SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Yang Wang,Meili Ding,Jiani Chen,Jianfeng Yao
Biomimetic ZIF-L/MXene were prepared by a facile two-step synthetic route. • Microflower structure favors light harvesting and active site exposure. • MXene can expand the photoresponse into the near-infrared region. • ZIF-L/MX-0.8 achieves efficient photodriven CO2 fixation under ambient conditions. • The photothermal/photocatalytic synergistic mechanism was explored. Solar-driven carbon dioxide (CO 2 ) transformation into valuable carbon-based products is of high significance for simulating natural carbon cycling. However, the ongoing challenge lies in the design of photocatalysts for achieving efficient CO 2 conversion. In this study, inspired by natural wisdom, ZIF-dia/MXene microflowers are successfully constructed through [Zn(NH 3 ) 4 ] 2+ -induced self-assembly of Ti 3 C 2 T x MXene (T x = –F, –OH, =O) sheets followed by the in-situ growth of ZIF-DIA. Remarkably, the optimized ZIF-dia/MX-0.8 serving as a solar-triggered photothermal and photocatalytic bifunctional platform was found to catalyze the coupling of CO 2 and epichlorohydrin, with a cyclic carbonate yield of 98% under full spectrum illumination for 6 h, significantly surpassing the single components. Specifically, the hierarchical flower-like superstructure consisting of ZIF-dia and MXene sheets can favor light absorbance via multiple reflection and facilitate the exposure of active sites and mass transfer. In addition, this ZIF-dia/MXene composite can absorb the light covering the entire visible region owing to the presence of MXene, thereby enhancing the photothermal conversion. Furthermore, experimental results reveal that the CO 2 cycloaddition with epoxide over ZIF-dia/MX-0.8 is proved to be the synergy of photothermal catalysis and photocatalysis. This work enriches the design of MOF-containing photocatalysts, opening a unique and sustainable way to solve global environmental issues. Download: Download high-res image (165KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Zeyuan Gao,Yongchao Sun,Lu Bai,Tianyou Li,Jianyu Guan,Fake Sun,Fangxu Fan,Gaohong He,Canghai Ma
Ring-opened TB-OR is blended with PIM-1 to form a hydrogen-bonded membrane. • The TB-OR-PIM treated at 350 °C for 10 h achieve CO 2 /CH 4 selectivity of 330.0. • The optimized membranes exhibit 17.4- and 34.4-fold selectivity improvements. • The membranes show excellent resistance to CO 2 plasticization at 600 psi. Polymers of intrinsic microporosity (PIM) membranes have shown great potential for hydrogen purification and carbon dioxide separation, but often suffer from low gas selectivity. Here, a hydrogen-bonded-assisted, thermally crosslinked membrane is prepared by incorporating ring-opened TB-OR with PIM-1. Hydrogen-bonding interactions between the amine groups of TB-OR and the nitrile groups of PIM-1 promote interchain association and preorganization before thermal treatment. Subsequent thermal treatment induces chain rearrangement, structural densification, and partial covalent crosslinking, while hydrogen-bonding interactions are re-established upon cooling, leading to a more size-selective microporous structure. The membrane treated at 350 °C for 10 h exhibits CO 2 /CH 4 and H 2 /CH 4 selectivities of 330.0 and 708.3, representing 17.4- and 34.4-fold improvements over the uncrosslinked membrane, surpassing the 2019 upper bound for CO 2 /CH 4 and approaching the 2015 upper bound for H 2 /CH 4 separation. Both pure- and mixed-gas tests at 600 psi confirm excellent resistance to CO 2 plasticization, while aging measurements further demonstrate improved performance stability. These results highlight the effectiveness of hydrogen-bond-assisted thermal crosslinking in regulating chain packing and microporous structure in PIM-based membranes for hydrogen purification and high-pressure CO 2 separation. A thermally crosslinked membrane platform was developed by integrating ring-opened TB-OR with PIM-1 to simultaneously enhance gas separation selectivity and operational stability. Download: Download high-res image (388KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Weiqi Lu,Zhenyang Dai,Ruichao Xu,Yufeng Chen,Min Ge,Wenxue He,Jinglin Yuan,Yanna Shui,Ya Pan,Yong Zhang,Chao Wang,Yajuan Feng,Shi He,Zhihu Sun
Conventional Ni–N 4 single-atom catalysts (SACs) hold great promise in sustainable energy conversion and storage, but suffer from weak * COOH adsorption and narrow potential windows during CO 2 electroreduction (CO 2 RR). To address this limitation, herein we report an asymmetric Ni–N 3 O 1 SAC prepared via an oxygen-mediated spatial confinement pyrolysis strategy. Theoretical calculations predict that this unique asymmetric coordination can effectively lower the * COOH formation energy, promote the interaction between the catalyst and * COOH, and suppress the competing hydrogen evolution reaction in CO 2 RR. The prepared Ni–N 3 O 1 SAC features a distorted planar quadrilateral structure and demonstrates exceptional performance in CO 2 -to-CO conversion, with a maximum turnover frequency of 207 700 h −1 , a maximum CO partial current density of 810 mA cm −2 , and CO Faradaic efficiency of ≥ 99% over an ultra-wide potential window of 2100 mV (−0.3 to −2.4 V vs. reversible hydrogen electrode) in a flow cell. A combination of in situ spectroscopic measurements verifies the reversible structural evolution and robust stability of the Ni–N 3 O 1 SAC under CO 2 RR conditions, as well as the strengthened * COOH formation and accelerated CO 2 activation kinetics. This work provides a feasible route for designing and synthesizing high-performance asymmetrically coordinated SACs toward industrial CO 2 -to-CO conversion.
✓ 已验证
产品关联
DOI
高影响因子
BIORESOURCE TECHNOLOGY
·
2026
·
IF 8.2
Fangqing Wei,Xiao Han,Ping Xu,Fei Tao
Metabolic rewiring of K. phaffii enables glycolic acid production from methanol. • Cofactor-neutral design relieves redox constraints in methanol assimilation • Glycolic acid titer reaches 41.2 g/L using methanol as the sole carbon source. • A record yield of 0.41 g/g is achieved in methanol-only bioconversion. Chemo-biological valorization of CO 2 into value-added chemicals, such as the biodegradable plastic monomer glycolic acid (GA), represents a promising frontier in sustainable manufacturing. However, the realization of this synergistic loop is hindered by the low carbon efficiency of C 1 bioconversion. Herein, we address this challenge by engineering an efficient methanol bioconversion platform that selectively upgrades CO 2 -derived methanol into GA. To address metabolic redox constraints inherent to methanol assimilation that severely limit carbon yield, we reprogrammed Komagataella phaffii by constructing a cofactor-neutral biosynthetic route that couples NADPH generation directly to GA formation. Combined with the elimination of competing carbon sinks, this design eradicates the redox constraints that typically limit C 1 assimilation. As a result, carbon flux toward GA surged by 4.6-fold while maintaining cellular fitness. Translating this rewired module to a 5-L bioreactor establishes a benchmark, achieving a titer of 41.2 g/L and the highest reported yield of 0.41 g/g for methanol-only bioconversion. Life-cycle assessment (LCA) reveals a 59.0% lower global warming potential (GWP) relative to fossil-based routes. This study establishes a high-efficiency methanol bioconversion platform for GA production, completing the CO 2 -to-GA loop and providing a sustainable route for the utilization of CO 2 -derived carbon resources. Download: Download high-res image (102KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yali Zhao,Mengxin Duan,Ying Zhang,Sibo Huang,Qingxin Guan,Wei Li
A pH-tunable metal–phenolic precursor enables uniform core–shell Fe 3 O 4 -FeC x @C. • P123 serves as structure-directing agent and defect inducer to create carbon vacancies. • Active H* may be adsorbed on carbon-defect sites, which suppresses undesirable over‑hydrogenation. • Fe 3 O 4 , Fe 2 C, and Fe 5 C 2 synergistically drive RWGS and C-C coupling to light olefins. • Catalyst achieves 54.95% CO 2 conversion, 45.48% light olefins selectivity, and 100 h stability. The conversion of CO 2 to light olefins via the reverse water-gas shift and Fischer-Tropsch synthesis (RWGS-FTS) tandem pathway offers a sustainable route to value-added chemicals, yet precise control over the catalyst microstructure remains challenging. Here, we report a defect-engineered core-shell catalyst, Fe 3 O 4 -FeC x @C, synthesized from pH-tunable metal-phenolic networks (MPNs) precursor and a P123 soft template. The MPNs ensure uniform dispersion of iron species, while P123 generates abundant carbon defects in the graphitic shell. The resulting Fe 3 O 4 -FeC x @C-P-p2 catalyst features a unique architecture where the core activates H 2 and CO 2 , and the defective shell may promote the adsorption of active hydrogen species, which could spatially decouple active H* from C C coupling. Combined with previous reports, Fe 3 O 4 and FeC x may work synergistically: Fe 3 O 4 could acts as active sites for the RWGS reaction, while FeC x facilitates C C coupling, offering an efficient strategy to boost light olefin selectivity in CO 2 hydrogenation. The carbon shell provides spatial confinement to prevent sintering, while defect sites may promote the adsorption of H*. Under optimized conditions, the catalyst achieves 54.95% CO 2 conversion and 45.48% light olefin selectivity, with no significant deactivation over 100 h. This work demonstrates a synergistic strategy combining defect engineering, hydrogen spillover, and phase cooperation for efficient CO 2 hydrogenation. A defect-rich graphitic carbon shell encapsulates an Fe 3 O 4 -FeC x core to form a core-shell catalyst via a metal-phenolic network (MPN) self-assembly strategy. The defective carbon layers may adsorb spillover active H*, tuning intermediate hydrogenation for higher olefin selectivity. This architecture achieves 54.95% CO 2 conversion and 45.48% light olefins selectivity, with outstanding stability over 100 h, providing a robust platform for efficient CO 2 -to-olefins conversion. Download: Download high-res image (181KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·Vol. 65
·期 35
·18572-18586
·
IF 3.9
Dai Yasen,Zhu Congfei,Wang Bingru,Gao Minjie,Ren Shuhang,Hou Yucui,Wu Weize
To
overcome the high energy consumption associated with
conventional
CO 2 capture and conversion processes, this study develops
an integrated strategy combining CO 2 capture and in situ hydrogenation to methanol using
a novel basic deep eutectic solvent (DES). The DES, composed of N,N,N ′ ,N ′ -tetraethylethylenediamine
(TEEDA) as a hydrogen bond acceptor and ethylene glycol (EG) as a
hydrogen bond donor (optimal molar ratio 1:20), serves as both a capture
medium and a reaction promoter. When coupled with a commercial Cu/ZnO/Al 2 O 3 catalyst, the system achieved efficient CO 2 capture (1.14 mmol·g –1 ) and direct in situ conversion. Under optimized conditions
(240 ° C, 8 MPa H 2 , 12 h), a methanol selectivity of
92.9% with a yield of 72.5% was attained; even at 180 ° C, a selectivity
of 96.0% with a yield of 57.5% was obtained. Control experiments confirmed
that the polar EG solvent enhances CO 2 conversion through
solvation effects, while the DES itself possesses no intrinsic catalytic
activity. Mechanistic studies indicate that CO 2 is captured
via the formation of alkyl carbonate ions, and subsequent hydrogenation
proceeds through a formate pathway. Density functional theory (DFT)
calculations further demonstrate that the polar DES environment reduces
the activation energy barrier for the rate-limiting H 2 heterolysis
step. The DES showed good recyclability over four cycles, and catalyst
deactivation was primarily attributed to sintering-induced loss of
Cu surface area. This work presents a viable DES-based integrated
process for CO 2 capture and valorization, highlighting
the solvent’s dual function and providing insights into the
design of efficient integrated capture–conversion systems.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2026
·Vol. 9
·期 31
·14718-14729
·
IF 5.8
Wang Yizhou,Cao Jianxin,Yao Mengqin,Li Ziwei,Li Zhuxuan,Liu Fei
The
current reaction mechanism of cerium dioxide (CeO 2 ) catalyzing
the direct synthesis of dimethyl carbonate (DMC) from
carbon dioxide (CO 2 ) and methanol remains unclear. In this
study, we prepared hollow nanospheres of CeO 2 with different
shell thicknesses (CeO 2 –S– x h) by controlling the Ostwald ripening time to investigate the role
of surface hydroxyl groups in the catalytic process. Among these,
the DMC formation rate of CeO 2 –S–24 h was
20.6 mmol g cat –1 h –1 , which is
1.5 times that of CeO 2 –S–4 h. Combining X-ray
photoelectron spectroscopy (XPS) etching and in situ Fourier-transform
infrared spectroscopy (FTIR) analysis, we found that an appropriate
shell thickness can effectively suppress the inhibition of hydroxyl
group conversion caused by oxygen vacancy (Vo) migration, thereby
promoting the transformation of monomethyl carbonate (MMC) to methoxycarbonyl
(MC) and enhancing the DMC formation rate. This study provides insights
into the structural design of CeO 2 -based catalytic materials
and reveals the critical role of surface hydroxyl groups in the synthesis
of DMC.
✓ 已验证
DOI
高影响因子
Nanoscale
·
2026
·
IF 5.2
Shuai Wang,Liu Chang,Yue Qin,Zepu Chen,Qingfa Wang
The conversion of CO 2 into high-value chemicals using renewable electricity holds great application prospects. However, improving the selectivity toward C 2 products remains a challenge. Here, we report a Sn atomically dispersed in Cu2O matrix (Sn-Cu2O), synthesized via a facile one-pot method. The as-prepared catalyst Sn-Cu2O-0.025 displays a Faradaic efficiency of 73.2% for C2 products with ethanol accounting for 32.1% at the current density of 200 mA cm-2 . Based on in-situ FT-IR characterization, the introduction of Sn promotes the activation of CO2 to *CO and enhances the coverage of *CO. As a result, the C-C coupling accelerates the formation process of key intermediates *OCCOH and enhances the selectivity of the C2 products. This study provides insights
✓ 已验证
DOI
PubMed
高影响因子
Separations
·
2026
·Vol. 13
·期 5
·148
·
IF 3.5
Siyu Wang,Junyang Du,Junsu Jin,Jianguo Mi
Metal–organic frameworks (MOFs) show great potential for post-combustion carbon capture, yet their practical application is often constrained by challenges such as powder handling difficulties, limited structural stability during shaping processes, and performance degradation under high-humidity conditions. In this study, Mg-gallate was structured into millimeter-sized Mg-gallate/CA composite beads via the ionotropic gelation method, and then a hydrophobic layer of vinyltrimethoxysilane (VTMS) was constructed on the bead surface by chemical vapor deposition. The synthesized Mg-gallate/CA and V-Mg-gallate/CA are characterized by XRD, FT-IR, and other techniques, and their CO2adsorption behavior, adsorption–desorption kinetics, breakthrough performance, and cyclic stability are systematically evaluated. At 298 K and 0.1 bar, the CO2adsorption capacity of Mg-gallate/CA reached 94.2% of that of Mg-gallate powder. The microporous–microporous hierarchical structure constructed by the ionotropic gelation method improved the CO2capture efficiency of the composite beads by 16.7% at 0.1 bar. V-Mg-gallate/CA maintained a high dynamic CO2adsorption capacity of 2.87 mmol/g for a 10 vol.% CO2/90 vol.% N2gas mixture at 298 K under 80% RH, corresponding to 2.04 times the capacity of Mg-gallate/CA, and retained 98.8% of its initial adsorption capacity at 0.1 bar after 10 cycles. Combining ionotropic gelation shaping with surface hydrophobic modification represents an effective strategy for developing MOF-based adsorbents suitable for post-combustion CO2capture.
✓ 已验证
DOI
高影响因子
AICHE JOURNAL
·
2026
·
IF 4.4
Yaxing Zhang,Liju Bai,Xiaotong Jiang,Yimin Deng,Helei Liu
Mass transfer performance is an important design criterion for the absorption of CO 2 by amines in packed columns. In this paper, the effects of diethylenetriamine (DETA)–1-dimethylamino-2-propanol (1DMA2P)–H 2 O biphasic solvent on the total mass transfer coefficient ( K G a v ) of different operating parameters (liquid flow rate, gas flow rate, liquid temperature, CO 2 partial pressure, and CO 2 loading) were investigated in a mesh-structured (DX) packed column. The mass transfer mechanism of this biphasic solvent to capture CO 2 was assessed by determining the control step of mass transfer. In addition, the experimental data were compared with two empirical models, the Sheng model and the modification, and the results showed that the modification could better fit the experimental results. Further analysis was conducted on the differences in packed column design among several different amine systems and the DETA–1DMA2P–H 2 O system. The findings revealed that the DETA–1DMA2P–H 2 O system required the least column volume, highlighting its strong potential for industrial application.
✓ 已验证
DOI
高影响因子
Carbon Energy
·
2026
·
IF 21.4
Lizhen Lu,Xinghua Zhu,Yuan Liang,Jinghui Wang,Haoyu Zhang,Jinbo Xue,Qianqian Shen,Jian Ku Shang,Qi Li
To search for efficient carbon dioxide reduction photocatalysts, rare-earth element doping has attracted considerable attention owing to their unique electronic structures and energy levels, which significantly enhance light absorption and charge-transfer efficiency. In this work, Er-doped two-dimensional ultrathin BiOCl nanosheets are synthesized via a surfactant-assisted hydrothermal method. Er-doping not only suppresses the photogenerated charge carrier recombination but also further enhances the photocatalytic memory effect of BiOCl nanosheets. The synergistic effect of Er doping and the photocatalytic memory effect induced by prior visible-light irradiation largely modulates the internal electronic state of BiOCl nanosheets. Experimental and density functional theory analysis results demonstrate that desirable changes subsequently occur in Er-doped BiOCl nanosheets, compared with pure BiOCl nanosheets, including the generation of abundant oxygen vacancies, improvement of visible light absorption, higher photogenerated electron reduction potential, stronger piezoelectric response, better charge carrier separation and transfer, enhanced CO 2 adsorption, and lower CO 2 activation energy. Bi 0.98 E 0.02 OCl nanosheets (2 mol% Er) exhibit superior CO 2 -to-CO reduction performance in photocatalysis, piezocatalysis, and photopiezocatalysis without co-catalysts, photosensitizers, or sacrificial agents. With nearly 100% selectivity, the photopiezocatalytic CO 2 -to-CO rate reaches ~3921.2 μmol g −1 h −1 under visible light and ultrasonication, far exceeding previous reports.
✓ 已验证
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Dong Cao,Yuhao Tian,Xueke Wang,Cuimei Li,Weijie Cai,Congming Li,Chun-Ran Chang
Photothermal CO 2 conversion into value-added syngas via dry reforming is pivotal for greenhouse gas utilization, yet its efficiency is constrained by catalyst deactivation. Here, we demonstrate that morphology-induced crystal phase modulation of ZrO 2 supports enables effective optimization of interfacial sites in Ni/ZrO 2 catalysts. By engineering cubic (Ni/ZrO 2 -C) and stellated (Ni/ZrO 2 -S) architectures, a metastable mixed-phase structure (54.8% monoclinic/37.3% tetragonal) is stabilized to achieve precise phase regulation. Systematic characterization reveals that this phase transformation strengthens metal–support interactions, improves Ni dispersion, and generates abundant oxygen vacancies. As a result, Ni/ZrO 2 -C achieves 95% ethanol conversion with lower by-product formation and exhibits exceptional stability, with a 50% lower deactivation rate (0.13% h −1 ) than Ni/ZrO 2 -S (0.26% h −1 ). The enhanced performance is attributed to improved surface basicity and more efficient coke gasification facilitated by interfacial oxygen vacancies. Theoretical calculations further confirm kinetically favorable pathways with reduced activation barriers, particularly for carbon oxidation, accounting for the observed 3.2-fold higher activity of Ni/ZrO 2 -C. This work establishes morphology-directed crystal phase engineering as a general strategy for designing efficient photothermal catalysts.
✓ 已验证
产品关联
DOI
高影响因子