文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3901至3912个,产品总数8,185个

切换升序
LIGHT
SEPARATION AND PURIFICATION TECHNOLOGY · 2026 · IF 9.1

A light-trapping conical TaN-PPy photothermal evaporator with convection-driven salt rejection for sustainable solar desalination

Muneerah Alomar,Lamia Abu El Maati,Muhammad Sultan Irshad,Naila Arshad,Afraa Alotaibi,Naveed Mushtaq,Van-Duong Dao

The water scarcity crisis in the developing world creates an immediate need for cost-effective, environmentally friendly water treatment methods. Interfacial solar evaporation is one of the promising ways of dealing with this problem using renewable solar energy. The challenge associated with this field is developing an advanced photothermal absorber with capabilities for wide-bandgap solar absorption, efficient water–air interface thermal management, fast capillary water transport, and good stability. Herein, we introduce a cone-shaped photothermal evaporator device based on a combination of plasmonic tantalum nitride (TaN) nanoparticles and a conducting polypyrrole (TaN-PPy) nanocomposite on a hydrophilic cotton surface. The TaN nanoparticles possess a high possibility of absorbing a wide wavelength of light based on localized surface plasmon resonance effects, and the PPy network can support charge transfer, improve interface stability and allow for simple device production by a spray-coating technique. Such a synergistic design leads to a highly efficient evaporation setup. Under 1 sun irradiance of 1 kW m −2 , an excellent evaporation rate of 1.8 kg m −2  h −1 and a high solar-to-vapor conversion efficiency of 84% are obtained for the optimized TaN-PPy fabric. Moreover, it displays high stability in a continuous testing setup and efficiently desalinates simulated seawater, with a reduction in salinity above 99.9%. This work provides a practical and scalable design for efficient, long-term solar desalination and wastewater treatment.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Photonics · 2026 · IF 6

Dynamic Self-Regulation Strategy for Suppressing Efficiency Roll-Off in High-Brightness Quantum Dot Light-Emitting Devices

Haiyan Lin,Weibin Lin,Chao Zhong,Tao Chen,Kuibao Yu,Zhihan Lin,Yongshen Yu,Fushan Li,Hailong Hu

Efficiency roll-off of quantum-dot light-emitting devices (QLEDs) at high brightness severely impedes their commercialization, which is mainly attributed to the difficulty in regulating excessive and imbalanced carrier injection under varying electric fields. In this study, a dynamic self-regulation strategy responsive to external electric fields is proposed, which is realized by integrating nematic liquid crystal molecule 5CB into the electron transport layer. The reorientation of 5CB, triggered by the applied bias, generates a built-in electric field that dynamically modulates electron transport in real time, enabling balanced charge carriers during dynamic operation. As a result, the self-regulated QLEDs achieve a peak external quantum efficiency (EQE) of 26.04% and demonstrate ultrastable efficiency retention, maintaining an EQE of 25.37% even at an extremely high brightness of 100,000 nits. This work offers a novel approach for dynamic control of carriers, paving the way for the development of high-performance QLEDs with outstanding stability.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2026 · IF 6.6

BTP-4F modified CsPbBr3 quantum dots: enhancement of photoluminescence stability under UV, red light, and ambient conditions

Yiting He,Xiayu Zhu,Ajun Li,Shuyuan Lin,Bo Li,Songbin Liu,Wei Wang,Chuanli Wu,XinYu Ye

CsPbBr 3 perovskite quantum dots (PQDs) possess exceptional optoelectronic properties, such as tunable bandgap and narrow emission linewidth, which underscore their significant potential for optoelectronic devices. However, their practical application is substantially hindered by surface defects, notably uncoordinated Pb 2+ ions, which result in low photoluminescence quantum yield (PLQY) and poor environmental stability. Non-fullerene small molecules have been proven to enhance the efficiency and stability of solar cells. In this work, the non-fullerene molecule BTP-4F was introduced into CsPbBr 3 PQDs, and the mechanism by which BTP-4F influences the stability of QDs under different irradiation conditions was thoroughly investigated. The findings reveal that BTP-4F effectively passivates surface defects by coordinating with undercoordinated Pb 2+ ions, thereby suppressing non-radiative recombination and improving the optical performance of the PQDs. Notably, the BTP-4F significantly inhibits photo-induced degradation and lattice distortion under both ultraviolet and red-light irradiation, presenting a synergistic optimization of PL and stability of the PQDs. The optimized QDs were successfully applied in high-color-rendering light-emitting diodes (LEDs), demonstrating their practical potential. These results provide experimental support for employing BTP-series molecules in PQD-based devices, particularly solar cells and light-emitting diodes. This advances the goal of unlocking the full potential of PQDs and integrating them into diverse optoelectronic applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2026 · IF 3.8

Sr8ZnSc(PO4)7:Eu2+,Hf4+: A Novel Single-Host White Light-Emitting Phosphor Based on Defect Engineering

Yuqian Zheng,Ziwang Zhang,Zhuo Li,Deqiang Liu,Huaiyu Wu,Junhui Liang,Enxi Song,Jianxin Shi,Jing Wang

Single-host white light-emitting phosphors have been one of the research hotspots in the field of white light-emitting diodes (WLEDs) in recent years. Herein, white light emission is realized in Sr 8 ZnSc(PO 4 ) 7 :Eu 2+ phosphor by using the defect engineering strategy, i.e. the heterovalent substitution of Sc 3+ with Hf 4+ . Based on the charge compensation mechanism of the substitution, electron paramagnetic resonance (EPR) analysis confirms a positive correlation between cation vacancy concentration and dopant content. Photoluminescence spectra indicates that there are two different emissions at 408 and 520 nm in the phosphor. Under 335 nm excitation, the SZSP:0.02Eu 2+ ,0.03Hf 4+ exhibits cold white light emission with CIE coordinates (0.2992, 0.3214) and an enhanced color rendering index (Ra = 80.02), showing superior performance compared to commercial YAG:Ce 3+ phosphor. This work not only elucidates the critical role of Hf 4+ dopants in defect engineering but also establishes a novel material for developing high-efficiency phosphors with tunable color temperature for WLED applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Bio Materials · 2026 · IF 5.6

Visible Light-Activated Photodynamic Therapy Microneedle Arrays with Carbon Dots Modified CuTCPP for Deep Bacterial Infection Treatment

Hai Ren,Ziran Yu,Jian Cheng,Yukai Wang,Xiaoyu Sun,Cheng Wang,Shikuo Li

Photodynamic therapy has attracted significant attention in treating serious bacterial skin infections. Herein, the carbon dots@Cu Tetrakis (4-carboxyphenyl) porphyrin microneedle arrays (CDs@CuTCPP MNs) were prepared by using a 3D printing technology for efficient photodynamic therapy of deep bacterial infected wounds. The CDs decorated on CuTCPP nanosheets facilitated the spatial charge separation for reactive oxygen species generation under irradiation. The CDs as a nanozyme could help to alleviate the local oxidative stress once they power off the light. Importantly, the release of ROS from the microneedle (length about 800 μm) to the deeply infected sites for damaging the bacteria can be achieved in a short time by the dissolution of the hyaluronic acid. As expected, the typical CDs@CuTCPP MNs achieved an average antibacterial rate of more than 95% against Staphylococcus aureus and Escherichia coli under visible-light irradiation (λ ≥ 420 nm). Moreover, during the wound healing evaluation test, the microneedle arrays achieved a remarkably high wound closure rate of 96.8%. The antibacterial mechanism of the CDs@CuTCPP MNs was investigated through reactive oxygen capture experiments, electrochemical characterization, and density functional theory calculations. This work offers a viable, visible light-driven approach for the treatment of deep-seated bacterial infections, highlighting the synergy between charge-decoupling photosensitizers and microneedle-assisted delivery.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Intense Pulsed Light Sintering of Cu@Ag Core-Shell Nanoparticles: Durable Flexible Electrodes and Electroluminescent Visual Feedback

Zhenfeng Li,Yifan Zhao,Zixu Wang,Jinyang Li,Chenglong Zhou,Peng He,Shuye Zhang

Oxidation susceptibility and insufficient service reliability remain major limitations for Cu-based conductive inks in flexible electronics. Here, size-tunable Cu@Ag core-shell nanoparticles were processed by millisecond intense pulsed light (IPL) sintering to establish a rapid route toward conductive and durable flexible electrodes. Comparative finite-element thermal analysis and electrical measurements establish a practical IPL processing window, while electron microscopy and complementary diffraction analysis support energy-dependent interparticle connection and localized Cu-Ag interfacial reconstruction without assuming homogeneous alloying throughout the film. The sheet resistance reaches a minimum of 0.06 Ω/sq at 5.0 J/cm2, whereas 4.5 J/cm2 is selected as the practical baseline because it provides a more favorable balance among conductivity, film integrity, environmental stability, flexibility, adhesion, and limited cumulative substrate heating. Films processed within this window maintain low resistance during damp-heat and cryogenic exposure and exhibit stable electrical behavior during repeated bending. At the device level, the 4.5 J/cm2 electrode enables a contact-separation triboelectric nanogenerators (TENG) with an open-circuit voltage of 275.45 V and a peak power density of 0.71 W/m2. In otherwise identical alternating-current electroluminescent (ACEL) devices, increasing the electrode-processing energy from 1.5 to 4.5 J/cm2 markedly increases luminance, directly linking the IPL-defined electrode state to device performance. The integrated patterned platform further enables tactile-position visual feedback. These results establish an evidence-based processing-thermal response-structure-reliability-device relationship for IPL-sintered Cu@Ag NPs flexible electrodes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2026 · IF 6

Enhanced visible-light photoelectrocatalysis over TiO2 NTs/Cu2O-CuO: Mechanistic insights into charge separation and pollutant degradation

Xinyi Shan,Weiyi Ju,Qingyao Wang,Qian Zhu,Jiarui Chen,Na Liu,Chenchen Jia,Ran Geng,Junjie Qi,Shengwen Liao

Addressing the escalating contamination of aquatic ecosystems by industrial dyes and heavy metals such as Cr(VI), this study presents a novel TiO 2 NTs/Cu 2 O-CuO hybrid photoelectrocatalytic system. By integrating anodic oxidation with a controlled hydrothermal process, Cu 2 O-CuO dual-phase heterojunctions were successfully anchored onto TiO 2 nanotube arrays, establishing a cascade-like band alignment for efficient charge carrier separation. The characterization confirms that the energy band structure-comprising TiO 2 NTs (3.08 eV), Cu 2 O (2.11 eV), and CuO (1.77 eV)-significantly extends visible-light absorption and suppresses the recombination of photogenerated electron-hole pairs. Under combined visible-light irradiation and external bias, the system exhibits superior photoelectrocatalytic performance, achieving removal efficiencies of 96.92% for Congo red (CR), 74.87% for methylene blue (MB), and 93.64% for Cr(VI). Mechanistic insights reveal that the mineralization of pollutants is dominated by a synergistic pathway involving direct hole (h + ) oxidation and superoxide radicals (•O 2 − ) derived from O 2 reduction. Furthermore, an ecological toxicity assessment using Vigna angularis seedlings demonstrates that this photoelectrocatalytic process effectively detoxifies treated wastewater, promoting plant growth and restoring ecological safety. This work provides both a robust design principle for high-performance heterojunction photoanodes and a critical framework for evaluating the real-world environmental safety of water purification technologies.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOM · 2026 · IF 2.3

Optimized Synthesis of Fe2TiO5 Nanoparticles for Efficient and Reusable Visible-Light-Driven Photocatalytic Degradation of Organic Dyes

Zhang Shizhong,Sun Tongming,Ge Ming,Ni Lingli,Bi Lingling,Ali Nisar,Xu Weichuan

Pseudobrookite-type Fe 2 TiO 5 semiconductor nanoparticles were systematically synthesized via a co-precipitation method for the photodegradation of organic pollutants. The dual-level optimization from nanomaterial fabrication to reaction environment tuning enables a rational understanding of the factors governing photocatalytic efficiency. Optimal synthesis conditions were achieved using a 20% excess of Ti 4+ , a pH of 8, one-time ammonia addition, and calcination at 800°C for 6 h. The photocatalyst achieved 99.4% degradation efficiency for methylene blue (MB) under visible light with a 75-mg catalyst dosage, a 10-mg/L MB solution, at pH 6, and the addition of 7 mL H 2 O 2 . The photogenerated electron–hole pairs reacted with surface species to produce ·O 2 − and ·OH that degrade MB molecules oxidatively. The catalyst exhibited versatility and excellent recyclability, maintaining high activity over four consecutive cycles with only a minor decrease in efficiency. This study establishes the optimal synthesis parameters and reaction conditions for Fe 2 TiO 5 nanoparticles in visible-light photocatalysis.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ChemPhotoChem · 2025 · IF 3

MXene-Derived g-C3N5/TiO2/Ti3C2 Nanoheterostructure Activated by Peroxymonosulfate for Photocatalytic Tetracycline Degradation under Visible Light

Yuan Bai,Jie Liu,Weiting Huang,Xintong Shen,Haoyu Zheng,Kexin Hu

Graphical Under visible light, a Z-type heterojunction is formed between Ti 3 C 2 /TiO 2 and g-C 3 N 5 to enhance charge separation. Electrons and holes directly or indirectly react with PMS to generate free radicals such as · ,·OH, and 1 O 2 to degrade tetracycline. Photocatalysis-assisted peroxymonosulfate (PMS) activation is a promising technology for the degradation of antibiotics in water remediation. Herein, MXene-derived oxide (TiO 2 ) and g-C 3 N 5 Z-scheme ternary heterojunction photocatalytic composite materials are synthesized using an electrostatic self-assembly approach and characterized. The optimized g-C 3 N 5 /TiO 2 /Ti 3 C 2 (CNTT) heterostructure demonstrates exceptional photocatalytic activity for tetracycline (TC) removal, achieving 90% degradation within 60 min at an optimal g-C 3 N 5 :TiO 2 /Ti 3 C 2 mass ratio of 3:2. Remarkably, the system exhibits broad pH adaptability (80.8–96.3% TC removal across pH 2–12), overcoming the pH sensitivity limitations of traditional PMS-based processes. Mechanistic investigations reveal a synergistic photocatalysis-PMS activation pathway, with quenching experiments confirming , ·OH, · , and 1 O 2 , as dominant reactive species. The CNTT composite maintains 65.2% degradation efficiency after five cycles, demonstrating robust stability. Coexisting ions negatively influence TC removal in the order: H 2 PO 4 − > > Cl − > > . This work establishes the CNTT heterostructure as a promising, environmentally tolerant candidate for efficient pharmaceutical pollutant remediation in complex aqueous matrices.

CAS / MDL: 13755-29-8 299-11-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2025 · IF 2.5

CO2 hydrogenation to light olefins on ZnO-ZrO2/SAPO-34 tandem catalysts: optimize the Zn/Zr ratio

Yi Xiang,Zidan Mei,Lulu Zhou,Yue Li,Yongdong Chen

The hydrogenation of CO2 to light olefins is a promising method for CO2 resource utilization. Tandem catalysts composed of metal oxides and zeolites have been widely studied for the hydrogenation of CO2 to light olefins, but there are bottleneck problems in terms of CO2 conversion and light olefins yield. ZnO-ZrO2 catalyst is extensively employed in CO2 hydrogenation because of its excellent stability at high temperatures, but there is still a "seesaw" problem between the CO2 conversion and light olefins selectivity. In addition, the synergetic effect between Zn and Zr sites on the reaction process remains unclear. In this work, a series of ZnO-ZrO2 catalytic materials with various Zn: Zr ratios were synthesized by co-precipitation, and the interaction between Zn and Zr could be regulated by altering the Zn: Zr ratio. XRD and TEM results confirmed the successful synthesis of ZnO-ZrO2 composite oxide and the existence of a certain interaction between Zn and Zr. CO2-TPD, H2-TPR and XPS results indicated that the interaction between Zn and Zr could improve the hydrogenation capacity of the catalyst and also induce the generation of abundant oxygen vacancies to effectively promote the adsorption and activation of CO2. Catalytic performance results showed that ZnO-ZrO2(1:4)/SAPO-34 exhibits the best CO2 to light olefins activity with a CO2 conversion rate of 26.4% and a C2=-C4=selectivity of 72.6%. This work provides a feasible strategy for rational designing and optimizing of CO2 hydrogenation catalyst.

CAS / MDL: 112926-00-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials · 2025 ·Vol. 18 ·期 20 ·4705 · IF 3.2

Fabrication of Novel n-n Heterojunction Bi2O2CO3/AgVO3 Photocatalytic Materials with Visible-Light-Driven Photocatalytic Activity Enhancement

Weijie Hua,Huixin Yuan,Songhua Huang

This research successfully synthesized a novel n-n heterojunction Bi2O2CO3/AgVO3nanocomposite photocatalyst via the in situ chemical deposition process. Characterization results strongly confirmed the formation of a tight heterojunction at the Bi2O2CO3/AgVO3interface. The nanocomposite exhibited characteristic XRD peaks and FT-IR vibrational modes of both Bi2O2CO3and AgVO3simultaneously. Electron microscopy images revealed AgVO3nanorods tightly and uniformly loaded onto the surface of Bi2O2CO3nanosheets. Compared to the single-component Bi2O2CO3, the composite photocatalyst exhibited a red shift in its optical absorption edge to the visible region (515 nm) and a decrease in bandgap energy to 2.382 eV. Photoluminescence (PL) spectra demonstrated the lowest fluorescence intensity for the nanocomposite, indicating that the recombination of photogenerated electron–hole pairs was suppressed. After 90 min of visible-light irradiation, the degradation efficiency of Bi2O2CO3/AgVO3toward methylene blue (MB) reached up to 99.55%, with photodegradation rates 2.51 and 2.79 times higher than those of Bi2O2CO3and AgVO3, respectively. Furthermore, the nanocomposite exhibited excellent cycling stability and reusability. MB degradation was gradually enhanced with increasing the photocatalyst dosage and decreasing initial MB concentration. Radical trapping experiments and absorption spectroscopy of the MB solution revealed that reactive species h+and ·O2−could destroy and decompose the chromophore groups of MB molecules effectively. The possible mechanism for enhancing photocatalytic performance was suggested, elucidating the crucial roles of charge carrier transfer and active species generation.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Aggregate · 2025 · IF 13.7

Highly Photoluminescent RGB-Carbon Dots and Their Integration Applications in Light-Emitting Diodes and Luminescent Solar Concentrators

Bin Liu,Genghong Huang,Yaling Wang,Huijie Bai,Suping Jia,Fu-de Ren,Xinghong Zhang

Carbon dots (CDs) have emerged as a promising platform for constructing optoelectronic devices. However, the synthesis of multicolor CDs with high quantum yield (QY) and the elucidation of their luminescence mechanisms remain challenges. Here, we successfully synthesize RGB-CDs by precisely controlling the ratio of o -phenylenediamine and phytic acid. The QYs of the RGB-CDs are up to 60.3%, 68.7%, and 19.0%, respectively. Experimental data and DFT calculations reveal that the fluorescence emission of the RGB-CDs originates from molecule state (5,14-dihydroquinoxalino[2,3- b ] phenazine), carbon core state, and clusteroluminescence state induced by the through-space interactions of heteroatom groups, respectively. Moreover, leveraging the outstanding fluorescence properties of the RGB-CDs, we fabricate both a white light-emitting diode (WLED) with an ultra-high color rendering index of 98 and a luminescent solar concentrator achieving a high power conversion efficiency of 1.6%. Finally, we integrate a self-powered lighting system combining the WLED and LSC, which provides approximately 6 h of continuous illumination to a 0.1 W WLED after a single day's charging. Our results demonstrate a facile method for preparing multicolor CDs with high QYs, enabling their use as phosphor sources for various optoelectronic device applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。