JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 28
·1-8
·
IF 2.8
Liu Xingzhen,Dong Daniel Y.,Zhou Huizi,Huang Weijun,Qian Weijin
Different types of carbon nanotube (CNT) nanomaterials were fabricated using electrophoretic deposition (EPD) and chemical vapor deposition (CVD) methods to make the field emission (FE) and thermo-electrochemical cell (TEC) electrodes. The morphological and structural properties of CNT electrodes were characterized by SEM, Raman, and TEM. The graphite multi-walled CNT (MWNT) electrode by EPD (EPD-GMWNT) exhibited the best FE properties with the turn on field and threshold field of 1.7 and 2.97 V·μm −1 , respectively. In addition, EPD-GMWNT electrodes presented the best TEC properties with the current density of 2.09 mA·m −2 , the maximum power density of 0.37 W·m −2 , and the relative power conversion efficiency of 0.85%, at the temperature difference of 50 °C. MWNT electrode by CVD growth also demonstrated good FE and TEC performances. Both types of emitters, especially GMWNTs, possess low ratio of the D band peak to the G band peak (I D /I G ), implying the extreme importance of structural crystallinities of CNTs for FE and TEC applications. The results suggest that construction of MWNT electrodes with low I D /I G ratio might be a promising way for the practical applications of FE and TEC devices.
✓ 已验证
DOI
高影响因子
Cell Discovery
·
2024
·Vol. 10
·期 1
·1-7
·
IF 13
Li Yang,Chen Zhi-Peng,Xu Da,Wang Liang,Cheng Meng-Ting,Zhou Cong-Zhao,Chen Yuxing,Hou Wen-Tao
Human ABC transporters ABCD1–3 are all localized on the peroxisomal membrane and participate in the β-oxidation of fatty acyl-CoAs, but they differ from each other in substrate specificity. The transport of branched-chain fatty acids from cytosol to peroxisome is specifically driven by ABCD3, dysfunction of which causes severe liver diseases such as hepatosplenomegaly. Here we report two cryogenic electron microscopy (cryo-EM) structures of ABCD3 bound to phytanoyl-CoA and ATP at resolutions of 2.9 Å and 3.2 Å, respectively. A pair of phytanoyl-CoA molecules were observed in ABCD3, each binding to one transmembrane domain (TMD), which is distinct from our previously reported structure of ABCD1, where each fatty acyl-CoA molecule strongly crosslinks two TMDs. Upon ATP binding, ABCD3 exhibits a conformation that is open towards the peroxisomal matrix, leaving two extra densities corresponding to two CoA molecules deeply embedded in the translocation cavity. Structural analysis combined with substrate-stimulated ATPase activity assays indicated that the present structures might represent two states of ABCD3 in the transport cycle. These findings advance our understanding of fatty acid oxidation and the molecular pathology of related diseases.
✓ 已验证
DOI
高影响因子
Biotechnology for Biofuels and Bioproducts
·
2024
·Vol. 17
·期 1
·1-13
·
IF 3.3
Wu Yilu,Su Changsheng,Liao Zicheng,Zhang Gege,Jiang Yongjie,Wang Yankun,Zhang Changwei,Cai Di,Qin Peiyong,Tan Tianwei
Background The effective valorization of lignin and carbohydrates in lignocellulose matrix under the concept of biorefinery is a primary strategy to produce sustainable chemicals and fuels. Based on the reductive catalytic fractionation (RCF), lignin in lignocelluloses can be depolymerized into viscous oils, while the highly delignified pulps with high polysaccharides retention can be transformed into various chemicals. Results A biorefinery paradigm for sequentially valorization of the main components in poplar sawdust was constructed. In this process, the well-defined low-molecular-weight phenols and bioethanol were co-generated by tandem chemo-catalysis in the RCF stage and bio-catalysis in fermentation stage. In the RCF stage, hydrogen transfer reactions were conducted in one-pot process using Raney Ni as catalyst, while the isopropanol (2-PrOH) in the initial liquor was served as a hydrogen donor and the solvent for lignin dissolution. Results indicated the proportion of the 2-PrOH in the initial liquor of RCF influenced the chemical constitution and yield of the lignin oil, which also affected the characteristics of the pulps and the following bioethanol production. A 67.48 ± 0.44% delignification with 20.65 ± 0.31% of monolignols yield were realized when the 2-PrOH:H 2 O ratio in initial liquor was 7:3 (6.67 wt% of the catalyst loading, 200 °C for 3 h). The RCF pulp had higher carbohydrates retention (57.96 ± 2.78 wt%), which was converted to 21.61 ± 0.62 g/L of bioethanol with a yield of 0.429 ± 0.010 g/g in fermentation using an engineered S. cerevisiae strain. Based on the mass balance analysis, 104.4 g of ethanol and 206.5 g of lignin oil can be produced from 1000 g of the raw poplar sawdust. Conclusions The main chemical components in poplar sawdust can be effectively transformed into lignin oil and bioethanol. The attractive results from the biorefinery process exhibit great promise for the production of valuable biofuels and chemicals from abundant lignocellulosic materials.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2024
·Vol. 15
·期 1
·1-8
·
IF 14.7
Wang Guang,Fan Hongzhao,Li Jiawang,Li Zhigang,Zhou Yanguang
Improving interfacial thermal transport is crucial for heat dissipation in devices with interfaces, such as electronics, buildings, and solar panels. Here, we design a strategy by utilizing the water adsorption-desorption process in porous metal-organic frameworks (MOFs) to tune the interfacial heat transfer, which could benefit their potential in cooling or heat dissipation applications. We observe a changeable thermal conductance across the solid/porous MOF interfaces owing to the dense water channel formed by the adsorbed water molecules in MOFs. Our experimental and/or modeling results show that the interfacial thermal conductance of Au/Cu 3 (BTC) 2 , Au/Zr 6 O 4 (OH) 4 (BDC) 6 and Au/MOF-505 heterointerfaces is increased up to 7.1, 1.7 and 3.1 folds by this strategy, respectively, where Cu 3 (BTC) 2 is referred to as HKUST-1 and Zr 6 O 4 (OH) 4 (BDC) 6 is referred to as UiO-66. Our molecular dynamics simulations further show that the surface tension of Au layer will cause the adsorbed water molecules in MOFs to gather at the interfacial region. The dense water channel formed at the interfacial region can activate the high-frequency lattice vibrations and act as an additional thermal pathway, and then enhance heat transfer across the interfaces significantly. Our findings revealed the underlying mechanisms for tailoring thermal transport at the solid/porous MOF heterointerfaces by water adsorbates, which could motivate and benefit the new cooling system design based on MOFs.
✓ 已验证
DOI
高影响因子
Nano Research
·
2024
·Vol. 17
·期 6
·5559-5568
·
IF 9.5
Wu Junpeng,Teng Xinru,Liu Lu,Cui Hongzhi,Li Xiaoyi
Triboelectric nanogenerators (TENG) have emerged as a highly promising energy harvesting technology, attracting significant attention in recent years for their broad applications. Gel-based TENGs, with superior stretchability and sensitivity, have been widely reported as wearable sensors. However, the traditional hydrogel-based TENGs suffer from freezing at low temperatures and drying at high temperatures, resulting in malfunctions. In this study, we introduce an anti-freezing eutectogel, which uses a deep eutectic solvent (DES), to improve the stability and electrical conductivity of TENGs in harsh environmental conditions. The eutectogel-based TENG (E-TENG) produces an open-circuit voltage of 776 V, a short-circuit current of 1.54 µA, and a maximum peak power of 1.1 mW. Moreover, the E-TENG exhibits exceptional mechanical properties with an elongation at a break of 476% under tension. Importantly, it maintains impressive performances across a wide temperature range from −18 to 60 °C, with conductivities of 2.15 S/m at −10 °C and 1.75 S/m at −18 °C. Based on the excellent weight stability of the E-TENG sensor, motion sensing can be achieved in the air, and even underwater. Finally, the versatility of the E-TENG can serve as a wearable sensor, by integrating it with Bluetooth technology. The self-powered E-TENG can monitor various human motion signals in realtime and send the health signals directly to mobile phones. This research paves a new road for the applications of TENGs in harsh environments, offering wireless flexible sensors with real-time health signal monitoring capabilities.
✓ 已验证
DOI
高影响因子
Journal of Translational Medicine
·
2024
·Vol. 22
·期 1
·1-16
·
IF 6.1
Xiong Yi,Chen Jiawen,Liang Wei,Li Kun,Huang Yingqi,Song Jingwen,Zhang Baoyu,Qiu Xiusheng,Qiu Dongbo,Zhang Qi,Qin Yunfei
Background Liver surgery during the perioperative period often leads to a significant complication known as hepatic ischemia-reperfusion (I/R) injury. Hepatic I/R injury is linked to the innate immune response. The cGAS-STING pathway triggers the activation of innate immune through the detection of DNA within cells. Nevertheless, the precise mechanism and significance of the cGAS-STING pathway in hepatic I/R injury are yet to be investigated. Methods Mouse model of hepatic I/R injury was used in the C57BL/6 WT mice and the STING knockout (STING-KO) mice. In addition, purified primary hepatocytes were used to construct oxygen-glucose deprivation reperfusion (OGD-Rep) treatment models. Results Our research revealed a notable increase in mRNA and protein levels of cGAS and STING in liver during I/R injury. Interestingly, the lack of STING exhibited a safeguarding impact on hepatic I/R injury by suppressing the elevation of liver enzymes, liver cell death, and inflammation. Furthermore, pharmacological cGAS and STING inhibition recapitulated these phenomena. Macrophages play a crucial role in the activation of the cGAS-STING pathway during hepatic I/R injury. The cGAS-STING pathway experiences a significant decrease in activity and hepatic I/R injury is greatly diminished following the elimination of macrophages. Significantly, we demonstrate that the activation of the cGAS-STING pathway is primarily caused by the liberation of mitochondrial DNA (mtDNA) rather than nuclear DNA (nDNA). Moreover, the safeguarding of the liver against I/R injury is also attributed to the hindrance of mtDNA release through the utilization of inhibitors targeting mPTP and VDAC oligomerization. Conclusions The results of our study suggest that the release of mtDNA plays a significant role in causing damage to liver by activating the cGAS-STING pathway during I/R injury. Furthermore, inhibiting the release of mtDNA can provide effective protection against hepatic I/R injury.
✓ 已验证
DOI
PubMed
高影响因子
Scientific Reports
·
2024
·Vol. 14
·期 1
·1-15
·
IF 3.8
Ding Yangyang,Huang Keke,Sun Cheng,Liu Zelin,Zhu Jinli,Jiao Xunyi,Liao Ya,Feng Xiangjiang,Guo Jingjing,Zhu Chunhua,Zhai Zhimin,Xiong Shudao
Bruton tyrosine kinase inhibitor (BTKi) combined with rituximab-based chemotherapy benefits diffuse large B-cell lymphoma (DLBCL) patients. However, drug resistance is the major cause of relapse and death of DLBCL. In this study, we conducted a comprehensive analysis BTKi-resistance related genes (BRRGs) and established a 10-gene (CARD16, TRIP13, PSRC1, CASP1, PLBD1, CARD6, CAPG, CACNA1A, CDH15, and NDUFA4) signature for early identifying high-risk DLBCL patients. The resistance scores based on the BRRGs signature were associated with prognosis. Furthermore, we developed a nomogram incorporating the BRRGs signature, which demonstrated excellent performance in predicting the prognosis of DLBCL patients. Notably, tumor immune microenvironment, biological pathways, and chemotherapy sensitivity were different between high- and low-resistance score groups. Additionally, we identified TRIP13 as a key gene in our model. TRIP13 was found to be overexpressed in DLBCL and BTKi-resistant DLBCL cell lines, knocking down TRIP13 suppresses cell proliferation, promotes cell apoptosis, and enhances the apoptosis effect of BTKi on DLBCL cells by regulating the Wnt/β-catenin pathway. In conclusion, our study presents a novel BRRGs signature that could serve as a promising prognostic marker in DLBCL, and TRIP13 might be a potential therapeutic target for resistant DLBCL.
✓ 已验证
DOI
高影响因子
Nature Chemical Biology
·
2024
·
IF 12.9
Wang Shiwen,Liu Min,Hu Dongping,Dong Zhicheng,Zhao Zhong
Superoxide anion is thought to be a natural by-product with strong oxidizing ability in all living organisms and was recently found to accumulate in plant meristems to maintain stem cells in the shoot and undifferentiated meristematic cells in the root. Here we show that the DNA demethylase repressor of silencing 1 (ROS1) is one of the direct targets of superoxide in stem cells. The Fe–S clusters in ROS1 are oxidized by superoxide to activate its DNA glycosylase/lyase activity. We demonstrate that superoxide extensively participates in the establishment of active DNA demethylation in the Arabidopsis genome and that ARABIDOPSIS RESPONSE REGULATOR 12 acts downstream of ROS1-mediated superoxide signaling to maintain stem cell fate. Our results provide a mechanistic framework for superoxide control of the stem cell niche and demonstrate how redox and DNA demethylation interact to define stem cell fate in plants.
✓ 已验证
DOI
PubMed
高影响因子
Nano Research
·
2024
·
IF 9.5
Chen Jieshuangyang,Lei Jie,Zhou Jinwei,Chen Xuanfeng,Deng Rongyu,Qian Mingzhi,Chen Ya,Wu Feixiang
The development of electrocatalysts with high catalytic activity is conducive to enhancing polysulfides adsorption and reducing activation energy of polysulfides conversion, which can effectively reduce polysulfide shuttling in Li-S batteries. Herein, a novel catalyst NiCo-MoO x /rGO (rGO = reduced graphene oxides) with ultra-nanometer scale and high dispersity is derived from the Anderson-type polyoxometalate precursors, which are electrostatically assembled on the multilayer rGO. The catalyst material possesses dual active sites, in which Ni-doped MoO x exhibits strong polysulfide anchoring ability, while Co-doped MoO x facilitates the polysulfides conversion reaction kinetics, thus breaking the Sabatier effect in the conventional electrocatalytic process. In addition, the prepared NiCo-MoO x /rGO modified PP separator (NiCo-MoO x /rGO@PP) can serve as a physical barrier to further inhibit the polysulfide shuttling effect and realize the rapid Li + migration. The results demonstrate that Li-S coin cell with NiCo-MoO x /rGO@PP separator shows excellent cycling performance with the discharge capacity of 680 mAh·g −1 after 600 cycles at 1 C and the capacity fading of 0.064% per cycle. The rate performance is also impressive with the remained capacity of 640 mAh·g −1 after 200 cycles even at 4 C. When the sulfur loading is 4.0 mg·cm −2 and electrolyte volume/sulfur mass ratio (E/S) ratio is 6.0 μL·mg −1 , a specific capacity of 830 mAh·g −1 is achieved after 200 cycles with a capacity decay of 0.049% per cycle. More importantly, the cell with NiCo-MoO x /rGO@PP separator exhibits cycling performance under wide operating temperature with the reversible capacities of 518, 715, and 915 mAh·g −1 after 100 cycles at −20, 0, and 60 °C, respectively. This study provides a new design approach of highly efficient catalysts for sulfur conversion reaction in Li-S batteries.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2019
·Vol. 38
·期 1
·53-62
·
IF 2.804
Chen Tao,Zhong Guo-Cheng,Zhang Yuan-Ting,Zhao Li-Ming,Qiu Yong-Jun
Novel bio-based and biodegradable block copolymers were synthesized by “click” reaction between poly(L-lactide) (PLLA) and polyamide 4 (PA4). Upon tuning the molar mass of PLLA block, the properties of copolymers and electrospun ultrafine fibers were investigated and compared with those of PLLA and PA4 blends. PLLA and PA4 were found incompatible and formed individual crystalline regions, along with reciprocal inhibition in crystallization. Electrospun fibers were highly hydrophobic, even if hydrophilic PA4 was the rich component. The crystallinity of either PLLA or PA4 decreased after electrospinning and PLLA-rich as-spun fibers were almost amorphous. Immersion tests proved that fibers of block copolymers were relatively homogeneous with micro-phase separation between PLLA and PA4. The fibrous structures of copolymers were different from those of the fibers electrospun from blends, for which sheath-core structure induced by macro-phase separation between homopolymers of PLLA and PA4 was confirmed by TEM, EDS, and XPS.
✓ 已验证
DOI
高影响因子
Systems Microbiology and Biomanufacturing
·
2023
·
IF 0
Li Xuemei,Zhang Rui,Li Jianjiong,Feng Jinhui,Wu Qiaqing,Zhu Dunming,Ma Yanhe
Cholesterol and phytosterols can be served as the substrates for Actinobacteria to produce the precursors used in the synthesis of steroidal medicines. Cytochrome P450s from CYP125 and CYP142 families initiates the metabolism of cholesterol and/or phytosterols. In this study, we demonstrate the functional redundancy and substrate preference of five cytochrome CYP125s and CYP142s by the unmarked cyp genes deletion strains of Mycobacterium neoaurum NRRL B-3805. CYP125-3 was found to be responsible for the catalytic hydroxylation of both cholesterol and the C24-branched side-chains of phytosterols, while CYP142-2 can only oxidize cholesterol and/or cholest-4-en-3-one. The strain harboring the CYP125-3 produced 6.47 g l − 1 and 5.13 g l − 1 of 4-androstene-3,17-dione (AD) when 15 g l − 1 cholesterol or 17.5 g l − 1 phytosterols used, respectively. While, the strain harboring the CYP142-2 produced 7.10 g l − 1 AD when 15 g l − 1 cholesterol used. The other three cytochrome P450s have a smaller contribution for the degradation of cholesterol and phytosterols. CYP125-3 has the hydroxylation activity on more substrates than that of CYP142-2. This study provided possible guidance to improve the efficiency of AD and other metabolites production from different kinds of sterols by the genetic manipulation.
✓ 已验证
DOI
Systems Microbiology and Biomanufacturing
·
2022
·
IF 0
Zhu Jiufeng,Bai Yajun,Fan Tai-Ping,Zheng Xiaohui,Cai Yujie
Ethyl ( R )-4-chloro-3-hydroxybutyrate (( R )-CHBE), as a chiral intermediate, is widely used in the synthesis of various chiral drugs. In this study, we screened two aldo–keto reductases (LP-AKRs) from the probiotic Lactobacillus plantarum DSM20174, both with a molecular weight of approximately 31 kDa. Both enzymes could reduce 4-chloroacetoacetic acid ethyl ester (COBE) to produce ( R )-CHBE with an enantioselectivity value of 99%. When determining the kinetic parameter, the K m , K cat , and V max of LP-AKR5 and LP-AKR9 were 9.5 mM, 7.6 U/mg, 3.96 s −1 and 8.7 mM, 8.59 U/mg, 4.47 s −1 , respectively. Both LP-AKR5 and LP-AKR9 had an optimal reaction pH of 6 and could maintain a high level of stability at pH 6, allowing them to perform well in an acidic environment. LP-AKR5 and LP-AKR9 had optimal reaction temperatures of 30 °C and 40 °C, respectively. Metal ions had minimal influence on LP-AKR5 and LP-AKR9 enzyme activities. This series of enzymatic properties showed that LP-AKR5 and LP-AKR9 mined from Lactobacillus plantarum DSM20174 could asymmetrically catalyze the synthesis of ( R )-CHBE under weakly acidic circumstances, which could maintain product stability and provide a good foundation for industrial production.
✓ 已验证
DOI