2 absorption within a potassium carbonate system. Esterase activity assays demonstrated a synergistic effect, with Zn- and Cu-composites reaching 0.14 U and 0.13 U, respectively, outperforming individual components. Furthermore, the composites retained over 62 % of their initial activity after multiple cycles without significant metal leaching, indicating excellent operational stability. This work presents a new approach for CO 2 capture using functional chlorophyll derivatives and proposes an innovative strategy for high-value biomass utilization.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Xiangyu Li,Mengyuan Yu,Ying Han,Ning Fu,Lian Qin,Jie He,Zhongli Zhao,Guixiang Teng,Chun Zhang
Guided by the principles of active site exposure and electron transport kinetics, we innovatively constructed a porous carbon sphere photocatalyst loaded with sulfur-deficient bimetallic sulfides C/Sv-CuIn 5 S 8 through a high-temperature calcination-induced vacancy strategy. By constructing a triple platform that integrates a hollow carbon sphere substrate, a bimetallic synergistic effect, and controllable sulfur defect states, the catalyst maximizes the efficiency of the entire CO 2 adsorption-activation-conversion chain, thereby exhibiting exceptional photocatalytic activity. Compared with pure CuIn 5 S 8 , the CH 4 and C 2 H 6 production in C/Sv-CuIn 5 S 8 increased significantly from 17.2 ± 0.5 μmol g −1 and 7.9 ± 0.5 μmol g −1 to 74.7 ± 0.4 μmol g −1 and 28.4 ± 0.6 μmol g −1 , with the increase rates reaching 4.4 times and 3.6 times respectively, while also possessing superior stability (activity retention >90 % after 6 cycles). In-situ infrared spectroscopy and density functional theory calculations have elucidated its reaction mechanism, revealing that sulfur vacancies alter the reaction pathway: On C/Sv-CuIn 5 S 8 , the formation of the key intermediate HCOO* is nearly spontaneous with an energy barrier of −0.63 eV, thereby effectively suppressing the generation of CO. it is further inferred that the formation of C 2 H 6 originates from the C C coupling of two CH 3 intermediates, while some of the uncoupled *CH 3 are protonated, leading to the high yield of CH 4 . This study provides a reference for the application of bimetallic sulfide carbon-based composite materials in the photocatalytic reduction of CO 2 .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2025
·
IF 9.5
Li-Yuan Wu,Fei Zhang,Ming-Zhe Cai,Min Zhang,Tong-Bu Lu,Ping Li,Yong-Hua Chen
Z-Scheme heterojunctions with strong redox capability and efficient photoinduced carrier separation are critical for sunlight-driven CO2 conversion, yet their optimal structural arrangement remains to be improved. Herein, we report a 2D/2D CsPbBr3/SnS2 nanosheet hybrid system featuring an extensive interfacial contact area that facilitates photoinduced carrier transfer. The inbuilt electric field directs photoinduced electrons to accumulate on CsPbBr3, while holes migrate to SnS2, thereby enhancing their respective redox capabilities. This system achieves a maximum CO rate of 75.6 µmol g−1 h−1, representing a 32.8-fold and 3.5-fold improvement compared to pristine 2D SnS2 and CsPbBr3–OA, respectively. Electrochemical characterization reveals that interlayer hybridization synergistically enhances both interfacial carrier transfer and surface redox ability. The electrostatic assembly approach enables the controlled synthesis of various CsPbBr3/SnS2 composites with tunable SnS2 ratios, providing a generalizable strategy for the precise fabrication of dual crystal facet-exposed catalysts.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2025
·
IF 7.3
Tianzi Bi,Yuxuan Wei,Jiabin You,Guiru Zhang,Yongjian Su,Xiaojing Cheng,Xiaohui Yan,Huiyuan Li,Shuiyun Shen,Junliang Zhang
Cobalt phthalocyanine (CoPc) is a widely utilized molecular catalyst for converting CO2 to CO in the CO2 reduction reaction (CO2RR). However, achieving high selectivity at high current densities remains significant challenges, such as mass transport and interfacial microenvironment. In this study, CoPc-based gas diffusion electrodes with thermal induction treatments are investigated to reach high performance and stability. At a current density of 300 mA/cm2, the cell voltage is 2.9 V, with a CO selectivity of 95%, representing nearly a 5-fold improvement compared to the pristine electrode. Additionally, at a current density of 150 mA/cm2, the electrode demonstrates long-term durability, maintaining stable performance for 45 h. The structural changes and underlying mechanisms of the Nafion ionomer induced by thermal treatment are investigated via microscopic characterization and molecular dynamics simulations. It is revealed that thermal induction at temperatures slightly above Nafion’s glass transition point could enhance ionomer phase separation, resulting in the formation of additional hydrophilic–hydrophobic interfaces that facilitate CO2 mass transport. Moreover, the rearrangement of Nafion chains during thermal induction produces a denser structure that restricts OH– release. This localized retention of OH– raises the pH near the catalyst, thereby improving the efficiency of the CO2RR. This work offers valuable insights into the design of CoPc-based gas diffusion electrodes with high selectivity at elevated current densities and provides guidance for post-treatment processes in the field of CO2RR.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Xiaoyu Li,Yanrong Zhao,Haiyang Xue,Chenyu Wang,Zheng Zhou,Kang Peng
Supported solid adsorbents are promising candidates for sustainable CO 2 capture. How to further improve their long-term cyclic stability over multiple adsorption–desorption cycles is still challenging work. Since tetraethylenepentamine (TEPA) primarily consists of primary and secondary amines, TEPA-functionalized solid amine adsorbents exhibit initially high CO 2 uptake. However, the poor thermal stability of TEPA poses a significant challenge to the practical application of TEPA-functionalized solid amine adsorbents in CO 2 capture processes. In this work, a facile and efficient approach was carried out to construct low-cost 1,2-butylene oxide (BO)-functionalized TEPA impregnated modified sepiolite (SEP) nanofibers with enhanced cyclic and thermal stability as well as the CO 2 adsorption kinetics. The optimal 39BO-T/2MS adsorbent exhibited a large CO 2 uptake of 2.73 mmol/g at 75 ℃ in 60 %CO 2 /40 %N 2 , decreased chemisorption heat and superior cyclic stability with minimal decline over 10 consecutive cycles, owing to the improved structural properties of 2MS support via in-situ acid activation; BO-functionalized TEPA to improve the amine state distributions, reduce the heat of adsorption and suppress the formation of urea linkages and optimized amine loading to enhance the amine efficiency. The BO-functionalization of TEPA-based adsorbents has proven to be an effective strategy to enhance thermal/chemical/cyclic stability and adsorption kinetics, despite the trade-off of reduced adsorption capacities and amine efficiencies. This approach offers a promising direction for developing more robust and efficient adsorption materials for various applications.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2025
·
IF 9.2
Wen-Jing Shi,Zhen-Hong He,Mei-Xia Yang,Yue Tian,Lu-Ting Pan,Xin-Yan Wei,Weitao Wang,Kuan Wang,Huan Wang,Zhao-Tie Liu
Utilizing renewable energy-derived H2 to convert CO2 into valuable chemicals represents a crucial strategy for achieving carbon emission reduction and enabling resource utilization. Conventional photocatalytic CO2 methanation, however, is hindered by low activity and inefficient energy utilization, limiting its practical application. In the present work, we developed a Cu and Nd co-doped Co3O4 catalyst that synergistically harnesses both light and thermal energy for photothermal catalytic CO2 methanation. The optimized catalyst with a molar ratio of 9/1/1 for Co/Cu/Nd (denoted as CCNO-9) achieves a remarkable CH4 formation activity of 27.3 mmol·gcat-1·h-1 at 200 °C, especially at ambient pressure. The incorporation of foreign Cu and Nd atoms in Co3O4 lattice induces the formation of abundant heterogeneous interfaces and oxygen vacancies, thereby exposing additional active sites for CO2 adsorption and activation. In-situ DRIFTS studies revealed that the Nd promotes the conversion of CO2 into *HCO3- and *COOH key intermediates. The photothermal synergy significantly enhances the reaction. Photoexcitation generates electrons and holes for CO2 reduction, while the thermal energy assists in overcoming the reaction energy barriers. DFT calculations confirmed that the CCNO-9 catalyst requires the lowest energy barrier for the rate-determining step from *COOH to *CH4. This study presents a very active and stable photothermal catalytic system for efficient CO2 conversion, advancing the development of low-carbon catalytic technologies.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Shihui Wang,Futang Liu,Xiaole Dong,Dongmei Lv,Guodong Zhang,Xiaokun Li,Jinkai Pan,Qingmei Meng,Xinpeng Liu
In this study, composite carbon dioxide (CO 2 ) absorbents were developed following a transferable design strategy involving a polyamine-rich ionic liquid (IL) scaffold, microstructure control via synthesis pathway, and optional nanofluid construction to tailor transport properties. Specifically, absorbents based on [TEPA·Lys] IL and deep eutectic solvents (DESs) were prepared. The effects of mass ratio, temperature, and other factors on absorption/regeneration performance were investigated. The results showed that the composite absorbent of [TEPA·Lys] and [EG/ChCl] with a mass ratio of 4:6 exhibited the optimal performance. At 298.15 K, the absorption capacity reached 102.55 mg CO 2 /g absorbent. However, the [TEPA·Lys][EG/ChCl] absorbent exhibited suboptimal cyclic regeneration performance. In order to seek effective ways of regeneration enhancement, the methods of altering the synthesis sequence and adding nanoparticles have been explored. The synthesis of [TEPA·Lys]@ChCl+EG showed relatively stable regeneration performance under optimal conditions. The results of density functional theory (DFT) calculations showed that [TEPA·Lys][EG/ChCl] has stronger CO 2 binding energy and lower absorption energy barrier, which is beneficial to the initial absorption. The [TEPA·Lys]@ChCl+EG has a lower desorption energy barrier, which is conducive to regeneration. As for the performance of nanofluids, it was found that the addition of 0.05 wt% carbon nanotubes (CNTs) can increase the absorption capacity of [TEPA·Lys][EG/ChCl] by 5.2 %, but the degree of regeneration enhancement was lower than the effect of synthesis sequence. This study provides experimental and theoretical insights for developing effective regeneration enhancement approaches for CO 2 absorbents.
✓ 已验证
产品关联
DOI
高影响因子
Gas Science and Engineering
·
2025
·
IF 5.5
Chenyang Lin,Yijun Wang,Yihang Liu,Takeshi Hagio,Baowen Zhou,Xinling Li,Zhen Huang
Direct air capture (DAC) is a technology that captures low concentrations of CO 2 directly from the air. In recent years, amine-modified solid adsorbents have been widely utilized to facilitate an efficient CO 2 capture process. In industrial applications, the significant pressure drop reduced by powder accumulation results in economic losses for fans. However, previous studies on monoliths have failed to simultaneously satisfy the industrial requirements for both adsorption capacity and mechanical strength. In this work, a novel honeycomb monolith was proposed to address this issue. The seven uniformly distributed channels effectively reduced pressure drop, while the wall thickness satisfied the mechanical strength requirements under industrial application conditions. And the structure was optimized by using activated carbon. After high-temperature treatment, the new pore formed in the space previously occupied by the activated carbon. Through the secondary loading approach, the amine loading was comparable to the powder. Compared with the monoliths without activated carbon, the pore volume significantly increased (from 5.31 % to 96.26 %). The pore volume of 20AC-SiO 2 -M reached 0.84 cm 3 g −1 . At 35 °C and 400 ppm, 20AC-SiO 2 -M exhibited the best CO 2 adsorption capacity (1.94 mmol/g) and the fastest CO 2 adsorption rate (0.0395 mmol/(g.min)). Additionally, the structure strength (1.46 MPa) and pressure drop losses (0.002 psi) were tested, and both parameters met the requirements for industrial applications.
✓ 已验证
产品关联
DOI
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2025
·
IF 4.6
Wenbin Huang,Ningran Hou,Han Yang,Zhen Xu,Tianyu Bai,Fan Shao,Yasong Zhou,Qiang Wei
Series g-C 3 N 4 /Cu/B-TiO 2 (x) composites with different mass ratio of g-C 3 N 4 to Cu/B-TiO 2 were prepared and tested for photocatalytic reduction of CO 2 . The structure–function relationship of the photocatalysts was investigated through various characterization methods and photocatalytic experiments. The results show that g-C 3 N 4 can be uniformly distributed on the surface of Cu/B-TiO 2 and formed a stable heterojunction structure, which effectively reduced the band gap width of the catalyst, thus significantly improving the visible light absorption capacity of the catalyst. The modulation of the composite material properties can be realized by regulating the composite ratio of g-C3N4 and Cu/B-TiO 2 . The rate and selectivity of photocatalytic reduction of CO 2 to produce CO reached the maximum when the mass ratio of g-C 3 N 4 to Cu/B-TiO 2 was 3:7, and the rate of CO production was as high as 32.65 μmol∙g −1 ∙h −1 , which was about 12.87 percentage points higher than that of Cu/B-TiO 2 .
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·Vol. 14
·期 1
·120635
·
IF 7.2
Nan Xiang,Huajun Sun,Guifeng Tang,Na Zhang,Chuanhui Gao,Yuetao Liu,Chuanxing Wang,Junwei Ding,Li Ding
Photocatalytic conversion of CO 2 into solar fuels presents a promising strategy for mitigating greenhouse gas emissions. The reduction of CO 2 to methanol not only enables carbon resource recycling but also facilitates the production of sustainable fuels. In this study, a litchi-shell-like TiO 2 /WO 3 -5 hollow heterojunction catalyst was constructed, featuring surface alkalization and abundant oxygen vacancies. This unique architecture provides a high specific surface area and plentiful active sites, thereby significantly enhancing CO 2 adsorption capacity. Under neutral conditions (pH = 7), the TiO 2 /WO 3 -5 catalyst achieves a remarkable methanol production rate of 780 μmol·g⁻¹ ·h⁻¹ with a high selectivity of 88.6 %, substantially outperforming its individual counterparts, pure TiO 2 and WO 3 . Furthermore, the catalyst demonstrates excellent stability over multiple reaction cycles. A series of characterizations, including EPR, PL, TRPL, and in situ DRIFTS, collectively verify the formation of a Z-type heterojunction, which effectively promotes the spatial separation of photoinduced charge carriers and suppresses the formation of CO and CH 4 . This work underscores the crucial synergy between Z-type heterojunction engineering and surface defect manipulation in enhancing reaction selectivity and efficiency. The TiO 2 /WO 3 -5 catalyst offers a prospective platform for CO 2 -to-fuel conversion and provides valuable guidance for the design of advanced photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2025
·
IF 21.1
Jinxian Feng,Wendi Zhang,Lun Li,Yuxuan Xiao,Yatai Li,Xiaoling Lai,Weng Fai Ip,Hui Pan
The composition of a catalyst significantly influences its reconstruction, which is critical for electrochemical CO 2 reduction reaction (e-CO 2 RR). However, the mechanisms of how elemental composition affect the reconstructed structure and enhance e-CO 2 RR performance require further exploration. In this study, we modulate the Sn/Zn ratios in Sn-Zn alloy precursors to promote CO 2 -to-formate (HCOO⁻) conversion through a self-adaptive reconstructed structure with potential changing. Notably, the electrocatalyst exhibits exceptional CO 2 -to-HCOO⁻ performance at a Sn/Zn mass ratio of 1:1 (SnZn-55), achieving a Faraday efficiency (FE) >82% across a wide potential range (-0.73 to -1.13 V), a high HCOO⁻ partial current density of 45.75 mA cm⁻² at potential of highest HCOO- FE (92% at -0.93 V) and stability for up to 2000 hours. Systematic studies reveal that the reconstructed Sn-Zn metal/oxide-hydr oxide hybrid in SnZn-55 adapts dynamically to varying potentials, enhancing CO 2 -to-HCOO⁻ conversion by promoting proton accumulation, suppressing hydrogen evolution, and facilitating CO 2 -to-HCOO - basic steps. These findings provide deep insights into the interplay between elemental composition, reconstructed structure, and e-CO 2 RR performance, offering valuable guidance for designing advanced electrocatalysts for efficient CO 2 reduction in broad potential range.
✓ 已验证
产品关联
DOI
高影响因子