JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Lijun Hu,Yi-Meng Du,Rui Liu,Shisheng Yang,Hongliang Tang,Xue-Zan Yin,Qianxiang Xiao,Xiangke Wang,Hongqing Wang
Photocatalytic hydrogen peroxide (H 2 O 2 ) generation on the catalyst surface from oxygen is an electron-demanding process, making the construction of an electron-rich surface highly advantageous. In this study, a localized electric field was observed on the surface of polymeric carbon nitride (g-C 3 N 4 ) when alkali metal cations were adsorbed onto it. These fields effectively inhibited surface carrier recombination and extended their lifespan, thereby enhancing H 2 O 2 production. As a result, g-C 3 N 4 achieved a superior H 2 O 2 yield of 2.25 mM after 1 h in a 0.25 M K + solution, which was 2.06 times greater than that (1.09 mM) achieved in a pure solvent. Notably, the increase in photocatalytic efficiency showed a remarkable dependence on ion species. At low concentrations, H 2 O 2 generation efficiency was in the order of Li + < Na + < K + < Rb + < Cs + . However, after optimizing the ion concentration, the highest H 2 O 2 production was achieved in a solution containing K + instead of Cs + . Molecular dynamics simulations and temperature-dependent photocatalysis experiments revealed that the synergistic interaction between adsorption energy and adsorption distance was crucial in governing the extent to which alkali metal cation adsorption enhanced g-C 3 N 4 photocatalytic H 2 O 2 production. This study provides theoretical insights for the design of materials for electron-demanding photocatalysis and aids in understanding variations in photocatalytic behavior in natural waters.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2024
·
IF 4
Xueqi Duan,Guona Li,Zhijian Jia,Hongzhen Xie,Xing Li
Copper is an essential element in the human body. Excess accumulations of copper, however, would become a potential threat. Therefore, it is of great significance to detect copper ions. Owing to their controllable morphology, dispersal characteristics, high extinction coefficient, and easily functionalized surfaces, gold nanoparticles (AuNPs) have been highly employed as attractive sensing probes for environmental and biological analyses. We herein propose an eco-friendly colorimetric strategy based on AuNPs modified with 3-pyridinylboronic acid (PA) for sensitive and selective detection of copper ions (Cu 2+ ) in water at trace level. The color changes of the system from wine-red to gray-blue with increasing amounts of copper ions is due to the binding of AuNPs modified with 3-pyridinylboronic acid to copper ions, which in turn leads to the aggregation of AuNPs with fine anti-interference. Strengths of the work: 1) rapid response time without complex pre-treatment; 2) high sensitivity with low limit of detection (LOD) and the good linear relationship ( R 2 = 0.98, LOD = 3.0 μM by the naked eye and 72 nM by ultraviolet-visible spectroscopy); 3) high selectivity under other interfering ions. In addition, the detection mechanism of this work has been successfully confirmed by density functional theory (DFT), transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction (XRD), Zeta potential analysis and ultraviolet-visible spectroscopy (UV–vis).
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2024
·
IF 8
Zhuoqun Su,Youlin Kong,Tong Li,Yan Zhao,Xue Zhang,Di Wu,Yongning Wu,Guoliang Li
Biological nanopore refers to a type of pore-forming membrane proteins, providing a unique platform for single molecule detection of DNA, RNA, peptide, etc. The direct detection of small molecules, especially of food chemical contaminants by biological nanopore, remains challenging due to their fast translocation dynamics, trace amount, and the interference from the complex food matrix. The effective recognition and signal conversion methods need to be developed. Herein, we employ an aptamer-triggered hybridization chain reaction (AtHCR) strategy for the detection of a mycotoxin, aflatoxin B1 (AFB1) by an α -hemolysin nanopore. In the absence of AFB1, the formed dsDNA polymers in HCR show a low frequency of long-time blockage signals. The presence of AFB1 can inhibit the hybridization chain reaction through the interaction between AFB1 and its aptamer, so the remaining hairpins can easily block the nanopore and induce frequent long-time blockage signals. The results show that the event frequency of long-blockage has a linear relationship with the AFB1 concentration in the range of 6.6 × 10 −1 –6.6 × 10 2 pmol/L. The recognition and amplification effect of AtHCR allows nanopore to detect AFB1 at a detection limit of 0.54 pmol/L. Furthermore, the developed AtHCR strategy can help biological nanopore to detect AFB1 in corn sample with satisfactory accuracy. The recognition and amplification effect achieved by coupling AtHCR to biological nanopore offers an enzyme-free single-molecule technology for the rapid detection of food chemical contaminants.
✓ 已验证
产品关联
DOI
高影响因子
ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY
·
2024
·
IF 3
Ma Licheng,Qi Jungang,Gao Leqi,Wei Tao,Guo Yanhua
In this study, a cesium ion imprinted polymer (Cs(I)-IIP) was prepared by free radical thermal polymerization using 18-crown-6-ether (18C6) as ligand, methacrylic acid (MAA) as functional monomer, and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent, which can be used for adsorption and separation of cesium ions from low-concentration solutions. The adsorption kinetic and isotherm results showed that the adsorption of Cs + fitted to the pseudo-second-order kinetic model and Langmuir model, indicating that the adsorption of Cs + on Cs(I)-IIP was the monolayer chemical adsorption. The maximum adsorption capacity was 84.21 mg·g − 1 . The selective adsorption properties are performed in Cs + , Li + , Na + , and K + multicomponent systems. The results showed that the Cs(I)-IIP has a high selectivity in the presence of coexisting Li + , Na + , and K + , and the selectivity coefficients ( K’ ) of Cs(I)-IIP for Cs + /Li + , Cs + /Na + , Cs + /K + are 2.1, 1.56, and 1.33, respectively. The high adsorption capacity and selectivity are attributed to the introduction of imprinting technology to form specific Cs + recognition adsorption sites, and the 18C6 cavity was easier to recognize Cs + in the competitive adsorption process. Finally, the Cs(I)-IIP can be regenerated and reused for 10 times with the adsorption capacity only decreased by 8.1%, indicating that the polymer has good reuse performance.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry C
·
2024
·
IF 5.7
Xiao Wang,Yanyan Li,Haitao Tang,Ruiming Li,Xiaodi Hao,Meng Li,Jiale Zhao,Liyan Yang,Yu Chen,Qianqian Lin,Mufang Li,Dong Wang
Double halide perovskites are widely utilized in photocatalysis, photovoltaics, and light emission owing to their nontoxicity and chemical stability. Their excellent temperature-dependent optoelectronic properties also provide the potential for temperature sensing. However, most double halide perovskites typically exhibit low photoluminescence quantum yields due to indirect bandgaps and parity-forbidden transitions, limiting their further applications. Here, we report the synthesis of Cs2NaInCl6 double perovskites via the hydrothermal method, introducing Sb3+ to enhance broad blue emission. Additionally, Mn²⁺ co-doping is employed to achieve tunable dual emission, ensuring the phase stability and efficient luminescence output of the Cs2NaInCl6. By testing photoluminescence spectra at a broad working temperature ranging from 300 to 500 K, a visible color change from purple to dark salmon was observed as the temperature increased, resulting in higher absolute and relative temperature sensitivity of 0.008 K-1 and 1.2% K-1, respectively. Furthermore, Cs2NaInCl6:Sb3+-Mn2+ was integrated into the fiber or attached it to the fiber surface. Under varying temperatures, the fiber exhibited a color change, demonstrating that Sb³⁺-Mn²⁺ co-doped Cs₂NaInCl₆ is a promising material for fiber-based optical temperature sensing in temperature and safety monitoring applications.. Notably, the thermal behavior of the sensor enables its application in wearable flexible display, lighting and anti-counterfeiting.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry C
·
2024
·Vol. 12
·期 15
·5615-5622
·
IF 5.7
Qianrong Jin,Jinrong Shi,Jianwei Jin,Wenli Xu,Suqin Chen,Yuexiao Pan
Efficient and versatile materials that are both non-toxic and environmentally sustainable have become paramount in our pursuit of greener and more durable illumination solutions. In this study, we investigated the optical properties of rare-earth-based all-inorganic perovskite (AIP) crystal Cs2NaGdCl6 (CNGC) with various substitutions to explore its potential applications in lighting devices. The primitive crystal CNGC exhibits intrinsic blue emission due to its self-trapped excitons (STEs) but singly-doping with Bi3+ ions results in weak blue emission, indicating quenching of the STE emission. Alloying by introducing Ag+ ions into the CNGC:Bi3+ lattice, replacing the Na+ ions, caused the disruption of the crystal field symmetry, which lifts the parity-forbidden selection rule and allows for s–p transitions of the Bi3+ ions. Thus, the co-doping with Ag+ ions in addition to Bi3+ leads to intense broad-band warm white emission covering a wide spectral range of 470–800 nm, with a correlated color temperature (CCT) of 4512 K and a color rendering index (CRI) of 79. The findings from this study provide valuable insights for the development of efficient and high-quality lighting devices using a simple technique.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2024
·
IF 8.4
Xiansong Shi,Xingyuan Wang,Tianci Feng,Tong Ju,Jianghai Long,Congcong Yin,Zhe Zhang,Yong Wang
Permanently microporous materials have evolved as focal point of research for tackling issues in separation science and membrane technology. Covalent organic frameworks (COFs) stand out for their distinctive synergy of crystalline nature, uniform channels, and structural diversities. Three-dimensional (3D) COFs, distinguished by angstrom-sized and interconnected channels, hold special promise for separating small targets; however, this potential remains underexplored. Here, we report feasible growth of cationic 3D COF membranes on a flexible polymer substrate for versatile nanofiltration toward both molecules and ions. Through comprehensive performance evaluations, we reveal that the resultant membrane exhibits durable and prominent molecular selectivity to separate fine species with molecular weights above 300 g mol -1 at fast methanol permeation. Lanthanide ions of industrial value also can be harvested by the membrane with rejection rates of up to 91.4%. Together with its nonselectivity to competing ions, our membrane implements efficient extraction of rare earth elements from ion mixtures. These findings illuminate the potential of 3D COFs for liquid separation and offer a solution to building versatile membranes.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Run Gan,Yanqing Zu,Tong Zhang,Chengzhang Yang,Chujie Wang,Binglin Zeng,Peitao Liu,Xiaodong Li,Fengbo Han,Yu Qian,Lei Zhao,Ailing Feng,Zhaoxin Wu
The lead-free perovskite Cs 2 ZrCl 6 has recently attracted huge interest in X-ray imaging application. However, it generally exhibits unsatisfactory stability originating from the intrinsically ionic structure and low formation energy, which will hinder the future application. Herein, we design different anchoring groups (amino, sulfhydryl and thiocyanate) mediated nucleation and growth process for synthesis of Cs 2 ZrCl 6 crystals coated by SiO 2 nanospheres, achieving Cs 2 ZrCl 6 @SiO 2 -X (X = NH 2 , SH, SCN) composites, respectively. Among these three samples, Cs 2 ZrCl 6 @SiO 2 -SCN has an impressive photoluminescence quantum yield (PLQY) of 89 %. More importantly, it also manifests outstanding stability toward light illumination, heat and moisture. Such high PLQY and robust stability stem from the isolation effect due to tight anchoring, which separate perovskite crystals from each other and prevent particle aggregation. Finally, a large-area (113 cm 2 ) scintillation screen based on Cs 2 ZrCl 6 @SiO 2 -SCN@poly(dimethylsiloxane) (PDMS) and a commercial thin-film transistor (TFT) panel (16 cm × 13 cm, 125 μm pixel size) were used to fabricate an X-ray imaging detector, which showed a spatial resolution up to 4 lp mm −1 beyond the upper limit of TFT panel and high-quality imaging capability of static objects. It is believed that this scintillator screen has a potential application in next-generation indirect X-ray detection and imaging.
✓ 已验证
产品关联
DOI
高影响因子
INORGANICA CHIMICA ACTA
·
2017
·
IF 2.002
Muhammad Ali Khan,Yan-Yan Li,Shang-Xiong Huang-Fu,Hong Chen,Li-Jun Zhang,Peng-Fei Liu,Ju-Song Yu,Rui-Huan Duan,Ling Chen
A new anhydrous mixed alkali metals borophosphate, Li 3 Cs 2 BP 4 O 14 , has been synthesized by the solid-state reaction. Single crystal X-ray diffraction analysis reveals that the title compound crystallized in a tetragonal geometry with space group of P 4 2 / mbc (No. 135) and cell parameters of a = 10.3413(5) Å, b = 10.3413(5) Å, c = 12.042(2) Å. Its one-dimensional (1D) chain structure is constructed by fundamental building unit (FBU) of [B(P 2 O 7 ) 2 ] 5− which contains P–O–P connections with B:P = 1:4. Thermal analysis, UV–Vis-near-IR diffuse reflectance spectroscopy, IR spectroscopy and theoretical calculations have been well performed on this new borophosphate compound.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2024
·
IF 5.3
Lili Han,Jihao Zhao,Yifan Miao,Wenqian Zhou,Minglang Yuan,Jinghao Cui,Zhipeng Ci
Copper-based halides have emerged as promising scintillator materials for X-ray imaging, attributed to their favorable photophysical characteristics, such as negligible self-absorption, high light output, and fast decay. Within this category of materials, Cs 3 Cu 2 Cl 5 composite polymer scintillator films stand out, delivering excellent performance as flexible X-ray detector screens. However, severe scattering and light degradation induced by the inevitable agglomeration during recombination restricted the application in high-resolution and flexible X-ray imaging. In this study, a Cs 3 Cu 2 Cl 5 @PMMA film prepared by in-situ growth strategy is successfully developed, which represents uniform area, adjustable flexibility and excellent scintillation performance. The prepared large-area film exhibits green emission at 527 nm, with a high light yield, low detection limit and excellent spatial resolution. Meanwhile, the Cs 3 Cu 2 Cl 5 @PMMA film exhibits a remarkable degree of flexibility, enabling imaging applications on non-planar surfaces. Furthermore, it also demonstrates excellent resistance to high temperature environment, maintaining its high-quality imaging performance at 403 K.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
You Li,Sai Xu,Yuefeng Gao,Yongze Cao,Xizhen Zhang,Hongquan Yu,Yichao Wang,Tianshuo Liu,Baojiu Chen
The intrinsic challenge to thermally responsive photoluminescent materials is pertaining to the limited thermal stability and reproducibility. Most prevailing photoluminescent agents suffer from constraints imposed by their frail chemical structure , rendering them fail to work at elevated temperatures for a long time. This inherent limitation curtails their utility within domains in anti-counterfeiting and encoded information storage. Herein, a series of double perovskite Cs 2 NaInCl 6 : Sb 3+ /Ln 3+ (Ln = Er, Dy, Tb, Ho) phosphors were synthesized using the high-temperature hydrothermal method . Upon ultraviolet light illumination, the blue emission band of self-trapped excitons (STEs) and intrinsic emissions of Ln 3+ are observed. In light of the variations in thermal quenching levels of the two emission centers and the effect of temperature on the lifetime of Ln 3+ , multi-mode thermometers with superior sensitivity are established. Moreover, they also can be used in anti-counterfeiting and encoding information storage, relying on the significant temperature-dependent color variation, excellent thermal stability and repeatability. The unique thermochromic properties and satisfactory stability of Cs 2 NaInCl 6 : Sb 3+ /Ln 3+ (Ln = Er, Dy, Tb, Ho) phosphors bring forward a new concept of developing multi-mode thermometers and reliable information encryption systems with the application of thermochromic materials.
✓ 已验证
产品关联
DOI
高影响因子
CRYSTENGCOMM
·
2024
·Vol. 26
·期 10
·1418-1429
·
IF 2.6
Jun Liao,Sihao Ye,Xupeng Zhu,Wenfeng Fu,Shuwen Xue,Jing Qi,Jun Zhang
Kesterite Cu2ZnSnS4 (CZTS) is considered as one of the most promising thin-film solar cell and photocatalytic materials; however, its efficiency in practical photoelectric applications is often seriously limited by the presence of large numbers of Cu–Zn antisite defects. Alloying with Ag to fabricate Ag-alloyed CZTS ((AgxCu1−x)2ZnSnS4, ACZTS) can reduce the Cu–Zn antisite defects in CZTS, but few research studies have been able to separately clarify the effect of Ag content and growth temperature on large-sized (AgxCu1−x)2ZnSnS4 single crystals. In this study, centimeter-scale high-quality ACZTS single crystals were synthesized via an Ag-alloying strategy by a molten salt method for the first time. The results showed that the synthesized ACZTS have a high-quality single-crystal structure. A series of experiments was performed using various characterization techniques and it was found that Ag content and growth temperature were crucial in determining the size of ACZTS single crystals obtained through a molten salt method and that the associated CZTS base generated at high temperature was beneficial for further ACZTS single-crystal growth in this high-temperature environment. The experimental results showed that the growth mechanism of ACZTS crystals prepared using a molten salt method could be attributed to a type of epitaxial growth process. Our study provides a promising approach for growing large-sized ACZTS single crystals with high quality that can provide a potential single-crystal platform for the study of light-emitting diodes, photocatalytic hydrogen production, etc.
✓ 已验证
产品关联
DOI
高影响因子