文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3889至3900个,产品总数4,590个

切换升序
C
ChemCatChem · 2025 · IF 3.9

Structure Evolution of Pd/C Catalyst in the Catalytic Dehydrogenation of Dodecahydro-N-ethylcarbazole: Effects of Pd Species and Particle Size

Jingrong Li,Tingting Xiao,Xinluona Su,Qihang Gong,Peikai Luo,Jian Li,Haiyang Cheng,Fengyu Zhao

Graphical The evolution of the geometric structure and electronic states of Pd species was revealed for Pd/C catalysts in catalyzing the dehydrogenation of 12H-NECZ. The oxidized Pd δ+ species was reduced to Pd 0 species with finely-dispersed on the surface of support to generate H 2 with a high efficiency of 98.3%. The dehydrogenation of liquid organic hydrogen carriers is of significant potential for hydrogen energy applications. We successfully synthesized a highly efficient and stable Pd/C catalyst featuring ultrasmall (2.22 nm) and stable Pd nanoparticles via the deposition–precipitation method for the dehydrogenation of dodecahydro- N -ethylcarbazole. Interestingly, the Pd structure evolves during the reaction, with the Pd 2+ species on Pd/C catalyst re-dispersing into uniformly small-sized Pd 0 nanoparticle under reaction conditions. The conventional thermal treatment of calcination–reduction typically results in larger Pd particles due to the stronger metal-support interaction. Kinetic studies revealed the oxidation state of Pd 2+ species (Pd(OH) 2 , PdO) is more active for the dehydrogenation reaction compared to the metallic state Pd 0 species. The in situ structure evolution induced ultrasmall Pd nanoparticles (2.22 nm) with a constant Pd 0 /Pd 2+ ratio, achieving a high efficiency (98.3%) of H 2 release from 12H-NECZ dehydrogenation at 180 °C. This work provides a simple method for preparing highly dispersed Pd/C catalyst with stable ultrasmall Pd particles, offering valuable insights to researchers in the field of supported metal catalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COMPARATIVE BIOCHEMISTRY AND PHYSIOLOGY C-TOXICOLOGY & PHARMACOLOGY · 2025 · IF 4.3

Study on the alleviation of reactive oxygen species-mediated flunitrazepam toxicity in zebrafish (Danio rerio) by vitamin C and its mechanism

Qiuyu Liu,Chuxiao Hu,Xinqin Li,Qiulan Liu,Wenjie Xia,Yuan Ren

The frequent detection of psychoactive drugs in aquatic environments has caused various toxic effects on aquatic organisms, highlighting the urgent need to explore remediation methods and mechanisms. Against the backdrop of toxicity induced by the typical benzodiazepine (BZD) flunitrazepam (FLZ) in zebrafish, this study evaluates the mitigating effects of vitamin C (VC) on FLZ-induced embryonic developmental toxicity, larval behavioral anomalies, apoptosis, oxidative stress, and mitochondrial dysfunction at environmentally relevant concentrations through reactive oxygen species (ROS)-mediated pathways. Furthermore, molecular dynamics simulations were utilized to decipher the mechanism underlying ROS inhibition. Results demonstrated that co-exposure to 0.5 μg/L VC with FLZ (0.05 μg/L and 0.2 μg/L) significantly elevated the hatching rate of zebrafish embryos at 72 hpf and decreased the larval malformation rate at 96 hpf. In terms of physiological and biochemical indicators, VC significantly inhibited the FLZ-induced increase in ROS and 8-hydroxy-2′-deoxyguanosine (8-OHdG) levels. VC also upregulated the activity of mitochondrial uncoupling protein 2 (UCP2), a key regulator of ROS production. Molecular docking and dynamics simulations revealed that VC competitively binds to the LYS 38 and LYS 240 sites of UCP2, destabilizing FLZ-UCP2 interactions via steric hindrance and hydrogen bond competition. With the restoration of UCP2 activity, its proton leak function was enhanced, suppressing excessive ROS generation. Consequently, uqcr2b , cox4i1l , and atp5g3b were normalized, restoring ATP synthesis capacity and significantly alleviating FLZ-induced mitochondrial dysfunction. This study elucidates the mechanism by which VC counteracts ROS-mediated FLZ toxicity, providing critical insights for assessing environmental risks and formulating protective strategies against pollutants.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

High-entropy doping for high-performance Na3V2(PO4)3@C cathode materials in sodium-ion and hybrid lithium/sodium-ion batteries

Beibei Ma,Yawen Liang,Xiaokai Ma,Wenjie Wang,Chengcheng Miao,Guanqi Yu,Qizhao Wang,Chunyang Xu,Xinwei Cui

The rising demand for cost-effective and safe energy storage systems has ignited strong global interest in advanced cathodes that surpass lithium-ion batteries in practical applications. Herein, we propose a composite material in which five ions, Ti 4+ , Mn 2+ , Fe 2+ , Zr 4+ , and Mo 6+ , are doped into the lattice of Na 3 V 2 (PO 4 ) 3 and a uniform carbon-coating layer is applied to its surface, resulting in the formation of high-entropy doped Na 3 V 2 (PO 4 ) 3 @C materials (HENVP@C). When employed as the cathode material for Sodium-ion batteries (SIBs) and hybrid lithium/sodium-ion batteries (HLSIBs), HENVP@C shows remarkable Li + /Na + storage capabilities. The results of electrochemical performance tests on half-cells reveal that HENVP@C exhibits a high capacity, along with excellent cycle life and stability. High-entropy doping effectively stabilizes the NASICON structure of HENVP@C, enhances ionic conductivity, and optimizes ion diffusion kinetics, particularly improving its dual-ion pseudocapacitive storage capability. In addition, the surface carbon coating improves the electronic conductivity of the material. The insights presented in this work provide new ideas for designing cathode materials for SIBs and HLSIBs.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MATERIALS & DESIGN · 2024 · IF 7.6

Microstructural evolution and 1500 °C oxidation resistance of Mo(Al,Si)2 fabricated via an innovative two-step SHS-SPS technique

Nana Zhu,Lu Zhu,Baojing Zhang,Peizhong Feng,Shiheng Li,Philipp V. Kiryukhantsev-Korneev,Evgeny A. Levashov,Xuanru Ren,Xiaohong Wang

An innovative two-step approach of self-propagating high-temperature synthesis (SHS) and spark plasma sintering (SPS) was developed to rapidly fabricate MoSi 2 and Mo(Al,Si) 2 ceramics for high-temperature anti-oxidation applications. The SHS process predominantly promoted the synthesis of high-purity and high-yield MoSi 2 and Mo(Si,Al) 2 phases in the alloyed powders. Subsequently, dense and crack-free MoSi 2 and Mo(Al,Si) 2 ceramics were produced using SPS. 1500 °C oxidation tests of the ceramics (100 h) revealed the formation of a protective SiO 2 oxide layer on the surface of MoSi 2 ceramics, while an Al-Si-O composite glassy oxide layer formed on Mo(Si,Al) 2 ceramics, which exhibited better thermal stability and lower oxygen permeability compared to the single SiO 2 oxide layer. However, an excessive Al content (>0.05 at.%) compromised the oxidation resistance due to the emergence of a Si-depleted Mo 5 (Si,Al) 3 layer with inferior oxidation resistance, which was caused by the high-temperature diffusion of Si. Therefore, via this novel two-step SHS-SPS technique compact and crack-free Mo(Si,Al) 2 ceramics can be rapidly synthesized at high temperatures. When trace amount of Al was added (0.05 at.%), Mo(Si 0.95 Al 0.05 ) 2 showed optimum high-temperature oxidation resistance.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry B · 2025 · IF 5.7

Poly (L-lactic acid)/Gelatin microfiber membrane loaded with Mitomycin C promoting bladder defect repair by anti-fibrosis and anti-bacteria

Lunjie Zhao,Jianyou Xia,Congcong Yang,Jianping Tao,Shanfu Zhang,Wentao Hu,Chen Zhang,Jiuwu Zhang,Qiang Li,Yujie Xu

When the bladder is affected by factors such as tumors, tuberculosis, and trauma, its normal structure and function will be damaged inescapably. At this point, bladder replacement or enlargement surgery becomes necessary to restore its structure and improve the patient's quality of life. Traditional bladder reconstruction surgery, specifically ileum augmentation cystoplasty, has a complex surgical process, along with relatively large operative wounds and intestinal obstruction complications. There is an urgent need for bladder replacement material. Over the past decade, synthetic bladder scaffolds have emerged as alternatives; however, most fail to simultaneously address postoperative fibrosis and bacterial infection. To overcome these challenges, we developed an electrospinning poly (L-lactic acid)/gelatin (PLLA/GEL) microfiber membrane loaded with mitomycin C (MMC). By optimizing the PLLA/GEL ratio (7:3), the membrane had both good rigidity and excellent elasticity. The MMC-loaded fibers demonstrated sustained drug release, effectively inhibiting E. coli and S. aureus in vitro. In rat partial cystectomy models, the PLLA/GEL/MMC group showed reducing collagen III deposition through TGF-β/Smad2 pathway inhibition, enhancing urothelium regeneration and promoting angiogenesis. Notably, the membrane-maintained cell viability for both urothelial cells and smooth muscle cells over 7 days, confirming biocompatibility. These findings highlight a promising potential of the PLLA/GEL/MMC microfiber membrane not only as a material for bladder tissue engineering but also as a tool for therapeutic intervention that addresses multiple facets of bladder healing and regeneration.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2025 · IF 9.8

Economical and efficient synthesis of a uniform LiMn0.6Fe0.4PO4/C cathode for lithium ion batteries via a manganese iron spinel oxide precursor

Zhongdong Peng,Xinghuo Luo,Jiahui Wu,Tingting Yi,Guorong Hu,Yanbing Cao,Ke Du

Manganese-rich olivine phosphates (LiMn y Fe 1-y PO 4 , y > 0.5) are promising as cathodes for lithium ion batteries due to their high energy density and good safety. However, the sluggish kinetics of the Mn 2+ /Mn 3+ redox reaction and inherently low conductivity have impeded the full utilization of their performance. The uniform distribution of transition metal ions is an effective strategy for high performance LiMn y Fe 1-y PO 4 cathode. In this study, leveraging the analogous crystal structures of manganese and iron spinel oxides , we introduce a novel Mn 1.8 Fe 1.2 O 4 precursor. This precursor facilitates the formation of a solid solution phase material with uniform manganese and iron distributions through a chemical coprecipitation method. When employed in the fabrication of LiMn 0.6 Fe 0.4 PO 4 /C composites, improved kinetic conditions for electrochemical reactions due to consistent phase composition, this approach yields an impressive energy density of 593 Wh kg −1 at 0.1C with a middle voltage (3.93 V), 149.8 mAh g −1 at 1C, a superior rate capability of 132.5 mAh g −1 at 10C, and a remarkable capacity retention of 96.5 % after 300 cycles at 1C. Techno-economic analyses further demonstrate that this method offers significant economic and environmental benefits, owing to high material utilization efficiency, minimized emissions, and energy savings. The oxide coprecipitation process presents a sustainable pathway for the industrial-scale synthesis of LiMn y Fe 1-y PO₄ cathodes and potentially extends to other advanced cathodes in high performance lithium ion batteries.

CAS / MDL: 34819-78-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2025 · IF 7.9

The core-shell structure of bacteria based C@Sn/Carbon nanotubes exhibits super stable cycling performance for lithium-ion battery anodes

Feng Li,Putao Han,Jun Zhou,Yuhua Yang

Tin-based materials are recognized as a promising anode for lithium-ion batteries due to their high theoretical capacity, abundant reserves in nature, and suitable low discharge potential. However, their practical application has been hindered by rapid capacity fading during cycling, which is primarily caused by pulverization during severe volume changes. To extend the lifespan of Tin-based anodes, it is essential to mitigate the significant volume alteration associated with the insertion and extraction of lithium ions. In this work, we engineer successfully a simple core-shell structure where Tin-based components are only encapsulated within bacterial cells and compounded with carbon nanofibers (Sn@C/CNT). The bacterial exterior carbon-shells preserve effectively the structural stability of the Sn nanoparticles, suppress their aggregation, and buffer their volume expansion. Additionally, the carbon nanofiber network on the surface, characterized by high electrical conductivity and excellent mechanical flexibility, securely anchor the core-shell structure. This design enhances significantly the electrical conductivity and structural integrity of the overall electrode. When utilized as an anode in lithium-ion batteries, Sn@C/CNT exhibits an outstanding cycling stability and excellent reversible capacity of 798.77 mA h g −1  at 10th cycle, and 736.31 mA h g −1 even after 150 cycles at a current density of 100 mA g −1 .

CAS / MDL: 50-99-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Experimental and Therapeutic Medicine · 2014 ·Vol. 8 ·期 3 ·935-942 · IF 0.941

Cryopreserved mouse fetal liver stromal cells treated with mitomycin C are able to support the growth of human embryonic stem cells

Wei Zhang,Jiabo Hu,Quanhui Ma,Sanqiang Hu,Yanyan Wang,Xiangmei Wen,Yongbin Ma,Hong Xu,Hui Qian,Wenrong Xu

An immortalized mouse fetal liver stromal cell line, named KM3, has demonstrated the potential to support the growth and maintenance of human embryonic stem cells (hESCs). In this study, the characteristics of KM3 cells were examined following cryopreservation at -70˚C and in liquid nitrogen for 15, 30 and 60 days following treatment with 10 µg/ml mitomycin C. In addition, whether the KM3 cells were suitable for use as feeder cells to support the growth of hESCs was evaluated. The inhibition of mitosis without cell death was observed when the KM3 cells were treated with 10 µg/ml mitomycin C for 2 h. The morphology of the KM3 cells cryopreserved in liquid nitrogen for 60 days was not markedly changed, and the cell survival rate was 84.60±1.14%. By contrast, the survival rate of the KM3 cells was 66.40±2.88% following cryopreservation at -70˚C for 60 days; the cells readily detached, were maintained for a shorter time, and had a reduced expression level of basic fibroblast growth factor. hESCs cultured on KM3 cells cryopreserved in liquid nitrogen for 60 days showed the typical bird's nest structure, with clear boundaries and a differentiation rate of 16.33±2.08%. The differentiation rate of hESCs cultured on KM3 cells cryopreserved at -70˚C for 60 days was 37.67±3.51%. These results indicate that the cryopreserved KM3 cells treated with mitomycin C may be directly used in the subculture of hESCs, and the effect is relatively good with -70˚C short-term or liquid nitrogen cryopreservation.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY · 2025 · IF 6.2

Fe-Vacancy-Modified Bi-YIG Ferrites with High Saturation Magnetization and High Dielectric Constant for Miniaturization of C-X Band Circulators

Zelai Cheng,Yulan Jing,Xi Wang,Feng Qiao,Xiuling Yang,Ying Chen,Mingshan Qu,Hua Su

The escalating demand for miniaturized high-frequency circulators in radar and satellite systems necessitates ferrite materials that concurrently possess a high saturation magnetization (4π M s ), a narrow ferromagnetic resonance linewidth ( ΔH ), and a high dielectric constant ( ε r ). In this study, a defect-engineered Bi 1.4 Ca 0.3 Zr 0.3 Y 1.3 Fe 4.6−x In 0.1 O 12−δ garnet ferrite was synthesized, in which synergistic Zr⁴⁺/In³⁺ dual-site doping and controlled Fe-vacancies improved magnetic performance. At optimal Fe-deficiency (x = 0.1), the material achieved a high 4π M s of around 2001 G, enabling C-X band operation. Simultaneously, it attained narrow ferromagnetic resonance linewidth ( ΔH ≈ 112   Oe) through reduced magnetocrystalline anisotropy (| K 1 |) and an enhanced dielectric constant ( ε r ≈ 26.2) via the “rattling” effect that compensated for vacancy-induced polarization loss. A straight-circuit microstrip circulator based on this ferrite ( r 0 = 2.14   mm, r 1 = 7.76   mm) was operated in the bandwidth from 4.23 to 9.85   GHz. It exhibited insertion loss ( S 21 ) better than −0.5   dB and isolation/return loss ( S 11 / S 12 ) below −20   dB. A curved-microstrip redesign further reduced the substrate area to 28.7% of the original while maintaining operation from 4.34 to 9.36   GHz, demonstrating exceptional potential for compact C-X band circulators.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2025 · IF 9.8

FeS/C 3D nanostructures constructed by carbothermal reduction of lignin to restrain polysulfides shuttle effect towards high-performance sodium-ion batteries

Jinxiang Song,Youfeng Lin,Xihong Zu,Zhu Jiang,Wenli Zhang,Xueqing Qiu

Transition metal sulfides (TMSs) serve as promising anode materials for sodium-ion batteries (SIBs) because they offer high theoretical capacity, suitable intercalation voltage and abundant resources. However, the large sodium ion radius induces significant volume expansion and pulverization, resulting in slow kinetics and short cycle life. Additionally, polysulfides formed during cycling trigger “under-voltage failure” and capacity degradation, limiting their practical application. To overcome these challenges, we employ the complexation of Fe 2+ ions with hydroxyl groups in ammoniated lignin to generate amorphous spherical intermediates. Then, we synthesize FeS/C anode materials through pyrolysis-induced carbothermal reduction, where lignin-derived carbon acts as a reducing agent to convert Fe 2 O 3 (formed from FeSO 4 pyrolysis) into FeS. The FeS/C nanospheres are encapsulated by carbon shells and integrated into a 3D macroporous carbon matrix, effectively mitigating FeS volume expansion and polysulfide shuttling. The optimized FeS/C-31 anode demonstrates excellent performance, delivering a high specific capacity of 562.6 mAh g −1 at 0.1 A g −1 and maintaining 382.2 mAh g −1 at 20 A g −1 . It also exhibits outstanding cycling stability, with a capacity retention of 92.3 % after 1000 cycles at 10 A g −1 .This study presents a sustainable and scalable method for producing FeS/C anodes from industrial lignin waste, offering a practical solution for next-generation SIBs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RARE METALS · 2025 · IF 11

A Micro-Nano Flower-Like Na3V2(PO4)3@C Constructed by Polar-Driven H-Bond Engineering Toward High-Rate Sodium Storage

Xiaolei Wu,Ren Huang,Yibing Zhang,Peng Lv,Suhua Chen,Ying Bai

en The polyanionic compound Na 3 V 2 (PO 4 ) 3 (NVP) has emerged as a competitive cathode material for sodium-ion batteries (SIBs), owing to its high-voltage redox activity (3.4 V vs. the Na + /Na reference couple) and NASICON-type framework that enables superior ionic conductivity. However, the electrochemical performance of NVP is hampered by low intrinsic electronic conductivity, particularly under ultra-fast charging and long-term cycling conditions. Herein, a hierarchical micro-nano flower-like Na 3 V 2 (PO 4 ) 3 with a carbon-coating layer (HF-NVP@C) is synthesized by a facile n-propanol-assisted precipitation method. Theoretical analysis and experimental tests reveal that the polar-driven hydrogen bond engineering, manifested in the distinct molecular interaction between n-propanol and ultrapure water (characterized by a shorter O-H bond length of 1.859 Å and higher binding energy of −0.312 eV compared to methanol and ethanol counterparts), underpins the formation of the unique hierarchical micro-nano flower-like architecture. This hierarchical architecture creates an expanded interfacial area, enhances ionic transport pathways, and increases electrochemically active sites. Furthermore, a glucose-derived carbon coating (∼2 nm in thickness) uniformly adheres to the NVP surface, effectively enhancing its electronic conductivity. Thus, the constructed HF-NVP@C exhibits superior rate capability (68.1 mAh g −1 at 150C) and long-term cycling stability (58.7% capacity retention after 5000 cycles at 1C). This work proposes a viable strategy for designing high-performance polyanionic cathodes using hydrogen bond engineering. 摘要 zh 聚阴离子化合物Na 3 V 2 (PO 4 ) 3 @C(NVP)因其具有高电压氧化还原活性(相对于Na + /Na参比电对为3.4 V)以及能实现优异离子电导率的NASICON型骨架结构,已成为一种具有竞争力的钠离子电池(SIBs)正极材料。然而,由于NVP的本征电子电导率较低,导致其在超快充电和长期循环条件下的电化学性能较差。在本文中,通过一种简便的正丙醇辅助沉淀法合成了具有碳包覆层的分级微-纳花状Na 3 V 2 (PO 4 ) 3 @C(HF-NVP@C)。理论分析和实验测试表明,极性驱动的氢键工程体现在正丙醇与超纯水之间独特的分子相互作用上(其O-H键长为1.859 Å,比甲醇和乙醇对应的键长更短,结合能更高-0.312 eV),是形成这种独特分级微-纳花状结构的基础。这种分级结构扩大了活性材料的面积,增强其离子传输通道,并增加电化学活性位点。此外,葡萄糖衍生的碳涂层(约2 nm厚)均匀地附着在NVP表面,有效提高其电子电导率。因此,构建的HF-NVP@C展现出优异的倍率性能(150C下为68.1 mAh g -1 )和长期循环稳定性(1C下循环5000次后容量保持率为58.7%)。这项工作证明氢键工程设计高性能聚阴离子正极材料策略的可行,同时也为开发高性能钠离子电池正极材料提供了研究基础。

CAS / MDL: 1333-86-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Scientific Reports · 2016 ·Vol. 6 ·期 1 ·1-8 · IF 5.228

A upconversion luminescene biosensor based on dual-signal amplification for the detection of short DNA species of c-erbB-2 oncogene

Lan Jianming,Liu Yingxin,Li Li,Wen Fadi,Wu Fang,Han Zhizhong,Sun Weiming,Li Chunyan,Chen Jinghua

High-sensitivity detection of trace amounts of c-erbB-2 oncogene was reported to be equal to or surpass the ability of CA 15-3 for early diagnosis and/or follow-up recurrent screening of breast cancer. Therefore, in the current study, by using upconversion nanoparticles (UCNPs), rare earth-doped NaYF 4 :Yb 3+ /Er 3+ as the luminescent labels, a upconversion luminescent (UCL) biosensor based on dual-signal amplification of exonuclease III (ExoIII)-assisted target cycles and long-range self-assembly DNA concatamers was developed for the detection of c-erbB-2 oncogene. The proposed biosensor exhibited ultrasensitive detection with limit as low as 40 aM, which may express the potential of being used in trace analysis of c-erbB-2 oncogene and early diagnosis of breast cancer.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。