文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3913至3924个,产品总数4,628个

切换升序
8
Food Analytical Methods · 2024 · IF 2.6

Construction of a Nitrogen-Doped Carbon Quantum Dot Fluorescent Molecularly Imprinted Sensor for Ultra-Sensitive Detection of Sulfadiazine in Pork Samples

Yang Wenming,Liu Chenghao,Zhang Baolin,Wu Changchun,Cao Yang,Huang Weihong,Xu Wanzhen

In the realm of food safety, the accumulation and potential health risks posed by persistent residues of broad-spectrum antimicrobials, which degrade slowly in the environment, have prompted the urgent development of efficient and sensitive detection methods. Addressing this challenge, nitrogen-doped carbon quantum dots (N-CQDs) were synthesized through a high-temperature hydrothermal method using citric acid and urea as sources. Utilizing these N-CQDs, a sensor incorporating molecularly imprinted polymers was developed through a sol–gel process with sulfadiazine (SDZ) as the template molecule. This involved using 3-aminopropyltriethoxysilane and tetraethyl orthosilicate as the monomer and cross-linker, respectively. The resulting sensor exhibited a linear detection range of 0 to 30 µmol/L and a notably low detection limit of 0.04 µmol/L. Further testing on actual pork samples revealed recovery rates between 95.10 and 108.30% and a relative standard deviation below 2.0%, emphasizing its high sensitivity and selectivity. This advancement not only enhances SDZ detection capabilities, but also paves the way for broader applications in food safety monitoring, setting a solid foundation for future developments in sensor technology. Graphical Abstract

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CELLULOSE · 2019 ·Vol. 26 ·期 16 ·8625-8643 · IF 3.917

Preparation and thermostability of cellulose nanocrystals and nanofibrils from two sources of biomass: rice straw and poplar wood

Zhao Guomin,Du Jun,Chen Weimin,Pan Mingzhu,Chen Dengyu

Abstract Two types of nanocellulose (cellulose nanocrystals—CNCs and cellulose nanofibrils—CNFs) were isolated from two biomass resources. The morphology, crystallinity and thermal stability of the nanocelluloses were systematically compared in this paper. CNCs derived from rice straw (CNC-Rs) and poplar wood (CNC-Ps) by sulfuric acid hydrolysis had short rod-shaped structures and average diameters of 9.1 nm for CNC-Rs and 11.4 nm for CNC-Ps. CNFs derived from rice straw (CNF-Rs) and poplar wood (CNF-Ps) by grinding had web-network structures and average diameters of 13.3 nm for CNF-Rs and 18.5 nm for CNF-Ps. After freeze-drying, the CNCs and CNFs retained their nano structures. CNFs and CNC-Ps consisted of the typically pure cellulose I , while CNC-Rs consisted of cellulose I and II . The CrI of the nanocellulose followed the order of CNC-Ps (72.9%) > CNC-Rs (68.0%) > CNF-Ps (56.4%) > CNF-Rs (54.4%). The thermal stability of the nanocellulose was correlated with their source biomass materials and preparation method, which led to the differences in their dimensions, crystallinity, and sulfate groups. Nanocellulose isolated from poplar wood showed the slightly higher thermal stability than that of nanocellulose from rice straw. CNFs exhibited the higher thermal stability than that of CNCs. The apparent activation energy ( E ) was calculated to evaluate the degradation process. The nanocellulose had E of 85.17–101.98 kJ/mol for CNCs and 94.92–108.76 kJ/mol for CNFs. Graphic abstract

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Science China-Chemistry · 2024 · IF 10.4

Boosting photocatalytic CO2-to-CO conversion using a biomimetic dinuclear Co(II) complex through an HCO3−-mediated pathway

Wang Yuchen,Shi Wenjie,Tao Weixue,Zhang Jihong,Zhong Di-Chang,Lu Tongbu

Dinuclear metal synergistic catalysis (DMSC) has been evidenced to be effective in enhancing the catalytic activity for CO 2 reduction. However, the reaction kinetics of CO 2 reduction is still limited by the local CO 2 concentration around the dinuclear catalytic centers. Inspired by the structure of carbonic anhydrase, we have designed and synthesized a dinuclear cobalt(II) complex with an –OH group. This complex not only exhibits DMSC for CO 2 reduction but also possesses excellent capture capacity for CO 2 molecules. Consequently, the complex demonstrates high efficiency for the photocatalytic reduction of CO 2 to CO, with turnover number reaching as high as 43,400 and a selectivity of 97%. Even in 10% CO 2 , the complex still shows state-of-the-art catalytic activity. The results of experiments and theoretical calculations reveal that besides the DMSC contributing to the enhanced catalytic activity, the –OH group in the dinuclear cobalt(II) complex facilitates the capture of CO 2 by the formation of HCO 3 − intermediates, thereby enhancing the affinity towards CO 2 and boosting the catalytic activity for CO 2 -to-CO conversion.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2018 ·Vol. 9 ·期 1 ·1-8 · IF 12.353

High energy flexible supercapacitors formed via bottom-up infilling of gel electrolytes into thick porous electrodes

Li Xiangming,Shao Jinyou,Kim Sung-Kon,Yao Chaochao,Wang Junjie,Miao Yu-Run,Zheng Qiye,Sun Pengcheng,Zhang Runyu,Braun Paul V.

Formation of thick, high energy density, flexible solid supercapacitors is challenging because of difficulties infilling gel electrolytes into porous electrodes. Incomplete infilling results in a low capacitance and poor mechanical properties. Here we report a bottom-up infilling method to overcome these challenges. Electrodes up to 500 μm thick, formed from multi-walled carbon nanotubes and a composite of poly(3,4-ethylenedioxythiophene), polystyrene sulfonate and multi-walled carbon nanotubes are successfully infilled with a polyvinyl alcohol/phosphoric acid gel electrolyte. The exceptional mechanical properties of the multi-walled carbon nanotube-based electrode enable it to be rolled into a radius of curvature as small as 0.5 mm without cracking and retain 95% of its initial capacitance after 5000 bending cycles. The areal capacitance of our 500 μm thick poly(3,4-ethylenedioxythiophene), polystyrene sulfonate, multi-walled carbon nanotube-based flexible solid supercapacitor is 2662 mF cm –2 at 2 mV s –1 , at least five times greater than current flexible supercapacitors.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2021 ·Vol. 12 ·期 1 ·1-6 · IF 14.919

Kinetic photovoltage along semiconductor-water interfaces

Li Jidong,Long Yuyang,Hu Zhili,Niu Jiyuan,Xu Tiezhu,Yu Maolin,Li Baowen,Li Xuemei,Zhou Jianxin,Liu Yanpeng,Wang Cheng,Shen Laifa,Guo Wanlin,Yin Jun

External photo-stimuli on heterojunctions commonly induce an electric potential gradient across the interface therein, such as photovoltaic effect, giving rise to various present-day technical devices. In contrast, in-plane potential gradient along the interface has been rarely observed. Here we show that scanning a light beam can induce a persistent in-plane photoelectric voltage along, instead of across, silicon-water interfaces. It is attributed to the following movement of a charge packet in the vicinity of the silicon surface, whose formation is driven by the light-induced potential change across the capacitive interface and a high permittivity of water with large polarity. Other polar liquids and hydrogel on silicon also allow the generation of the in-plane photovoltage, which is, however, negligible for nonpolar liquids. Based on the finding, a portable silicon-hydrogel array has been constructed for detecting the shadow path of a moving Cubaris. Our study opens a window for silicon-based photoelectronics through introducing semiconductor-water interfaces.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2024 ·Vol. 15 ·期 1 ·1-12 · IF 14.7

Strong Lewis-acid coordinated PEO electrolyte achieves 4.8 V-class all-solid-state batteries over 580 Wh kg−1

An Hanwen,Li Menglu,Liu Qingsong,Song Yajie,Liu Jiaxuan,Yu Zhihang,Liu Xingjiang,Deng Biao,Wang Jiajun

Polyethylene oxide (PEO) based electrolytes critically govern the security and energy density of solid-state batteries, but typically suffer from poor oxidation resistance at high voltages, which limits the energy density of batteries. Here, we report a Lewis-acid coordinated strategy to significantly improve the cyclic stability of 4.8 V-class PEO-based battery. The introduced Mg 2+ and Al 3+ with strong electron-withdrawing capability weaken the electron density of ether oxygen (EO) chains via chelation in the coordination structure, resulting in a locally limited interaction between the EO chains and the surface of cathodes at high state of charge. The batteries using Lewis-acid coordinated electrolytes and Ni-rich cathodes achieve high voltage stability of 4.8 V over 300 cycles. Further, the realization of industrial-scale electrolyte membranes, and Ah-level pouch cells over 586 Wh kg ‒1 with good cyclic stability, suggests the potential of our strategy in practical applications of all-solid-state batteries.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2019 ·Vol. 10 ·期 1 ·1-7 · IF 11.878

Atomically defined angstrom-scale all-carbon junctions

Tan Zhibing,Zhang Dan,Tian Han-Rui,Wu Qingqing,Hou Songjun,Pi Jiuchan,Sadeghi Hatef,Tang Zheng,Yang Yang,Liu Junyang,Tan Yuan-Zhi,Chen Zhao-Bin,Shi Jia,Xiao Zongyuan,Lambert Colin,Xie Su-Yuan,Hong Wenjing

Full-carbon electronics at the scale of several angstroms is an expeimental challenge, which could be overcome by exploiting the versatility of carbon allotropes. Here, we investigate charge transport through graphene/single-fullerene/graphene hybrid junctions using a single-molecule manipulation technique. Such sub-nanoscale electronic junctions can be tuned by band gap engineering as exemplified by various pristine fullerenes such as C 60 , C 70 , C 76 and C 90 . In addition, we demonstrate further control of charge transport by breaking the conjugation of their π systems which lowers their conductance, and via heteroatom doping of fullerene, which introduces transport resonances and increase their conductance. Supported by our combined density functional theory (DFT) calculations, a promising future of tunable full-carbon electronics based on numerous sub-nanoscale fullerenes in the large family of carbon allotropes is anticipated.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2024 ·Vol. 15 ·期 1 ·1-16 · IF 14.7

The Arabidopsis receptor-like kinase WAKL4 limits cadmium uptake via phosphorylation and degradation of NRAMP1 transporter

Yuan Jun Jie,Zhao Ya Nan,Yu Su Hang,Sun Ying,Li Gui Xin,Yan Jing Ying,Xu Ji Ming,Ding Wo Na,Benhamed Moussa,Qiu Rong Liang,Jin Chong Wei,Zheng Shao Jian,Ding Zhong Jie

Cadmium (Cd) is a detrimental heavy metal propagated from soil to the food chain via plants, posing a great risk to human health upon consumption. Despite the understanding of Cd tolerance mechanisms in plants, whether and how plants actively respond to Cd and in turn restrict its uptake and accumulation remain elusive. Here, we identify a cell wall-associated receptor-like kinase 4 (WAKL4) involved in specific tolerance to Cd stress. We show that Cd rapidly and exclusively induces WAKL4 accumulation by promoting WAKL4 transcription and blocking its vacuole-dependent proteolysis in roots. The accumulated WAKL4 next interacts with and phosphorylates the Cd transporter NRAMP1 at Tyr488, leading to the enhanced ubiquitination and vacuole-dependent degradation of NRAMP1, and consequently reducing Cd uptake. Our findings therefore uncover a mechanism conferred by the WAKL4-NRAMP1 module that enables plants to actively respond to Cd and limit its uptake, informing the future molecular breeding of low Cd accumulated crops or vegetables.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2024 ·Vol. 15 ·期 1 ·1-8 · IF 14.7

Strong high-energy exciton electroluminescence from the light holes of polytypic quantum dots

Wang Xingzhi,Gao Yan,Liu Xiaonan,Xu Huaiyu,Liu Ruixiang,Song Jiaojiao,Li Bo,Shen Huaibin,Fan Fengjia

High-energy exciton emission could allow single-component multi-colour display or white light-emitting diodes. However, the thermal relaxation of high-energy excitons is much faster than the photon emission of them, making them non-emissive. Here, we report quantum dots with light hole-heavy hole splitting exhibiting strong high-energy exciton electroluminescence from high-lying light holes, opening a gate for high-performance multi-colour light sources. The high-energy electroluminescence can reach 44.5% of the band-edge heavy-hole exciton emission at an electron flux density Φ e of 0.71 × 10 19  s −1 cm −2 − 600 times lower than the photon flux density Φ p (4.3 × 10 21  s −1 cm −2 ) required for the similar ratio. Our simulation and experimental results suggest that the oscillator strength of heavy holes reduces more than that of light holes under electric fields. We attribute this as the main reason for strong light-hole electroluminescence. We observe this phenomenon in both Cd x Zn 1-x Se-ZnS and CdSe-CdS core-shell quantum dots exhibiting large light hole-heavy hole splittings.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2019 ·Vol. 10 ·期 1 ·1-9 · IF 11.878

Overlooked electrolyte destabilization by manganese (II) in lithium-ion batteries

Wang Cun,Xing Lidan,Vatamanu Jenel,Chen Zhi,Lan Guangyuan,Li Weishan,Xu Kang

Transition-metal dissolution from cathode materials, manganese in particular, has been held responsible for severe capacity fading in lithium-ion batteries, with the deposition of the transition-metal cations on anode surface, in elemental form or as chelated-complexes, as the main contributor for such degradations. In this work we demonstrate with diverse experiments and calculations that, besides interfacial manganese species on anode, manganese(II) in bulk electrolyte also significantly destabilizes electrolyte components with its unique solvation-sheath structure, where the decompositions of carbonate molecules and hexafluorophosphate anion are catalyzed via their interactions with manganese(II). The manganese(II)-species eventually deposited on anode surface resists reduction to its elemental form because of its lower electrophilicity than carbonate molecule or anion, whose destabilization leads to sustained consumption. The reveal understanding of the once-overlooked role of manganese-dissolution in electrolytes provides fresh insight into the failure mechanism of manganese-based cathode chemistries, which serves as better guideline to electrolyte design for future batteries.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2024 ·Vol. 15 ·期 1 ·1-8 · IF 14.7

Quantifying the conductivity of a single polyene chain by lifting with an STM tip

You Sifan,Yu Cuiju,Gao Yixuan,Li Xuechao,Peng Guyue,Niu Kaifeng,Xi Jiahao,Xu Chaojie,Du Shixuan,Li Xingxing,Yang Jinlong,Chi Lifeng

Conjugated polymers are promising candidates for molecular wires in nanoelectronics, with flexibility in mechanics, stability in chemistry and variety in electrical conductivity. Polyene, as a segment of polyacetylene, is a typical conjugated polymer with straightforward structure and wide-range adjustable conductance. To obtain atomic scale understanding of charge transfer in polyene, we have measured the conductance of a single polyene-based molecular chain via lifting it up with scanning tunneling microscopy tip. Different from semiconducting characters in pristine polyene (polyacetylene), high conductance and low decay constant are obtained, along with an electronic state around Fermi level and characteristic vibrational mode. These observed phenomena result from pinned molecular orbital owing to molecule-electrode coupling at the interface, and weakened bond length alternation due to electron-phonon coupling inside single molecular chain. Our findings emphasize the interfacial characteristics in molecular junctions and promising properties of polyene, with single molecular conductance as a vital tool for bringing insights into the design and construction of nanodevices.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2024 ·Vol. 15 ·期 1 ·1-12 · IF 14.7

An entanglement association polymer electrolyte for Li-metal batteries

Wang Hangchao,Yang Yali,Gao Chuan,Chen Tao,Song Jin,Zuo Yuxuan,Fang Qiu,Yang Tonghuan,Xiao Wukun,Zhang Kun,Wang Xuefeng,Xia Dingguo

To improve the interface stability between Li-rich Mn-based oxide cathodes and electrolytes, it is necessary to develop new polymer electrolytes. Here, we report an entanglement association polymer electrolyte (PVFH-PVCA) based on a poly (vinylidene fluoride-co-hexafluoropropylene) (PVFH) matrix and a copolymer stabilizer (PVCA) prepared from acrylonitrile, maleic anhydride, and vinylene carbonate. The entangled structure of the PVFH-PVCA electrolyte imparts excellent mechanical properties and eliminates the stress arising from dendrite growth during cycling and forms a stable interface layer, enabling Li//Li symmetric cells to cycle steadily for more than 4500 h at 8 mA cm −2 . The PVCA acts as a stabilizer to promote the formation of an electrochemically robust cathode–electrolyte interphase. It delivers a high specific capacity and excellent cycling stability with 84.7% capacity retention after 400 cycles. Li 1.2 Mn 0.56 Ni 0.16 Co 0.08 O 2 /PVFH-PVCA/Li full cell achieved 125 cycles at 1 C (4.8 V cut-off) with a stable discharge capacity of ~2.5 mAh cm −2 .

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。