CHEMICAL ENGINEERING JOURNAL
·
2018
·
IF 6.735
Linghui Zhao,Yufan Chen,Yong Feng,Deli Wu
In this study, three GR/Cu(II) (Green Rust/Cu(II)) composites (GR SO4 /Cu(II), GR CO3 /Cu(II), and GR Cl /Cu(II)) were synthesized and used to activate dioxygen under weakly acidic conditions. The change in the mechanism caused by three interlayer anions, CO 3 2− , SO 4 2− , and Cl − , was discussed for the first time. Both Cu(I) and H 2 O 2 were generated during GR/Cu(II)-induced dioxygen activation, resulting in the rapid degradation of acetaminophen. The inconsistency between the reaction constant rates and oxidation reduction potential (ORP) order revealed the effects of the various types of interlayer ions. To further reveal the effects of the anions, the variations in the morphology and valence states of the composites were examined. To identify the rate-controlling step of dioxygen activation by the three composites, the production of reactive oxygen species (ROS) was investigated and compared. The combination of interlayer anions and metal ions changed the oxide morphology of the solid-phase materials. Furthermore, changes in the content of the reductive species (Fe(II) or Cu(I)) either enhanced or inhibited specific reaction steps. The results from this study could deepen our understanding of the effects of anions on dioxygen activation by transition metals and provide a basis for the study of oxidation reactions and mechanisms in the presence of various anions.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2017
·
IF 7.504
Qiqi He,Kai Yao,Xiaofeng Wang,Xuefeng Xia,Shifeng Leng,Fan Li
Flexible perovskite solar cells (PSCs) using plastic substrates have become one of the most attractive points in the field of thin-film solar cells. Low-temperature and solution-processable nanoparticles (NPs) enable the fabrication of semiconductor thin films in a simple and low-cost approach to function as charge-selective layers in flexible PSCs. Here, we synthesized phase-pure p-type Cu-doped NiOx NPs with good electrical properties, which can be processed to smooth, pinhole-free, and efficient hole transport layers (HTLs) with large-area uniformity over a wide range of film thickness using a room-temperature solution-processing technique. Such a high-quality inorganic HTL allows for the fabrication of flexible PSCs with an active area >1 cm2, which have a power conversion efficiency over 15.01% without hysteresis. Moreover, the Cu/NiOx NP-based flexible devices also demonstrate excellent air stability and mechanical stability compared to their counterpart fabricated on the pristine NiOx films. This work will contribute to the evolution of upscaling flexible PSCs with a simple fabrication process and high device performances.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Qi Liang,Donglan Zhou,Kai Zhang,María B. Camarada,Jianhua Xiong,Xiaoning Liao
Developing a reliable detection method with high performance for pefloxacin (PFL) is crucial for environmental protection and food safety. However, this remains a challenge. In this study, a new portable electrochemical sensor with a smartphone readout system based on a modified Cu-MOF was designed for PFL detection. The modified Cu-MOF was prepared using a two-step post-synthetic modification strategy. Firstly, thiourea (Th) was doped into the Cu-MOF framework using a solvothermal method, and then the Th-Cu-MOF was further functionalized with MWCNTs using a self-assembly method. X-ray photoelectron spectroscopy combining with chronocoulometry technique and electrochemical impedance measurements revealed that Th not only increased the Cu-MOF’s affinity to PFL but also acted as a bridge, enhancing the interaction between Cu-MOF and MWCNTs. This led to a MOF-based nanocomposite with significantly improved conductivity and specific catalytic properties for PFL. After optimizing detection conditions, the portable sensor showed wide linearity range (9 nM–2.5 μM), excellent selectivity, good stability and a low detection limit (2.6 nM) surpassed that of HPLC in the detection of PEL by utilizing square wave voltammetry technique. In real sample analysis of pond water, shrimp flesh and pork, the portable sensor showed good recoveries (87.92 %–104.4 %), which were comparable to those of HPLC and an electrochemical sensor with a classical three-electrode configuration. This demonstrates that the sensor holds excellent potential for on-site monitoring of PFL in aquaculture.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Jinjuan Gao,Wen Yang,Runcheng Liu,Jingwen Feng,Yaru Li,Mingshun Jiang,Shouzhen Jiang
The optical fiber sensor, which exploits surface plasmon resonance (SPR), finds extensive application in biological detection owing to its miniaturized and real-time measurement capabilities. Nevertheless, SPR sensors alone exhibit limited sensitivity when detecting small biological molecules. This paper presents a novel gold nanoparticle (AuNPs)/two-dimensional metal–organic framework (2D MOF Cu-TCPP)/Au/D-shaped fiber SPR sensor for dopamine detection. The composite structure of AuNPs/2D MOF/Au was designed to facilitate the coupling of SPR and local surface plasmon resonance (LSPR), resulting in a substantial enhancement of the intensity of the surface electric field. A 104.61 % increase in sensitivity and a 73.87 % increase in figure of merit (FOM) were achieved by optimizing the optimal deposition concentration of AuNPs/2D MOF . The finite element method was utilized in COMSOL software to demonstrate that the coupling of SPR and LSPR can significantly enhance the sensitivity value (10,000 nm/RIU). Additionally, the sensitization mechanism of the sensor is elucidated by the energy band theory. Moreover, probe DNA was utilized as a linker to capture dopamine molecules, achieving a low limit of detection (LOD) of 1.07 ± 0.07*10 −14 M. These results demonstrated that the proposed sensor enables accurate and highly sensitive detection of dopamine molecules.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2024
·
IF 5.7
Feng Hong,Yongkun Zhao,Shixing Pan,Liangqiong Ren,Feng Jiang,Long Wu,Yiping Chen
Due to the high toxicity of aflatoxin B1 and its risks to human health, we developed a click reaction-mediated automated fluorescent immunosensor (CAFI) for sensitive detection of aflatoxin B1 based on the Cu(I)-catalyzed click reaction. With its large specific surface area, a copper-based metal–organic framework (Cu-MOF) was synthesized to adsorb and enrich the copper ion (Cu(II)) and then load the complete antigen (BSA-AFB1). After the immunoreaction, Cu(II) inside the Cu-MOF-Antigen conjugate would be reduced to Cu(I) in the presence of sodium ascorbate, which triggered the click reaction between the fluorescent donor-modified DNA and the receptor-modified complementary DNA to lead to a fluorescence signal readout. The whole reaction steps were finished by the self-developed automated immunoreaction device. This CAFI method showed a limit of detection (LOD) of 0.48 pg/mL as well as a 670-fold enhancement in sensitivity compared to conventional ELISA, revealing its great potential in practical applications and automated detection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2016
·
IF 4.012
Jing-Jing Lv,Zheng-Jun Wang,Jiu-Ju Feng,Renhua Qiu,Ai-Jun Wang,Xinhua Xu
The construction and design of nanomaterials are important for improving their performance. Here we present a simple one-pot wet-chemical method for the preparation of alloyed Pd-Cu nanowires using octylphenoxypolyethoxyethanol (NP-40) as structure-directing and stabilizing agents. The obtained nanocrystals display outstanding catalytic activity for ligand-free Suzuki cross coupling reaction under mild conditions, and can be easily recovered and reused for at least 5 consecutive cycles without showing significant loss of catalytic activity.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2017
·
IF 5.951
Pengtao Qiu,Jinglei Bi,Xiaojing Zhang,Shengchun Yang
We present a novel synthetic strategy for the shape-controlled synthesis of Pt-based alloy nanoparticles (NPs) in inorganic molten salt without using any organic surfactants or capping agents. Graphene oxide (GO) was chosen as the stabilizer in the inorganic molten salt synthetic strategy, due to the existence of various oxygen-containing functional groups on its surface, which adsorb, anchor, and stabilize the metal ions or NPs. After GO was added in molten salt, the PtPd nanosheets were formed on its surface in H2 atmosphere. In addition, when KI was chosen as the shape-inducing agent to selectively adsorb on and fully protect the (100) facets of alloys, PtPd nanocubes with core–shell structure, PtCu nanohemicubes, and PtPdCu nanocubes were prepared successfully on the surface of GO in molten salt. Introduction of GO as the stabilizer in molten salt proves a new approach in synthesis of Pt-based nanocrystals with controlled morphologies.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS & DESIGN
·
2016
·
IF 3.997
Tianlin Zhang,Xiadan Yue,Keren Zhang,Jinghao Li,Caiyian Zhu,Lei Zhang,Wei Chen
A polymerizable complex of copper(II) ion with unsaturated quaternary ammonium cation-modified salicylaldoxime ligand was prepared and used to synthesize a novel copper(II) ion imprinted polymers (Cu(II)-IIPs). Elemental analysis (EA), Fourier transform infrared spectroscopy (FTIR), and NMR spectroscopy confirmed the structures of the polymerizable complex and Cu(II)-IIPs. Thermogravimetric analysis (TGA), Brunauer–Emmett–Teller surface area analysis (BET), and scanning electron microscopy (SEM) characterized physical properties and morphologies of synthesized metal complex and corresponding polymers. The effect of pH, contact time, and initial Cu 2 + and SO 4 2 − concentration on the simultaneous adsorption of Cu 2 + and SO 4 2 − ions of Cu(II)-IIPs were investigated. Cu(II)-IIPs showed high hydrophilicity and simultaneously rapid adsorption of Cu 2 + and SO 4 2 − from solution. Moreover, Cu(II)-IIPs displayed highest adsorption capacity in the pH range of 5.0–6.5, the separation factor ( β ) between Cu 2 + with respect to Fe 3 + was 1866, the equilibrium adsorption capacities for Cu 2 + and SO 4 2 − were almost the same and close to 0.13 mmol g − 1 at 25 °C. Stripping experiments revealed that 1.5 mol L − 1 H 2 SO 4 was an effective eluent for desorbing copper (II) ions from Cu(II)-IIPs. In additional, Cu(II)-IIPs exhibited good recyclability and reusability for 5 cycles without deterioration of its selective ion-absorbing capacity.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2016
·
IF 7.145
Wei Zhang,Jingyan Xie,Wei Hou,Yangqing Liu,Yu Zhou,Jun Wang
Supported catalysts are widely studied, and exploring new promising supports is significant to access more applications. In this work, novel copper-containing MOR-type zeolites Cu–MOR were synthesized in a one-pot template-free route and served as efficient supports for vanadium oxide. In the heterogeneous oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF) with molecular oxygen (O2) under ambient pressure, the obtained catalyst demonstrated high yield (91.5%) and good reusability. Even under the ambient air pressure, it gave a DFF yield of 72.1%. Structure–activity relationship analysis indicated that the strong interaction between the framework Cu species and the guest V sites accounted for the remarkable performance. This work reveals that the Cu–MOR zeolite uniquely acts as the robust support toward well-performed non-noble metal heterogeneous catalyst for biomass conversion.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2013
·
IF 3.473
Xiaofeng Xu,Peng Liao,Songhu Yuan,Man Tong,Mingsen Luo,Wenjing Xie
A novel Pd-based electro-Fenton process has recently been developed to degrade organic contaminants in wastewaters and groundwater. However, the high cost of Pd catalyst limits the application of this process. In this study, Cu supported on bamboo charcoal (Cu/C) was synthesized to evaluate the feasibility of substituting Pd catalysts. Using phenol as a probe organic contaminant, the performance of Cu/C catalyst was evaluated for the electro-Fenton degradation of phenol in a typical undivided electrolytic system. The electrochemical degradation of phenol in the presence of Cu/C was significant, following a pseudo-first-order kinetics with rate constant ( k 1 ) of 0.008 min −1 . The addition of Fe 2+ remarkably enhanced the degradation ( k 1 = 0.012 min −1 ). H 2 O 2 and OH were validated as the reactive oxidizing species (ROSs), and OH was the main ROS contributing to phenol degradation. The as-synthesized Cu/C consisting of Cu, CuO and Cu 2 O could catalyze the production of H 2 O 2 from chemisorbed H 2 and O 2 as well as the decomposition of H 2 O 2 to OH. Particularly, the addition of Fe 2+ facilitated the transformation of H 2 O 2 to OH. Phenol degradation increased with increasing the current from 5 to 50 mA and decreased with the further increase to 100 mA. The degradation improved with the increase in Cu loadings and the decrease in solution pH. The presence of NaNO 3 , Na 2 SO 3 or Na 2 S inhibited the degradation, while the presence of NaCl increased the degradation. Although the activity of Cu/C is much lower than that of Pd/C for phenol degradation, the cost of Cu/C is much lower.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2013
·
IF 5.008
Xiaosheng Zhang,Hong Xu,Zhijun Zuo,Zhi Lin,Stanislav Ferdov,Jinxiang Dong
Copper zirconium phosphate hydrate (Cu(OH)2Zr(HPO4)2·2H2O, hereafter referred to as Cu-α-ZrP) with high crystallinity was directly synthesized in a NaF-CuO-ZrO-P2O5-H2O system under hydrothermal conditions. The copper ion was confirmed to be an exchangeable cation in the Cu-α-ZrP through elemental analysis and a proton ion exchange process. The crystal structure of the Cu-α-ZrP was determined ab initio by using X-ray powder diffraction data. In the structure, the CuO6 octahedron would be located in an exchangeable atom position. Moreover, Cu-α-ZrP was evaluated as an additive in grease in a four ball test. The maximum nonseizure load (PB, representing the load-carrying capacity) of the base grease containing Cu-α-ZrP was increased from 353 to 1235 N. The excellent load-carrying capacity may be explained by the easier adherence of the material to the worn surface forming a tight protective film.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 40
·31262-31269
·
IF 3.84
Yulan Wang,Yueyun Li,Hongmin Ma,Xiang Ren,Wei Cao,Tao Yan,Qin Wei
A simple and novel label-free electrochemical immunosensor based on a bimetallic alloy was fabricated in this work. Three-dimensional (3D) pine-like Au–Cu nanodendrites (NDs) electrodeposited on the bare glassy carbon electrode (GCE) were employed as transducing materials to achieve the production and amplification of the electrochemical signal. The electrochemical detection was based on the fact that the immunocomplex can hinder the direct electron transfer in the redox process of Cu. Cu, instead of the traditional redox electron mediators, was exploited as a new signal producer. Au with good electron transfer ability could act as signal amplifier and capture antibodies. In addition, the 3D pine-like morphology of Au–Cu NDs with large specific surface area was beneficial to the immobilization of antibodies and the electron transfer between protein and metal. Under the optimal conditions, by using carbohydrate antigen 724 (CA724) as the target analyte, the label-free electrochemical immunosensor exhibited a wide linear range from 0.5 pg mL−1 to 500 ng mL−1 and a low detection limit of 0.25 pg mL−1. The proposed immunosensor also displayed a satisfying electrochemical performance with good reproducibility, selectivity and stability. In this sense, this novel method will provide a new promising application for the clinical immunoassay of other biomarkers.
✓ 已验证
产品关联
DOI
高影响因子