JOURNAL OF NANOPARTICLE RESEARCH
·
2015
·Vol. 17
·期 11
·1-8
·
IF 2.184
Chen Jun,Yang Xiao-Quan,Qin Meng-Yao,Zhang Xiao-Shuai,Xuan Yang,Zhao Yuan-Di
In this paper, polyethylene glycol-phospholipid structure is used to synthesize hybrid cluster of 40–50 nm diameter that contains hydrophobic bismuth sulfide nanoparticles and CdSe/ZnS quantum dots. The composite probe’s toxicity, CT imaging, and fluorescence imaging performance are also studied. Experimental results show that the nanocomposite hybrid cluster has obvious CT contrast enhancement and fluorescence imaging capability in vitro even after cellular uptake. It gives a CT number of 700 (Hounsfield units) at 15 mg/mL, higher than that of the current iobitridol CT contrast agent. 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide experiment reveals that it has low cytotoxicity at concentration up to of 3.14 mg/mL of Bi, indicating the composite probe has potential ability for CT and fluorescence bimodal imaging.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2015
·Vol. 22
·期 12
·1-8
·
IF 1.92
Zhao Minjian,Fu Zhifeng,Shi Yan,Yang Wantai
Poly(methyl methacrylate)- b -poly( tert -butyl acrylate) (PMMA- b -P t BA) block copolymers were prepared based on the new mechanism of 1,1-diphenylethylene (DPE) controlled radical polymerization in homogeneous systems. Firstly, monomer methyl methacrylate (MMA), initiator 2,2-azobisisoheptonitrile (ABVN) and a control agent DPE were solution polymerized to form DPE-containing PMMA precursor. Then the second monomer tert -butyl acrylate ( t BA) was simply heated in the presence of DPE-containing PMMA precursor used as macroinitiator, and block copolymers were synthesized successfully. The effects of polymerization temperature and solvent on molecular weight and molecular weight distribution of polymers throughout the polymerization were investigated. DPE-containing poly(styrene) precursor could not induce block polymerization.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2015
·Vol. 27
·期 2
·1457-1462
·
IF 1.569
Sun Yunfei,Yang Lili,Wei Maobin,Chen Gang,Che Guangbo,Yang Jinghai,Wang Zhe,Gao Zhiyuan
Well aligned CoS NRAs with different length have been grown on ITO substrates by a simple chemical method without any catalyst. The morphology properties of the as grown CoS nanostructures were investigated by SEM and TEM images. From the SEM results measured from the tilt-view, with the reaction time increasing, the length of CoS nanorods increased. However these CoS(6) NRAs partially aggregated, which will decrease the surface area of CoS NRAs. The optimized photovoltaic performance with a Voc of 0.66 V, a Jsc of 1.96 mA/cm 2 , an FF of 0.43, and a η of 0.64 % is obtained from the device based on CoS(4) ANRAs electrode. Although the quantum dot sensitized solar cells (QDSSCs) with CoS NRAs show smaller η values than that of the QDSSC with sputtered Pt counter electrode, the CoS material will be an efficient alternative for the Pt electrode due to its excellent catalytic ability and low cost.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
·
2015
·Vol. 30
·期 5
·1085-1091
·
IF 0.399
Li Jiajia,Wang Qizhao,Bai Yan,Jia Yongming,Shang Pan,Huang Haohao,Wang Fangping
Polyaniline (PANI) was one of the most extensively studied adsorbents due to its low cost and good environmental stability. The objective of the current study was to improve the selective capabilities of PANI for anionic dyes. We found that the acid doped PANI prepared with hydrochloric acid and p-toluenesulfonic acid (PTSA) could selectively adsorb anionic dyes. It exhibited very good selectivity for OG dye, the mechanism was proposed based on the chemical interaction of PANI with the sulfonate group of the dyes. The effects of solution pH, initial dye concentration, and different HCl/PTSA mole ratios on the adsorption capacity of OG have been investigated. Kinetic simulations indicated that the adsorption process could be well represented by pseudo-second-order kinetic plots. The isothermal adsorption curve fitting also showed that the adsorption process could be well described by the Langmuir isothermal equation. The results showed that acid doped PANI could be employed as a promising adsorbent for anion removal from dye wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Nano Research
·
2015
·Vol. 8
·期 12
·4061-4071
·
IF 7.01
Zhao Zhao,Zhang Xiaoyan,Zhang Guoqiang,Liu Zhenyu,Qu Dan,Miao Xiang,Feng Pingyun,Sun Zaicheng
To further understand the effect of structural defects on the electrochemical and photocatalytic properties of TiO 2 , two synthetic approaches based on hydrothermal synthesis and post-synthetic chemical reduction to achieve oxygen defectimplantation were developed herein. These approaches led to the formation of TiO 2 nanorods with uniformly distributed defects in either the bulk or on the surface, or the combination of both, in the formed TiO 2 nanorods (NRs). Both approaches utilize unique TiN nanoparticles as the reaction precursor. Electron microscopy and Brunauer-Emmett-Teller (BET) analyses indicate that all the studied samples exhibit similar morphology and similar specific surface areas. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) data confirm the existence of oxygen defects (VO). The photocatalytic properties of TiO 2 with different types of implanted VO were evaluated based on photocatalytic H 2 production. By optimizing the concentration of VO among the TiO 2 NRs subjected to different treatments, significantly higher photocatalytic activities than that of the stoichiometric TiO 2 NRs was achieved. The incident photon-to-current efficiency (IPCE) data indicate that the enhanced photocatalytic activity arises mainly from defect-assisted charge separation, which implies that photo-generated electrons or holes can be captured by VO and suppress the charge recombination process. The results show that the defective TiO 2 obtained by combining the two approaches exhibits the greatest photocatalytic activity enhancement among all the samples.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2015
·Vol. 27
·期 2
·2120-2127
·
IF 1.569
Gui Dayong,Xiong Weijian,Tan Guiming,Li Shibin,Cai Xueqing,Liu Jianhong
A liquid crystalline molecule, 4′-allyloxy-biphenyl-4-ol (AOBPO), was synthesized from 4,4′-dihydroxybiphenyl and allyl bromide as raw materials and then used to functionalize graphene nanoplatelets (GNS) via covalent bond and π–π interactions. The AOBPO functionalized graphene nanoplatelets (AOBPO–GNS) were characterized by fluorescence spectroscopy, thermal gravimetric analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction and Raman spectroscopy, and then mixed with silicone resin as fillers to fabricate silicon resin nanocomposites. The drastic quenching of the AOBPO fluorescence elucidated that the biphenyl anchoring unit of liquid crystalline AOBPO was strongly interacted with the surface of graphene sheets via π–π interactions. FTIR and Raman spectroscopy proved the existence of covalent interaction between the AOBPO and GNS. The thermal and mechanical properties testing indicated that the tensile strength of silicon resin nanocomposites increased by 463 % over that of neat silicon resin when the mass fraction of AOBPO–GNS was 1.0 %, and the elastic modulus of silicon resin nanocomposite increased by 1080 % over that of neat silicon resin if it came up to 2.0 %. The thermal conductivity of the resin filled with the AOBPO–GNS was improved to be 3.105 W/(m K) at the mass fraction of 15.0 %, which was enhanced more than 38 times over that of neat silicon resin. The resulted thermally conductive and mechanically applicable silicon resin nanocomposites could be significant in a wide variety of electronic packaging applications.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2015
·Vol. 183
·期 1
·329-336
·
IF 3.741
Zuo Pengli,Gao Junfa,Peng Jun,Liu Jianha,Zhao Mingming,Zhao Jiahong,Zuo Pengjian,He Hua
We are introducing functionalized carbon dots (C-dots) coated with a shell of molecularly imprinted sol-gel as a new tool in molecular imprint-based detection. Specifically, an imprint recognizing nicotinic acid (NA) was prepared in two steps. The first involves pyrolytic decomposition of citric acid in the presence of aminopropyltriethoxysilane to yield triethoxysilyl-modified C-dots with a typical size of 2.8 ± 1.1 nm. These are then polycondensed in the presence of tetraethoxysilane and NA at room temperature to give spherical silica nanoparticles (SiNPs) with a typical size of ~300 nm and containing C-dots and NA in the silica matrix. NA was then removed by extraction. The resulting SiNPs are well permeable to NA, photostable, display strong blue luminescence and can bind NA fairly selectively. The fluorometric detection scheme is based on the finding that increasing concentrations of NA quench the fluorescence of the C-dots in the SiNPs. NA can be determined by this method in the 0.5 to 10.5 μM concentration range, with a 12.6 nM detection limit. The composite was successfully utilized as a fluorescent probe for the determination of NA in spiked human urine samples. The method is believed to have a wider scope in being applicable to other analytes that are capable of quenching the fluorescence of C-dots.
A new type of nicotinic acid sensitive molecularly imprinted polymers functionalized carbon dots (SiNPs) were fabricated by the sol-gel polymerization. The composite was utilized as a fluorescent probe for the determination of nicotinic acid in human urine samples.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2015
·Vol. 183
·期 2
·633-642
·
IF 3.741
Fang Shaoming,Dong Xiaodong,Ji Hongfei,Liu Shunli,Yan Fufeng,Peng Donglai,He Linghao,Wang Minghua,Zhang Zhihong
This article describes an aptasensor for lysozyme that is based on a gold electrode modified with an aptamer-wrapped composite consisting of three-dimensional reduced graphene oxide, cuprous oxide, and plasma-polymerized propargylamine (Cu 2 O@rGO@PpPG) as the sensing layer. The nanocomposite consisting of Cu 2 O@rGO was synthesized by simultaneously reducing GO and Cu(II) ions with glucose and then modified by plasma-enhanced chemical vapor deposition using propargylamine as the monomer gas. The resulting amine-rich nanofilms of Cu 2 O@rGO@PpPG nanocomposite were deposited on a gold electrode. Differential pulse voltammetry and electrochemical impedance spectroscopy show these layers to exhibit a good amperometric response and variation of the charge transfer resistance to lysozyme after aptamer strands had been immobilized on the films via electrostatic interaction between the negatively charged phosphate groups of the aptamer and the positively charged amino groups on the electrode. The sensor, when operated at 0.22 V (vs. Ag/AgCl), can detect lysozyme in the 0.1 nM to 200 nM concentration range with a 0.06 nM limit of detection. In addition, the sensor displays excellent selectivity and repeatability. In our perception, this strategy for preparing aptasensors holds a great potential with respect to the use of plasma-modified nanocomposites in clinical analysis.
An effective aptasensor was constructed using a nanocomposite consisting of three-dimensional reduced graphene oxide, cuprous oxide, and plasma-polymerized propargylamine as the sensitive layer. It exhibits a detection limit of 0.06 nM and an analytical range of 0.1 to 200 nM.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2015
·Vol. 26
·期 9
·6776-6780
·
IF 1.569
Cao Renping,Xu Haidong,Peng Dedong,Gou Qingdong,Zhou Shenlin,Liu Pan,Yu Xiaoguang
BaWO 4 :Sm 3+ , Mo 6+ /K + phosphors are synthesized by a high temperature solid-state reaction method in air. The very strong emission bands peaking at ~600 and 644 nm and the strongest excitation band peaking at ~403 nm are assigned to the 4 G 5/2 → 6 H J (J = 7/2 and 9/2) and 6 H 5 / 2 → 4 F 7 / 2 transitions of Sm 3+ ion, respectively. The optimal Sm 3+ doping concentration is ~5 mol%. Emission intensity of BaWO 4 :Sm 3+ phosphor is increased more than twice owing to charge compensation when the K + ion is codoped as charge compensator, however, Mo 6+ ions is small influence to its emission intensity. The energy transfers and luminous mechanism are explained by using energy level diagrams of WO 4
2− group and Sm 3+ ion. Lifetimes of Ba 0.925 WO 4 :0.05Sm 3+ , Ba 0.925 W 0.9 Mo 0.1 O 4 :0.05Sm 3+ , and Ba 0.9 K 0.05 WO 4 :0.05Sm 3+ phosphors with excitation 403 nm are about 0.933, 0.882, and 0.693 ms, respectively. The experiment results indicate that BaWO 4 :Sm 3+ , Mo 6+ /K + phosphors will be a potential red phosphor candidate for white LEDs based on near UV (~403 nm) LED chip and research contents are useful to improve luminescence properties of Sm 3+ -doped phosphors.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2015
·Vol. 33
·期 4
·587-596
·
IF 1.835
Song Zhi-ming,Shi Bo,Ding Jian-xun,Zhuang Xiu-li,Zhang Xiao-nan,Fu Chang-feng,Chen Xue-si
An electrospun poly(lactide- co -glycolide) (PLGA) membrane was prepared and used to perform the anti-adhesion of Achilles tendon. Throughout the experiments, the membrane showed an appropriate degradation rate, and the pH values of degradation media were maintained at around 7.4. Simultaneously, the excellent biocompatibility of the membrane in vitro and in vivo was confirmed by live/dead and histopathological analyses. Meanwhile, the membrane can reduce tendon adhesion significantly and promote functional recovery effectively. The encouraging results were further demonstrated by hematoxylin and eosin (H&E), and Masson’s trichrome stainings, and type I collagen immunohistochemical analysis. It was concluded that the model treated with the electrospun PLGA membrane was significantly better with respect to the adhesion prevention and tissue repair than that without treatment. Considering the results of degradation and adhesion prevention efficacy, the electrospun PLGA membrane would be a great candidate for the prevention of postoperative tendon adhesion.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FLUORESCENCE
·
2015
·Vol. 25
·期 2
·327-333
·
IF 1.927
Zhao Xu,Yin Guohui,Jin Di,Yan Xilong,Li Yang,Chen Ligong
A novel hydroxyethyl piperazine functionalized cyanine derivative was designed and synthesized. It presents selective colorimetric as well as ratiometric absorption responses to trivalent metal cations (Cr 3+ , Fe 3+ and Al 3+ ) over a variety of divalent and monovalent metal cations in 3:7 ethanol-water solution. Detection limits of this method for Cr 3+ , Fe 3+ and Al 3+ were 3.99 μM, 4.30 μM and 1.85 μM, respectively. The recognition mechanism was attributed to the protonation of the organic probe, which blocked the photoinduced electron transfer (PET) process. In addition, the sensor was also successfully applied to the determination of Cr 3+ in prepared samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2015
·Vol. 23
·期 2
·1460-1470
·
IF 2.828
Chen Wei-fang,Zhang Jinghui,Zhang Xiaomao,Wang Weiya,Li Yuxiang
Nano-zero-valent iron/activated carbon (nZVI/AC) composite was evaluated for its effectiveness in the stabilization of Cu, Pb, Cd, and Cr in dredged river sediment. Synthetic precipitation leaching procedure (SPLP) and toxicity characteristic leaching procedure (TCLP) were adopted to compare the effects of nZVI/AC dosage, particle size, time duration, and temperature on heavy metal leachability. The results show that leachability dropped considerably with the addition of nZVI/AC and powdered particles in the size of 0.075–0.18 mm was more effective in stabilization than granular ones. Stabilization effect was stable in long-term and robust against changes in temperature. Tessier sequential extraction revealed that heavy metals were associated with solid particle, inorganic or organic matters in sediment. The addition of nZVI/AC was able to convert relatively weakly bound heavy metals into more strongly bound species and thus reduce the bioavailability and toxicity. Also, the standard potential of heavy metals may decide the mechanism of stabilization process.
✓ 已验证
产品关联
DOI
PubMed
高影响因子