文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3901至3912个,产品总数4,590个

切换升序
C
Nanoscale · 2017 ·Vol. 9 ·期 13 ·4508-4515 · IF 7.367

Yolk–shell nanostructured Fe3O4@C magnetic nanoparticles with enhanced peroxidase-like activity for label-free colorimetric detection of H2O2 and glucose

Na Lu,Min Zhang,Lei Ding,Jing Zheng,Caixia Zeng,Yanli Wen,Gang Liu,Ali Aldalbahi,Jiye Shi,Shiping Song,Xiaolei Zuo,Lihua Wang

Herein, we have developed a simple and facile method to synthesize yolk–shell nanostructured Fe3O4@C nanoparticles (NPs) as a multifunctional biosensing platform for the label-free colorimetric detection of H2O2 and glucose. It was demonstrated that Fe3O4@C yolk–shell nanostructures (YSNs) retained the magnetic properties that can be used for separation and concentration. Also importantly, the Fe3O4@C YSNs exhibited an intrinsic peroxidase-like activity that could quickly catalyze the enzyme substrate in the presence of H2O2 and produce a blue color. Compared to other similar ferric oxide-based NPs with different structures, Fe3O4@C YSNs exhibited greatly enhanced catalytic activities due to their unique structural features. Moreover, steady-state kinetics indicated the catalytic behaviors in agreement with the classic Michaelis–Menten models. Taking advantage of the high catalytic activity, Fe3O4@C YSNs were employed as novel peroxidase mimetics for label-free, rapid, sensitive, and specific colorimetric sensing of H2O2 and glucose, suggesting that Fe3O4@C YSNs have the potential for construction of portable sensors in the application of point-of-care (POC) diagnosis and on-site tests.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2025 · IF 5.6

Ablation resistance of (Hf, Ta)B2-(Hf, Ta)C-SiC ceramics: boride and carbide phase contents significantly affecting the ablation behaviour

Huan Guo,Bingzhu Wang,Ruifeng Li,Hongrui Wang,Jixiang Dai,Yong She,Yongzhong Zhao,Jianjun Sha

In order to elucidate the synergistic mechanism of boride and carbide phase in ultrahigh-temperature ceramics (UHTCs) under ablation condition, in this work, the ablation behaviour of (Hf, Ta)B 2 -(Hf, Ta)C-SiC ceramics with different (Hf, Ta)B 2 to (Hf, Ta)C molar ratios was systematically investigated by oxygen-acetylene test under a heat flux of 3.2 MW/m 2 . It was found that the oxides generated from (Hf, Ta)B 2 and (Hf, Ta)C enhanced the matching capacity of oxides with different melting points, being formed a dense ablation layer. When the molar ratio of (Hf, Ta)B 2 to (Hf, Ta)C was 2:1, the ceramic achieved a near-zero ablation rate (0.042 μm/s), which was 1.62 times lower than that of (Hf, Ta)C-SiC ceramics. The mechanism for the enhanced ablation resistance was attributed to the Hf 6 Ta 2 O 17 generated during the ablation reaction, which reduced the viscosity of the ablation products and infiltrated into the pores of ceramics. The formation of such ablation layer could inhibit the impregnation of oxygen and the depletion of easily volatile oxides, including SiO 2 and B 2 O 3 , being formed a multi-element composite ablation layer with self-healing ability, which was helpful for the protection of the substrate from continuous oxidation damage.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2020 · IF 4.65

Unique FeP@C with polyhedral structure in-situ coated with reduced graphene oxide as an anode material for lithium ion batteries

Yingde Huang,Rongtian Yu,Gaoqiang Mao,Wanjing Yu,Zhiying Ding,Yanbing Cao,Junchao Zheng,Dewei Chu,Hui Tong

Iron phosphide as anode material for lithium ion batteries (LIBs) attracts a lot of attention because of large theoretical capacity. Nevertheless, the inherent disadvantages of huge volume expansion and low electrical conductivity inhibit its further application. In this work, FeP@C/reduced graphene oxide (rGO) anode material with unique polyhedral structure was synthesized by a simple solvothermal and low temperature phosphiding method. Metal organic framework MIL-101(Fe) was used as the precursor and anchored on the surface of graphene oxide (GO). The organic ligand of MIL-101(Fe) was transformed to polyhedral carbon skeleton, which combined with GO to form a three-dimensional conductive network that provides efficient channels for electrons and ions, and attenuates volume expansion during the insertion/extraction of lithium ions , and avoids partial pulverization and improves cycle stability. The optimized FeP@C/rGO anode material showed a discharge capacity of 414.7 mAh g −1 at the current density of 8 A g −1 , and reached a capacity of 949.7 mAh g −1 after 100 cycles at 0.1 A g −1 ; even cycled at the current density of 1 A g −1 , it provided a capacity of 737.7 mAh g −1 after 450 cycles. In virtue of ingenious microstructure design and structural optimization, FeP@C/rGO exhibited outstanding electrochemical properties in LIBs.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2017 · IF 7.504

Investigation of the Reversible Intercalation/Deintercalation of Al into the Novel Li3VO4@C Microsphere Composite Cathode Material for Aluminum-Ion Batteries

Jiali Jiang,He Li,Jianxing Huang,Kun Li,Jing Zeng,Yang Yang,Jiaqi Li,Yunhui Wang,Jing Wang,Jinbao Zhao

The Li3VO4@C microsphere composite was first reported as a novel cathode material for rechargeable aluminum-ion batteries (AIBs), which manifests the initial discharge capacity of 137 mAh g–1 and and remains at 48 mAh g–1 after 100 cycles with almost 100% Coulombic efficiency. The detailed intercalation mechanism of Al into the orthorhombic Li3VO4 is investigated by ex situ X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) of Li3VO4@C electrodes and the nuclear magnetic resonance aluminum spectroscopy (27Al NMR) of ionic liquid electrolytes in different discharge/charge states. First-principle calculations are also carried out to investigate the structural change as Al inserts into the framework of Li3VO4. It is revealed that the Al/Li3VO4@C battery goes through electrochemical dissolution and deposition of metallic aluminum in the anode, as well as the insertion and deinsertion of Al3+ cations in the cathode in the meantime. The rechargeable AIBs fabricated in this work are of low cost and high safety, which may make a step forward in the development of novel cathode materials based on the acidic ionic liquid electrolyte system.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2014 · IF 5.211

Monodisperse porous LiFePO4/C microspheres derived by microwave-assisted hydrothermal process combined with carbothermal reduction for high power lithium-ion batteries

Rongrong Chen,Yixiong Wu,Xiang Yang Kong

A microwave-assisted hydrothermal approach combined with carbothermal reduction has been developed to synthesize monodisperse porous LiFePO 4 /C microspheres , which possess the diameter range of 1.0–1.5 μm, high tap density of ∼1.3 g cm −3 , and mesoporous characteristic with Brunauer–Emmett–Teller (BET) surface area of 30.6 m 2  g −1 . The obtained microspheres show meatball-like morphology aggregated by the carbon-coated LiFePO 4 nanoparticles . The electrochemical impedance spectra (EIS) results indicate that carbon coating can effectively enhance both of the electronic and ionic conductivities for LiFePO 4 /C microspheres. The Li-ion diffusion coefficient of the LiFePO 4 /C microspheres calculated from the cyclic voltammetry (CV) curves is ∼6.25 × 10 −9  cm 2  s −1 . The electrochemical performance can achieve about 100 and 90 mAh g −1 at 5C and 10C charge/discharge rates, respectively. As cathode material , the as-prepared LiFePO 4 /C microspheres show excellent rate capability and cycle stability, promising for high power lithium-ion batteries.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RARE METALS · 2024 ·Vol. 43 ·期 6 ·2623-2635 · IF 9.6

Improvement in hydrogen storage performance of MgH2 by vanadium doped with ZIF-8 derived a single-atom catalyst V–N–C

Hong Fei-Fan,Shi Wei-Tao,Zhao Ruo-Lin,Fan Yi,Liu Zi-Qi,Ding Si-Zhi,Liu Hai-Zhen,Zhou Wen-Zheng,Guo Jin,Lan Zhi-Qiang

Herein, the successful preparation of a single-atom catalyst V–N–C using vanadium-doped zeolitic imidazolate framework (ZIF)-8 as a precursor is reported. The experimental results showed that the V–N–C had a good promoting effect on the hydrogen storage performance of MgH 2 , and the optimal addition amount of V–N–C was 10 wt%. The hydrogenation and dehydrogenation apparent activation energies of 10 wt% V–N–C-catalyzed MgH 2 were reduced by 44.9 and 53.5 kJ·mol −1 , respectively, compared to those of additive-free MgH 2 . The 10 wt% V–N–C-catalyzed MgH 2 could reabsorb 5.92 wt% of hydrogen in 50 min at 150 °C, with a capacity retention rate of 99.1% after 30 cycles of hydrogen absorption and desorption. Mechanism analysis showed that V–N–C was partially transformed into VN and metallic V when it was milled with MgH 2 ; the in-situ-formed VN and metallic V played an important role in improving the hydrogen storage performance of MgH 2 . This approach provides a potential solution for obtaining high-performance Mg-based hydrogen storage materials through synergistic interactions between V, N and C. Graphical abstract

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2013 · IF 3.777

Synthesis of porous tubular C/MoS2 nanocomposites and their application as a novel electrode material for supercapacitors with excellent cycling stability

Bingling Hu,Xiaoyun Qin,Abdullah M. Asiri,Khalid A. Alamry,Abdulrahman O. Al-Youbi,Xuping Sun

The present communication reports on the first preparation of porous tubular C/MoS 2 nanocomposites using porous anodic aluminum oxide as a template. We further demonstrate the application of such composites as a novel electrode material for supercapacitors . It is found that they can deliver a high capacitance of 210   F/g at 1   A/g and exhibit excellent long-term cycling stability over 1000 cycles.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nanoscale · 2019 ·Vol. 11 ·期 20 ·9906-9911 · IF 6.97

Gram-scale fabrication of Bi@C nanoparticles through one-step hydrothermal method for dual-model imaging-guided NIR-II photothermal therapy

Wenyao Zhen,Shangjie An,Wei Wang,Yang Liu,Xiaodan Jia,Chao Wang,Mengchao Zhang,Xiue Jiang

At present, increasing attention is being paid to photothermal therapy corresponding to the second near infrared (NIR-II) range (1000–1700 nanometers); however, its biomedical applications related to carbon-based nanomaterials (CNMs) have always been limited by the large-scale fabrication of excellent diagnostic probes with a suitable size and optical absorption cross-section. Herein, we successfully prepared Bi@C nanoparticles with a suitable size and high output (3.14 g per patch) through a one-pot hydrothermal method. By combining Bi with carbon, the optical absorption in the NIR-II range was enhanced compared to that for single carbon; moreover, Bi@C could no longer be easily oxidized due to the protection of outer C compared with individual Bi. Furthermore, because of the high atomic number of Bi (Z = 83), the Bi@C nanoparticles exhibited computed imaging contrast properties. According to the in vitro and in vivo experiments, the Bi@C nanoparticles could ablate cancer cells under illumination with a 1064 nm laser with deeper penetration and an appropriate permissible exposure (MPE) to the laser (1 W cm−2), showing excellent performance for the diagnosis and treatment of tumors. This study provides a simple method to synthesize metal–carbon nanocomposites to enhance the NIR-II optical absorption efficiency for effective deep-seated tumor photothermal therapy and will further broaden the applications of CNMs.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2018 · IF 3.779

An extra-long-life supercapacitor based on Co3O4/NiCo2O4/NiO/C&S composite by decomposition of Co/Ni-based coordination complex

Shan Yan,Lina Xu,Jun Jiang,Hongping Xiao,Xinhua Li

Single-material electrodes do not satisfy the demands of high-performance supercapacitors. To exploit the advantages of both oxides and carbon-based materials, a tightly packed Co 3 O 4 /NiCo 2 O 4 /NiO/C&S nanocomposite is fabricated by sintering a Co/Ni-based coordination complex precursor at 400 °C. The composites and basic components are characterized using various techniques, namely, X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy , Brunauer–Emmett–Teller specific surface area analysis, and elemental analysis . The electrochemical performance is analyzed by cyclic voltammetry , galvanostatic charge/discharge cycling, and electrochemical impedance spectrometry . A uniform nanocomposite was found to be formed of NiCo 2 O 4 , NiO, and Co 3 O 4 nanoparticles , incompletely carbonized C, and incompletely vulcanized S. When used as supercapacitor electrodes, the synthesized composites show extra-long cycling stability (>20,000 cycles) during the charge/discharge process. This improvement in the cycle life of the composites is attributed to its highly stable structure. The roles of C and S in forming a stable structure are investigated. The results show that a supercapacitor with electrodes made from the as-prepared Co 3 O 4 /NiCo 2 O 4 /NiO/C&S composite will be promising for commercial applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2019 · IF 7.467

Templated growth of Fe/N/C catalyst on hierarchically porous carbon for oxygen reduction reaction in proton exchange membrane fuel cells

Yunfeng Zhan,Hongbin Zeng,Fangyan Xie,Hao Zhang,Weihong Zhang,Yanshuo Jin,Yueli Zhang,Jian Chen,Hui Meng

This work reports a rational design of non-precious metal catalyst for oxygen reduction reaction in acidic media to be used in polymer electrolyte membrane fuel cell. A strategy is designed to avoid the agglomeration of metal compound during the pyrolysis of precursor. MgO template is introduced into a 1-10-phenanthroline-iron (II) precursor to promote the evolution of Fe-Nx active sites while avoiding the formation of inactive species. The template also contributes to the formation of micro/mesoporous structure. The as-prepared catalyst shows good performance in half-cell test with half-wave potential of 0.80 V in acidic media. The catalyst reaches a current density of 0.76 A cm −2  at 0.6 V iR-free along with encouraging durability in H 2 –O 2 fuel cell test.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Chemistry · 2021 ·Vol. 2021 ·期 1 ·5685596 · IF 2.506

A New (3, 6)-Connected Heterometallic Coordination Polymer: Therapeutic and Protective Effect on Ischemic Cerebral Infarction

Jia Ma,Jianer Wang,Yuping He,Yiwei Huang,Yejun Chen

Solvothermal reaction of 4,4’,4’-nitrilotribenzoic acid (H 3 TCA) with Ca(NO 3 ) 2 ·4H 2 O and Cd(NO 3 ) 2 ·4H 2 O successfully afforded a heterometallic compound, that is, [Cd 2 Ca(TCA) 2 (DMA) 2 (H 2 O) 3 ] n ·2n(DMA) ( 1 , DMA = N,N’-dimethylacetamide). The structure of 1 was further characterized through EA, diffraction of single crystal X-ray, and thermogravimetric analysis (TGA) together with powder X-ray diffraction (PXRD). Moreover, complex 1 ’s luminescent performance in solid state was also discussed at environmental temperature. The applications on the ischemic cerebral infarction therapy were evaluated, and the specific mechanism was investigated at the same time. Firstly, the hypersensitivity C-reactive protein (hs-CRP) content in human brain microvascular endothelial cell (HBMEC) was measured with real-time reverse transcription-polymerase chain reaction (RT-PCR). Then, interleukin-18 and interleukin-1 β content released through the HBMEC was detected with enzyme-linked immunosorbent assay (ELISA).

研究领域: 生物无机化学 · 神经药理学 · 炎症生物学 · 转化医学 · 分子影像学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ELECTROANALYTICAL CHEMISTRY · 2026 · IF 4.6

Metastable Fe-Co/NC electrocatalysts engineered by ultrafast 500 °C Joule-heating: a break from the high-temperature paradigm for superior ORR

Yu Wang,Danyang Wu,Jiao wu,Xizhen Zhang,Yongze Cao,Baojiu Chen

We breakthrough the conventional high-temperature paradigm for synthesizing transition metal catalysts by discovering 500 °C as a critical metastable window in ultrafast (>1500 °C/s) Joule heating synthesis. This kinetically confined thermal shock at precisely 500 °C uniquely terminates metal aggregation while locking abundant pyridinic-N sites (2.86 at.%) that effectively anchor highly dispersed Fe and Co species, simultaneously sculpting a defect-rich carbon matrix. This unique combination, inaccessible in traditional pyrolysis, unlocks exceptional synergistic activity. Consequently, the 500 °C-engineered NC-FeCo catalyst achieves an oxygen reduction record: half-wave potential (0.92 V) surpassing Pt/C (0.85 V) and 1500 °C-treated analogs (0.85 V), while delivering near-theoretical 4e − selectivity (<1.2% H₂O₂), negligible decay (ΔE = 3 mV/5000 cycles), and superior methanol tolerance. Our work establishes sub-second 500 °C thermal shock as an innovative platform for metastable dual-metal electrocatalysis.

CAS / MDL: 132-16-1 7791-13-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。