文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3937至3948个,产品总数6,840个

切换升序
Co2
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2026 · IF 3.9

Inhibitory Effects on the Degradation Behavior of Amine-Functionalized MOF-Based Adsorbents for CO2 Direct Air Capture

Hao Dong,Fengsheng Liu,Tao Wang,Yimeng Chen,Junlong Wei,Mengxiang Fang,Kun Yang,Xiang Gao

Solid amine-based adsorption using metal–organic frameworks (MOFs) has shown great potential in direct air capture (DAC) due to its excellent CO2 selectivity and adsorption capacity. Incorporation of amine functional groups into MOFs significantly enhances CO2 uptake, but the adsorption performance is highly dependent on the activity of surface amine groups, which are prone to irreversible degradation. This study systematically investigates the degradation behavior and structural evolution of MOF-based solid amine adsorbents under complex environmental conditions, elucidating the degradation products and underlying mechanisms. Thermal degradation leads to reduced crystallinity and pore structure collapse, while also inducing linear condensation reactions at amine sites that form urea-linkage fragments, thereby impairing adsorption performance. Oxidative degradation breaks C–N bonds in amine groups, generating carboxylic acids and releasing ammonia, accompanied by framework rearrangement and loss of active sites. A benefit from the topological protection provided by the three-dimensional MOF framework and strong coordination between metal centers and amine groups, which effectively inhibited the degradation behavior of N-(2-aminoethyl) ethanolamine (AEEA) (both thermal degradation and oxidative degradation) is enabling the MOF adsorbent to have better antidegradation performance compared to pure AEEA. After 5 weeks of high-pressure oxidative treatment, the amine utilization remains at 45.83%, representing a 30.9% improvement over AEEA and a 10.97% reduction in performance loss. A coupled reaction model was established to describe the synergistic effects of thermal and oxidative degradation, and a first-order kinetic equation was developed to predict long-term degradation behavior. This study provides both theoretical insight and practical guidance for the long-term stable operation of MOF-based solid amine adsorbents.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Chem Catalysis · 2026 ·Vol. 6 ·期 2 · IF 10.7

Synchronized elementary step regulation and local environment control for metal-cation-free CO2 electroreduction to formic acid

Huijun Lv,Rui Zhang,Rafikul Ali Saha,Abhisek Bandyopadhyay,Ruilin Wei,Gengfeng Zheng,Yongzheng Zhang,Weihua Ning,Yuhang Wang

Formic acid is the most economically viable CO 2 electroreduction product, but its production faces challenges due to instability during long-term electrolysis and additional costs associated with acidifying the CO 2 -derived formate salt. Both issues arise from the use of electrolytes containing metal cations. Metal-cation-free acidic CO 2 electrolysis can potentially clean the two hurdles, yet the absence of the cation effect overwhelmingly favors H 2 evolution over formic acid formation. Here, we utilize a catalyst derived from Cs 2 AgBiBr 6 perovskites, featuring highly dispersed Ag nanoparticles supported by hybridized Bi 0 /Bi 2 O 2 CO 3 nanosheets, to synchronously increase local alkalinity and facilitate ∗OCHO intermediate formation. A metal-cation-free acidic CO 2 electrolyzer equipped with this catalyst offers Faradaic efficiencies of more than 75% at industrially relevant current densities, with a CO 2 -to-HCOOH utilization efficiency of 50%. Under 90-h electrolysis at 200 mA cm −2 and 3.5 V, Faradaic efficiencies of ∼70% are achieved, representing a >65% improvement in formic acid productivity compared to the state of the art.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2026 · IF 8.8

Pressure-resilient facilitated CO2 transport in layer-by-layer assembled IL-QD/mGO nanocomposite hollow fiber membranes

Ook Choi,Kyungwhan Min,Eun-Kyu Sun,Kavya Adot Veetil,Tae-Hyun Kim

Pressure-resilient facilitated-transport membranes are highly desirable for practical CO 2 capture, yet maintaining efficient CO 2 transport under elevated feed pressures remains a major challenge due to the inherent pressure dependence of facilitated transport. Herein, we report a nanocomposite hollow fiber membrane fabricated by infiltrating poly(1-vinyl imidazolium) (PVI) into a polyimide (Matrimid® 5218) hollow fiber support (outer diameter: 650 μm, inner diameter: 510 μm), followed by the layer-by-layer (LbL) assembly of ionic liquid-functionalized quantum dots (IL-QDs) and modified graphene oxide (mGO) via interfacial polymerization. Thermal trimerization of PVI at 150 °C induces the formation of triazine structures, promoting polymer-chain rearrangement that increases free volume and CO 2 sorption sites, thereby facilitating CO 2 dissolution and diffusion. Simultaneously, the alternating LbL architecture enables IL-QDs to function as nanoscale spacers that suppress irreversible π–π stacking of mGO nanosheets, generating continuous CO 2 -philic transport pathways. Benefiting from these synergistic structural effects, the optimized membrane achieved a CO 2 permeance of 16 GPU and a CO 2 /N 2 selectivity of 112 while exhibiting substantially reduced pressure dependence of separation performance. Furthermore, the membrane maintained stable mixed-gas separation performance and excellent long-term operational stability. This work presents a nanostructure engineering strategy for constructing pressure-resilient facilitated-transport hollow fiber membranes, providing new design insights for practical post-combustion CO 2 capture.

CAS / MDL: 1072-63-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2026 ·Vol. 14 ·期 5 ·124172 · IF 7.5

In-situ generation of appropriate mixed-valence tin oxides on carbon nanofibers tuning CO2 reduction to formate

Wei Han,Xian Yue,Lu Liu,Fuzhi Li,Xianbo Yu,Hu Chen,Xiaoxue Xi,Shuao Xie,Zhongbo Hu,Huaxin Li,Junhui Xiang

Excessive carbon dioxide emissions and the energy crisis trigger ongoing challenges. To address these issues, the electrochemical carbon dioxide reduction reaction (CO 2 RR) has emerged as a sustainable pathway for converting CO 2 into valuable chemicals. Among various products, formic acid has attracted widespread attention due to its broad industrial application prospects. Although tin-based catalysts are cost-effective and accessible, they still face challenges including active site aggregation and insufficient long-term stability. In this study, mixed-valence SnO x was supported on bacterial cellulose (BC) surface via an in-situ impregnation method. Sn/SnO/Sn 2 O 3 /SnO 2 @CNFs, Sn/Sn 2 O 3 /SnO 2 @CNFs, and Sn/SnO 2 @CNFs catalysts with different phase composition and oxygen vacancies (OVs) concentrations were obtained by simply changing the heat treatment temperature (400∼600°C). In situ Fourier transform infrared spectroscopy (FTIR) confirmed that synergistic interaction between mixed-valence SnOx species and the CNFs facilitated adsorption and stabilization of the key intermediate *OCHO to drive CO 2 conversion to formate. Density functional theory (DFT) calculations proved that Sn/Sn 2 O 3 /SnO 2 @CNFs catalyst with moderate OVs concentrations exhibits stronger adsorption capacity for *OCHO. Systematic characterization demonstrated that the CNFs not only provide a high specific surface area (871.71 m 2 ·g −1 ) to promote active site exposure but also stabilize the oxidation states of SnO x . Especially, the Sn/Sn 2 O 3 /SnO 2 @CNFs catalyst prepared at 500°C exhibited the highest Faradaic efficiency for formate (93.53%) while maintaining persistent stability for 60 h. In summary, the synergistic effect between porous CNFs and Sn/Sn 2 O 3 /SnO 2 with moderate OVs concentrations plays a key role in promoting CO 2 conversion to formate. This work provides a promising approach for the rational design of efficient and stable tin-based CO₂RR catalysts toward formate production.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2026 · IF 19.7

Dynamic interfacial proton-electron synchronization on MOF-derived Ag2O/TiO2 heterojunctions for steering CO2 photoreduction to methane

Jiaman Wang,Zekai Cui,Yuechang Wei,Zhiling Tang,Jing Xiong,Yingli Wang,Xiong Wang,Xuanzhen Li,Yunpeng Liu,Zhen Zhao

MOF-derived Ag 2 O/TiO 2 p-n heterojunction enhances charge separation. • Ag 2 O acts as a proton shuttle, enabling selective CO 2 reduction to CH 4 . • In-situ DRIFTS and DFT reveal the key role of *CO protonation. • Achieves 27.89 μmol g −1 h −1 CH 4 rate with 85.87% selectivity. The photocatalytic conversion efficiency of CO 2 with H 2 O to hydrocarbons is dependent on the simultaneous enrichment of protons and electrons. Herein, the composite photocatalyst of Ag 2 O/TiO 2 were constructed by anchoring Ag 2 O species onto the MOF-derived TiO 2 support via a laser deposition technique. The optimally engineered Ag 2 O/TiO 2 photocatalyst exhibited a remarkable CH 4 selectivity of 85.87% with a formation rate of 27.89 μmol g −1 h −1 in the photocatalytic reduction of CO 2 to CH 4 , surpassing the near-zero CH 4 yield of pristine MIL-125(Ti). By combining the results of in situ DRIFT spectra and density functional theory calculations, the photocatalytic mechanism is proposed: The catalytic interface effectively overcomes the kinetic bottleneck of *CO hydrogenation, by synchronously delivering enriched protons from the Ag 2 O sites and photogenerated electrons from the MOF-derived TiO 2 support. This targeted facilitation of the critical *CO protonation step suppresses intermediate desorption which dictates the selectivity toward CH 4 . This work unveils a universal strategy of coupling robust MOF-derived microenvironments with dynamic proton-electron delivery to overcome kinetic limitations in multi-step catalytic processes. Download: Download high-res image (277KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2026 · IF 3.9

Nitrogen-Doped Carbon Aerogels Derived from Zn-MOF/Alginate Composites for Dual-Function CO2 Adsorption and Supercapacitors

Jundi Xiong,Jian Yu,Yuan Wang,Shaojun Yuan

Carbon aerogels are emerging as promising functional materials; however, their application in adsorption and energy storage is hindered by the inherently low density of active sites. Herein, ZIF-8/N-doped alginate-derived carbon aerogels (ZSCA) were synthesized via in situ growth of ZIF-8 on freeze-dried alginate aerogel precursors and subsequent treatment of pyrolysis and chemical activation for high-performance CO2 capture and supercapacitor applications. In this strategy, ZIF-8 served as a structural template, alginate provided a biomass-derived carbon source, polyethylenimine (PEI) acted as a nitrogen dopant and a costructure director, and potassium citrate functioned as the activating agent. The optimized ZSCA-550-1 (pyrolyzed at 550 °C with an activator-to-precursor mass ratio of 1:1) showed a high specific surface area of 811.34 m2/g, a micropore volume of 0.31 cm3/g, and a nitrogen content of 8.77 wt %. At 273.15 and 298.15 K (1 bar), ZSCA-550-1 achieved excellent CO2 adsorption capacities of 5.96 and 4.40 mmol/g, respectively, outperforming both SA-550-1 (2.79 mmol/g) and ZPC-550-1 (3.20 mmol/g). It also showed high CO2/N2 selectivity (35.0) and retained 94% capacity after 10 adsorption–desorption cycles. As a supercapacitor electrode, ZSCA-650-1 delivered 214 F/g at 1 A/g, with 88.6% capacitance retention over 5000 charge–discharge cycles at 10 A/g. This study introduces a sustainable strategy for the design and engineering of biomass-derived carbon aerogels with dual functionality in CO2 capture and electrochemical energy storage.

CAS / MDL: 693-98-1 9002-98-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF NANOPARTICLE RESEARCH · 2026 ·Vol. 28 ·期 7 ·180 · IF 3.5

Designing of Ag/CdSe/g-C3N4 nanocomposite for CO2 conversion and dye degradation: insight into the mechanism

Ali Zubair,Khan Iltaf,Wang Chunjuan,Ali Farman,Mujahid Laiba,Zaman Saeed,Arif Umar,Chen Xiaohu,Ali Nisar

Dyes represent a major class of water pollutants worldwide, posing significant threats to aquatic ecosystems and the environment due to their discharge into industrial wastewater without treatment. Thus, before releasing organic colors and their derivatives into rivers, they must be degraded using heterogeneous photocatalysts. Similarly, burning fossil fuels releases massive amounts of CO 2 into the atmosphere, exacerbating global warming and environmental devastation. Herein, we report the design and fabrication of Ag/CdSe/g-C 3 N 4 (i.e., Ag/CdSe/CN) as a highly efficient photocatalyst for the degradation of Toluidine Blue dye and CO 2 conversion to value-added products. X-ray diffraction analysis confirmed the crystalline nature of the as-synthesized photocatalyst. SEM and TEM analysis revealed that Ag and CdSe nanoparticles are uniformly dispersed on the surface of a 2D sheet-like structure for CN. The photocatalytic performance of the photocatalysts was explored at different parameters such as dye and photocatalyst doses, pH, and time. The as-fabricated Ag/CdSe/CN photocatalyst revealed exceptional performance for Toluidine Blue dye degradation under visible light irradiation, with a notable 92.3% degradation at pH 13, which is remarkably higher than those of the CdSe/CN, CdSe, and CN photocatalysts. Additionally, the Ag/CdSe/CN photocatalyst revealed outstanding performance for visible light catalytic CO 2 conversion to CH 4 (i.e., 9 μmol g⁻ 1  h⁻ 1 ) and CO (28 μmol g⁻ 1  h⁻ 1 ), in comparison to the reference samples. This work will provide a new route for the design and fabrication of highly efficient photocatalysts for environmental applications. Graphical abstract Graphical abstract showing the design of Ag/CdSe/g-C 3 N 4 nanocomposite for CO 2 conversion and dye degradation

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2026 · IF 8.8

Interfacial engineering of ZIF-8/MXene membranes with hydrophilic–hydrophobic channels: CO2 nanobubble-mediated microalgal carbon fixation

Ping Shi,Xinghao Liu,Jian Qiu,Jian Lu,Wenbo Jiang,Weihu Zhang,Xingjian Sun,Mengying Ou,Jianfa Zhao,Yu Guo,Quanyu Zhao,Yuan Bai,Wenheng Jing

Microalgal carbon sequestration offers a promising pathway for CO 2 mitigation, yet its efficiency is largely constrained by inherently low gas-liquid mass transfer. Herein, we report an interfacial engineering strategy to construct a ZIF-8/MXene composite membrane via pressure-assisted filtration. The membrane features unique hydrophilic–hydrophobic channels, wherein hydrophilic MXene nanosheets and hydrophobic ZIF-8 nanosheets act synergistically to effectively decouple bubble refinement from mass transfer resistance. This structural design enables the stable generation of monodisperse CO 2 nanobubbles with a mode diameter of 118.2 nm and the concentration of 1.62 × 10 9 particles mL −1 . The potential electrostatic adsorption facilitated by natural divalent cations in the BG-11 medium significantly shortens the mass transfer distance. Consequently, this promotes the formation of a localized CO 2 pseudo supersaturated microenvironment around the microalgae. This localized CO 2 enrichment potentially downregulates the carbon-concentrating mechanism, suggesting a strategic reallocation of cellular energy toward accelerated biomass accumulation. Consequently, the integrated system achieves an unprecedented biomass productivity of 0.76 g L −1 , offering an innovative material-biological paradigm for light-driven carbon capture and utilization.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Defect-rich flexible TiO2 nanofibers enabled by ultrafast microwave CO2 plasma torch sintering for electromagnetic wave absorption

Jiangtao Hao,Yiren Zhang,Limeng Song,Fengming Yang,Huacheng Zhu,Yu Chen,Qianqian Chen,Qichao Ding,Mengru Li,Xuewen Jiang,Xinglai Yuan,Fan Zhang,Wei Li,Rui Zhang,Bingbing Fan

A novel method combining electrospinning with microwave CO 2 plasma torch sintering produces flexible TiO 2 nanofibers. • The TiO 2 fibers achieve excellent electromagnetic wave absorption with an RL min of −44.8 dB and an EAB max of 6.0 GHz. • Radar cross-section simulations of flexible TiO 2 nanofibers demonstrated a maximum reduction of 28.15 dB·m 2 . Flexible oxide nanofibers are attractive for conformal electromagnetic wave (EMW) absorption, yet rapid ceramic crystallization without sacrificing bendability remains challenging. Here, we report an ultrafast route that couples molecularly regulated electrospinning with atmospheric-pressure microwave CO 2 plasma torch sintering to fabricate flexible, defect-rich TiO 2 nanofibers. The chelated titanium sol enables continuous electrospinning, while plasma treatment at 8 kW converts precursor fibers into TiO 2 within 3 min. Multiphysics simulations reveal localized electromagnetic-thermal field coupling mechanism and a plasma core temperature approaching 7000 K, which explains the rapid precursor-to-TiO 2 conversion and the formation of nanocrystalline/amorphous interfaces under ultrafast heating-cooling conditions. Electron paramagnetic resonance and X-ray photoelectron spectroscopy confirm abundant oxygen-vacancy-related paramagnetic centers and weak surface Ti 3+ species, while transmission electron microscopy and off-axis electron holography reveal nanocrystalline/amorphous interfaces and interfacial charge accumulation. Furthermore, the obtained TiO 2 nanofibers achieve a minimum reflection loss (RL min ) of −44.8 dB at 1.8 mm and a maximum effective absorption bandwidth (EAB max ) of 6 GHz at 2.1 mm. Radar cross-section (RCS) simulations further show a maximum reduction of 28.15 dB·m 2 , indicating potential application for advanced microwave absorption. This work establishes microwave CO 2 plasma torch sintering as a rapid strategy for flexible oxide nanofibers and clarifies how plasma-induced defects and interfaces enhance EMW dissipation. Download: Download high-res image (377KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

PAMAM generation-regulated chitosan/carboxymethyl cellulose–UiO-66-NH2 aerogels for CO2, formaldehyde, and cigarette-smoke purification

ZhenXiang Xu,Yuan Gao,JingLiang Wang,YunHuan Li,YiPeng Zhao,Xin Meng,Xia Feng,Li Chen,YiPing Zhao

Bio-based porous adsorbents for multicomponent air purification are often constrained by limited active-site density, insufficient control over hierarchical pore architectures, and inadequate mechanical robustness. Herein, chitosan was functionalized with poly(amidoamine) (PAMAM) dendrimers of different generations and combined with carboxymethyl cellulose (CMC) and UiO-66-NH 2 to construct nitrogen-enriched composite aerogels. The effects of PAMAM generation and UiO-66-NH 2 loading on the pore architecture, surface chemistry, mechanical response, and pollutant-capture performance of the aerogels were systematically evaluated. The optimized CG 2 MUNA-2 aerogel exhibited a well-connected porous network and sustained a compressive stress of 13.62 MPa at 80% strain. It achieved a CO 2 uptake of 0.64 mmol·g −1 at 273.15 K and a formaldehyde adsorption capacity of 1.57 mmol g −1 , while retaining 92.4% of its initial formaldehyde adsorption capacity after five adsorption-desorption cycles. When incorporated into cigarette filter rods, CG 2 MUNA-2 reduced CO, CO 2 , and total particulate matter by 30.87%, 14.01%, and 62.58%, respectively. Its superior overall performance was associated with a favorable balance among accessible amine functionalities, pore connectivity, and UiO-66-NH 2 dispersion. These results indicate that the coordinated regulation of PAMAM generation and MOF loading offers a rational materials-design strategy for developing biopolymer-based aerogels for multicomponent air-pollutant capture and cigarette-smoke purification. Download: Download high-res image (278KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2026 · IF 6.6

Vacancy-stabilized Pt/Pd bimetallic sub-nanocluster interfaces for promoting the photoconversion pathway of CO2 to CH4

Gaoqing Cao,Zhimin Feng,Haitao Yuan,Shiyue Ren,Yue Lei,Lihong Hu,Yingnan Duan,Weizun Li,Zhurui Shen

Cd vacancies precisely anchor Pt/Pd sub-nanoclusters to boost interfacial electron transfer. • The vacancy-stabilized PtPd interface steers the CO 2 reduction pathway toward CH 4 . • DFT and in situ DRIFTS unveil stabilized intermediates (*CH 3 O) and suppressed CO desorption. • The optimized catalyst achieves a 119.5-fold enhancement in CH 4 yield over pristine CdS. Selective photoreduction of CO 2 to deeply hydrogenated products remains challenging due to the competitive formation of CO and insufficient surface hydrogenation capability. Herein, a vacancy-stabilized Pt/Pd sub-nanoclusters interface is constructed on a Cd-based semiconductor to preferentially facilitate surface reaction pathways toward CH 4 production. Cd vacancies are proposed to serve as preferential anchoring and electronic modulation centers, promoting the formation of Pt/Pd interfacial sites with strong metal support interactions, and facilitating electron transfer. Multiple characterization techniques confirm that the Pt/Pd sub-naoclusters interface is preferentially stabilized at vacancy-rich regions and exhibits pronounced electronic coupling. In situ DRIFTS reveals the emergence of key hydrogenated intermediates on the Pt/Pd interfacial surface, indicating a surface-mediated pathway shift from CO desorption to deep hydrogenation. Density functional theory (DFT) calculations further confirm enhanced CO 2 activation and stabilization of hydrogenation intermediates at the vacancy-coupled Pt/Pd sub-nanoclusters. Compared to pristine CdS and Cd 1-x S, the Pt/Pd-Cd 1-x S photocatalyst achieved 119.5-fold and 14.9-fold enhancements in CH 4 yield, respectively. Consequently, the engineered interfacial surface achieves a significantly enhanced methane selectivity during CO 2 photoreduction. This work highlights the important role of vacancy-mediated dual metal interfaces in promoting surface reaction pathways and provides new insights into the rational design of selective CO 2 photoreduction catalysts from a surface science perspective. Download: Download high-res image (169KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Porous carbon nitride as photocatalyst and enzyme carrier simultaneously for sustainable CO2 enzyme reduction to solar fuel

Shunfa Gao,Xia Wang,Jun Yang,Xiangyan Dou,Ning Liu,Zihui Meng,Wenfang Liu

Porous carbon nitride integrates photocatalytic and enzyme carrier functions. • Co-localizing shortens NADH shuttle distance between photo-enzyme active sites. • Reaction kinetics of photocatalysis, enzyme, and overall PECS are analyzed. • The integrated system achieves a remarkable formate yield of 6.01 mM after 5 h. • The integrated system shows 96 h operation stability and attains a TON of 430. Enzyme catalyzed CO₂ reduction to formic acid integrated with photocatalytic cofactor regeneration presents a sustainable solution for conversion of greenhouse gas into fuel and high added-value chemicals, where photocatalyst and enzyme carrier are commonly derived from distinct materials, increasing the system complexity and mass transfer distance. In this study, mesoporous carbon nitride (MPCN) and two kinds of hierarchical porous carbon nitride (HPCN-CS and HPCN-CUS) with excellent photocatalytic performance were modified with polyethyleneimine (PEI) and then used as a carrier to immobilize formate dehydrogenase (FDH), and an integrated photo-enzyme coupled system (PECS) was constructed. With the initial addition of 2 mM NAD + , formic acid production after 5 h was separately 6.01, 2.28, and 4.48 mM for three systems. Furthermore, PEI-MPCN-FDH showed a robust continuous operation stability under light irradiation, and the turnover number of cofactor reached 430 after 96 h. Kinetic analysis revealed that PECS can be accurately described by an exponential model, while the photocatalytic reaction follows first-order kinetics and the enzyme reaction obeys Michaelis–Menten equation. This work made the first attempt for a systematic investigation of photocatalyst-enzyme composite and the reaction kinetics, providing a guidance for the design and optimization of a sustainable and efficiency artificial photosynthesis system. Download: Download high-res image (216KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。