NEW JOURNAL OF CHEMISTRY
·
2026
·
IF 2.6
Zhiru Suo,Fushun Li,Yanjun Zhao,Yuan Zhuang,Binbin Huang,Chen Qu,Yifan Ren,Wenhui Li,Chuandong Wu,Jiemin Liu
The discharge of antibiotics into the environment has emerged as a pressing global issue. In particular, the removal of refractory mixed antibiotics requires advanced technologies with high adsorption efficiency and powerful degradation ability. In this study, we synthesized a heterogeneous core–shell Fe3O4@C catalyst as an efficient microreactor for adsorbing and degrading mixed antibiotics of sulfadimidine (SM2) and enrofloxacin (ENR) in aqueous solution under UV–Fenton conditions. The effects of different experimental conditions on the removal of antibiotics were investigated through L9(43) orthogonal experiments, and the synergistic effect and degradation mechanisms were systematically revealed. The results showed that the Fe3O4@C Fenton system demonstrated significantly enhanced catalytic activity, with hydroxyl radical (OH˙) concentrations of approximately 6.2 and 6.7 times higher than those observed in the Fe3O4 and Fe3O4 + AC Fenton systems, respectively. Moreover, the degradation pathway and mechanism analysis revealed that the adsorption and degradation behavior of the two mixed antibiotics in the Fe3O4@C Fenton system could be better described using pseudo-secondary kinetic models. The substantial improvement clearly indicates that the Fe3O4@C composite serves as a highly efficient microreactor for H2O2 decomposition in the Fenton process, thus providing a new avenue for the degradation of mixed antibiotics in water.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2015
·Vol. 3
·期 43
·21569-21577
·
IF 7.443
Zhaoqiang Li,Longwei Yin
A sandwich-like structure with reduced graphene oxide (RGO) wrapped MOF-derived ZnCo2O4–ZnO–C polyhedrons on nickel foam as an anode for high performance lithium ion batteries (LIBs) is for the first time reported via simply growing MOFs on Ni foam, and wrapping graphene oxide nanosheets on MOFs, and then annealing under a N2 atmosphere. It should be noted that the MOF-derived porous products are composed of carbon-coated spinel ZnCo2O4–ZnO nanoparticle polyhedrons. When tested as anodes for LIBs, the unique RGO/ZnCo2O4–ZnO–C/Ni sandwich-structured LIB anodes exhibit superior coulombic efficiency, excellent cycling stability and rate capability. The in situ formed carbon layers outside the ZnCo2O4–ZnO act as not only a conductive substrate but also a buffer layer for volume changes. The open pores in ZnCo2O4–ZnO–C polyhedrons provide sufficient electrolyte as well as serve as cushion space to further alleviate volume changes. The RGO nanosheets act as a flexible protector to firmly fix polyhedrons on the Ni foam, as well as a conductive substrate to wire up all the polyhedrons. The interconnected carbon layers and two high conductive substrates (RGO and Ni foam) together form an unhindered highway for charge transfer during discharge/charge processes, promising good electrochemical performance.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
固态化学
·
电极工程
✓ 已验证
DOI
高影响因子
Journal of Nanomaterials
·
2018
·Vol. 2018
·期 1
·1634814
·
IF 2.207
Lianbing Zhong,Guihong Geng,Yujin Wang,Feng Ye,Limeng Liu
A fully dense TaC ceramic was prepared by hot pressing using 10 mol% ZrC plus 5 mol% Cu as a sintering aid. Formation of (Ta, Zr)C solid solution (ss) by reaction between TaC and ZrC facilitated densification. Addition of Cu refined the microstructure and consequently improved flexural strength of the TaC ceramics. TEM investigation found ubiquitous precipitation of nanocrystallites at multigrain conjunctions. The nanocrystallites were (Ta, Zr)C solid solution with uniform dispersion in an oxygen-rich glassy matrix. Although formation of nanoprecipitates may not much affect the mechanical properties of the TaC ceramic, the structure suggested a new type of nanoceramic worth further research.
研究领域:
材料科学
·
陶瓷学
·
固态化学
·
显微结构分析
·
复合材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 5.6
Xiaohong Li,Cai Ye,Jianjun Chen,Meijing Wang
A novel aluminum and titanium co-doped polycarbosilane (PATCS) was synthesized by the reaction of liquid polycarbosilane (LPCS), Al(acac) 3 , and Ti(Cp) 2 Cl 2 . The thermal polymerization mechanism of the PATCS was that Si-H bonds in LPCS reacted with C=C/Ti-Cl bonds in Ti(Cp) 2 Cl 2 and Al-O-C/Al-O=C groups in Al(acac) 3 to form Si-Ti, Si-C-C, Si-O-Al bonds. The TG-DSC results showed that the synthesized PATCS exhibited greater stability and a higher ceramic yield compared to PACS. A novel type Si(Al,Ti)CO ceramic fibers (AT-11) with tensile strength (2222 MPa) were obtained by melt-spining, curing, pyrolysis of the synthesized PATCS. After sintering, the AT-13 showed excellent electromagnetic wave absorption. When the thickness reached 2.3 mm, the minimum reflection loss (RL min ) vaule and the EAB were -52.02 dB and 5.12 GHz (RL < −10 dB, 10.64-15.76 GHz), respectively. While the AT-18 fibers showed higher high-temperature creep resistance in the range of 1300∼1700 °C than those of Si(Al)C ceramic fibers.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Fucheng Liu,Yuhui Chen,Lei Zhuang,Hui Wang,Hulei Yu,Yanhui Chu
High-temperature materials with superior long-term oxidation resistance above 2000 °C are urgently sought for next-generation hypersonic vehicles. Here, (W 0.28 Ta 0.28 Mo 0.28 Cr 0.15 )(Al 0.2 Si 0.8 ) 2 -Al 2 O 3 dual-phase high-entropy alumino-silicides (HEAS-Al 2 O 3 ) are developed, which exhibit superior long-term oxidation resistance up to 2100 °C. To be specific, the as-fabricated HEAS-Al 2 O 3 samples are found to consistently follow an oxygen-diffusion parabolic law across 1700–2100 °C, possessing a high activation energy of 234.4 kJ mol −1 . Moreover, an ultralow oxidation depth of 0.4 mm after 120 min of laser oxidation and a linear plasma ablation rate of 0.026 μm s −1 at 2100 °C are achieved. Such remarkable oxidation resistance is mainly attributed to the increase in Al cations due to Al 2 O 3 incorporation, coupled with the inclusion of multiple cationic elements, to significantly enhance the rigidity of the glass network. Thereby, the viscosity and high-temperature stability of the resulting aluminosilicate glass are markedly improved, effectively protecting the underlying unoxidized HEAS-Al 2 O 3 . The as-developed HEAS-Al 2 O 3 shows great promise as a thermal structural candidate for next-generation hypersonic vehicles.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Guoxu Ni,Runye Hu,Qikai Wang,Wenwen Shi,Qiuhong Cui,Jun Yan
HF-free synthesis of FeSe₂@S-Ti₂C via Lewis acidic molten-salt etching. • Simultaneous Ti₂C termination, etching, and FeSe₂ anchoring in one step. • Strong interfacial coupling endows Ti₂C/FeSe₂ with metallic conductivity. • Ti₂C/FeSe₂ delivers high capacity, long life, and high rate for SIBs. • Synergistic Na-storage mechanism of FeSe₂@S-Ti₂C revealed by DFT and in situ EIS/DRT analyses. The development of high-performance anode materials is critical for advancing sodium-ion batteries (SIBs) toward practical applications. Herein, we report a novel FeSe 2 @S-Ti 2 C heterostructure synthesized via a safe and straightforward Lewis acidic molten salt etching strategy followed by in-situ selenization. This approach enables simultaneous etching of Ti 2 AlC MAX phase, surface termination with sulfur-containing groups, and uniform anchoring of FeSe 2 nanoparticles within the Ti 2 C MXene matrix, eliminating the need for hazardous HF or post-synthesis metal removal. The resulting heterostructure integrates multiple advantageous features: The highly conductive Ti₂C MXene framework accelerates the transport of Na + , while its structural robustness effectively accommodates the volume expansion caused by Na + deintercalation. S-containing surface terminations provide additional active sites that enhance Na + adsorption. Ultimately, the FeSe₂@S-Ti₂C anode demonstrates exceptional sodium-storage performance, characterized by a high reversible capacity of 397.6 mAh g −1 after 350 cycles at 1 A g −1 , superior rate capability (227.8 mAh g −1 at 5 A g −1 ), as well as robust full-cell performance with an initial Coulombic efficiency of 91.2% and a reversible capacity of 493.6 mAh g −1 following 500 cycles at 1 A g −1 . Density functional theory calculations further elucidate the underlying mechanism, revealing metallic conductivity, reduced Na + diffusion barrier (0.30 eV), and enhanced Na adsorption energy (−2.43 eV) in the heterostructure. This work presents a versatile and scalable strategy for constructing advanced MXene-based heterostructures, offering promising avenues for high-performance SIB anodes. Description : Lewis acidic molten salt etching enables one-pot synthesis of FeSe₂@S–Ti₂C heterostructures; the conductive MXene framework with S-terminations and interfacial coupling deliver fast Na + diffusion and robust sodium storage. Download: Download high-res image (203KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS AND STRUCTURES
·
2026
·Vol. 59
·期 6
·303
·
IF 3.9
Yin Jianhao,Liao Jiaxin,Kong Xiangming
The composition, moisture distribution, and microstructural evolutions of calcium-silicate-hydrate (C–S–H) in synthetic C–S–H (SynCSH) and hardened tricalcium silicate paste (HC 3 SP) during the first drying-resaturation (D-R) cycle were systematically compared using low-field 1 H-nuclear magnetic resonance (LF-NMR) and thermogravimetric analysis (TGA). The stoichiometric formulas of C–S–H in SynCSH and HC 3 SP were determined as C 0.9 SH 3.65 and C 2.0 SH 4.53 , respectively. Water contents of C–S–H quantified by TGA and LF-NMR exhibit good linear relationship. Three types of water, interlayer water, gel water and capillary water in C–S–H were identified by LF-NMR. Notable observations included the abnormal increase of interlayer water during the drying process and subsequent decrease during resaturation, along with irreversible decreases in capillary water and increases in gel water after D-R cycle, which were attributed to the rearrangement of C–S–H layered structures. SynCSH exhibited collapse of capillary pore structures following the D-R cycle, resulting in irreversible reductions in total water content. This finding confirms the validity of synthetic C–S–H as a model material for cementitious C–S–H research while highlighting its limitations in predicting the microstructural stability of real cement pastes under moisture cycling.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2026
·Vol. 193
·期 7
·503
·
IF 5.4
Xiao Yue,Wen Xuefei,Zhang Xingzhong,Chen Hongrui,Tang Jie,Chi Hai,Li Liman,Thanapop Soteyome
To enable sensitive quantitative detection of zearalenone (ZEN) in cereal matrices, this study develops a molecularly imprinted electrochemical sensor. A three-dimensional flower-shaped carbon composite material (CoNiZn@C), synthesized from a ternary CoNiZn metal–organic framework, was utilized as a highly conductive substrate featuring excellent electrical conductivity and abundant binding sites. Density functional theory calculations were conducted to elucidate the intermolecular interactions and cooperative recognition mechanisms between zearalenone and the selected monomers. Experimentally, the AuNPs-based thioaniline units (PATP@AuNPs) and pyrrole were employed as bifunctional monomers. Specifically, PATP@AuNPs can be stably immobilized on the substrate surface to enhance interfacial electron transfer efficiency, while simultaneous in situ copolymerization of the two monomers generates numerous non-covalent binding cavities capable of specifically recognizing ZEN. Under optimized experimental conditions, the sensor exhibited a linear detection range from 10 nM to 1000 µM and a detection limit as low as 1.6 nM. This detection approach is straightforward, cost-effective, and demonstrates excellent specificity and sensitivity, indicating substantial potential for rapid screening and quantitative analysis of mycotoxins in agricultural products. Graphical
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2026
·
IF 9.9
Cuicui Wang,Yuchen Geng,Jie Zhang,Jing Ren,Maolian Guo,Huazhang Zhao,Jianfeng Li
A superhydrophilic C-hBN layer was coated on PVDF membrane via PVA-CNT crosslinking. • The membrane has notable flux increase and rapid PMS activation for fouling control. • Enhanced flux was due to the increased heat unitization efficiency of C-hBN layer. • PMS was priorly adsorbed to generate singlet oxygen for selective organic removal. • The membrane is able to reduce heat and mass transfer resistance simultaneously. How to get membranes with high water flux and sustainable long-term operation remains a key challenge for membrane distillation (MD) in treating high-salinity organic wastewater. Herein, a novel carbon-doped hexagonal boron nitride (C-hBN) catalytic membrane was developed to boost water flux and enable in-situ cleaning for membrane distillation via selective peroxymonosulfate (PMS) oxidization. Experimental results showed that the membrane achieved a 28.3% increase in water flux and an 83.8% reduction in flux decline rate. The numerical COMSOL simulations and membrane surface calculation using heat and mass transfer equations revealed that the enhanced flux was mainly attributed to the increased heat unitization efficiency during water evaporation in superhydrophilic C-hBN layer. Density functional theory (DFT) calculations and electron paramagnetic resonance (EPR) indicated that C-hBN exhibited a strong interaction with PMS, and 1 O 2 was selectively generated, leading to the efficient organic removal in high salinity environment. This study offers a viable pathway to engineer high-performance, in-situ cleaning membranes for sustainable operation of membrane distillation. Download: Download high-res image (194KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Journal of Water Process Engineering
·
2026
·
IF 6.6
Sung-Hyo Jung,Sung-Hak Hong,Heejin Yang,Chang-Gu Lee
UV 222 /hBN exhibited 3-fold higher k PFOA than UV 254 /hBN under equal UV fluence. • UV 222 induced relatively higher C hole than UV 254 with strengthened light activity. • Acidic pH enhanced PFOA adsorption and hole utilization particularly under UV 222 . • UV 222 /hBN demonstrated greater robustness against water matrices than UV 254 /hBN. Hydrophobic hexagonal boron nitride (hBN) has attracted attention as a promising material for the UV-C light-driven photocatalysis of aqueous per - and polyfluoroalkyl substances (PFASs). Far UV-C light centered at 222 nm (UV 222 ) could provide a suitable irradiation source for contending wide band gap of hBN, serving as an alternative to conventional 254 nm UV-C (UV 254 ). This study investigated the first application of a KrCl lamp emitting UV 222 in combination with hBN to degrade perfluorooctanoic acid (PFOA) and compared it with UV 254 under equal UV fluence. UV 222 demonstrated superior hBN activation performance, with UV 222 /hBN exhibiting a higher PFOA degradation rate constant and more extensive chain shortening and defluorination than UV 254 /hBN. These enhancements were attributed to the higher light absorbance of hBN under UV 222, supported by the higher photocurrent response, as well as contributions from direct photolysis. Photogenerated holes were identified as the main reactive species, and their concentration was estimated to be 2.7 times higher in UV 222 /hBN than in UV 254 /hBN. Notably, acidic pH conditions enhanced PFOA adsorption, thereby promoting hole utilization, and the photocatalytic promotion effect was more pronounced under UV 222 than under UV 254 . Moreover, the inhibitory effect of natural water matrix components, including inorganic ions and natural organic matters, was also minimal in UV 222 /hBN. This study demonstrated that far UV-C serves as an effective hBN activation source, offering a viable engineering strategy for the photocatalytic treatment of PFASs. Download: Download high-res image (124KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
AQUACULTURE INTERNATIONAL
·
2026
·Vol. 34
·期 7
·284
·
IF 3.5
Hu Qi,Liao Kai,Zhang Yang,Liu Yang,He Xiaoxue,Xie Fengjun,Tuo Rui,Qin Qin,Xu Jilin
Bivalve planktonic larvae are extremely vulnerable to oxidative stress under intensive hatchery conditions, resulting in growth retardation and elevated mortality. This study evaluated the effects of dietary supplementation with microencapsulated vitamin C on growth, antioxidant capacity, and innate immunity in planktonic Manila clam ( Ruditapes philippinarum ) larvae. An 11-day feeding trial was conducted in cylindrical tanks using a microalgal-based diet and supplemented with 0, 0.086, 0.114, or 0.142 mg of microencapsulated vitamin C powder per gram of larval wet weight. Relative to the non-supplemented control (0 mg g −1 group), larvae fed 0.114 mg g −1 microencapsulated vitamin C showed a 33% increase in weight per tank and a 20% increase in survival rate. Following H 2 O 2 exposure, mortality at both 8 h and 12 h was significantly reduced in all vitamin C-supplemented groups relative to the control. In addition, the 0.114 mg g −1 group showed significantly higher superoxide dismutase (SOD) and glutathione peroxidase (GPx) activities and increased reduced glutathione (GSH) content, lower malondialdehyde (MDA) content, upregulated Nrf2 pathway genes ( nrf2 and keap1 ), and downregulated gclc and gstp1 . In the same group, lysozyme (LZM), phenoloxidase (PO), and alkaline phosphatase (AKP) activities were significantly increased, while NF-κB pathway genes ( tlr4 , myd88 , cox2 , ikkα , and nfkb1 ) were significantly downregulated. Regarding proinflammatory and hypoxia-related factors, tnf-α was significantly downregulated and hif-1α was markedly downregulated in the 0.114 mg g −1 group, whereas il-17 was significantly downregulated in the 0.142 mg g −1 group. Overall, dietary supplementation with 0.114 mg g −1 microencapsulated vitamin C significantly enhanced weight per tank, survival, oxidative stress resistance, and innate immunity in R. philippinarum larvae.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Nasim Ullah,Raza Ullah,Muhammad Adnan,Muhammad Rashid,Muhammad Fayaz,Bing Yu,Hailin Cong
g -C 3 N 4 activated ZIF-67 impregnated composite hydrogel beads adsorbent was synthesized. • Brilliant green was used as modal adsorbate. • Effect of initial dye concentration, contact time, pH, and temperature were examined. • Composite hydrogel beads adsorbent show maximum adsorption capacity of 226 mg/g. • The composite hydrogel beads adsorbent followed Pseudo-first-order kinetics and Freundlich isotherm. This research work presents new composite hydrogel beads adsorbent designed to adsorb brilliant green (BG) dye from water. The Graphitic carbon nitride (g-C 3 N 4 ) was modified with ZIF-67 and further integrated into sodium alginate to prepared composite hydrogel beads (CHB) adsorbent. The (CHB) adsorbent were comprehensively characterized using a suite of analytical techniques, such as FT-IR, TGA, SEM, EDX, XPS and BET analysis. To determine the optimal conditions for brilliant green dye removal, batch trials were carried out across a range of pH values (2−11), Dose (0.005–0.04 g), BG dye concentrations (25–300 mg/L), time (15–300 min), and temperatures (25–40 °C) studies respectively. The BET study showed that the surface area of (CHB) adsorbent was 0.500 m 2 /g. The (CHB) adsorbent demonstrated a maximum adsorption capacity of 226.27 mg/g. Kinetic analysis indicated that the (CHB) adsorbent followed second-order kinetics. The isotherm study indicated that the Freundlich model provided the best fit for the equilibrium data. The removal of BG using CHB adsorbent indicated that ΔGᴼ ranged from −2.22 to −2.37 KJ/mol. However, the ΔHᴼ received results was 3.91 KJ/mol. The determination indicating the adsorption process was endothermic and takes place spontaneously has been verified by the thermodynamic study. The results from the regeneration experiments indicated that the BG dye adsorption successfully completed up to five adsorption-desorption cycles while retaining an efficiency of 82.7% throughout the entire process. This (CHB) adsorbent providing an efficient and environmentally friendly for wastewater treatment.
✓ 已验证
DOI
高影响因子