ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Jiayou Liao,Min Wen,Zhe Meng,Xinyue Meng,Xianjie Meng,Xianmei Xie,ChengYun Gao,Xia An,Jinping Li,Xu Wu
The development of efficient carbon capture technologies, such as membrane separation technology, is of vital importance for achieving carbon neutrality. Mixed matrix membranes (MMMs) integrate the advantages of polymer matrices and inorganic fillers, making them promising materials for high-performance carbon capture. However, their practical separation performance is often severely limited by poor interfacial compatibility. To address this challenge, we designed and fabricated a series of chemically bonded MMMs. Graphitic carbon nitride (g-C3N4) served as a solid-state cross-linker, with its amino groups reacting with the benzyl bromide moieties of the brominated polyimide (PI-Br) matrix through nucleophilic substitution. This interfacial chemical bonding improved polymer-filler compatibility and introduced interfacial cross-linking constraints, thereby regulating polymer chain packing. Comprehensive characterization Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) indicated that the organic-inorganic interfacial interactions effectively minimized nonselective interfacial defects and promoted efficient gas transport. Among the investigated membranes, PI-Br-4-3% demonstrated the most favorable separation capability, with CO2 permeability and CO2/CH4 selectivity reaching 335.38 Barrer and 47.03, respectively. Furthermore, the cross-linked MMM demonstrated remarkable stability under varying pressure and temperature conditions, providing solid empirical evidence for its potential application in industrial natural gas purification.
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Jia Wang,Yizhen Situ,Wenyu Zheng,Weidong Zhang,Qingyuan Yang
Polymer transport resistance was tuned by controlling the solvent evaporation rate. • Reduced polymer transport resistance promoted a more effective contribution of ZIF-8 transport pathways to CO 2 /N 2 separation. • The 7.8 wt% in situ-grown MMM achieved a CO 2 permeability of 510 Barrer and a CO 2 /N 2 selectivity of 33.0. Beyond filler modification, regulating the polymer structure is also crucial for optimizing gas transport in mixed-matrix membranes (MMMs), yet this aspect remains insufficiently explored. Herein, the solvent evaporation rate was controlled to regulate the transport resistance of Pebax 2533 and elucidate its influence on the transport contribution of ZIF-8 in ZIF-8/Pebax MMMs for CO 2 /N 2 separation. For Pebax 2533 membranes, increasing the evaporation rate reduced both crystallinity and relative fractional free volume, resulting in a non-monotonic variation in CO 2 permeability and a decrease in CO 2 /N 2 selectivity. At a moderate evaporation rate of 2.5 × 10 −5 kg·m −2 ·s −1 , the balance between reduced crystallinity and preserved free volume resulted in lower polymer transport resistance, enabling the contribution of ZIF-8 to be more effectively translated into membrane separation performance. As a result, the in situ-grown MMM containing 7.8 wt% ZIF-8 achieved a CO 2 permeability of 510.0 Barrer and a CO 2 /N 2 selectivity of 33.0, with its CO 2 permeability exceeding that of most reported Pebax-based MMMs. This work demonstrates that controlling solvent evaporation is an effective strategy to regulate polymer transport resistance and enhance the contribution of ZIF-8 in MMMs. Download: Download high-res image (207KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Han Lu,Deming Rao,Si-Min Xu,Sicong Sun,Yuanzhe Gao,Wei Dang,Ruikang Zhang
Nb-doped BiOBr photocatalyst was synthesized via a facile method. • Nb-BiOBr exhibits significantly enhanced CO selectivity and production rate. • Nb-induced impurity levels enhance light absorption and prolong carrier lifetimes. • Nb doping lowers the rate-determining barrier for CO 2 photoreduction on BiOBr. Photocatalytic CO 2 reduction using water as a proton source offers a sustainable and promising route for renewable fuel production, yet its efficiency is limited by poor internal charge separation and sluggish surface reaction kinetics of photocatalysts. Bismuth oxybromide has attracted attention due to its favorable structure, but it suffers from rapid photo-generated charge recombination and low surface reactivity. In this work, Nb-doped BiOBr (Nb-BiOBr) nanosheets were successfully fabricated via a facile hydrothermal method. The incorporation of Nb atoms into the BiOBr lattice introduces impurity energy levels within the band structure, which broadens visible-light absorption and prolongs the average lifetime of charge carriers. As a result, the optimized Nb-BiOBr achieves a high CO production rate of 20.68 μmol g –1 h −1 , which is 4.3 times that of the undoped BiOBr. Density functional theory calculations reveal that Nb doping effectively modulates the adsorption and evolution of reaction intermediate. The Gibbs free energy change (Δ G ) of the critical *CO 2 to *COOH conversion step is reduced from 0.89 eV to 0.54 eV (vs. SHE). This work demonstrates that the strategic metal doping can overcome kinetic limitations by tailoring intermediate adsorption, providing a viable design strategy for high-performance photocatalysts for CO 2 conversion. The introduction of Nb-induced impurity levels endowed the BiOBr photocatalyst with high CO selectivity and production rate in CO 2 photoreduction. Download: Download high-res image (122KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jiangtao Hao,Yiren Zhang,Limeng Song,Fengming Yang,Huacheng Zhu,Yu Chen,Qianqian Chen,Qichao Ding,Mengru Li,Xuewen Jiang,Xinglai Yuan,Fan Zhang,Wei Li,Rui Zhang,Bingbing Fan
A novel method combining electrospinning with microwave CO 2 plasma torch sintering produces flexible TiO 2 nanofibers. • The TiO 2 fibers achieve excellent electromagnetic wave absorption with an RL min of −44.8 dB and an EAB max of 6.0 GHz. • Radar cross-section simulations of flexible TiO 2 nanofibers demonstrated a maximum reduction of 28.15 dB·m 2 . Flexible oxide nanofibers are attractive for conformal electromagnetic wave (EMW) absorption, yet rapid ceramic crystallization without sacrificing bendability remains challenging. Here, we report an ultrafast route that couples molecularly regulated electrospinning with atmospheric-pressure microwave CO 2 plasma torch sintering to fabricate flexible, defect-rich TiO 2 nanofibers. The chelated titanium sol enables continuous electrospinning, while plasma treatment at 8 kW converts precursor fibers into TiO 2 within 3 min. Multiphysics simulations reveal localized electromagnetic-thermal field coupling mechanism and a plasma core temperature approaching 7000 K, which explains the rapid precursor-to-TiO 2 conversion and the formation of nanocrystalline/amorphous interfaces under ultrafast heating-cooling conditions. Electron paramagnetic resonance and X-ray photoelectron spectroscopy confirm abundant oxygen-vacancy-related paramagnetic centers and weak surface Ti 3+ species, while transmission electron microscopy and off-axis electron holography reveal nanocrystalline/amorphous interfaces and interfacial charge accumulation. Furthermore, the obtained TiO 2 nanofibers achieve a minimum reflection loss (RL min ) of −44.8 dB at 1.8 mm and a maximum effective absorption bandwidth (EAB max ) of 6 GHz at 2.1 mm. Radar cross-section (RCS) simulations further show a maximum reduction of 28.15 dB·m 2 , indicating potential application for advanced microwave absorption. This work establishes microwave CO 2 plasma torch sintering as a rapid strategy for flexible oxide nanofibers and clarifies how plasma-induced defects and interfaces enhance EMW dissipation. Download: Download high-res image (377KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
ZhenXiang Xu,Yuan Gao,JingLiang Wang,YunHuan Li,YiPeng Zhao,Xin Meng,Xia Feng,Li Chen,YiPing Zhao
Bio-based porous adsorbents for multicomponent air purification are often constrained by limited active-site density, insufficient control over hierarchical pore architectures, and inadequate mechanical robustness. Herein, chitosan was functionalized with poly(amidoamine) (PAMAM) dendrimers of different generations and combined with carboxymethyl cellulose (CMC) and UiO-66-NH 2 to construct nitrogen-enriched composite aerogels. The effects of PAMAM generation and UiO-66-NH 2 loading on the pore architecture, surface chemistry, mechanical response, and pollutant-capture performance of the aerogels were systematically evaluated. The optimized CG 2 MUNA-2 aerogel exhibited a well-connected porous network and sustained a compressive stress of 13.62 MPa at 80% strain. It achieved a CO 2 uptake of 0.64 mmol·g −1 at 273.15 K and a formaldehyde adsorption capacity of 1.57 mmol g −1 , while retaining 92.4% of its initial formaldehyde adsorption capacity after five adsorption-desorption cycles. When incorporated into cigarette filter rods, CG 2 MUNA-2 reduced CO, CO 2 , and total particulate matter by 30.87%, 14.01%, and 62.58%, respectively. Its superior overall performance was associated with a favorable balance among accessible amine functionalities, pore connectivity, and UiO-66-NH 2 dispersion. These results indicate that the coordinated regulation of PAMAM generation and MOF loading offers a rational materials-design strategy for developing biopolymer-based aerogels for multicomponent air-pollutant capture and cigarette-smoke purification. Download: Download high-res image (278KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Gaoqing Cao,Zhimin Feng,Haitao Yuan,Shiyue Ren,Yue Lei,Lihong Hu,Yingnan Duan,Weizun Li,Zhurui Shen
Cd vacancies precisely anchor Pt/Pd sub-nanoclusters to boost interfacial electron transfer. • The vacancy-stabilized PtPd interface steers the CO 2 reduction pathway toward CH 4 . • DFT and in situ DRIFTS unveil stabilized intermediates (*CH 3 O) and suppressed CO desorption. • The optimized catalyst achieves a 119.5-fold enhancement in CH 4 yield over pristine CdS. Selective photoreduction of CO 2 to deeply hydrogenated products remains challenging due to the competitive formation of CO and insufficient surface hydrogenation capability. Herein, a vacancy-stabilized Pt/Pd sub-nanoclusters interface is constructed on a Cd-based semiconductor to preferentially facilitate surface reaction pathways toward CH 4 production. Cd vacancies are proposed to serve as preferential anchoring and electronic modulation centers, promoting the formation of Pt/Pd interfacial sites with strong metal support interactions, and facilitating electron transfer. Multiple characterization techniques confirm that the Pt/Pd sub-naoclusters interface is preferentially stabilized at vacancy-rich regions and exhibits pronounced electronic coupling. In situ DRIFTS reveals the emergence of key hydrogenated intermediates on the Pt/Pd interfacial surface, indicating a surface-mediated pathway shift from CO desorption to deep hydrogenation. Density functional theory (DFT) calculations further confirm enhanced CO 2 activation and stabilization of hydrogenation intermediates at the vacancy-coupled Pt/Pd sub-nanoclusters. Compared to pristine CdS and Cd 1-x S, the Pt/Pd-Cd 1-x S photocatalyst achieved 119.5-fold and 14.9-fold enhancements in CH 4 yield, respectively. Consequently, the engineered interfacial surface achieves a significantly enhanced methane selectivity during CO 2 photoreduction. This work highlights the important role of vacancy-mediated dual metal interfaces in promoting surface reaction pathways and provides new insights into the rational design of selective CO 2 photoreduction catalysts from a surface science perspective. Download: Download high-res image (169KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Shunfa Gao,Xia Wang,Jun Yang,Xiangyan Dou,Ning Liu,Zihui Meng,Wenfang Liu
Porous carbon nitride integrates photocatalytic and enzyme carrier functions. • Co-localizing shortens NADH shuttle distance between photo-enzyme active sites. • Reaction kinetics of photocatalysis, enzyme, and overall PECS are analyzed. • The integrated system achieves a remarkable formate yield of 6.01 mM after 5 h. • The integrated system shows 96 h operation stability and attains a TON of 430. Enzyme catalyzed CO₂ reduction to formic acid integrated with photocatalytic cofactor regeneration presents a sustainable solution for conversion of greenhouse gas into fuel and high added-value chemicals, where photocatalyst and enzyme carrier are commonly derived from distinct materials, increasing the system complexity and mass transfer distance. In this study, mesoporous carbon nitride (MPCN) and two kinds of hierarchical porous carbon nitride (HPCN-CS and HPCN-CUS) with excellent photocatalytic performance were modified with polyethyleneimine (PEI) and then used as a carrier to immobilize formate dehydrogenase (FDH), and an integrated photo-enzyme coupled system (PECS) was constructed. With the initial addition of 2 mM NAD + , formic acid production after 5 h was separately 6.01, 2.28, and 4.48 mM for three systems. Furthermore, PEI-MPCN-FDH showed a robust continuous operation stability under light irradiation, and the turnover number of cofactor reached 430 after 96 h. Kinetic analysis revealed that PECS can be accurately described by an exponential model, while the photocatalytic reaction follows first-order kinetics and the enzyme reaction obeys Michaelis–Menten equation. This work made the first attempt for a systematic investigation of photocatalyst-enzyme composite and the reaction kinetics, providing a guidance for the design and optimization of a sustainable and efficiency artificial photosynthesis system. Download: Download high-res image (216KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Yang Wang,Meili Ding,Jiani Chen,Jianfeng Yao
Biomimetic ZIF-L/MXene were prepared by a facile two-step synthetic route. • Microflower structure favors light harvesting and active site exposure. • MXene can expand the photoresponse into the near-infrared region. • ZIF-L/MX-0.8 achieves efficient photodriven CO2 fixation under ambient conditions. • The photothermal/photocatalytic synergistic mechanism was explored. Solar-driven carbon dioxide (CO 2 ) transformation into valuable carbon-based products is of high significance for simulating natural carbon cycling. However, the ongoing challenge lies in the design of photocatalysts for achieving efficient CO 2 conversion. In this study, inspired by natural wisdom, ZIF-dia/MXene microflowers are successfully constructed through [Zn(NH 3 ) 4 ] 2+ -induced self-assembly of Ti 3 C 2 T x MXene (T x = –F, –OH, =O) sheets followed by the in-situ growth of ZIF-DIA. Remarkably, the optimized ZIF-dia/MX-0.8 serving as a solar-triggered photothermal and photocatalytic bifunctional platform was found to catalyze the coupling of CO 2 and epichlorohydrin, with a cyclic carbonate yield of 98% under full spectrum illumination for 6 h, significantly surpassing the single components. Specifically, the hierarchical flower-like superstructure consisting of ZIF-dia and MXene sheets can favor light absorbance via multiple reflection and facilitate the exposure of active sites and mass transfer. In addition, this ZIF-dia/MXene composite can absorb the light covering the entire visible region owing to the presence of MXene, thereby enhancing the photothermal conversion. Furthermore, experimental results reveal that the CO 2 cycloaddition with epoxide over ZIF-dia/MX-0.8 is proved to be the synergy of photothermal catalysis and photocatalysis. This work enriches the design of MOF-containing photocatalysts, opening a unique and sustainable way to solve global environmental issues. Download: Download high-res image (165KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Journal of Physical Chemistry C
·
2026
·
IF 3.4
Jingyi Zhang,Jiaming Wu,Yuren Zhao,Keyan Li,Xinwen Guo
Photocatalytic conversion of CO2 and H2O into syngas offers a green and sustainable pathway for the production of chemical feedstocks. However, most high-yield syngas production systems rely on a noble metal photosensitizer or cocatalyst, making it challenging to obtain cost-effective syngas. In this work, we designed and prepared S-scheme TiO2/CN heterojunctions with varying mass ratios by calcining the mixture of NH2-MIL-125(Ti) and pristine carbon nitride (CN). The combination of TiO2 with CN significantly enhances visible light absorption, and the formation of an S-scheme heterojunction effectively improves the separation and migration of photogenerated carriers. In addition, the enlarged specific surface area as well as the enhanced CO2 adsorption capacity also promote the photocatalytic CO2 reduction. Without any noble metal photosensitizer or cocatalyst, the 150TiO2/CN heterojunction demonstrated excellent performance to produce syngas. The production rates of CO and H2 are 6.2 and 1.9 mmol g–1 h–1, respectively, and the syngas production rate was 3.4 and 29.5 times that of pure CN and TiO2, respectively, when high-purity CO2 is used as the feed gas and the ratio of H2O/MeCN in solvent is 1:4. By adjustment of the composition of feed gas and solvent, high yield syngas with widely tunable CO/H2 ratios from 3.3:1 to 1:3.7 was achieved, and the maximum syngas production rate reached 12.1 mmol g–1 h–1. This work provides insights into the design of highly efficient photocatalysts for CO2 conversion to fuels or chemicals.
✓ 已验证
DOI
高影响因子
LANGMUIR
·
2026
·
IF 4.4
Yuchen Li,Chenguang Li,Xue Wang,Mingjun Zhou,Lei Wang,Cheng Fang,Gongde Wu,Jing Ding,Hui Wan,Guofeng Guan
CO2 hydrogenation to ethanol is a promising pathway for carbon utilization, yet it remains challenged by the deactivation of iron-based catalysts due to water byproducts and the difficulty in controlling product selectivity. To address these issues, this work constructed hydrophobic MWCNT-supported K–FeCu bimetallic catalysts and systematically investigated their structure–activity relationships. The optimized catalyst (Fe/Cu = 0.5) exhibited superior performance at 320 °C and 4 MPa, achieving a CO2 conversion of 41.1%, with ethanol selectivity and space-time yield (STY) reaching 28.91% and 175.91 mg·gcat–1·h–1, respectively. Mechanistic studies revealed that the intrinsic hydrophobicity of MWCNT facilitated water desorption to preserve the active Fe5C2 phase. Synergistically, Cu promoted Fe reduction via hydrogen spillover, while K inhibited excessive hydrogenation, facilitating the C–C coupling of RWGS-derived CHxO* and CHx* intermediates at the interface. This study highlighted the importance of hydrophobic surface engineering, providing a strategy for designing catalysts for CO2 hydrogenation to ethanol.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2026
·
IF 4.6
Weijie Zhou,Yuzi Zhang,Chaoyue Li,Xiangyang He,Zhichao Miao,Jinglin Mu,Manfen Liang,Jin Zhou
In 2 O 3 supported on ZrO 2 and CeO 2 was developed for CO 2 -to-formate electroreduction. • Distinct support effects of ZrO 2 and CeO 2 on In 2 O 3 active site were identified. • CeO 2 tunes electronic structure of In species and boosts the catalytic performance. • In 2 O 3 /CeO 2 delivers higher current density and Faradaic efficiency than In 2 O 3 /ZrO 2 . • The In 2 O 3 /CeO 2 catalyst maintains stable operation for 50 h at 100 mA cm −2 . Developing efficient electrocatalysts for the selective CO 2 electroreduction to formate is important for achieving carbon neutrality. Herein, In 2 O 3 /ZrO 2 and In 2 O 3 /CeO 2 catalysts were fabricated by combining MOF-derived oxide supports with incipient wetness impregnation and subsequent thermal treatment. Comparative studies reveal that CeO 2 affords a more favorable catalyst-support interface than the ZrO 2 support, resulting in enhanced activity and selectivity for formate production. In a flow cell, the optimized In 2 O 3 /CeO 2 catalyst achieves a formate Faradaic efficiency of 90.0% at −1.37 V vs. RHE with a current density of 177 mA cm −2 , significantly outperforming the In 2 O 3 /ZrO 2 catalyst. Combined structural characterization and kinetic analysis indicate that the CeO 2 support improves the electronic structure of In species, thereby facilitating the adsorption and conversion of key intermediates and thereby improving the intrinsic reactivity for formate formation. Moreover, the In 2 O 3 /CeO 2 catalyst maintains stable operation for 50 h at 100 mA cm −2 . This work highlights the critical role of support effects in regulating In-based active sites and provides insights into the rational design of efficient catalysts for the selective CO 2 -to-formate electroreduction. A series of In 2 O 3 /ZrO 2 and In 2 O 3 /CeO 2 catalysts were prepared for ECR to formate. The CeO 2 affords a more favorable catalyst-support interface than the ZrO 2 support, resulting in enhanced activity and selectivity for formate production. Download: Download high-res image (117KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jingjing Wu,Dazhi Shen,Tingjie Mao,Jiacheng Liu,Juan Wang,Xujin Zhang,Juan Ding,Yudai Huang,Xiaoqing Huang,Yunhua Li
Tuning Sn dispersion switches CO 2 RR path, challenging site-activity dogma • Low Sn dispersion density highly stabilizes *OCHO, strongly favoring it over *COOH • 89.3% formate FE at 200 mA cm −2 under flow-cell conditions surpasses prior reports • Catalyst reconstruction and reaction species are analyzed by in situ experiments Electrocatalytic CO 2 reduction to CO and formate holds significant industrial promise. Herein, we reveal that the surface density of atomically dispersed Sn on Cu lattice modulates the active-site identity from Cu to Cu Sn, thereby switching product distributions. L-Sn 1 -Cu, featuring sparse Sn coverage, achieves a CO Faradaic efficiency (FE) of 72.8% at a current density of 300 mA cm −2 . Conversely, H-Sn 1 -Cu with saturated Sn isolation attains a formate FE of 89.3% at a current density of 200 mA cm −2 . Operando spectroscopy and DFT calculations show that Sn-deficient locales expose Cu atoms to bind *COOH and favor CO formation, while Sn-congested domains create polarized Cu Sn pairs that lock *OCHO for formate synthesis. This density-dependent ensemble tuning enables switchable selectivity between CO and formate in CO 2 electroreduction at industrially relevant current densities. By precisely tuning the lattice dispersion density of single-atom Sn on Cu, this work achieves a programmable selectivity inversion from *COOH-mediated CO production on sparse Sn sites to *OCHO-stabilized formate synthesis via polarized Cu Sn ensembles at industrially relevant current densities. Download: Download high-res image (54KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子