Journal of Physical Chemistry C
·
2026
·
IF 3.4
Jingyi Zhang,Jiaming Wu,Yuren Zhao,Keyan Li,Xinwen Guo
Photocatalytic conversion of CO2 and H2O into syngas offers a green and sustainable pathway for the production of chemical feedstocks. However, most high-yield syngas production systems rely on a noble metal photosensitizer or cocatalyst, making it challenging to obtain cost-effective syngas. In this work, we designed and prepared S-scheme TiO2/CN heterojunctions with varying mass ratios by calcining the mixture of NH2-MIL-125(Ti) and pristine carbon nitride (CN). The combination of TiO2 with CN significantly enhances visible light absorption, and the formation of an S-scheme heterojunction effectively improves the separation and migration of photogenerated carriers. In addition, the enlarged specific surface area as well as the enhanced CO2 adsorption capacity also promote the photocatalytic CO2 reduction. Without any noble metal photosensitizer or cocatalyst, the 150TiO2/CN heterojunction demonstrated excellent performance to produce syngas. The production rates of CO and H2 are 6.2 and 1.9 mmol g–1 h–1, respectively, and the syngas production rate was 3.4 and 29.5 times that of pure CN and TiO2, respectively, when high-purity CO2 is used as the feed gas and the ratio of H2O/MeCN in solvent is 1:4. By adjustment of the composition of feed gas and solvent, high yield syngas with widely tunable CO/H2 ratios from 3.3:1 to 1:3.7 was achieved, and the maximum syngas production rate reached 12.1 mmol g–1 h–1. This work provides insights into the design of highly efficient photocatalysts for CO2 conversion to fuels or chemicals.
✓ 已验证
DOI
高影响因子
LANGMUIR
·
2026
·
IF 4.4
Yuchen Li,Chenguang Li,Xue Wang,Mingjun Zhou,Lei Wang,Cheng Fang,Gongde Wu,Jing Ding,Hui Wan,Guofeng Guan
CO2 hydrogenation to ethanol is a promising pathway for carbon utilization, yet it remains challenged by the deactivation of iron-based catalysts due to water byproducts and the difficulty in controlling product selectivity. To address these issues, this work constructed hydrophobic MWCNT-supported K–FeCu bimetallic catalysts and systematically investigated their structure–activity relationships. The optimized catalyst (Fe/Cu = 0.5) exhibited superior performance at 320 °C and 4 MPa, achieving a CO2 conversion of 41.1%, with ethanol selectivity and space-time yield (STY) reaching 28.91% and 175.91 mg·gcat–1·h–1, respectively. Mechanistic studies revealed that the intrinsic hydrophobicity of MWCNT facilitated water desorption to preserve the active Fe5C2 phase. Synergistically, Cu promoted Fe reduction via hydrogen spillover, while K inhibited excessive hydrogenation, facilitating the C–C coupling of RWGS-derived CHxO* and CHx* intermediates at the interface. This study highlighted the importance of hydrophobic surface engineering, providing a strategy for designing catalysts for CO2 hydrogenation to ethanol.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2026
·
IF 4.6
Weijie Zhou,Yuzi Zhang,Chaoyue Li,Xiangyang He,Zhichao Miao,Jinglin Mu,Manfen Liang,Jin Zhou
In 2 O 3 supported on ZrO 2 and CeO 2 was developed for CO 2 -to-formate electroreduction. • Distinct support effects of ZrO 2 and CeO 2 on In 2 O 3 active site were identified. • CeO 2 tunes electronic structure of In species and boosts the catalytic performance. • In 2 O 3 /CeO 2 delivers higher current density and Faradaic efficiency than In 2 O 3 /ZrO 2 . • The In 2 O 3 /CeO 2 catalyst maintains stable operation for 50 h at 100 mA cm −2 . Developing efficient electrocatalysts for the selective CO 2 electroreduction to formate is important for achieving carbon neutrality. Herein, In 2 O 3 /ZrO 2 and In 2 O 3 /CeO 2 catalysts were fabricated by combining MOF-derived oxide supports with incipient wetness impregnation and subsequent thermal treatment. Comparative studies reveal that CeO 2 affords a more favorable catalyst-support interface than the ZrO 2 support, resulting in enhanced activity and selectivity for formate production. In a flow cell, the optimized In 2 O 3 /CeO 2 catalyst achieves a formate Faradaic efficiency of 90.0% at −1.37 V vs. RHE with a current density of 177 mA cm −2 , significantly outperforming the In 2 O 3 /ZrO 2 catalyst. Combined structural characterization and kinetic analysis indicate that the CeO 2 support improves the electronic structure of In species, thereby facilitating the adsorption and conversion of key intermediates and thereby improving the intrinsic reactivity for formate formation. Moreover, the In 2 O 3 /CeO 2 catalyst maintains stable operation for 50 h at 100 mA cm −2 . This work highlights the critical role of support effects in regulating In-based active sites and provides insights into the rational design of efficient catalysts for the selective CO 2 -to-formate electroreduction. A series of In 2 O 3 /ZrO 2 and In 2 O 3 /CeO 2 catalysts were prepared for ECR to formate. The CeO 2 affords a more favorable catalyst-support interface than the ZrO 2 support, resulting in enhanced activity and selectivity for formate production. Download: Download high-res image (117KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jingjing Wu,Dazhi Shen,Tingjie Mao,Jiacheng Liu,Juan Wang,Xujin Zhang,Juan Ding,Yudai Huang,Xiaoqing Huang,Yunhua Li
Tuning Sn dispersion switches CO 2 RR path, challenging site-activity dogma • Low Sn dispersion density highly stabilizes *OCHO, strongly favoring it over *COOH • 89.3% formate FE at 200 mA cm −2 under flow-cell conditions surpasses prior reports • Catalyst reconstruction and reaction species are analyzed by in situ experiments Electrocatalytic CO 2 reduction to CO and formate holds significant industrial promise. Herein, we reveal that the surface density of atomically dispersed Sn on Cu lattice modulates the active-site identity from Cu to Cu Sn, thereby switching product distributions. L-Sn 1 -Cu, featuring sparse Sn coverage, achieves a CO Faradaic efficiency (FE) of 72.8% at a current density of 300 mA cm −2 . Conversely, H-Sn 1 -Cu with saturated Sn isolation attains a formate FE of 89.3% at a current density of 200 mA cm −2 . Operando spectroscopy and DFT calculations show that Sn-deficient locales expose Cu atoms to bind *COOH and favor CO formation, while Sn-congested domains create polarized Cu Sn pairs that lock *OCHO for formate synthesis. This density-dependent ensemble tuning enables switchable selectivity between CO and formate in CO 2 electroreduction at industrially relevant current densities. By precisely tuning the lattice dispersion density of single-atom Sn on Cu, this work achieves a programmable selectivity inversion from *COOH-mediated CO production on sparse Sn sites to *OCHO-stabilized formate synthesis via polarized Cu Sn ensembles at industrially relevant current densities. Download: Download high-res image (54KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jiabao Lv,Hongman Sun,Guanying Liu,Fangzhen Wang,Xinru Qin,Shuzhuang Sun,Youhe Wang,Zifeng Yan
Mix-ZrO 2 supports have tunable monoclinic and tetragonal crystalline phases. • InPd/Mix-ZrO 2 –400 achieves 11.5% CO 2 conversion and 52% methanol selectivity. • The specific composition improves H 2 dissociation and CO 2 adsorption. • Methanol synthesis over InPd/Mix-ZrO 2 proceeds via the formate pathway. Upgrading CO 2 to methanol represents a pivotal strategy for achieving carbon neutrality, yet the development of highly efficient indium-based catalysts remains constrained by the urgent need for precise modulation of the support structure. Herein, we rationally design an In Pd catalyst supported on mixed crystal phase ZrO 2 (Mix-ZrO 2 ) with tunable monoclinic and tetragonal fractions. The optimized InPd/Mix-ZrO 2 –400 catalyst exhibits a CO 2 conversion of 11.5% and methanol selectivity of 52% at 270 °C, significantly outperforming other comparative catalysts, and retains stability over 50 h. Crucially, the enhanced performance is intrinsically attributed to the synergistic effect derived from the specific monoclinic-tetragonal phase ratio, which significantly boosts the dissociation of H 2 and CO 2 adsorption capacity. In-situ DRIFTS analysis confirms the reaction proceeds via the formate (HCOO*) pathway, where the optimized support facilitates the rapid hydrogenation of intermediates. This work elucidates the synergistic effect of crystal phase engineering in oxide supports, offering a robust pathway for designing advanced CO 2 hydrogenation catalysts.
✓ 已验证
DOI
高影响因子
RARE METALS
·
2026
·Vol. 45
·期 4
·e70203
·
IF 12.1
Haifeng Tian,Haowei Huang,Zhiyu Chen,Fei Zha,Hongshan Chen,Ruiying Ding,Yu Zhang,Hao Wei,Yuzhong Mao,Irshad Hussain,Zhicheng Zhang
en Thermally driven hydrogenation of CO 2 to light olefins (C 2 = –C 4 = ) using metal oxide-zeolite tandem catalysts is an effective strategy for achieving carbon neutrality. However, progress in this area is constrained by zeolite pore transport limitations, acid-site inactivation, and surface carbon poisoning. To address these issues, we replaced conventional zeolites with La-modified ZIF-8 and combined it with hollow cubic In 2 O 3 to develop a novel In 2 O 3 -La-ZIF-8 tandem catalyst. Our study investigates the effects of the hydrothermal reaction temperature used for synthesizing In 2 O 3 and the La content in ZIF-8 on catalytic performance. We also found that the oxygen vacancy (O V ) concentration in In 2 O 3 can be substantially regulated by adjusting the hydrothermal temperature. The In 2 O 3 sample with the highest O V concentration not only promotes the formation of reaction intermediates but also markedly reduces the energy barrier of the rate-determining step in methanol synthesis. Comprehensive characterization and simulation analyses indicate that La incorporation enhances the thermal stability of ZIF-8, improves its ability to adsorb and activate reaction intermediates, and effectively adjusts its acid-base properties. Under a reaction pressure of 3.0 MPa and a temperature of 360°C, the hollow cubic In 2 O 3 -La-ZIF-8 tandem catalyst achieves 23.5% CO 2 conversion with 65.3% C 2 = –C 4 = selectivity. 摘要 zh 利用金属氧化物-分子筛串联催化剂 , 通过热驱动将CO 2 转化为低碳烯烃(C 2 = –C 4 = ) , 是实现碳中和的有效策略。然而 , 该领域的发展受到分子筛孔道传质限制、酸性位点失活及表面积碳等问题的制约。为解决这些难题 , 本研究以La修饰的ZIF-8替代传统分子筛 , 并将其与空心立方体In 2 O 3 相结合 , 开发了一种新型的In 2 O 3 -La-ZIF-8串联催化剂。系统探究了In 2 O 3 水热合成温度以及ZIF-8中La含量对催化剂性能的影响。通过调节水热温度可显著调控In 2 O 3 中的氧空位浓度 , 具有最高氧空位浓度的In 2 O 3 样品不仅能促进反应中间体的生成 , 还可显著降低甲醇合成过程中决速步骤的能垒。综合表征与模拟分析表明 , La的引入增强了ZIF-8的热稳定性 , 提升了其对反应中间体的吸附与活化能力 , 并有效调节了其酸碱性质。在3.0 MPa、360°C的反应条件下 , 空心立方In 2 O 3 -La-ZIF-8串联催化剂上实现了23.5%的CO 2 转化率与65.3%的低碳烯烃选择性。
✓ 已验证
DOI
高影响因子
AICHE JOURNAL
·
2026
·
IF 4.4
Zixuan Xu,Qing Zhao,Huiqin Xu,Hang Li,Jincheng Yu,Yuxiao Xu,Youting Wu,Xiaomin Zhang
Here, we propose the hydrophobic porous ionic liquids (PILs) for CO 2 capture and conversion from humid flue gas. Specifically, silver was introduced onto the surface of ZIF-90 and the resultant material was incorporated into the hydrophobic ionic liquids (ILs) to form Type III PILs. The obtained LADDA-PIL exhibited an exceptional CO 2 absorption capacity and CO 2 /N 2 (15/85) selectivity of 2021, surpassing nearly all previously reported porous liquids. Dynamic breakthrough experiments confirmed that LADDA-PIL successfully captured CO 2 from humid flue gas. Moreover, the π-interaction between silver in LADDA-PIL and the alkynyl group enabled high-yield carboxylative cyclization of CO 2 with propargylic alcohols at ambient temperature. Density functional theory calculations and molecular dynamics simulations revealed that the hydrophobic ILs act as an effective H 2 O barrier, while the NH 2 moiety of the ILs facilitates CO 2 transport and conversion. This study offers a promising strategy for energy-efficient carbon capture under humid conditions.
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Fangfang Li,Jinjin Wang,Ying-Hua Zhou
Metal-organic frameworks (MOFs) possess highly tunable structures, making them promising heterogeneous catalysts for efficient CO 2 conversion reactions. In this work, cerium-modified zirconium-based metal-organic frameworks (ZrCe-UiO-66) were engineered and post-synthetically functionalized with dicationic ionic liquid moieties, enabling the simultaneous introduction of strong Lewis acidic sites and nucleophilic ionic liquid units without the need for external co-catalysts. The resulting ZrCe 0.5 -UiO-66-DIL(n-PyRIm) ( n = 2, 3, 4; R = Et, Pr, Bu, Pe) functionalized MOFs were prepared via a modular grafting approach and exhibited remarkable catalytic performance. Among them, ZrCe 0.5 -UiO-66-DIL(2-PyBuIm) converted epichlorohydrin into the corresponding cyclic carbonate with 96% yield and 98% selectivity under solvent-free conditions at 110 °C and a CO 2 pressure of 0.1 MPa. This outstanding activity arises from a cooperative activation mechanism, in which the mixed Zr 4+ /Ce 4+ activate the epoxide substrate through Lewis acid coordination with the epoxide oxygen, thereby facilitating C O bond activation, while the bromide anions embedded in the ionic liquid moieties promote nucleophilic ring opening. In addition to high catalytic efficiency, the MOF hybrids demonstrated excellent recyclability and broad substrate tolerance. Combined CO 2 adsorption measurements and in situ infrared spectroscopy further revealed key surface intermediates, enabling a plausible mechanistic pathway for the cycloaddition process to be proposed.
✓ 已验证
DOI
高影响因子
AICHE JOURNAL
·
2026
·
IF 4.4
Yuqi Zhang,Daofan Ma,Taotao Fu,Chunying Zhu,Youguang Ma
Efficient and low-energy absorbents are always desirable to control the greenhouse effect. In this study, a novel amino polycarboxylate ionic liquid absorbent is constructed by introducing carboxylate groups. The CO 2 absorption-desorption experiments in microchannel and macroscopic devices are performed to comprehensively investigate the performance of choline iminodiacetate ([Ch] 2 [IDA]). It is found that [Ch] 2 [IDA] could form soluble carbamic acid upon CO 2 absorption, thereby effectively preventing equipment blocking compared to choline glycine ([Ch][Gly]). The dual carboxyl groups in [IDA] 2− could generate a synergistic effect to weaken the negative inductive action of the amino group; consequently, [Ch] 2 [IDA] displays superior CO 2 absorption performance over [Ch][Gly]. Furthermore, [Ch] 2 [IDA] aqueous solution could release more CO 2 in the rapid desorption stage and effectively alleviate the sharp increase of energy consumption during the desorption termination period. Especially, it exhibits excellent cycling stability. Comparatively, [Ch] 2 [IDA] aqueous solution demonstrates great potential as a next-generation efficient and low-energy CO 2 absorbent.
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2026
·
IF 8.2
Shihan Wang,Weike Zheng,Haifeng Shi,Yigang Chen
In peroxymonosulfate (PMS) activation processes, the relatively slow redox kinetics of metal ions have been a key factor limiting both PMS activation efficiency and photocatalytic performance. In this study, a Co 3 O 4 /PTFE composite with integrated piezoelectric and photothermal properties was successfully constructed, which significantly enhanced the Co 3+ /Co 2+ cycle and thereby promoted PMS activation for efficient tetracycline (TC) degradation. Under the dual stimulation of mechanical agitation and visible light irradiation, the Co 3 O 4 /PTFE composite exhibited enhanced photothermal conversion and piezoelectric performance, which significantly promoted the generation of reactive species such as SO 4 •- and •OH. Compared with pristine Co 3 O 4 , CoP-2 demonstrated a superior TC degradation efficiency of up to 83% in the PMS system. X-ray photoelectron spectroscopy (XPS) analysis revealed that the introduction of polytetrafluoroethylene (PTFE) induced interfacial strain, modulated the valence state of cobalt species, and optimized the surface electronic structure, thereby facilitating the formation of active sites and enhancing electron transfer processes. Free radical trapping experiments further identified the dominant reactive species and revealed the underlying synergistic catalytic mechanism. Moreover, CoP-2 maintained excellent stability after multiple degradation cycles. This study provides a novel strategy for the design of multifunctional synergistic catalysts and expands the application potential of piezo-photothermal/PMS systems in environmental purification.
✓ 已验证
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Gujie Yao,Xilai Wang,Yanyan Feng,Xiaoqing Wang,Da Jin,Xue you Wen,Zhixiang Fu,Tianxiang Guo
A promising dual-coping Ag,S-Cu x O/Cu foam electrocatalyst was synthesized for CO 2 RR. • The synergistic effect of Ag and S for CO 2 RR toward HCOOH and CH 3 OH was elucidated. • The Ag-S synergistic mechanism governing HCOOH and CH 3 OH formation was revealed. The electrochemical reduction of CO 2 into value-added fuels such as formic acid and methanol presents a promising approach to mitigating climate change, yet it is constrained by the rational design of efficient electrocatalysts and the understanding of structure-efficiency relationships. Here, a highly efficient Ag,S-Cu x O/Cu catalyst was developed via a facile in situ dual-doping strategy, incorporating Ag and S onto pre-oxidized copper foam. Comprehensive multimodal characterization (SEM, EDS, XRD, XPS, AES) and electrochemical measurements (LSV, EIS, GC, 1 H NMR) were conducted to elucidate the catalyst’s structural properties and CO 2 reduction performance. Results indicate that Ag/S dual doping synergistically enhances catalytic activity by reducing solution mass transfer resistance through improved catalyst nanostructures and expanding the electrochemical active surface area (ECSA). Ag incorporation effectively suppresses the competitive hydrogen evolution reaction (HER), while S incorporation lowers charge transfer resistance ( R ct ). Compared with the Cu x O/Cu foam catalyst, the Ag,S-Cu x O/Cu foam catalyst exhibits increased partial current densities for formic acid (HCOOH) and methanol (CH 3 OH) by 17.09 and 5.70 mA·cm −2 , respectively. Furthermore, the reaction pathways for the electrochemical conversion of CO 2 to HCOOH and CH 3 OH are systematically elucidated. This study proposes a dual-doping strategy to achieve sustainable CO 2 electroreduction and delivers fundamental insights into the external parameters that govern the selective formation of high-value products. Download: Download high-res image (142KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2026
·
IF 4
Longbo Zhang,Jia Guo,Yanyan Wang,Ying Wang,Jie Li,Hongxing Wang,Chenglong Yu,Yanru Zhang,Jun He,Xianyu Meng,Zhuo Zhang,Tianbin Wu,Qingli Qian,Li Tan,Buxing Han
Homogeneously catalyzed ethanol synthesis from CO2 and H2 usually uses expensive, unstable and complex catalyst precursors, hindering their industrial viability. In this work, a homogeneous catalytic system consisting of economic and stable catalyst precursors (RuCl3·3H2O and CoCl2·6H2O), cocatalyst (LiI) and N-ethyl-2-pyrrolidone (NEP) solvent was designed to accelerate ethanol production via methanol homologation with CO2 and H2. After activation of the catalyst precursors at 200 °C with CO, the target reaction could proceed efficiently under mild conditions (170 °C), with top level reaction selectivity (64.9%) and much higher space time yield (STY) of ethanol (3.9 g L−1 h−1) compared to previous reports with Ru/Co catalysts. The impact of activation conditions, reaction conditions, and the catalytic mechanism of the reaction were studied by a series of control experiments. This method of ethanol production has the advantages of a stable and easily available catalyst, excellent performance, and easy separation and recycling of the catalyst, showing great potential for industrialization.
✓ 已验证
DOI
高影响因子