ACS Applied Energy Materials
·
2025
·
IF 5.5
Azhagar Samy,Raja Palani,Yi-Shiuan Wu,She-Huang Wu,Jeng-Kuei Chang,Arshid Numan,Rajan Jose,Chun-Chen Yang
Rechargeable lithium-oxygen (Li-O2) batteries are at the forefront of energy storage technology. Yet, they face critical challenges, including poor capacity, high overpotential at the oxygen cathode, inefficient lithium utilization, oxygen crossover, and the troublesome growth of lithium dendrites. This study provides an innovative solution using a graphene nanosheet (GNS) composite nickel ferrite (NiFe2O4) (NiFe2O4@GNS) catalyst and ZIF-8 particles decorated glass fiber (GF) (ZIF-8@GF) separator. Remarkably, the in situ grown ZIF-8@GF composite separator boosts higher ionic conductivity (∼2.87 × 10–3 S cm–1) and transport number (tLi+ ∼ 0.58). The modified catalyst and separator performed significantly better than the unmodified analogs in terms of specific capacity and cycling stability. In short, the device using the ZIF-8@GF separator and NiFe2O4@GNS catalyst goes up to 500 cycles without any charge polarization at 300 mA·g–1 and 500 mAh·g–1. In contrast, the corresponding cycle number for the cell with an unmodified separator even using the modified catalyst is ∼209 cycles with high charge polarization. These studies reveal that the modified separator effectively minimizes oxygen and I–/I3– redox crossover, captures anions, accelerates lithium-ion transport, and prevents the harmful intermediates (like O2– or LiO2), which can drastically degrade the organic electrolyte. Furthermore, the insulating characteristics of the ZIF-8@GF membrane deter direct electron transport to ZIF-8 nanoparticles during lithium peroxide formation, thus ensuring uninterrupted access to catalytic anion trapping sites.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2025
·
IF 7.3
Xinglei Cui,Zhonglian Li,Yizhuo Wang,Long Li,Zhi Fang
The weather resistance capability of insulating materials, i.e. surface performance including hydrophobicity, mechanical and electrical strength under diverse weather conditions, is considered of critical importance for high-voltage devices working outdoors. In this study, atmospheric pressure plasma jet with Ar/Hexamethyldisiloxane (HMDSO) assisted by γ-Aminopropyltriethoxysilane (APTES) and oxygen (O 2 ) addition is employed to deposit a robust insulating film with good weather resistance capability on the surface of Polymethylmethacrylate (PMMA). The gas flow rates of Si-containing precursors (HMDSO/APTES) and auxiliary gas (O 2 ) are varied to elucidate the correlation between precursor ratio and film performances. The mechanism for robust film deposition is explored by investigating reactions of active particles deduced from discharge characteristics, surface physical morphology and chemical composition variations. The results indicate that APTES plays a pivotal role in the enhancement of the film mechanical strength, while O 2 can further improve both mechanical and electrical performances. A robust superhydrophobic film is deposited, inhibiting the reduction in water contact angle by 81.6 % after the tape peel test compared with the film deposited by Ar/HMDSO system, and the flashover voltage is increased by 38.2 % with the optimal HMDSO/APTES/O 2 ratio of 7:5:1. The simultaneous improvements of the film hydrophobic, mechanical and electrical performances are contributed by crosslinking of silicone deposits and the introduction of -NH₂ groups. The weather resistance capability of the insulating material is effectively enhanced, providing guidance for outdoor insulation applications.
研究领域:
材料科学
·
电气工程
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Yandong Sun,Weiguang Han,Fangyuan Zhang,Hui Li,Ziqi Zhang,Xue Zhang,Boxiong Shen,Sheng-Qi Guo,Tianyi Ma
The generation of singlet oxygen ( 1 O 2 ) based on photocatalytic activation O 2 is considered to have important application prospects in purifying refractory organic pollutants in water. However, the uncertain dual pathway transformation of activated O 2 severely limits the generation of 1 O 2 . In this work, we show a robust BiOCl with dual defects (adjacent I-substitution defect and Cl vacancy) in halogen layer for the selective activation of O 2 to generate 1 O 2 . Combining experiments and theoretical calculations, we confirm that dual defects are beneficial in optimizing band structures, improving carrier separation efficiency, and promoting O 2 adsorption and activation. More importantly, it is confirmed that dual defects can directionally convert O 2 into 1 O 2 by increasing the thermodynamic conversion energy barrier of non- 1 O 2 conversion pathways and serving as a necessary site for 1 O 2 generation with dual functions of oxidation and reduction. Applying dual defect modified BiOCl to the removal of refractory aromatic pollutants in water, it is found that it has efficient and stable photocatalytic degradation efficiency and broad environmental adaptability. This work not only provides in-depth insights into the mechanism of photocatalytic activation of O 2 to selective produce 1 O 2 , but also lays the foundation for further development of highly active photocatalysts for environmental remediation and energy conversion.
研究领域:
环境科学
·
材料科学
·
化学
✓ 已验证
DOI
高影响因子
FUEL
·
2024
·
IF 6.7
Xue Lu,Jingfang Li,Liye Liang,Guangming Li
Deep desulfurization with high-efficiency is imperia for environmental demands with increasing stringent standard of sulfur content in fuels. To develop high efficiency heterogeneous catalyst for aerobic oxidative desulfurization (AODS) of fuel, an Anderson-type CoMo 6 -2NH 2 (POM) as active site, which was considered to be very effective in catalyzing the activation of O 2 , was successfully anchored on the sub-stoichiometric ECOF as a carrier by Schiff-base condensation reaction between –NH 2 groups in CoMo 6 -2NH 2 and –CHO groups in ECOF. The anchoring of CoMo 6 -2NH 2 on ECOF by covalent bond resulted in the heterogenization of CoMo 6 -2NH 2 enabled CoMo 6 -2NH 2 @ECOF to be recyclable during the AODS process. When CoMo 6 -2NH 2 @ECOF was applied as catalyst for AODS of fuel with surfactant (OTAC) under O 2 , it exhibited excellent catalytic activity with almost 100 % removal rates under 95 °C for 6 h. Moreover, the catalyst can be recycled 7 times without significant loss of catalytic activity. Further, the structure-activity relationship was investigated and the reaction mechanism of AODS of fuel was verified by ESR, XPS analysis and selective quenching experiments.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF ANALYTICAL CHEMISTRY
·
2020
·
IF 0.936
Liang WANG,Zhang-Quan PENG
Development of lithium-oxygen (Li-O 2 ) batteries is hindered by large overpotentials, low energy efficiency and unsatisfactory cycling life, which are predominately caused by the oxygen evolution reaction (OER) involving sluggish oxidation of lithium peroxide (Li 2 O 2 ). Herein, a highly-efficient soluble redox mediator (RM) of N , N’ -Diphenyl- p -phenylenediamine (DPPD) is introduced to catalyze the oxygen evolution reaction for Li-O 2 batteries. During charging process, DPPD is electrochemically oxidized into DPPD + , which can chemically decompose Li 2 O 2 on the cathode with a much-reduced overpotential. The in-situ differential electrochemical mass spectrometry confirms that the charging process is dominated by Li 2 O 2 decomposition. With the assistance of DPPD, Li-O 2 cells can achieve lower charging potential, improved cycling stability, and prolonged lifespan (294 cycles) which is three times longer than that of tetrathiafulvalene counterpart. This work presents a credible and viable opportunity for long lifespan Li-O 2 batteries.
研究领域:
电化学
·
能源材料科学
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Xiao Liu,Peng Zhang,Liangliang Liu,Jianwen Feng,Xiaofeng He,Xiaosheng Song,Qing Han,Hua Wang,Zhangquan Peng,Yong Zhao
Aprotic lithium–oxygen (Li–O2) batteries with an ultrahigh theoretical energy density have great potential in rechargeable power supply, while their application still faces several challenges, especially poor cycle stability. To solve the problems, one of the effective strategies is to inhibit the generation of the LiO2 intermediate produced via a surface-mediated oxygen reduction reaction (ORR) pathway, which is an important species inducing byproduct generation and low cell cyclic stability. Herein, a series of quinones and solid materials serve as the solution-mediated and surface-mediated ORR catalysts, and it was found that the generation of LiO2 and byproducts from solid catalysts was inhibited by quinones. Among the studied quinones, benzo[1,2-b:4,5-b′]dithiophene-4,8-dione, a quinone molecule with the advantage of a highly symmetrical planar and conjugated structure and without α-H, exhibits high redox potential, diffusion coefficient, and electrochemical stability, and consequently the best ORR activities and the capability to inhibit byproduct generation. It indicated that the increase of the solution-mediated ORR pathway plays an important role in restraining the discharging side reaction, substantially improving cell cycle stability and capacity. This study provides the theoretical and experimental basis for better understanding the ORR process of Li–O2 batteries.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
SusMat
·
2021
·Vol. 1
·期 3
·448-457
·
IF 0
Zhaomin Chen,Xiaoqing Gu,Yutong Guo,Xin Wang,Mingwang Shao,Bin Dong,Zhenhui Kang
Electrochemical cell can overcome the inherent intermittence of the renewable energy sources, thus showing great potentials in applications ranging from electrical energy storage to future smart grid. However, the current electrochemical cells could not achieve the “total green” feature by fully utilizing the clean and abundant O 2 /H 2 O redox couples due to the enormous overpotentials for both oxygen reduction reaction (ORR) and oxygen release reaction (OER). Herein, we report a “total green” electrochemical composite film cell based on carbon dots (CDots), which can realize both ORR and OER in the acid environment. The in-air voltage generation (0.95 V, with a maximum power of 5.3 μW) relies on the multiple-electron-transfer redox chemical reaction between the two active components inside the composite film, that is, ORR/OER of CDots and the redox reaction of polyaniline (PANI) on the electrode and the resulting proton concentration gradient. Interestingly, the cell can be self-recovered at low load, recharged by adding H 2 O 2 , or electrocharged at high load. We anticipate that current study may open up new opportunities for designing and developing total-green energy storage and conversion systems for diverse applications.
研究领域:
材料科学
·
能源技术
·
环境科学
✓ 已验证
DOI
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Mengyan Duan,Long Cao,Ni Wang,Jianxin Liu,Lulu Zhang,Jiancheng Wang
Photocatalytic water splitting is hindered by flammable H 2 /O 2 cogeneration and energy-intensive post-separation. Herein, a Ru/WO 3 -MWCNTs ternary composite is designed to address these bottlenecks via a hydrogen spillover-based strategy: direct H* storage instead of gaseous H 2 generation to achieve H 2 /O 2 separation. Photogenerated H* from Ru active sites migrate through WO 3 , then is immobilized on MWCNTs as C H bonds for hydrogen storage, enabling exclusive O 2 release during photocatalysis. This composite exhibits an oxygen evolution rate (OER) of 645.28 μmol g −1 h −1 (outperforming binary counterparts) with no detectable gaseous H₂ during irradiation, alongside a stable H₂ storage capacity of 2.23 wt%. The stored hydrogen is thermally releasable, and the entire cycle of photocatalytic water splitting (hydrogen storage with O 2 evolution) and thermal H 2 release maintains excellent cyclic stability. This work establishes hydrogen storage-aided in-situ H 2 /O 2 separation as a universal strategy for addressing the core bottlenecks in photocatalytic water splitting.
✓ 已验证
DOI
高影响因子
Small
·
2023
·
IF 13.3
Yuxin Long,Qiang Li,Zidong Zhang,Qingxi Zeng,Dong Liu,Lanling Zhao,Yao Liu,Yebing Li,Yiming Zhang,Kunqian Ji,Zhaorui Zhou,Xue Han,Jun Wang
Li-O 2 batteries could deliver ultra-high theoretical energy density compared to current Li-ion batteries counterpart. The slow cathode reaction kinetics in Li-O 2 batteries, however, limits their electrocatalytic performance. To this end, MoSe 2 and Ni 0.85 Se nanoflakes were decorated in carbon hollow nanoflowers, which were served as the cathode catalysts for Li-O 2 batteries. The hexagonal Ni 0.85 Se and MoSe 2 show good structural compatibility with the same space group, resulting in a stable heterogeneous structure. The synergistic interaction of the unsaturated atoms and the built-in electric fields on the heterogeneous structure exposes abundant catalytically active sites, accelerating ion and charge transport and imparting superior electrochemical activity, including high specific capacities and stable cycling performance. More importantly, the lattice distances of the Ni 0.85 Se (101) plane and MoSe 2 (100) plane at the heterogeneous interfaces are highly matched to that of Li 2 O 2 (100) plane, facilitating epitaxial growth of Li 2 O 2 , as well as the formation and decomposition of discharge products during the cycles. This strategy of employing nonstoichiometric compounds to build heterojunctions and improve Li-O 2 battery performance is expected to be applied to other energy storage or conversion systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanoscale
·
2023
·
IF 6.7
Yingyi Zhang,Lin Zhang,Yuhan Zhang,Rong Ju,Guoqing Wei
Antimicrobial sonodynamic therapy (SDT) has broad application potential in the eradication of multidrug-resistant (MDR) bacterial infections due to its non-invasiveness, absence of resistance concern, and high cytotoxicity. However, the hypoxic infection microenvironment and the rapid depletion of O2 during SDT severely limit the therapeutic efficacy of SDT. Herein, an ultrasound-controllable ROS-responsive nanoplatform (FOT/Fe3O4@Lipo-ICG) was constructed and prepared by encapsulating FOT and Fe3O4 nanoparticles (Fe3O4 NPs) within sonosensitiser ICG-modified liposomes. Both in vitro and in vivo, we observed that the ICG conjugation on the surface of liposomes could effectively maintain a good dispersion and prevent ICG aggregates in complex biological matrices. In addition, the liposomes could significantly block the catalytic activity of the Fe3O4 NPs, as well as the release of FOT, whereas upon US irradiation, the catalytic activity of Fe3O4 NPs was recovered to catalyse the decomposition of endogenous H2O2 into O2 and •OH. Meanwhile, the FOT was successfully released to react with endogenous glutathione to sequentially produce NO. Based on the aforementioned advantages, the FOT/Fe3O4@Lipo-ICG demonstrated potent efficacy in eradicating methicillin-resistant Staphylococcus aureus-induced local infection and sepsis resulting from local infection. Thus, the developed US-controllable nanoplatform offers a promising strategy for enhancing SDT for eradicating MDR bacterial infections.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTRONIC MATERIALS
·
2023
·Vol. 52
·期 10
·6613-6624
·
IF 2.1
Gong Huixia,Wang Liqin,Wang Jianshe,Liu Qingchao
Lithium-oxygen (Li-O 2 ) batteries have become one of the most promising next-generation energy storage systems due to their high theoretical specific capacity. However, Li-O 2 batteries still face the problem of high charging voltage due to incomplete decomposition of discharge products. Here, a nitrogen-doped hollow spherical carbon composite containing Ni/Co nanoparticles was prepared by hydrothermal and pyrolysis strategies, and used as positive catalyst for Li-O 2 batteries to adjust the morphology of the discharge product. The porous hollow carbon sphere provides sufficient space for the storage of discharge products. Nitrogen-doped carbon nanospheres can change the local charge density, improve the electron transfer performance, and reduce the resistivity of carbon nanospheres. In addition, the abundant M-N x active groups enhance the affinity of the positive electrode to the reaction intermediates, thus regulating the morphology of the discharge product Li 2 O 2 . Benefiting from the above synergistic advantages, the electrochemical performance of the Li-O 2 battery including round-trip efficiency, discharge capacity, and cycling stability is greatly improved. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
ACTA MATERIALIA
·
2023
·
IF 9.4
Ruineng Ruan,Haibo Xiao,Wenjing Dong,Zhanghong Yu,Xunying Wang,Baoyuan Wang,Chen Xia,Hao Wang
Fast ionic transportation is in high demand for developing low-temperature solid oxide fuel cells (LT-SOFCs). Facing this challenge, a new H + /O 2− /Li + triple conductor is designed in this study from a lithium-metal oxide, spinel Li 4 Ti 5 O 12 (LTO). First-principle calculation based on density functional theory (DFT) reveals the proton transport barrier in LTO can be as low as 0.37 eV while the barrier for oxygen ion transportation is 0.94 eV. Using the designed LTO as the electrolyte and a typical cathode of lithium-ion battery, LiNi 0.8 Co 0.15 Al 0.05 O 2-δ , as the symmetrical electrodes, an all-lithium-metal-oxides-based LT-SOFC is constructed. High performance is achieved by the SOFC at 550–425 °C, i.e. 625 mW cm −2 at 550 °C, and a low activation energy of 0.60 eV is found with respect to the ionic conductivity of LTO at 550–475 °C. Further study confirms the dual O 2− /H + conduction of LTO via the application of proton and oxygen ion filters as well as the transference number test. Additionally, particular attentions are paid to the transport behavior of Li + in the cell via a charging process study and from XRD results. The possible contribution of triple conduction on fuel cell performance is discussed. This work demonstrates the great promise of triple H + /O 2− /Li + conducting lithium-metal oxides for LT-SOFC electrolyte development.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）