SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Zikang Xiong,Huaili Zheng,Yadan Hu,Xuebin Hu,Wei Ding,Jiangya Ma,Yisen Li
Efficient and convenient removal of organic dyes and heavy metals from complex wastewater is still a challenge for human health and ecosystem remediation. Novel adsorbent, Fe 3 O 4 @Carbon@ZIF-8 with specific core-shell structure was synthesized by layer-by-layer self-assembly. The hydrophilic carbonaceous shell acts as both a linker and stabilizer between Fe 3 O 4 and ZIF-8. The characteristics of self-made adsorbent were comprehensively identified by numerous characterization methods. The adsorption kinetics, isotherms and the influence of various reacting parameters on its adsorption capacity of Congo red (CR) and Cu(II) were systematically investigated. Compared with other reported adsorbents, the maximum adsorption capacities of Fe 3 O 4 @Carbon@ZIF-8 towards CR (806.45 mg g −1 ) and Cu(II) (234.74 mg g −1 ) were much higher. Moreover, the adsorption process followed pseudo-second-order kinetics and Langmuir isotherm models. Selective adsorption of CR was investigated in the presence of cationic and anionic dyes, and the same as Cu(II) in the existence of competitive ions, which revealed that it was appropriate for selective adsorption toward CR and Cu(II) in complex wastewater. On the basis of FT-IR and XPS analyses, electrostatic interaction, hydrogen bonding, π-π bonding and ion exchange were involved in the mechanism of adsorption. Fe 3 O 4 @Carbon@ZIF-8 is suitable for practical application because of its good stability and reusability.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Jiangyong Liu,Rongfei Ye,Jie Shi,Haiyang Wang,Lixia Wang,Panming Jian,Dan Wang
The state-of-the-art of the catalysis area prefers the construction of highly efficient, stable and low-cost catalysts based on facile and green synthesis procedures with biomass as the precursor. In this respect, we report the preparation of uniform Cu nanoparticles embedded nitrogen–doped carbon catalyst assisted by the carbonization of cushaw and Cu salt without additional reagents. Among the series of catalysts, the one pyrolized at 800 °C is a promising candidate for the liquid-phase reduction of nitrobenzene (NB) in the presence of NaBH 4 , showing superior reactivity and robust stability. Both experimental studies and DFT calculations reveal the strong mutual interaction between Cu nanoparticles and neighboring carbon layer accompanied by the interfacial electron transfer and generation of Cu-N x species. This plays a key role in boosting the adsorption and activation of NB molecules. This study provides new insights for the high-value use of abundant and cheap biomass in advanced catalysis, and sheds light on the interfacial catalysis in driving the NB reduction reaction and beyond.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2021
·
IF 10.588
Zhuo-Rui Jiang,Yuxin Li,Deyun Zhang,Yu-Xiao Zhou,Genbao Xu,Changhua Wang,Yeqing Lan,Jing Guo
Arsenite (As(III)) is more toxic and difficult to remove than arsenate (As(V)). In this study, an S-doped Cu-La bimetallic oxide (S-CuLaO) decorated with metal-organic framework (MOF) composite (S-CuLaO@UIO-66) was synthesized and applied for the adsorption of As(III). The maximum adsorption capacity of As(III) by S-CuLaO@UIO-66 was as high as 171 mg/g, which was much higher compared with other MOF compounds reported to date. The UIO-66 support improved the dispersion and reduced the size of the S-CuLaO particles, which increased the number of exposed adsorption reactive sites. Study of the mechanism revealed that the synchronous oxidation and adsorption significantly increased the removal of As(III). O 2 ∙ - was produced by the receiving electron from the dissolved oxygen from Cu(I) in S-CuLaO, which converted As(III) to As(V). Furthermore, the stability and reusability S-CuLaO@UIO-66 (without regeneration) was investigated at a low As(III) concentration (approximately 1000 µg/L) in deionized water and well water. The residual arsenic concentration ranged from 0.8 to 2.8 μg/L in deionized water and 3–58.2 μg/L in well water within 240 min during three cycles. Generally, this study suggests that combining an optimal oxide with a stable MOF is a promising approach for the fabrication of composite adsorbents.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 34
·17800-17807
·
IF 11.301
Hao Zhang,Jie Hao,Xia Yu,Jianqiao Wu,Jiawei Li,Min-Hui Li,Jun Hu
Thermogels are one kind of smart materials, characterized by the in situ sol–gel transition upon temperature increase. Currently, most of them are constructed using thermosensitive polymers, which often require tedious chemical synthesis. Besides, it is difficult to precisely control the gel properties through remote stimuli like near-infrared (NIR) light. In this work, we have prepared a thermogel with inherent NIR photothermal responsive features by simply mixing hydrophilic polyvinyl alcohol (PVA) with Cu(OAc)2 in deionized water. Without the incorporation of extra reagents and the chemical modification of PVA, the PVA/Cu(OAc)2 thermogel exhibited high photothermal conversion efficiency and reversible sol–gel transition behavior. Because of the inherent NIR absorption and optical conversion abilities, the PVA/Cu(OAc)2 thermogel can be used as a smart window material to effectively absorb sunlight and prevent the rise of indoor temperature. In addition, its photosensitive conductivity also gave it the potential to act as a photoresistor. As far as we know, this is the first PVA-tailored thermogel with an inherent NIR light response, which provides an innovative strategy to construct smart materials.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2020
·
IF 1.943
Rui Shi,Zhijuan Zhang,Fang Luo
Due to environmental pollution caused by organic pollutants, there is an urgent need to develop renewable and environmentally friendly energy sources. In this study, N-doped graphene-based CuO/WO 3 /Cu photocatalyst (CuO/WO 3 /Cu@CN) was prepared for degrading organic pollutants by using Cu(salen)PW 12 complex as the precursor and GO as the substrate. The CuO/WO 3 /Cu@CN photocatalyst not only solved the problem that CuO/WO 3 heterojunction easily expands into powder and causes poor recyclability, but also effectively promoted the separation of photoinduced e - and h + and inhibited their recombination. The catalyst can effectively catalyze the decomposition of 4-nitrophenol, and the cycle test confirmed that it has good cycle stability. Under UV–Vis light irradiation, CuO/WO 3 /Cu@CN can effectively degrade four kinds of organic dyes and the mechanism of photocatalytic degradation of organic dyes was deduced. It is worth noting that N-doped graphene regulates the band-gap of the material, leading CuO/WO 3 /Cu@CN to generate hydrogen in the photocatalytic process. This study is expected to provide a promising way for effective degradation of organic pollutants.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Jia Wen,Xiaohong Hu
Recently, the developments of MOFs and their applications on heavy metal removal have attracted much attention. In this paper, we focused on the influence of co-existing ions on the adsorbability of epigallocatechin gallate (EGCG) modified ZIF-8 in a multi-metal system (Cd(II), Cu(II), Ni(II), and Cr(VI)). It was found that the adsorption of Cd(II), Cu(II), Ni(II), and Cr(VI) on the ZIF-8-EGCG fitted well with the pseudo second-order kinetic model and Langmuir isotherm. The adsorption selectivity of ZIF-8-EGCG in the mixed metal solution followed the order of Cu(II) ≫ Cr(VI) > Cd(II) > Ni(II). Besides, Cu(II) was the most attractive substance with a maximum capacity of 232.97 mg·g −1 . Copper also disturbed the adsorption of Cd(II) and Ni(II) and contributed the most to the Cr(VI) removal. The natural anions (e.g., Cl − , NO 3 – , AsO 2 − , SO 4 2− ) significantly impeded Cr(VI) adsorption, while low concentrations of natural cations (e.g., K + , Na + , Ca 2+ , and Mg 2+ ) facilitated the adsorption of Cd(II), Cu(II) and Ni(II).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2020
·
IF 5.065
Xiang Meng,Rui Hu
Nitrogen/phosphorus enriched biochars with enhanced porosity were prepared through a one-step pyrolysis of bamboo sawdust activated by guanidine phosphate (GP). The thermal decomposition of GP released alkaline gas and hydrogen proton to create more micropores in biochar matrix which were extended to be mesopores further. Nitrogenous/phosphorous moieties of GP were introduced into biochars efficiently via cross-linking with the carbon skeleton. GP-activated biochar pyrolyzed at 450 °C exhibited enriched surface functional groups (11.3 at.% for N, 4.1 at.% for P), resulting in high sorption capacities for aquatic Pb(II) (166.2 mg/g), Cu(II) (81.7 mg/g), and Cd(II) (60.3 mg/g). Pb(II) was passivated fast with the formation of minerals including Pb 5 (PO 4 ) 3 OH and Pb 5 (PO 4 ) 3 Cl. Cu(II) was strongly coordinated with the N-containing species especially pyridinic N. Cd(II) was also captured efficiently due to the chemical complexation, cation exchange and cation-π bonds. GP-activated biochars could be well-recycling used to capture these heavy metals. Regarding these, the activation of biomass residuals could be an efficient approach to functionalize the surface of biochars with enhanced porosity, which is great benefiting for the immobilization of heavy metals from contaminated water.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2020
·Vol. 12
·期 26
·14259-14266
·
IF 6.895
Yi Guan,Nan Li,Yongliang Li,Lingna Sun,Yuan Gao,Qianling Zhang,Chuanxin He,Jianhong Liu,Xiangzhong Ren
Bottom-up construction of transition copper–nitrogen–carbon (Cu–N–C) electrocatalysts with high-performance and long-term durability for the oxygen reduction reaction (ORR) still remains a great challenge. Herein, we propose a temperature-controlled synthesis strategy with confinement effect for fabrication of a novel two-dimensional dual-metal (Cu/Zn) zeolitic imidazolate framework material, which presents an ultrathin nanosheet morphology after high-temperature thermal treatment (denoted as Cu–N-UNS). By controlling the reaction temperature as well as regulating the ratio of metal ions and taking advantages of the confinement effect of surfactants, the rationally designed ultra-thin carbon layer not only prevents aggregation of transition Cu particles and avoids direct contact with reactants and electrolyte solutions to enhance the durability of electrocatalysts, but also shortens the electronic transmission path between the active transition metal species and carbon surface. Therefore, the electrocatalyst exhibits excellent electrocatalytic performance for the ORR (E1/2 ≈ 0.898 V), which is superior to those of state-of-the-art benchmark noble-metal electrocatalysts. Moreover, the even distribution of Cu–N–C and existence of N–Cu2+–Cu0 active sites make a great contribution to the electrocatalyst activity. Notably, the Cu–N-UNS used as air electrodes for Zn–air batteries also exhibits a high peak power density of ≈134.7 mW cm−2 at a current density of ≈231.9 mA cm−2 with remarkable durability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Molecular Catalysis
·
2020
·
IF 3.687
Jingyi Yang,Yanping Fan,Zhong-Li Li,Zhikun Peng,Jing-He Yang,Baozhong Liu,Zhongyi Liu
Herein, we reported an effective method to synthesis a series of supported bimetallic Pd-M/SiO 2 (M = Pt, Ni, Cu, Co) catalysts with highly exposed and well-alloyed nanoparticles via simultaneous strong electrostatic adsorption (co-SEA), which controlled metal precursors strongly anchored onto the oppositely charged support (SiO 2 ) by changing the pH relative to the surface point of zero charge (PZC). The toluene and benzene hydrogenation were used as probe reactions to evaluate the catalytic hydrogenation activity performance of the Pd-M/SiO 2 catalysts. Compared to the catalysts synthesized by the common technique simultaneous dry impregnation (co-DI), the co-SEA Pd-Ni/SiO 2 catalyst exhibited the highest turnover frequencies (TOFs) of 3.7 s −1 for benzene hydrogenation and 3.2 s −1 for toluene hydrogenation. This was attributed to the large amount of electron-deficient Pdδ + sites on the surface of SEA Pd-M/SiO 2 that easily for electron-rich benzene and toluene to adsorb. Besides, the co-SEA catalysts produced well stability and reusability without significant decrease in the catalytic activity after six runs.
✓ 已验证
产品关联
DOI
高影响因子
Biomass Conversion and Biorefinery
·
2021
·Vol. 13
·期 9
·8277-8286
·
IF 4.987
Wang Dongmei,Luo Weiye,Zhu Jingyi,Wang Tengfei,Gong Zhengjun,Fan Meikun
In this study, a novel alkali-modified biochar prepared from ginkgo leaves was produced by simply one-step pyrolysis and was investigated as an adsorbent for the removal of Pb, Cd, and Cu from aqueous solutions. After modified by alkali, ginkgo leaves biochar exhibited abundant surface functional groups and large porosity, resulting in high adsorption capacities for Pb (589.32 mg·g −1 ), Cd (563.55 mg·g −1 ), and Cu (81.7 mg·g −1 ). Simulation results showed that pseudo-second-order model and Langmuir model were better fitted to analyze the heavy metals adsorption process by alkali-BC, indicating that multilayer adsorption was the main reason for heavy metals removal. Besides, effect of pH and coexisting cations on adsorption of Pb, Cd, and Cu by alkali-BC was studied. Moreover, competitive adsorption of the three heavy metal ions by alkali-BC in binary system was also explored. Finally, the removal mechanism of Pb, Cd, and Cu in aqueous solution was analyzed and summarized. Due to the good performance in a wider pH range and high absorption capacity, alkali-BC would be an efficient adsorbent for heavy metals in real environmental samples.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2021
·
IF 4.539
Jiaojiao Cao,Yubo Lian,Huatao Weng,Zhenyu Chen
The effect of an external DC electric field on the inhibition behavior of Zn-MOFs in 0.5 mol/L NaCl solution for copper was investigated via electrochemical measurements and various characterization techniques. Results indicated that the corrosion inhibition efficiency of the Zn-MOFs decreased under strong electric field intensities, which went from 94.2% to 61.7%. The corrosion inhibition efficiency of the materials decreased with increasing electric field duration when maintained at a certain electric field intensity. When the electric field duration time was 6 h, 12 h, 18 h and 24 h, the corresponding efficiency was 90.4%, 86.8%, 78.2% and 61.7% respectively. The effect of an electric field on the corrosion inhibition performance of the Zn-MOFs could essentially be attributed to changes in the structure of the material framework.
✓ 已验证
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2021
·
IF 4.821
Shan Luo,Yuanyuan Wang,Xianwen Kan
Ratiometric electrochemical sensing provides a new perspective for the accurate and reliable detection of different analytes since inner reference signal can effectively eliminate the internal and external interferences. There is still a challenge to explore new inner references for the development of ratiometric electrochemical sensing. Herein, a kind of redox-active metal-organic frameworks (Cu-THQ MOFs) was synthesized and characterized by scanning electron microscope, transmission electron microscope, X-ray powder diffractometer, and X-ray photoelectron spectroscopy techniques. Cu-THQ MOFs were composited with carboxylic group functionalized multi-walled carbon nantubes (MWCNTs-COOH) to construct a sensitive electrochemical sensor. The modified Cu-THQ MOFs not only showed good catalytic active to dopamine (DA), but also displayed the constant peak current with the increase of concentration of DA. And a separated oxidation peak potential of about 270 mV between DA and Cu-THQ MOFs can be observed. Accordingly, a current ratio ( i DA /i MOFs ) was employed as readout signal for DA detection with a linear range and limit of detection of 3.0 × 10 −7 – 4.0 × 10 −5 mol/L and 2.6 × 10 −8 mol/L, respectively. Compared with single signal of i DA , ratiometric strategy exhibited high accuracy and reliability for DA determination. The present ratiometric sensing strategy using MOFs as the inner reference may provide a new choice for future development of electrochemical sensors for other analytes reliable determination.
✓ 已验证
产品关联
DOI
高影响因子